# Build Your Own E-Reader for $40

DevFeed: [Build Your Own E-Reader for $40](<https://devfeed.tech/articles/build-your-own-e-reader-for-40-122273.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/07/build-your-own-e-reader-for-40/>)

Author: Ben

Published: 2026-11-07T21:03:06Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Learning](<https://devfeed.tech/topics/learning.md>), [MicroPython](<https://devfeed.tech/topics/micropython.md>)

Tags: [adapter](<https://devfeed.tech/tags/adapter.md>), [board](<https://devfeed.tech/tags/board.md>), [build](<https://devfeed.tech/tags/build.md>), [bus](<https://devfeed.tech/tags/bus.md>), [button](<https://devfeed.tech/tags/button.md>), [dev](<https://devfeed.tech/tags/dev.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [e-reader](<https://devfeed.tech/tags/e-reader.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [flash](<https://devfeed.tech/tags/flash.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [guide](<https://devfeed.tech/tags/guide.md>), [how-tos](<https://devfeed.tech/tags/how-tos.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [module](<https://devfeed.tech/tags/module.md>), [navigation](<https://devfeed.tech/tags/navigation.md>), [optional](<https://devfeed.tech/tags/optional.md>), [panel](<https://devfeed.tech/tags/panel.md>), [power](<https://devfeed.tech/tags/power.md>)

## AI overview

The build uses an ESP32-S3 dev board, an e-paper panel and adapter, a five-way button module, and a power source; the excerpt estimates total cost at $35-$60, depending on the panel. The ESP32-S3 is chosen for built-in Wi-Fi, flash for storing books, and hardware SPI to drive the display. Boards with 8 MB or 16 MB flash are recommended in the source; 4 MB can work but leaves little room for text. The buttons connect through a shared ground and five GPIO signal pins. A BME280 sensor is an optional add-on for temperature and humidity on the status line.

## Source excerpt

Allan Binder of MUON SORTES shares this how to guide for building an affordable e-reader. And head to Allan Binder's instagram for a more polished look and future iterations. You need four things: an ESP32-S3 dev board, an e-paper panel with its adapter board, a five-way button module, and a way to power it. Total [...]