# Adafruit Industries

electronics, open source hardware, hacking and more...

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## ESP32 drivers for tri-color e-paper panels from SES-imagotag shelf labels

DevFeed: [ESP32 drivers for tri-color e-paper panels from SES-imagotag shelf labels](<https://devfeed.tech/articles/esp32-drivers-for-tri-color-e-paper-panels-from-ses-imagotag-shelf-labels-146357.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/20/esp32-drivers-for-tri-color-e-paper-panels-from-ses-imagotag-shelf-labels/>)

Author: Anne Barela

Published: 2026-11-20T15:37:23Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>)

Tags: [adafruit-daily](<https://devfeed.tech/tags/adafruit-daily.md>), [adafruit-gfx](<https://devfeed.tech/tags/adafruit-gfx.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [arduino-library](<https://devfeed.tech/tags/arduino-library.md>), [displays](<https://devfeed.tech/tags/displays.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [github](<https://devfeed.tech/tags/github.md>), [gxepd2](<https://devfeed.tech/tags/gxepd2.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>)

### AI overview

SesEpaper is an Arduino library for ESP32 that drives three black, white and red SES-imagotag panels: the 7.4-inch E2741ES083, 5.65-inch E2565JS0B1 (VUSION 6.0), and 4.2-inch E2417JS0D1. Built on Adafruit GFX, it supports familiar drawing calls. The 7.4- and 5.65-inch panels use command sets unsupported by GxEPD2 and similar libraries; the 4.2-inch works with GxEPD2, but without temperature setting, which controls the drive curve and affects black darkness. The library also includes browser-flashable diagnostic firmware to read chip ID and OTP data and identify an unknown panel. Its 5.65-inch driver reads OTP at startup for image window, timing, and high-voltage ramp settings. Demo cleaning cycles address ghost images on salvaged panels. Documentation is in German.

### Source excerpt

DocBigs Lab has published SesEpaper on GitHub, an Arduino library for ESP32 boards that drives the black, white and red e-paper panels found in SES-imagotag electronic shelf labels. Three panels are supported: a 7.4″ E2741ES083, a 5.65″ E2565JS0B1 (VUSION 6.0) and a 4.2″ E2417JS0D1. The library is built on Adafruit GFX, so the usual drawing [...]

## A custom game launcher and firmware toolkit for the My Arcade Contra Pocket Player

DevFeed: [A custom game launcher and firmware toolkit for the My Arcade Contra Pocket Player](<https://devfeed.tech/articles/a-custom-game-launcher-and-firmware-toolkit-for-the-my-arcade-contra-pocket-player-146355.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/20/a-custom-game-launcher-and-firmware-toolkit-for-the-my-arcade-contra-pocket-player/>)

Author: Anne Barela

Published: 2026-11-20T15:31:20Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [GitHub](<https://devfeed.tech/topics/github.md>)

Tags: [a7](<https://devfeed.tech/tags/a7.md>), [application](<https://devfeed.tech/tags/application.md>), [arcade](<https://devfeed.tech/tags/arcade.md>), [arm](<https://devfeed.tech/tags/arm.md>), [contra](<https://devfeed.tech/tags/contra.md>), [core](<https://devfeed.tech/tags/core.md>), [cortex](<https://devfeed.tech/tags/cortex.md>), [custom](<https://devfeed.tech/tags/custom.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [firmware-modding](<https://devfeed.tech/tags/firmware-modding.md>), [flash](<https://devfeed.tech/tags/flash.md>), [game](<https://devfeed.tech/tags/game.md>), [gaming](<https://devfeed.tech/tags/gaming.md>), [github](<https://devfeed.tech/tags/github.md>), [graphics](<https://devfeed.tech/tags/graphics.md>), [handheld](<https://devfeed.tech/tags/handheld.md>), [launcher](<https://devfeed.tech/tags/launcher.md>), [modding](<https://devfeed.tech/tags/modding.md>), [nand](<https://devfeed.tech/tags/nand.md>), [nand-flash](<https://devfeed.tech/tags/nand-flash.md>), [projects](<https://devfeed.tech/tags/projects.md>), [rk3128](<https://devfeed.tech/tags/rk3128.md>), [toolkit](<https://devfeed.tech/tags/toolkit.md>), [vintage-computing](<https://devfeed.tech/tags/vintage-computing.md>)

### AI overview

Rob Simon's toolkit replaces the Contra Pocket Player's stock launcher with a MiniGUI app that scans ROM ZIPs and presents a scrollable menu. A Docker-based build uses the device-compatible Buildroot 2018.02.12 cross-compiler and handles squashfs packing so case-sensitive symlinks survive on macOS; it extracts firmware, builds the launcher, adds ROMs, and creates a flashable 128 MB NAND image. Dumping and flashing use rkflashtool over USB in RockUSB Mask ROM mode, entered by holding Volume Up during power-on. Emulation uses the FBAlpha libretro core, so ROM sets must match that version. Storage is a key limit: the 65 MiB rootfs partition has about 15 MiB free after the stock firmware's roughly 50 MiB.

### Source excerpt

Rob Simon published a firmware modding toolkit on GitHub for the My Arcade Contra Pocket Player. The handheld runs a Rockchip RK3128 (quad-core ARM Cortex-A7 with Mali400 MP2 graphics), 128 MB of SPI NAND flash and a 240x320 portrait screen. The mod swaps the stock game launcher for a custom MiniGUI application that scans for [...]

## Ask an Engineer - Raspberry Pi Official Magazine issue 172

DevFeed: [Ask an Engineer - Raspberry Pi Official Magazine issue 172](<https://devfeed.tech/articles/ask-an-engineer-raspberry-pi-official-magazine-issue-172-146325.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/20/ask-an-engineer-raspberry-pi-official-magazine-issue-172/>)

Author: Anne Barela

Published: 2026-11-20T14:32:42Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Cyberdecks](<https://devfeed.tech/topics/cyberdecks.md>)

Tags: [4g](<https://devfeed.tech/tags/4g.md>), [advice](<https://devfeed.tech/tags/advice.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [board](<https://devfeed.tech/tags/board.md>), [builds](<https://devfeed.tech/tags/builds.md>), [compute-module](<https://devfeed.tech/tags/compute-module.md>), [compute-module-4](<https://devfeed.tech/tags/compute-module-4.md>), [computer](<https://devfeed.tech/tags/computer.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [documentation](<https://devfeed.tech/tags/documentation.md>), [engineer](<https://devfeed.tech/tags/engineer.md>), [engineers](<https://devfeed.tech/tags/engineers.md>), [history](<https://devfeed.tech/tags/history.md>), [interviews](<https://devfeed.tech/tags/interviews.md>), [issue](<https://devfeed.tech/tags/issue.md>), [linux](<https://devfeed.tech/tags/linux.md>), [makers](<https://devfeed.tech/tags/makers.md>), [ouija](<https://devfeed.tech/tags/ouija.md>), [projects](<https://devfeed.tech/tags/projects.md>), [publications](<https://devfeed.tech/tags/publications.md>), [range](<https://devfeed.tech/tags/range.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [raspberry-pi-official-magazine](<https://devfeed.tech/tags/raspberry-pi-official-magazine.md>), [uconsole](<https://devfeed.tech/tags/uconsole.md>)

### AI overview

Issue 172 pairs interviews with Raspberry Pi board designers, offering their advice for makers, with hands-on projects: a Raspberry Pi-controlled ouija board, a WiFi- and Bluetooth-signal-feeding pet dragon built around a Raspberry Pi Zero 2 W, cyberdecks, and a crochet project using RGB LEDs and MicroPython. Its review covers the uConsole, a portable all-in-one Linux computer based on the Raspberry Pi Compute Module 4. The text says it runs Raspberry Pi OS, has an all-metal body and long battery life, and can be fitted with 4G connectivity. A festive gift guide and additional tutorials round out the issue.

