# Elegant Standing Reindeer Decor #3DThursday #3DPrinting

DevFeed: [Elegant Standing Reindeer Decor #3DThursday #3DPrinting](<https://devfeed.tech/articles/elegant-standing-reindeer-decor-3dthursday-3dprinting-131089.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/12/elegant-standing-reindeer-decor-3dthursday-3dprinting/>)

Author: Pedro

Published: 2026-11-13T01:00:05Z

Content type: release

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [3dprinting](<https://devfeed.tech/tags/3dprinting.md>), [3dthursday](<https://devfeed.tech/tags/3dthursday.md>), [christmas](<https://devfeed.tech/tags/christmas.md>), [easy](<https://devfeed.tech/tags/easy.md>), [file](<https://devfeed.tech/tags/file.md>), [layer](<https://devfeed.tech/tags/layer.md>), [license](<https://devfeed.tech/tags/license.md>), [patreon](<https://devfeed.tech/tags/patreon.md>), [plate](<https://devfeed.tech/tags/plate.md>), [shelves](<https://devfeed.tech/tags/shelves.md>), [standard](<https://devfeed.tech/tags/standard.md>), [support](<https://devfeed.tech/tags/support.md>), [tables](<https://devfeed.tech/tags/tables.md>), [winter](<https://devfeed.tech/tags/winter.md>)

## AI overview

PinkyWings' standing reindeer is a Christmas and winter decoration intended for tables, shelves, or mantels. It stands without support material, is described as easy to print, and comes in three sizes. The stated profile uses a 0.2 mm layer height, two walls, and 5-8% infill; estimated print times range from about 56 minutes to 3.1 hours on one plate. The excerpt notes a standard digital file license and says Patreon is required for commercial use.

## Source excerpt

pinkywings shares: A Christmas + winter decor piece with flowing, detailed lines -- meant as a centerpiece for tables, shelves, or mantels. Stands without support material; described as easy to print. 3 sizes available. Print profiles: ~56 min to 3.1h on 1 plate, 0.2mm layer, 2 walls, 5-8% infill. Standard Digital File License (Patreon for [...]