# Turning a Wi-Fi Adapter into an SDR

DevFeed: [Turning a Wi-Fi Adapter into an SDR](<https://devfeed.tech/articles/turning-a-wi-fi-adapter-into-an-sdr-89696.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/18/turning-a-wi-fi-adapter-into-an-sdr/>)

Author: Aaron Beckendorf

Published: 2026-10-18T08:00:22Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [Wi-Fi](<https://devfeed.tech/topics/wi-fi.md>), [Undocumented feature](<https://devfeed.tech/topics/undocumented-feature.md>), [input](<https://devfeed.tech/topics/input.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>)

Tags: [bandwidth](<https://devfeed.tech/tags/bandwidth.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [i-q](<https://devfeed.tech/tags/i-q.md>), [interface](<https://devfeed.tech/tags/interface.md>), [mediatek](<https://devfeed.tech/tags/mediatek.md>), [monitor-mode](<https://devfeed.tech/tags/monitor-mode.md>), [radio-hacks](<https://devfeed.tech/tags/radio-hacks.md>), [raw](<https://devfeed.tech/tags/raw.md>), [sdr](<https://devfeed.tech/tags/sdr.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>)

## AI overview

Two independent projects have adapted the MediaTek MT7921AU Wi-Fi adapter for software-defined radio use by accessing its raw I/Q sampling features. BirriaSDR streams samples over libusb without permanent firmware changes, while Mtk79ICAP uses a modified driver and firmware changes, offering wider bandwidth and 5 GHz tuning. The adapter can also operate in monitor mode while streaming SDR data when automatic gain control is enabled.

## Source excerpt

Since the discovery of an undocumented I/Q sampling feature in ESP32 chips about two weeks ago, there's been a flood of similar features being found in other wireless chips, including ...read more