### Source excerpt

Issue 172 of Raspberry Pi Official Magazine leads with Ask an Engineer, a set of interviews with the Raspberry Pi engineers who design the boards, collecting their advice for makers. The projects cover a range of builds. Kat Shann, a documentation specialist at Raspberry Pi, made a Raspberry Pi-controlled ouija board. Tara Carter built a [...]

## Study reveals data centers' long-distance damage to air quality

DevFeed: [Study reveals data centers' long-distance damage to air quality](<https://devfeed.tech/articles/study-reveals-data-centers-long-distance-damage-to-air-quality-144493.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/19/study-reveals-data-centers-long-distance-damage-to-air-quality/>)

Author: Anne Barela

Published: 2026-11-19T22:26:52Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [data centers](<https://devfeed.tech/topics/data-centers.md>)

Tags: [2023](<https://devfeed.tech/tags/2023.md>), [air-pollution](<https://devfeed.tech/tags/air-pollution.md>), [air-quality](<https://devfeed.tech/tags/air-quality.md>), [albert-chen](<https://devfeed.tech/tags/albert-chen.md>), [ammonia](<https://devfeed.tech/tags/ammonia.md>), [atmosphere](<https://devfeed.tech/tags/atmosphere.md>), [computers](<https://devfeed.tech/tags/computers.md>), [data-centers](<https://devfeed.tech/tags/data-centers.md>), [electricity](<https://devfeed.tech/tags/electricity.md>), [emissions](<https://devfeed.tech/tags/emissions.md>), [history](<https://devfeed.tech/tags/history.md>), [long-distance](<https://devfeed.tech/tags/long-distance.md>), [mit](<https://devfeed.tech/tags/mit.md>), [model](<https://devfeed.tech/tags/model.md>), [nevada](<https://devfeed.tech/tags/nevada.md>), [noelle-selin](<https://devfeed.tech/tags/noelle-selin.md>), [northern-virginia](<https://devfeed.tech/tags/northern-virginia.md>), [ohio](<https://devfeed.tech/tags/ohio.md>), [plants](<https://devfeed.tech/tags/plants.md>), [pollution](<https://devfeed.tech/tags/pollution.md>), [science](<https://devfeed.tech/tags/science.md>), [study](<https://devfeed.tech/tags/study.md>), [united-states](<https://devfeed.tech/tags/united-states.md>)

### AI overview

MIT researchers estimate that data center electricity demand caused about 650 premature deaths in the United States in 2023, around 5.3% of electricity-related deaths. They modeled hourly electricity production and nitrogen oxide and sulfur dioxide emissions from more than 10,000 generators, then used a chemical transport model to estimate how pollution forms and travels. Though demand was concentrated in northern Virginia and Texas, the highest per-person mortality rates were in Iowa, Nevada, South Dakota, and Kansas. The excerpt attributes this mismatch in part to older Ohio Valley coal and gas plants serving Virginia demand and to farm ammonia downwind, which increases fine particulate formation.

### Source excerpt

Adam Zewe at MIT News reports on a study from MIT researchers that traces the air quality effects of data centers far from the buildings themselves. The team estimates that the extra air pollution from data center electricity demand in 2023 led to about 650 premature deaths in the United States, roughly 5.3 percent of [...]

## LLM assisted reverse engineering

DevFeed: [LLM assisted reverse engineering](<https://devfeed.tech/articles/llm-assisted-reverse-engineering-144490.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/19/llm-assisted-reverse-engineering/>)

Author: Anne Barela

Published: 2026-11-19T22:17:09Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Reverse Engineering](<https://devfeed.tech/topics/reverse-engineering.md>), [Ghidra](<https://devfeed.tech/topics/ghidra.md>), [code analysis](<https://devfeed.tech/topics/code-analysis.md>), [Agent Skills](<https://devfeed.tech/topics/agent-skills.md>)

Tags: [ai-agents](<https://devfeed.tech/tags/ai-agents.md>), [ai-coding-agent](<https://devfeed.tech/tags/ai-coding-agent.md>), [assembly](<https://devfeed.tech/tags/assembly.md>), [csv](<https://devfeed.tech/tags/csv.md>), [debugging](<https://devfeed.tech/tags/debugging.md>), [decompilation](<https://devfeed.tech/tags/decompilation.md>), [ghidra](<https://devfeed.tech/tags/ghidra.md>), [github](<https://devfeed.tech/tags/github.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [large-language-models](<https://devfeed.tech/tags/large-language-models.md>), [log](<https://devfeed.tech/tags/log.md>), [markdown-files](<https://devfeed.tech/tags/markdown-files.md>), [mcp](<https://devfeed.tech/tags/mcp.md>), [programming](<https://devfeed.tech/tags/programming.md>), [radare2](<https://devfeed.tech/tags/radare2.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [skills](<https://devfeed.tech/tags/skills.md>), [software](<https://devfeed.tech/tags/software.md>)

### AI overview

The author uses an AI coding agent to analyze binaries and produce code overviews that would take much longer to assemble by hand from assembly. One published skill documents tools such as radare2 and a Ghidra MCP bridge, with 22 scripts for targeted decompilation; it addresses agents stopping early because they do not know how to run disassembly. A second skill makes a stuck agent state one testable hypothesis at a time and log results in a CSV loop, helping prevent random guessing and circular work. Findings are recorded in Markdown as the analysis proceeds.

### Source excerpt

ioma8 has been taking apart hardware and software for two decades, and in a post on slowchronicle.com describes how that work now runs with an AI coding agent doing the reading. The agent is pointed at the binary, along with a set of purpose-written skills, and it produces an overview of the code that would [...]

## Case for Adafruit 64x32 LED Matrix - MatrixPortal M4 + Diffuser Housing #3DThursday #3DPrinting

DevFeed: [Case for Adafruit 64x32 LED Matrix - MatrixPortal M4 + Diffuser Housing #3DThursday #3DPrinting](<https://devfeed.tech/articles/case-for-adafruit-64-32-led-matrix-matrixportal-m4-diffuser-housing-3dthursday-3dprinting-144276.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/19/case-for-adafruit-64x32-led-matrix-matrixportal-m4-diffuser-housing-3dthursday-3dprinting/>)

Author: Jessie Mae

Published: 2026-11-19T20:00:43Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [adafruit](<https://devfeed.tech/tags/adafruit.md>), [bus](<https://devfeed.tech/tags/bus.md>), [case](<https://devfeed.tech/tags/case.md>), [connectors](<https://devfeed.tech/tags/connectors.md>), [diffuser](<https://devfeed.tech/tags/diffuser.md>), [display](<https://devfeed.tech/tags/display.md>), [housing](<https://devfeed.tech/tags/housing.md>), [led](<https://devfeed.tech/tags/led.md>), [led-matrix](<https://devfeed.tech/tags/led-matrix.md>), [matrix](<https://devfeed.tech/tags/matrix.md>), [metro](<https://devfeed.tech/tags/metro.md>), [mini](<https://devfeed.tech/tags/mini.md>), [p4](<https://devfeed.tech/tags/p4.md>), [panel](<https://devfeed.tech/tags/panel.md>), [point](<https://devfeed.tech/tags/point.md>), [printers](<https://devfeed.tech/tags/printers.md>), [prusa](<https://devfeed.tech/tags/prusa.md>), [remix](<https://devfeed.tech/tags/remix.md>), [rgb](<https://devfeed.tech/tags/rgb.md>), [support](<https://devfeed.tech/tags/support.md>)

### AI overview

This two-piece case houses a P4 64x32 LED matrix panel (256x128 mm), an Adafruit MatrixPortal M4 behind it, and a 260x130 mm Adafruit diffuser (product 4749) in front. The original author used the setup to display Metro train and bus times. The remix adds support for mid-point connectors and is split to fit smaller printers such as the Prusa Mini. Printing requires supports; the listed settings are 0.16 mm layers, 2 walls, and 15% infill, with an estimated 6.2 hours and 188 g of PLA across two plates. Screws and an acrylic diffuser hold-down are used; double-sided dashes may be needed.

