# BeagleConnect QuadESC 4-channel BLDC motor controller uses TI's AM13E23019-based Torque module

DevFeed: [BeagleConnect QuadESC 4-channel BLDC motor controller uses TI's AM13E23019-based Torque module](<https://devfeed.tech/articles/beagleconnect-quadesc-4-channel-bldc-motor-controller-uses-ti-s-am13e23019-based-torque-module-105875.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/29/beagleconnect-quadesc-4-channel-bldc-motor-controller-ti-am13e23019-based-torque-module/>)

Author: Debashis Das

Published: 2026-10-29T00:00:24Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [tinyml](<https://devfeed.tech/topics/tinyml.md>)

Tags: [adc](<https://devfeed.tech/tags/adc.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-applications](<https://devfeed.tech/tags/ai-applications.md>), [arm](<https://devfeed.tech/tags/arm.md>), [battery](<https://devfeed.tech/tags/battery.md>), [beagleboard](<https://devfeed.tech/tags/beagleboard.md>), [can](<https://devfeed.tech/tags/can.md>), [controller](<https://devfeed.tech/tags/controller.md>), [cortex-m33](<https://devfeed.tech/tags/cortex-m33.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [freertos](<https://devfeed.tech/tags/freertos.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [inyml](<https://devfeed.tech/tags/inyml.md>), [mcu](<https://devfeed.tech/tags/mcu.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [module](<https://devfeed.tech/tags/module.md>), [motor](<https://devfeed.tech/tags/motor.md>), [motor-control](<https://devfeed.tech/tags/motor-control.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [openocd](<https://devfeed.tech/tags/openocd.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [sensing](<https://devfeed.tech/tags/sensing.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [software](<https://devfeed.tech/tags/software.md>), [som](<https://devfeed.tech/tags/som.md>), [texas-instruments](<https://devfeed.tech/tags/texas-instruments.md>), [ti](<https://devfeed.tech/tags/ti.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>), [zephyr-os](<https://devfeed.tech/tags/zephyr-os.md>)

## AI overview

BeagleBoard.org's open-source QuadESC pairs a BeagleConnect Torque SoM with four three-phase BLDC motor channels for robotics and other multi-motor systems. It supports 3S-6S batteries, synchronized current sensing for FOC, phase-voltage and temperature monitoring, CAN-FD, and a flight-controller interface with DShot and telemetry signals. The Torque module uses a 200 MHz TI AM13E23019 Cortex-M33 and can also be used on custom carrier boards; it needs regulated carrier power, a separate analog reference for ADC measurements, and 5V for CAN. The board's stated 40A continuous and 70A burst targets are unverified and depend on cooling and load duration. It does not include ready-to-use motor-control firmware, so developers must implement motor control, driver setup, sensing, and fault handling. Hardware designs, firmware sources, and documentation are provided; pricing and availability have not been announced.

## Source excerpt

BeagleBoard.org has introduced the BeagleConnect QuadESC, an open-source 4-channel BLDC motor controller/carrier board built around the BeagleConnect Torque SoM. The SoM features TI's 200 MHz AM13E23019 Arm Cortex-M33 microcontroller with a trigonometric math unit (TMU) and a TinyEngine neural-network accelerator for edge AI applications. The QuadESC carrier board supports four three-phase BLDC motor outputs, twelve current and twelve voltage sensing channels, four temperature sensors, and battery voltage monitoring. It also includes an eight-pin flight controller connector with DShot, telemetry, and current reporting signals, along with SWD debugging, a buzzer connector, and onboard power regulation. BeagleConnect Torque SoM The Torque SoM can also be integrated with custom carrier boards for robotics, motor control, and CAN-connected applications. It provides the processing, sensing, and communication interfaces, while external hardware supplies the motor power . Specifications: Main MCU- Texas Instruments AM13E23019 CPU core - Arm Cortex-M33 MCU @ 200 MHz with FPU Memory - [...] The post BeagleConnect QuadESC 4-channel BLDC motor controller uses TI's AM13E23019-based Torque module appeared first on CNX Software - Embedded Systems News.