# Print & Place: adding embedded electronics while FDM printing

DevFeed: [Print & Place: adding embedded electronics while FDM printing](<https://devfeed.tech/articles/print-place-adding-embedded-electronics-while-fdm-printing-129523.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/11/print-place-adding-embedded-electronics-while-fdm-printing/>)

Author: Anne Barela

Published: 2026-11-11T19:37:56Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [3D](<https://devfeed.tech/topics/3d.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [engineering](<https://devfeed.tech/tags/engineering.md>), [fdm](<https://devfeed.tech/tags/fdm.md>), [pick-and-place](<https://devfeed.tech/tags/pick-and-place.md>), [print-place](<https://devfeed.tech/tags/print-place.md>), [printing](<https://devfeed.tech/tags/printing.md>), [projects](<https://devfeed.tech/tags/projects.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>)

## AI overview

Print & Place embeds electronics during an FDM print by using a dab of molten thermoplastic as temporary adhesive: added G-code picks up a component from a parametrically generated tray printed beside the part, places it, and later layers cover it. The method uses a regular, unmodified FDM printer without a custom tool head. Demonstrations included pre-populated PCBs, conductive wire and braid, and rivets joining conductive traces. The system is open loop, with reported pick failures, placement misalignment, and inconsistent contacts; the authors suggest a camera could provide feedback. The excerpt does not describe further implementation details.

## Source excerpt

Maya Posch writes at Hackaday about Print & Place, a method from Oliver Child and colleagues for embedding electronic parts into a 3D print while the print is still running. It works on a regular FDM printer without modifications, and it doesn't need a custom tool head. The trick is the thermoplastic itself: a bit [...]