### Source excerpt

A case that holds a P4 64x32 LED RGB matrix panel (256x128mm), an Adafruit MatrixPortal M4 behind it, and an Adafruit diffuser (product 4749, 260x130mm) in front. Original author used it for a Metro train/bus times display. Printed in two pieces so it fits smaller printers (Prusa Mini). Remix adds support for mid-point connectors. Screws [...]

## Teaching robots to carve marble sculptures

DevFeed: [Teaching robots to carve marble sculptures](<https://devfeed.tech/articles/teaching-robots-to-carve-marble-sculptures-143718.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/19/teaching-robots-to-carve-marble-sculptures/>)

Author: Anne Barela

Published: 2026-11-19T15:05:20Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Robot Manipulation](<https://devfeed.tech/topics/robot-manipulation.md>), [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-model](<https://devfeed.tech/tags/3d-model.md>), [art](<https://devfeed.tech/tags/art.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [block](<https://devfeed.tech/tags/block.md>), [brooklyn](<https://devfeed.tech/tags/brooklyn.md>), [demo](<https://devfeed.tech/tags/demo.md>), [embodied-ai](<https://devfeed.tech/tags/embodied-ai.md>), [history](<https://devfeed.tech/tags/history.md>), [marble](<https://devfeed.tech/tags/marble.md>), [nyc](<https://devfeed.tech/tags/nyc.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [robots](<https://devfeed.tech/tags/robots.md>), [sculpture](<https://devfeed.tech/tags/sculpture.md>), [system](<https://devfeed.tech/tags/system.md>)

### AI overview

Monumental Labs uses KUKA KR240 robots to turn a 3D model and marble block into a sculpture without a person operating the machine. The software represents the stone as a sparse voxel grid, derives a signed distance field, and plans roughing passes to remove bulk material, including tilted passes for overhangs. Finishing removes the remaining stone in offset layers, with regional toolpaths following geodesic distances along the surface. It also calculates collision-free tool orientations and joint angles and simulates the full run before machining begins--a practical safeguard when the block is costly to machine.

### Source excerpt

Monumental Labs in Greenpoint, Brooklyn has put KUKA KR240 robots to work carving marble, and the team presented the system at Embodied AI NYC. It takes a 3D model and a block of stone and produces a finished sculpture without a person running the machine. The demo piece was a magic trick in marble: a [...]

## Can you replace a Synology NAS with open source projects?

DevFeed: [Can you replace a Synology NAS with open source projects?](<https://devfeed.tech/articles/can-you-replace-a-synology-nas-with-open-source-projects-141294.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/can-you-replace-a-synology-nas-with-open-source-projects/>)

Author: Anne Barela

Published: 2026-11-18T23:07:45Z

Content type: comparison

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Open Source](<https://devfeed.tech/topics/open-source.md>), [Synology](<https://devfeed.tech/topics/synology.md>), [truenas](<https://devfeed.tech/topics/truenas.md>), [Nextcloud](<https://devfeed.tech/topics/nextcloud.md>), [DiskStation](<https://devfeed.tech/topics/diskstation.md>)

Tags: [backup](<https://devfeed.tech/tags/backup.md>), [backups](<https://devfeed.tech/tags/backups.md>), [bare-metal](<https://devfeed.tech/tags/bare-metal.md>), [business](<https://devfeed.tech/tags/business.md>), [computers](<https://devfeed.tech/tags/computers.md>), [database](<https://devfeed.tech/tags/database.md>), [deduplication](<https://devfeed.tech/tags/deduplication.md>), [dsm](<https://devfeed.tech/tags/dsm.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hyper-backup](<https://devfeed.tech/tags/hyper-backup.md>), [immich](<https://devfeed.tech/tags/immich.md>), [internet-of-things](<https://devfeed.tech/tags/internet-of-things.md>), [license](<https://devfeed.tech/tags/license.md>), [nas](<https://devfeed.tech/tags/nas.md>), [networking](<https://devfeed.tech/tags/networking.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-projects](<https://devfeed.tech/tags/open-source-projects.md>), [open-source-software](<https://devfeed.tech/tags/open-source-software.md>), [storage](<https://devfeed.tech/tags/storage.md>), [synology](<https://devfeed.tech/tags/synology.md>), [synology-nas](<https://devfeed.tech/tags/synology-nas.md>), [truenas](<https://devfeed.tech/tags/truenas.md>)

### AI overview

Open source projects can cover much of a Synology NAS's functionality, but the excerpt identifies backup features that need extra work. TrueNAS SCALE is the closest storage match, with ZFS pools, SMB and NFS shares, iSCSI blocks and scrub tasks; OpenMediaVault is simpler to deploy. Nextcloud can stand in for Drive and Office, though it was found slow and buggy. Immich replaces Photos and was reported faster, without HEIC limits. rclone supports more cloud services than Cloud Sync, mostly through the command line, while motionEye is a known camera option. The excerpt identifies no open source equivalent to Active Backup for Business's bare-metal restores and deduplication. Reproducing Hyper Backup's application-consistent backups, which pair database dumps with file snapshots, takes separate work.

### Source excerpt

Julian Horsey at Geeky Gadgets covers a rundown from SpaceRex on how much of a Synology NAS can be rebuilt from open source software on your own hardware. Synology's DSM handles storage, users, networking and a set of applications on top, and the question is which open source projects cover the same ground. TrueNAS SCALE [...]

## An ESP32-S3 front panel for SPDIF

DevFeed: [An ESP32-S3 front panel for SPDIF](<https://devfeed.tech/articles/an-esp32-s3-front-panel-for-spdif-141293.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/an-esp32-s3-front-panel-for-spdif/>)

Author: Anne Barela

Published: 2026-11-18T22:54:55Z

Content type: release

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [audio](<https://devfeed.tech/tags/audio.md>), [control-panel](<https://devfeed.tech/tags/control-panel.md>), [dspi](<https://devfeed.tech/tags/dspi.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [labs](<https://devfeed.tech/tags/labs.md>), [link](<https://devfeed.tech/tags/link.md>), [music](<https://devfeed.tech/tags/music.md>), [panel](<https://devfeed.tech/tags/panel.md>), [processor](<https://devfeed.tech/tags/processor.md>), [s-pdif](<https://devfeed.tech/tags/s-pdif.md>), [sound](<https://devfeed.tech/tags/sound.md>), [source](<https://devfeed.tech/tags/source.md>), [spdif](<https://devfeed.tech/tags/spdif.md>), [version](<https://devfeed.tech/tags/version.md>)

### AI overview

Weeb Labs' DSPi front panel firmware v1.5.0 runs on an ESP32-S3 as a control panel and music source for the DSPi processor. It sends 24-bit, 44.1 or 48 kHz audio over a short, single-wire 3.3 V GPIO-level S/PDIF connection to the Pico's GPIO5 input, rather than consumer coaxial or optical gear. Music comes from microSD or up to four SMB shares; features include browsing, artwork, seeking, presets, EQ and crossover editors, BLE remote support, and display visualizations. User Volume controls listening level and loudness compensation; Master Volume attenuates all audio without changing it. Installation starts with a full USB image; later updates use the panel's local WiFi page and retain pairings, mappings, presets, and screen settings. That page also transfers music at about 0.45-0.60 MB/s.

