# Building Two Custom Mini Network Racks with UniFi Gear

DevFeed: [Building Two Custom Mini Network Racks with UniFi Gear](<https://devfeed.tech/articles/the-mini-network-rack-ubiquiti-should-make-10611.md>)

Original publisher: [Read original article](<https://technotim.com/posts/network-mini-rack/>)

Author: Techno Tim

Published: 2025-02-16T13:00:00Z

Content type: article

Language: en

Sources: [Techno Tim](<https://devfeed.tech/sources/techno-tim.md>)

Topics: [networking](<https://devfeed.tech/topics/networking.md>), [Homelab](<https://devfeed.tech/topics/homelab.md>), [Ubiquiti](<https://devfeed.tech/topics/ubiquiti.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>)

Tags: [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [homelab](<https://devfeed.tech/tags/homelab.md>), [network](<https://devfeed.tech/tags/network.md>), [networking](<https://devfeed.tech/tags/networking.md>), [products](<https://devfeed.tech/tags/products.md>), [ubiquiti](<https://devfeed.tech/tags/ubiquiti.md>), [unifi](<https://devfeed.tech/tags/unifi.md>), [unifi-cloud-gateway](<https://devfeed.tech/tags/unifi-cloud-gateway.md>), [video](<https://devfeed.tech/tags/video.md>)

## AI overview

Techno Tim presents two custom mini network racks built around UniFi equipment, including switches, gateways, access points, cameras, and related accessories. The article also identifies 3D-printed items used in the racks and notes that DeskPi provided a mini rack without editorial input.

## Source excerpt

After building a mini rack that included an entire Homelab, I decided to build 2 more custom mini racks that focus solely on networking. 📺 Watch Video Info Thank you to DeskPi for sending this mini rack. Note: I was not paid to make this video nor did DeskPi or Ubiquiti have any input. I just love racks of all sizes and UniFi gear fits nicely in it, not to mention there are quite a few 3D...