# GitHub - ankur608/ArduinoUnoQ\_AdafruitTouch

DevFeed: [GitHub - ankur608/ArduinoUnoQ\_AdafruitTouch](<https://devfeed.tech/articles/github-ankur608-arduinounoq-adafruittouch-98845.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/24/github-ankur608-arduinounoq_adafruittouch/>)

Author: Anne Barela

Published: 2026-10-24T14:28:12Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [UNO Q](<https://devfeed.tech/topics/uno-q.md>), [GitHub](<https://devfeed.tech/topics/github.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [adafruit](<https://devfeed.tech/tags/adafruit.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [arduino-ide](<https://devfeed.tech/tags/arduino-ide.md>), [arduino-uno-q](<https://devfeed.tech/tags/arduino-uno-q.md>), [capacitive](<https://devfeed.tech/tags/capacitive.md>), [capacitive-touch](<https://devfeed.tech/tags/capacitive-touch.md>), [controller](<https://devfeed.tech/tags/controller.md>), [dependencies](<https://devfeed.tech/tags/dependencies.md>), [displays](<https://devfeed.tech/tags/displays.md>), [driver](<https://devfeed.tech/tags/driver.md>), [examples](<https://devfeed.tech/tags/examples.md>), [github](<https://devfeed.tech/tags/github.md>), [install](<https://devfeed.tech/tags/install.md>), [installation](<https://devfeed.tech/tags/installation.md>), [library](<https://devfeed.tech/tags/library.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [pin](<https://devfeed.tech/tags/pin.md>), [software](<https://devfeed.tech/tags/software.md>), [spi](<https://devfeed.tech/tags/spi.md>), [tft](<https://devfeed.tech/tags/tft.md>), [uno-q](<https://devfeed.tech/tags/uno-q.md>)

## AI overview

The ArduinoUnoQ_AdafruitTouch library adapts Adafruit's 2.8-inch capacitive TFT Touch Shield v2 (PID 1947) for the Arduino UNO Q. It maps the shield's ICSP SPI lines to UNO Q pins MOSI 23, MISO 22, and SCK 24, initializes the FT6206 over I2C, and transforms its portrait 240 x 320 touch readings to match the selected screen rotation. Install it by cloning into the Arduino libraries directory or using the Git URL; core Adafruit driver dependencies are also required. Arduino IDE examples include 1-bit Floyd-Steinberg-dithered manga panels. The project is MIT licensed.

## Source excerpt

Developer ankur608 has published an open source Arduino library on GitHub for using the Adafruit 2.8″ TFT Touch Shield v2 with Capacitive Touch (PID 1947) on the Arduino UNO Q, which runs an STM32U585 core. The shield carries its SPI lines on the 6-pin ICSP header rather than pins 11 through 13. On the UNO [...]