### Source excerpt

Weeb Labs has released version 1.5.0 of the DSPi ESP32 front panel firmware on GitHub. It runs on an ESP32-S3 and acts as the control panel and music source for a WeebLabs DSPi digital signal processor. Audio goes to the DSPi over a single-wire S/PDIF link at 24-bit, 44.1 or 48 kHz. That link is [...]

## The Python Software Foundation's end-of-year fundraiser

DevFeed: [The Python Software Foundation's end-of-year fundraiser](<https://devfeed.tech/articles/the-python-software-foundation-s-end-of-year-fundraiser-141270.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/the-python-software-foundations-end-of-year-fundraiser/>)

Author: Anne Barela

Published: 2026-11-18T22:47:18Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Python](<https://devfeed.tech/topics/python.md>), [PyPI](<https://devfeed.tech/topics/pypi.md>), [code security](<https://devfeed.tech/topics/code-security.md>), [open source maintenance](<https://devfeed.tech/topics/open-source-maintenance.md>)

Tags: [board](<https://devfeed.tech/tags/board.md>), [community](<https://devfeed.tech/tags/community.md>), [computers](<https://devfeed.tech/tags/computers.md>), [developers](<https://devfeed.tech/tags/developers.md>), [development](<https://devfeed.tech/tags/development.md>), [foundation](<https://devfeed.tech/tags/foundation.md>), [intellectual-property](<https://devfeed.tech/tags/intellectual-property.md>), [programming](<https://devfeed.tech/tags/programming.md>), [pycon](<https://devfeed.tech/tags/pycon.md>), [pypi](<https://devfeed.tech/tags/pypi.md>), [python](<https://devfeed.tech/tags/python.md>), [python-software-foundation](<https://devfeed.tech/tags/python-software-foundation.md>), [security](<https://devfeed.tech/tags/security.md>)

### AI overview

Simon Willison, a Python Software Foundation board director, urges companies and people who benefit from Python to support the PSF's end-of-year fundraiser. The nonprofit manages Python's intellectual property and PyPI, sponsors core developer sprints and community events such as PyCon US, and employs staff to support this work. Its Developers in Residence program funds direct Python development; it now includes three security developers, with Brett Smith the latest hire, focused on Python, PyPI and the wider ecosystem.

### Source excerpt

Simon Willison, writing on his weblog, has announced the Python Software Foundation end-of-year fundraiser. He's a board director of the PSF, the non-profit that supports Python development and the Python community, and he's asking companies and people whose work benefits from Python to donate. The PSF looks after the intellectual property behind Python and operates [...]

## Bluetooth 7.0 specification ratified with HDT (High Data Throughput) support

DevFeed: [Bluetooth 7.0 specification ratified with HDT (High Data Throughput) support](<https://devfeed.tech/articles/bluetooth-7-0-specification-ratified-with-hdt-high-data-throughput-support-141266.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/bluetooth-7-0-specification-ratified-with-hdt-high-data-throughput-support/>)

Author: Anne Barela

Published: 2026-11-18T22:33:57Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>)

Tags: [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [specification](<https://devfeed.tech/tags/specification.md>), [throughput](<https://devfeed.tech/tags/throughput.md>)

### AI overview

The Bluetooth SIG ratified the Bluetooth 7.0 Core specification on November 3, 2026, making optional High Data Throughput (HDT) official. HDT raises the maximum bitrate to 7.5 Mbps and required changes across most Bluetooth LE stack layers; the Security Manager was left unchanged. In Nordic Semiconductor's test-chip demo, transmitting a 2 MB file averaged about 3.8 Mbps and took about 4 seconds over HDT7.5, compared with 1.4 Mbps and 12 seconds over LE 2M, and 0.76 Mbps and 22 seconds over LE 1M. The excerpt says LE 1M and 2M remain better choices for low-power work.

### Source excerpt

Jean-Luc Aufranc writes at CNX Software that the Bluetooth SIG ratified the Bluetooth 7.0 Core specification on November 3, 2026. The headline addition is optional HDT, or High Data Throughput, which raises the bitrate to as much as 7.5 Mbps. Early support had already appeared in Ceva's Links200 platform IP and Realtek's RTL8773J microcontroller, so [...]

## ch32fun: open source minimal stack for the ch32 and ch5xx WCH RISC-V microcontrollers

DevFeed: [ch32fun: open source minimal stack for the ch32 and ch5xx WCH RISC-V microcontrollers](<https://devfeed.tech/articles/ch32fun-open-source-minimal-stack-for-the-ch32-and-ch5xx-wch-risc-v-microcontrollers-141267.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/ch32fun-open-source-minimal-stack-for-the-ch32-and-ch5xx-wch-risc-v-microcontrollers/>)

Author: Anne Barela

Published: 2026-11-18T22:30:15Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [RISC-V](<https://devfeed.tech/topics/riscv.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [Visual Studio Code](<https://devfeed.tech/topics/visual-studio-code.md>)

Tags: [abstraction](<https://devfeed.tech/tags/abstraction.md>), [ch32](<https://devfeed.tech/tags/ch32.md>), [ch32v003](<https://devfeed.tech/tags/ch32v003.md>), [debugging](<https://devfeed.tech/tags/debugging.md>), [development-environment](<https://devfeed.tech/tags/development-environment.md>), [examples](<https://devfeed.tech/tags/examples.md>), [flash](<https://devfeed.tech/tags/flash.md>), [flashing](<https://devfeed.tech/tags/flashing.md>), [framework](<https://devfeed.tech/tags/framework.md>), [gcc](<https://devfeed.tech/tags/gcc.md>), [github](<https://devfeed.tech/tags/github.md>), [headers](<https://devfeed.tech/tags/headers.md>), [linux](<https://devfeed.tech/tags/linux.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [programming](<https://devfeed.tech/tags/programming.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [tooling](<https://devfeed.tech/tags/tooling.md>), [wch](<https://devfeed.tech/tags/wch.md>), [windows](<https://devfeed.tech/tags/windows.md>), [wsl](<https://devfeed.tech/tags/wsl.md>)

### AI overview

ch32fun is a minimal open-source development environment for the CH32V003 and other WCH RISC-V microcontrollers, including several CH32 families and recently the CH570-CH592. It provides tooling, headers, and examples for Windows, Linux, and WSL using gcc-riscv64. Instead of a hardware abstraction layer, projects write directly to reference-manual registers; the text says a blink example compiles to about 500 bytes. Flashing and debugging use minichlink, which writes at around 36 kBytes/sec and includes a gdbserver compatible with gdb-multiarch and Visual Studio Code. Builds can use PlatformIO with the ch32v003fun framework or plain makefiles from a template. The project leaves malloc to users, suggesting tinyalloc or libmemory when allocation is needed. The excerpt also describes the CH32V003 as a 48 MHz, 16 kB flash, 2 kB RAM part available in several packages.

### Source excerpt

tanakamasayuki's feed points to ch32fun, an open source development environment published on GitHub by the CH32 RISC-V User Group. It's tooling, headers and examples for the CH32V003 and many other WCH RISC-V chips, built with gcc-riscv64 on Windows, Linux or WSL. The CH32V003 is a 10 cent part with a RISC-V core at 48MHz, 16kB [...]

