# New open source hardware UEXT module adds 100MB Ethernet to PICO, PICO2 and all ESP32s lacking wired Ethernet

DevFeed: [New open source hardware UEXT module adds 100MB Ethernet to PICO, PICO2 and all ESP32s lacking wired Ethernet](<https://devfeed.tech/articles/new-open-source-hardware-uext-module-adds-100mb-ethernet-to-pico-pico2-and-all-esp32s-lacking-wired-ethernet-117115.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/04/new-open-source-hardware-uext-module-adds-100mb-ethernet-to-pico-pico2-and-all-esp32s-lacking-wired-ethernet/>)

Author: Anne Barela

Published: 2026-11-04T16:44:08Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Ethernet](<https://devfeed.tech/topics/ethernet.md>), [kicad](<https://devfeed.tech/topics/kicad.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [controller](<https://devfeed.tech/tags/controller.md>), [driver](<https://devfeed.tech/tags/driver.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [example](<https://devfeed.tech/tags/example.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [kicad](<https://devfeed.tech/tags/kicad.md>), [module](<https://devfeed.tech/tags/module.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-hardware](<https://devfeed.tech/tags/open-source-hardware.md>), [pico](<https://devfeed.tech/tags/pico.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [spi](<https://devfeed.tech/tags/spi.md>), [uext](<https://devfeed.tech/tags/uext.md>), [wch](<https://devfeed.tech/tags/wch.md>), [wired](<https://devfeed.tech/tags/wired.md>)

## AI overview

Olimex's UEXT-CH390 adds 100 Mbit wired Ethernet to boards with UEXT or pUEXT connectors, using a WCH CH390 SPI-to-Ethernet controller. It supports Raspberry Pi PICO/PICO2 and ESP32 variants without wired Ethernet MACs, including S3, C3, C5 and C6. Arduino and ESPHome support CH390, but ESPHome's support was limited to ESP32, so Olimex wrote an RP2040 driver. The excerpt describes an ESPHome example pinned to a version of the Ethernet component and tested with ESPHome 2026.9.0, a flashable UF2 that appears in Home Assistant, and a Pico SDK/lwIP web-server example. KiCad sources, schematic and firmware are published. The 50 x 21 mm module has both UEXT and smaller pUEXT headers; it is listed at 4.95 EUR for pre-order, with shipping from 9 November 2026.

## Source excerpt

Olimex has announced UEXT-CH390 on the company blog, a small open source hardware module that adds 100 Mbit wired Ethernet to any board with a UEXT or pUEXT connector. UEXT is Olimex's own connector standard for add-on boards. The module uses the WCH CH390 SPI-to-Ethernet controller, measures 50 x 21 mm, and carries both the [...]