# Semtech LR2021 LoRa chip gets the SDR treatment, supports 100 MHz to 2.74 GHz

DevFeed: [Semtech LR2021 LoRa chip gets the SDR treatment, supports 100 MHz to 2.74 GHz](<https://devfeed.tech/articles/semtech-lr2021-lora-chip-gets-the-sdr-treatment-supports-100-mhz-to-2-74-ghz-90586.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/20/semtech-lr2021-lora-chip-gets-the-sdr-treatment-supports-100-mhz-to-2-74-ghz/>)

Author: Debashis Das

Published: 2026-10-20T07:00:17Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [communications](<https://devfeed.tech/topics/communications.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [lora](<https://devfeed.tech/topics/lora.md>), [meshtastic](<https://devfeed.tech/topics/meshtastic.md>)

Tags: [ble](<https://devfeed.tech/tags/ble.md>), [chip](<https://devfeed.tech/tags/chip.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hack](<https://devfeed.tech/tags/hack.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [i-q](<https://devfeed.tech/tags/i-q.md>), [lilygo](<https://devfeed.tech/tags/lilygo.md>), [lora](<https://devfeed.tech/tags/lora.md>), [lr2021](<https://devfeed.tech/tags/lr2021.md>), [messages](<https://devfeed.tech/tags/messages.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [radio](<https://devfeed.tech/tags/radio.md>), [receiver](<https://devfeed.tech/tags/receiver.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [sdr](<https://devfeed.tech/tags/sdr.md>), [semtech](<https://devfeed.tech/tags/semtech.md>), [software-defined-radio](<https://devfeed.tech/tags/software-defined-radio.md>), [transceiver](<https://devfeed.tech/tags/transceiver.md>), [voice](<https://devfeed.tech/tags/voice.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

## AI overview

The open-source LR2021-SDR project uses an undocumented ROM command to expose raw I/Q samples from Semtech's LR2021 transceiver, enabling software decoding of P25 voice, POCSAG pager messages, and analog FM without an external SDR dongle. Tests on one board demonstrated reception from 100 MHz to 2.74 GHz, though the results do not establish calibrated sensitivity or coverage on other hardware. I/Q capture rates above 250,000 complex samples per second overflowed the FIFO, and transmission remains limited to short bursts.

## Source excerpt

Earlier this month, we saw how the humble ESP32-S3 could be turned into an SDR transmitter and receiver; then we saw developer h0m3us3r release the w1700k-sdr project, which turns a Gemtek W1700K Wi-Fi 7 router into a wideband SDR receiver. The LR2021-SDR open-source project by Samuel Reynolds (SAMS0N1TE) follows the sample principles and turns the Semtech LR2021 LoRa transceiver into a software-defined radio (SDR) capable of receiving signals from 100 MHz to 2.74 GHz. Using an undocumented command in the chip's ROM, this project exposes raw 16-bit I/Q samples, allowing software to decode P25 Phase 1 digital voice, POCSAG pager messages, and analog FM signals without an external SDR dongle. LR2021-SDR firmware features: Supported hardware - Semtech LR2021 running ROM 1.24; not compatible with the SX1262 variant for raw I/Q access. Receive frequency range - 100 MHz to 2.74 GHz (experimentally tested), extending beyond the datasheet's specified 150-960 MHz and 1.5-2.5 [...] The post Semtech LR2021 LoRa chip gets the SDR treatment, supports 100 MHz to 2.74 GHz appeared first on CNX Software - Embedded Systems News.