## Linux in a browser tab

DevFeed: [Linux in a browser tab](<https://devfeed.tech/articles/linux-in-a-browser-tab-141268.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/linux-in-a-browser-tab/>)

Author: Anne Barela

Published: 2026-11-18T22:26:15Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Linux Kernel](<https://devfeed.tech/topics/linux-kernel.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [Compilers and Linkers](<https://devfeed.tech/topics/compilers-and-linkers.md>), [browser](<https://devfeed.tech/topics/browser.md>), [Wasm components](<https://devfeed.tech/topics/wasm-components.md>)

Tags: [alpine](<https://devfeed.tech/tags/alpine.md>), [browser](<https://devfeed.tech/tags/browser.md>), [computers](<https://devfeed.tech/tags/computers.md>), [emulation](<https://devfeed.tech/tags/emulation.md>), [ext4](<https://devfeed.tech/tags/ext4.md>), [github](<https://devfeed.tech/tags/github.md>), [ip](<https://devfeed.tech/tags/ip.md>), [kernel](<https://devfeed.tech/tags/kernel.md>), [linux](<https://devfeed.tech/tags/linux.md>), [linux-7-x](<https://devfeed.tech/tags/linux-7-x.md>), [linux-kernel](<https://devfeed.tech/tags/linux-kernel.md>), [memory](<https://devfeed.tech/tags/memory.md>), [memory-management](<https://devfeed.tech/tags/memory-management.md>), [mmu](<https://devfeed.tech/tags/mmu.md>), [module](<https://devfeed.tech/tags/module.md>), [scheduler](<https://devfeed.tech/tags/scheduler.md>), [shell](<https://devfeed.tech/tags/shell.md>), [tcp](<https://devfeed.tech/tags/tcp.md>), [tcp-ip](<https://devfeed.tech/tags/tcp-ip.md>), [wasm](<https://devfeed.tech/tags/wasm.md>), [webassembly](<https://devfeed.tech/tags/webassembly.md>)

### AI overview

unkernel runs a real Linux 7.x kernel as a WebAssembly module, with a real MMU and native kernel handling for syscalls, scheduling, memory, ext4, and networking. It emulates only user programs using kwemu's riscv64 CPU; unmodified Alpine and Ubuntu binaries can run. JSPI lets the kernel suspend and resume task stacks, while a runtime JIT compiles hot user code to wasm. On a tight integer loop, the JIT reaches about 3,900 MIPS versus about 270 interpreted, though CPU-heavy work remains well behind native. Opening the page downloads about 10 MB and provides a shell, package manager, browser-persistent disk, internet through a Wisp proxy, sound, plus a JavaScript SDK and CLI.

### Source excerpt

PiThings has published unkernel on GitHub, a real Linux kernel compiled to WebAssembly that boots to a shell in under a second. It's Linux 7.x built as a single wasm module with a real MMU. The syscalls, scheduler, memory management, ext4 and TCP/IP are compiled code rather than emulation, so programs see Linux's own behavior. [...]

## U-blox brings WiFi 6E and edge AI to low-power IoT modules

DevFeed: [U-blox brings WiFi 6E and edge AI to low-power IoT modules](<https://devfeed.tech/articles/u-blox-brings-wifi-6e-and-edge-ai-to-low-power-iot-modules-141271.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/u-blox-brings-wifi-6e-and-edge-ai-to-low-power-iot-modules/>)

Author: Anne Barela

Published: 2026-11-18T22:22:45Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Internet of things](<https://devfeed.tech/topics/iot.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>), [zigbee](<https://devfeed.tech/topics/zigbee.md>), [tinyml](<https://devfeed.tech/topics/tinyml.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [components-parts](<https://devfeed.tech/tags/components-parts.md>), [edge](<https://devfeed.tech/tags/edge.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [internet-of-things](<https://devfeed.tech/tags/internet-of-things.md>), [iot](<https://devfeed.tech/tags/iot.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [modules](<https://devfeed.tech/tags/modules.md>), [nrf7120](<https://devfeed.tech/tags/nrf7120.md>), [u-blox](<https://devfeed.tech/tags/u-blox.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wifi-6e](<https://devfeed.tech/tags/wifi-6e.md>)

### AI overview

U-blox's ALMA-W1 modules combine WiFi 6, Bluetooth LE and, in wireless MCU versions, Thread and Zigbee for low-power IoT devices. WiFi 6E models add 6 GHz; u-blox reports 8 µA connected standby at 5 GHz using DTIM10, while receive current is 10.3-11.7 mA and transmit current reaches 241 mA at full output. Wireless MCU models include a 256 MHz Arm Cortex-M33, 256 MHz RISC-V coprocessor, 1 MB RAM and 63 GPIOs. Tri-band ALMA-W111 and ALMA-W116 modules add Nordic's Axon NPU for supported on-module AI workloads; u-blox claims up to 15x the speed of the main MCU. The smallest package measures 10.4 x 11.2 x 1.9 mm. Samples are going to select customers, and certifications are pending.

### Source excerpt

All About Circuits covered u-blox's new ALMA-W1 series, a family of small wireless modules built around Nordic Semiconductor's nRF7120 and nRF7120E chips. They support WiFi 6 on 2.4 GHz and 5 GHz, with WiFi 6E models adding the 6 GHz band, plus Bluetooth LE. The wireless MCU versions also handle Thread and Zigbee. They're aimed [...]

## Will agents make Kubernetes obsolete?

DevFeed: [Will agents make Kubernetes obsolete?](<https://devfeed.tech/articles/will-agents-make-kubernetes-obsolete-141247.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/will-agents-make-kubernetes-obsolete/>)

Author: Anne Barela

Published: 2026-11-18T22:19:21Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [agentic workflows](<https://devfeed.tech/topics/agentic-workflows.md>), [AIOps for Kubernetes](<https://devfeed.tech/topics/aiops-for-kubernetes.md>), [AI-assisted coding](<https://devfeed.tech/topics/ai-assisted-coding.md>)

Tags: [agent-substrate](<https://devfeed.tech/tags/agent-substrate.md>), [agents](<https://devfeed.tech/tags/agents.md>), [agents-in-production](<https://devfeed.tech/tags/agents-in-production.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-agents](<https://devfeed.tech/tags/ai-agents.md>), [ai-coding-tools](<https://devfeed.tech/tags/ai-coding-tools.md>), [ai-training-and-inference](<https://devfeed.tech/tags/ai-training-and-inference.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [case-study](<https://devfeed.tech/tags/case-study.md>), [cloud-native](<https://devfeed.tech/tags/cloud-native.md>), [computers](<https://devfeed.tech/tags/computers.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [infrastructure](<https://devfeed.tech/tags/infrastructure.md>), [kubernetes](<https://devfeed.tech/tags/kubernetes.md>), [openshell](<https://devfeed.tech/tags/openshell.md>)

### AI overview

The excerpt argues that AI agents may reduce the need to configure infrastructure directly, but do not make reliable infrastructure unnecessary. Cloud-native developers already use AI coding tools at higher rates than other developers (75% versus 55%), while a survey found that only 30% of leaders said agents completed more than 60% of assigned tasks without human intervention. At China Merchants Bank, Kubernetes-based scheduling, monitoring and scaling for nearly 10,000 accelerator cards raised average utilization from 35% to over 60% and cut inference cost per million tokens by more than 60%. The excerpt also names Google's Agent Substrate 1.0 and Nvidia's CNCF Sandbox contribution OpenShell as efforts to limit agent-generated code. These examples support continued infrastructure and control needs alongside agent adoption.

### Source excerpt

A piece at InfoWorld takes on the claim that AI agents are making Kubernetes and other infrastructure tools irrelevant. The argument it answers goes like this: nobody cares about the primitives anymore, because agents just build things. The article's response is that wanting to skip infrastructure configuration is different from wanting infrastructure that works. Some [...]

