# RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

DevFeed: [RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars](<https://devfeed.tech/articles/radarcom-unlocking-simultaneous-communication-and-sensing-on-commodity-automotive-mmwave-radars-104199.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.36622>)

Author: Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen

Published: 2026-10-28T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [smartdevices](<https://devfeed.tech/topics/smartdevices.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Machine Perception](<https://devfeed.tech/topics/machine-perception.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>)

Tags: [automotive](<https://devfeed.tech/tags/automotive.md>), [communication](<https://devfeed.tech/tags/communication.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [sensing](<https://devfeed.tech/tags/sensing.md>)

## AI overview

RadarCom uses mutual interference between automotive mmWave radars as a carrier for direct radar-to-radar communication while preserving sensing. Its software techniques include slope-mismatch discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression. The system requires no radar hardware modification, waveform redesign, or infrastructure support. Implemented on TI AWR2243 radars, it was evaluated in static, dynamic, and challenging real-world conditions; the abstract reports a 5.55 kbps average effective data rate, symbol error rates below 1.5%, and sensing F1 scores up to 80.5% during concurrent communication.

## Source excerpt

arXiv:2610.36622v1 Announce Type: new Abstract: Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.