## Carnegie Mellon is putting computer science courses on YouTube for free

DevFeed: [Carnegie Mellon is putting computer science courses on YouTube for free](<https://devfeed.tech/articles/carnegie-mellon-is-putting-computer-science-courses-on-youtube-for-free-141105.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/carnegie-mellon-is-putting-computer-science-courses-on-youtube-for-free/>)

Author: Anne Barela

Published: 2026-11-18T19:38:41Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Computer science](<https://devfeed.tech/topics/computer-science.md>), [Machine learning](<https://devfeed.tech/topics/machine-learning.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [Robotics](<https://devfeed.tech/topics/robotics.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ai-tutoring](<https://devfeed.tech/tags/ai-tutoring.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [biology](<https://devfeed.tech/tags/biology.md>), [carnegie-mellon](<https://devfeed.tech/tags/carnegie-mellon.md>), [computer](<https://devfeed.tech/tags/computer.md>), [computer-science](<https://devfeed.tech/tags/computer-science.md>), [computers](<https://devfeed.tech/tags/computers.md>), [courses](<https://devfeed.tech/tags/courses.md>), [free](<https://devfeed.tech/tags/free.md>), [history](<https://devfeed.tech/tags/history.md>), [machine-learning](<https://devfeed.tech/tags/machine-learning.md>), [multimodal](<https://devfeed.tech/tags/multimodal.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [software](<https://devfeed.tech/tags/software.md>), [software-engineering](<https://devfeed.tech/tags/software-engineering.md>), [systems](<https://devfeed.tech/tags/systems.md>), [youtube](<https://devfeed.tech/tags/youtube.md>)

### AI overview

Carnegie Mellon is making full, campus-taught computer science lectures freely watchable on YouTube, with courses from seven departments spanning areas including AI, robotics, systems, software engineering and biology. The excerpt names courses such as 15-442 (machine learning systems), 11-777 (multimodal machine learning), 17-645 (machine learning in production) and introductory course 15-110. CMU says it also plans interactive lessons based on the courses, with instant feedback and a badge, plus AI tutoring in the courseware. Graded work and an official credential are available through CMU Online.

### Source excerpt

Carnegie Mellon University is posting full classroom lectures from its computer science faculty on YouTube, free to watch. The courses come from seven departments and cover AI, robotics, systems, software engineering and biology. The first batch premieres in November. The lineup is a list of real course numbers and the people who teach them. 15-442, [...]

## The latest edition of Phrack magazine is out

DevFeed: [The latest edition of Phrack magazine is out](<https://devfeed.tech/articles/the-latest-edition-of-phrack-magazine-is-out-141068.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/the-latest-edition-of-phrack-magazine-is-out/>)

Author: Anne Barela

Published: 2026-11-18T19:22:01Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Reverse Engineering](<https://devfeed.tech/topics/reverse-engineering.md>), [Machine learning](<https://devfeed.tech/topics/machine-learning.md>), [Memory Safety](<https://devfeed.tech/topics/memory-safety.md>)

Tags: [backdoors](<https://devfeed.tech/tags/backdoors.md>), [binary-ninja](<https://devfeed.tech/tags/binary-ninja.md>), [botnets](<https://devfeed.tech/tags/botnets.md>), [boxing](<https://devfeed.tech/tags/boxing.md>), [chromium](<https://devfeed.tech/tags/chromium.md>), [computers](<https://devfeed.tech/tags/computers.md>), [container](<https://devfeed.tech/tags/container.md>), [exploitation](<https://devfeed.tech/tags/exploitation.md>), [halvar-flake](<https://devfeed.tech/tags/halvar-flake.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [history](<https://devfeed.tech/tags/history.md>), [interview](<https://devfeed.tech/tags/interview.md>), [issue](<https://devfeed.tech/tags/issue.md>), [kernel](<https://devfeed.tech/tags/kernel.md>), [linux-kernel](<https://devfeed.tech/tags/linux-kernel.md>), [machine-learning](<https://devfeed.tech/tags/machine-learning.md>), [machine-learning-models](<https://devfeed.tech/tags/machine-learning-models.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [phrack](<https://devfeed.tech/tags/phrack.md>), [publications](<https://devfeed.tech/tags/publications.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>)

### AI overview

Phrack's third issue under its new staff contains 23 main papers and eight shorter Line Noise articles, making it larger than last year's 40th anniversary issue. Topics include exploitation, reverse engineering, machine learning, hardware, and hacking history. Technical papers cover vDSO container escapes, use-after-free exploitation, QNX shellcode, Linux kernel research, a Chromium Skia sandbox escape, Windows smart card architecture, Binary Ninja static taint analysis, underwater vehicles, and machine learning backdoors. Other pieces trace WinFSP zero-day bugs to PhrackCTF challenges and recount episodes from hacking history, including the SSH1 CRC32 vulnerability featured in The Matrix Reloaded. The issue also includes an interview with Halvar Flake. Editors invite readers to submit write-ups for the next issue.

### Source excerpt

Phrack has published a new issue, the third put together by the magazine's new staff. It's larger than last year's 40th anniversary release, with 23 main papers and eight shorter articles in Line Noise. The subjects run from exploitation and reverse engineering to machine learning, hardware, and the history and culture around this work. The [...]

## A language model for DOS that fits on a floppy disk

DevFeed: [A language model for DOS that fits on a floppy disk](<https://devfeed.tech/articles/a-language-model-for-dos-that-fits-on-a-floppy-disk-140901.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/a-language-model-for-dos-that-fits-on-a-floppy-disk/>)

Author: Anne Barela

Published: 2026-11-18T17:18:37Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Language models](<https://devfeed.tech/topics/language-models.md>), [Tensorflow](<https://devfeed.tech/topics/tensorflow.md>)

Tags: [486dx](<https://devfeed.tech/tags/486dx.md>), [c](<https://devfeed.tech/tags/c.md>), [code](<https://devfeed.tech/tags/code.md>), [dos](<https://devfeed.tech/tags/dos.md>), [fable-5](<https://devfeed.tech/tags/fable-5.md>), [fable-5-2](<https://devfeed.tech/tags/fable-5-2.md>), [floppy](<https://devfeed.tech/tags/floppy.md>), [floppy-disk](<https://devfeed.tech/tags/floppy-disk.md>), [github](<https://devfeed.tech/tags/github.md>), [language](<https://devfeed.tech/tags/language.md>), [language-model](<https://devfeed.tech/tags/language-model.md>), [large-language-models](<https://devfeed.tech/tags/large-language-models.md>), [model](<https://devfeed.tech/tags/model.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [opus](<https://devfeed.tech/tags/opus.md>), [opus-5](<https://devfeed.tech/tags/opus-5.md>), [opus-5-5](<https://devfeed.tech/tags/opus-5-5.md>), [pentium](<https://devfeed.tech/tags/pentium.md>), [programming](<https://devfeed.tech/tags/programming.md>), [published](<https://devfeed.tech/tags/published.md>), [question](<https://devfeed.tech/tags/question.md>), [repository](<https://devfeed.tech/tags/repository.md>), [small](<https://devfeed.tech/tags/small.md>), [tiny](<https://devfeed.tech/tags/tiny.md>), [turbo-c](<https://devfeed.tech/tags/turbo-c.md>), [vintage-computing](<https://devfeed.tech/tags/vintage-computing.md>)

### AI overview

Tiny-2.1 is a question-answering transformer for plain DOS on a Pentium or 486DX, written in Turbo C 2.0 and small enough, with its files, to fit on a floppy disk. To run it, copy the DOS folder files to the machine and keep TINY.EXE and TINY.BIN together; the folder's README lists keys and options. Rebuilding uses one Turbo C command line. The training kit includes facts, gen2.py for producing question-and-answer pairs in varied wording, and train2.py, which uses Python 3, NumPy and PyTorch; a normal CPU is sufficient. The training notes describe how to add facts, and exporting unchanged produces the released TINY.BIN. The code is MIT licensed, while three files derived from public datasets retain ODbL and CC BY-SA licenses.

### Source excerpt

WollyMonjac has published Tiny-2.1 on GitHub, a small question-answering transformer written in Turbo C 2.0 that runs on a Pentium or 486DX under plain DOS. The whole thing fits on a floppy disk. The repository says the code was written by Fable 5.2 and the model trained by Opus 5.5. Running it means copying the [...]

## Mural is a low cost wall plotter

DevFeed: [Mural is a low cost wall plotter](<https://devfeed.tech/articles/mural-is-a-low-cost-wall-plotter-140903.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/mural-is-a-low-cost-wall-plotter/>)

Author: Anne Barela

Published: 2026-11-18T17:15:04Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [SVG](<https://devfeed.tech/topics/svg.md>), [web graphics](<https://devfeed.tech/topics/web-graphics.md>)

Tags: [area](<https://devfeed.tech/tags/area.md>), [code](<https://devfeed.tech/tags/code.md>), [commands](<https://devfeed.tech/tags/commands.md>), [computers](<https://devfeed.tech/tags/computers.md>), [cost](<https://devfeed.tech/tags/cost.md>), [documentation](<https://devfeed.tech/tags/documentation.md>), [drawing](<https://devfeed.tech/tags/drawing.md>), [file](<https://devfeed.tech/tags/file.md>), [github](<https://devfeed.tech/tags/github.md>), [image](<https://devfeed.tech/tags/image.md>), [interface](<https://devfeed.tech/tags/interface.md>), [large](<https://devfeed.tech/tags/large.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [mural](<https://devfeed.tech/tags/mural.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [pen](<https://devfeed.tech/tags/pen.md>), [plotter](<https://devfeed.tech/tags/plotter.md>), [projects](<https://devfeed.tech/tags/projects.md>), [published](<https://devfeed.tech/tags/published.md>), [set](<https://devfeed.tech/tags/set.md>), [size](<https://devfeed.tech/tags/size.md>), [surface](<https://devfeed.tech/tags/surface.md>), [svg](<https://devfeed.tech/tags/svg.md>), [wall-plotter](<https://devfeed.tech/tags/wall-plotter.md>)

### AI overview

Mural is a low cost wall plotter that hangs from two wall pins and uses a pen to draw large SVG images. Set the pin spacing in its web interface to define the drawing area. For a 1 m span, the top margin is 250 mm and the 20% side margins leave 600 mm of width. The SVG is scaled to that width, with height kept proportional and each SVG unit treated as a millimeter. A processing step converts the image into coordinate moves and pen up/down commands, which are uploaded to the microcontroller and run line by line. Code and documentation are published on GitHub.

### Source excerpt

Mural is a low cost wall plotter from Nik Ivanov, with the code and documentation published on GitHub. It hangs from two pins on a wall and drags a pen across the surface to draw an SVG image at large size. The drawing area comes from the distance between the two pins, which is set [...]

## Flipper One - a portable Arm Linux computer and networking multi-tool

DevFeed: [Flipper One - a portable Arm Linux computer and networking multi-tool](<https://devfeed.tech/articles/flipper-one-a-portable-arm-linux-computer-and-networking-multi-tool-140779.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/flipper-one-a-portable-arm-linux-computer-and-networking-multi-tool/>)

Author: Anne Barela

Published: 2026-11-18T16:01:05Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Linux](<https://devfeed.tech/topics/linux.md>), [Raspberry Pi RP2350](<https://devfeed.tech/topics/raspberry-pi-rp2350.md>), [Arm](<https://devfeed.tech/topics/arm.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>)

Tags: [arm](<https://devfeed.tech/tags/arm.md>), [chip](<https://devfeed.tech/tags/chip.md>), [computer](<https://devfeed.tech/tags/computer.md>), [computers](<https://devfeed.tech/tags/computers.md>), [cortex](<https://devfeed.tech/tags/cortex.md>), [devices](<https://devfeed.tech/tags/devices.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [flipper](<https://devfeed.tech/tags/flipper.md>), [flipper-devices](<https://devfeed.tech/tags/flipper-devices.md>), [flipper-one](<https://devfeed.tech/tags/flipper-one.md>), [gigabit-ethernet](<https://devfeed.tech/tags/gigabit-ethernet.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hdmi](<https://devfeed.tech/tags/hdmi.md>), [linux](<https://devfeed.tech/tags/linux.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [networking](<https://devfeed.tech/tags/networking.md>), [open-source-hardware](<https://devfeed.tech/tags/open-source-hardware.md>), [portable](<https://devfeed.tech/tags/portable.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [raspberry-pi-rp2350](<https://devfeed.tech/tags/raspberry-pi-rp2350.md>), [rk3576](<https://devfeed.tech/tags/rk3576.md>), [tool](<https://devfeed.tech/tags/tool.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

Flipper One is an open-source portable Arm Linux computer and networking multi-tool built around a Rockchip RK3576, with an RP2350 microcontroller for low-level control. It adds dual Gigabit Ethernet, WiFi 6E, HDMI 2.1, USB-C, a nano SIM slot, GPIO, and an M.2 slot for an optional cellular modem. Unlike the STM32-based Flipper Zero, Flipper Devices says it operates at different levels of networking and wireless stacks. The Debian-based Flipper OS uses a mainline Linux kernel, with RK3576 support developed with Collabora; wireless and cellular may still require binary blobs for regulatory reasons. Kickstarter rewards start at $399, with shipping planned for July 2027.

### Source excerpt

Jean-Luc Aufranc wrote at CNX Software about the Flipper One, an open-source hardware portable Arm Linux computer and networking multi-tool from Flipper Devices. It runs on a Rockchip RK3576 octa-core Cortex-A72/A53 chip, with a Raspberry Pi RP2350 microcontroller handling low-level control. Ports and radios include dual Gigabit Ethernet, WiFi 6E, HDMI 2.1, USB-C OTG and [...]

## Home automation with the ESP32: managing loads through a web server

DevFeed: [Home automation with the ESP32: managing loads through a web server](<https://devfeed.tech/articles/home-automation-with-the-esp32-managing-loads-through-a-web-server-140780.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/home-automation-with-the-esp32-managing-loads-through-a-web-server/>)

Author: Anne Barela

Published: 2026-11-18T15:56:42Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [Web](<https://devfeed.tech/topics/web.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [Web app](<https://devfeed.tech/topics/webapp.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [array](<https://devfeed.tech/tags/array.md>), [automation](<https://devfeed.tech/tags/automation.md>), [board](<https://devfeed.tech/tags/board.md>), [coil](<https://devfeed.tech/tags/coil.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [home](<https://devfeed.tech/tags/home.md>), [home-automation](<https://devfeed.tech/tags/home-automation.md>), [input](<https://devfeed.tech/tags/input.md>), [internet-of-things](<https://devfeed.tech/tags/internet-of-things.md>), [nodemcu](<https://devfeed.tech/tags/nodemcu.md>), [pc](<https://devfeed.tech/tags/pc.md>), [phone](<https://devfeed.tech/tags/phone.md>), [projects](<https://devfeed.tech/tags/projects.md>), [relay](<https://devfeed.tech/tags/relay.md>), [server](<https://devfeed.tech/tags/server.md>), [switches](<https://devfeed.tech/tags/switches.md>), [tablet](<https://devfeed.tech/tags/tablet.md>), [ttl](<https://devfeed.tech/tags/ttl.md>), [web](<https://devfeed.tech/tags/web.md>), [web-server](<https://devfeed.tech/tags/web-server.md>)

### AI overview

The project uses an ESP32 NodeMCU and five relays to switch loads from a phone, tablet, or PC through a Wi-Fi web page. Relay inputs connect to GPIO 2, 26, 27, 25, and 33. A sketch using ESPAsyncWebServer and AsyncTCP serves the page on port 80; each slider sends a GET request with a relay number and state, and the firmware writes the corresponding pin. Defines configure the relay count and normally open or normally closed behavior, while an array stores pin assignments. After reset, the board prints its IP address to the serial monitor at 115200 baud; opening that address loads the controls. The write-up recommends an external 5 V supply instead of PC USB power. The excerpt identifies relay terminals for loads up to 250 VAC but provides no further mains-safety guidance.

### Source excerpt

Open Electronics has posted a project that switches mains loads from a phone, tablet or PC using an ESP32 NodeMCU board and a bank of relays. Five relay inputs are wired to GPIO 2, 26, 27, 25 and 33. The relay boards are the common TTL-level Arduino type, where a high input saturates a transistor, [...]

## A smart product counter with Arduino & Python

DevFeed: [A smart product counter with Arduino & Python](<https://devfeed.tech/articles/a-smart-product-counter-with-arduino-python-140782.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/smart-product-counter-with-arduino-python/>)

Author: Anne Barela

Published: 2026-11-18T15:52:50Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Arduino](<https://devfeed.tech/topics/arduino.md>), [IPython](<https://devfeed.tech/topics/ipython.md>)

Tags: [app](<https://devfeed.tech/tags/app.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [arduino-nano](<https://devfeed.tech/tags/arduino-nano.md>), [breadboard](<https://devfeed.tech/tags/breadboard.md>), [computer](<https://devfeed.tech/tags/computer.md>), [controls](<https://devfeed.tech/tags/controls.md>), [count](<https://devfeed.tech/tags/count.md>), [counter](<https://devfeed.tech/tags/counter.md>), [csv](<https://devfeed.tech/tags/csv.md>), [desktop](<https://devfeed.tech/tags/desktop.md>), [desktop-app](<https://devfeed.tech/tags/desktop-app.md>), [detection](<https://devfeed.tech/tags/detection.md>), [hackster](<https://devfeed.tech/tags/hackster.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [ir](<https://devfeed.tech/tags/ir.md>), [ir-sensor](<https://devfeed.tech/tags/ir-sensor.md>), [products](<https://devfeed.tech/tags/products.md>), [programming](<https://devfeed.tech/tags/programming.md>), [projects](<https://devfeed.tech/tags/projects.md>), [python](<https://devfeed.tech/tags/python.md>), [real-time](<https://devfeed.tech/tags/real-time.md>), [sensor](<https://devfeed.tech/tags/sensor.md>), [serial](<https://devfeed.tech/tags/serial.md>), [system](<https://devfeed.tech/tags/system.md>)

### AI overview

An Arduino Nano counts products detected by an IR obstacle sensor and sends each detection and the running total to a Python desktop app over USB serial at 9600 baud. A brief buzzer sound confirms each detection. The app displays the total, connection status, and detection log, with START, STOP, and RESET controls and an option to save the log as a CSV report. The described setup is intended for small production lines, workshops, or inventory monitoring.

### Source excerpt

saya built a product counting system with an Arduino Nano and a Python desktop app, and wrote it up on Hackster.io. An IR obstacle sensor watches for products passing in front of it, and the count updates in real time. The hardware is an Arduino Nano, an IR obstacle detection sensor, a buzzer, a breadboard [...]

## The Intel 4004 55th anniversary

DevFeed: [The Intel 4004 55th anniversary](<https://devfeed.tech/articles/the-intel-4004-55th-anniversary-140783.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/the-intel-4004-55th-anniversary/>)

Author: Anne Barela

Published: 2026-11-18T15:40:03Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Electrical engineering and computer science (EECS)](<https://devfeed.tech/topics/electrical-engineering-and-computer-science-eecs.md>), [intel](<https://devfeed.tech/topics/intel.md>), [Computer science](<https://devfeed.tech/topics/computer-science.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [4004](<https://devfeed.tech/tags/4004.md>), [anniversary](<https://devfeed.tech/tags/anniversary.md>), [birthday](<https://devfeed.tech/tags/birthday.md>), [busicom](<https://devfeed.tech/tags/busicom.md>), [chip](<https://devfeed.tech/tags/chip.md>), [computer](<https://devfeed.tech/tags/computer.md>), [computer-science](<https://devfeed.tech/tags/computer-science.md>), [computers](<https://devfeed.tech/tags/computers.md>), [digital](<https://devfeed.tech/tags/digital.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [family](<https://devfeed.tech/tags/family.md>), [first](<https://devfeed.tech/tags/first.md>), [history](<https://devfeed.tech/tags/history.md>), [intel](<https://devfeed.tech/tags/intel.md>), [intel-4004](<https://devfeed.tech/tags/intel-4004.md>), [international](<https://devfeed.tech/tags/international.md>), [microprocessor](<https://devfeed.tech/tags/microprocessor.md>), [museum](<https://devfeed.tech/tags/museum.md>), [project](<https://devfeed.tech/tags/project.md>), [science](<https://devfeed.tech/tags/science.md>), [site](<https://devfeed.tech/tags/site.md>), [students](<https://devfeed.tech/tags/students.md>), [vintage-computing](<https://devfeed.tech/tags/vintage-computing.md>)

### AI overview

The 4004.com project documents the Intel 4004 and its family; a November 2025 update reports that Klaus Scheffler and Lajos Kintli completed a discrete-transistor MCS-4 4-bit computer. Its seven-chip design includes a 4004 CPU, 4001 ROM, three 4003 shift registers and two 4002 RAMs, plus an interactive Busicom 141-PF calculator panel replica. It implements the calculator logic in hardware and 4004 assembly, and runs at up to 1.5 MHz--twice the original 740 kHz clock, or 187,500 instructions per second after division by eight. Scheffler attributes the speed to low-capacitance, four-terminal RF FETs, contrasting them with modern discrete FETs typically built for power switching and having higher gate capacitance. This overview reflects the supplied excerpt.

### Source excerpt

The Intel 4004, the first microprocessor, shipped in 1971, which makes 2026 its 55th birthday. The site 4004.com is an international project that documents the chip and its family, with the goal of making computer science and digital electronics accessible to historians, students, hobbyists and museum visitors. A November 2025 update covers work by Klaus [...]

## Build a walkie-talkies with two ESP32 boards and ESP-NOW

DevFeed: [Build a walkie-talkies with two ESP32 boards and ESP-NOW](<https://devfeed.tech/articles/build-a-walkie-talkies-with-two-esp32-boards-and-esp-now-140777.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/build-a-walkie-talkies-with-two-esp32-boards-and-esp-now/>)

Author: Anne Barela

Published: 2026-11-18T15:35:54Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>)

Tags: [amoled](<https://devfeed.tech/tags/amoled.md>), [audio](<https://devfeed.tech/tags/audio.md>), [displays](<https://devfeed.tech/tags/displays.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [projects](<https://devfeed.tech/tags/projects.md>), [voice](<https://devfeed.tech/tags/voice.md>), [walkie-talkie](<https://devfeed.tech/tags/walkie-talkie.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

The project turns two ESP32 boards into push-to-talk walkie-talkies, sending voice directly over Espressif's low-power ESP-NOW protocol without a WiFi router. It uses Waveshare C6 Touch AMOLED 2.16 boards with microphones, speakers and external antenna connectors; the code was adapted from a gallery project by changing its board template. The touch interface displays signal strength, link status and battery information, and offers controls for volume, microphone sensitivity and screen brightness, as well as a way to forget a paired device. Other boards may work if they have a similarly sized screen, microphone and speaker. Only one person speaks at a time, using the screen or the board's boot button.

### Source excerpt

Julian Horsey writes at Geeky Gadgets about a project from Volos Projects that turns two ESP32 boards into walkie-talkies, sending voice audio over ESP-NOW. ESP-NOW is Espressif's low-power protocol that lets two boards talk directly without a WiFi router in between. The build uses Waveshare C6 Touch AMOLED 2.16 boards, which have a microphone, a [...]

[Next page](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md?cursor=WyIyMDI2LTExLTE4VDE1OjM1OjU0KzAwOjAwIiwgIjdlMDk1NmE3LTQ5MTYtNGY0NC1iMTBmLWY4N2RiZWZlMTY4ZSJd>)