# Community blog on PINE64 Recent content in Community blog on PINE64 This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles. ## Full PinePhone 3D File Released DevFeed: [Full PinePhone 3D File Released]() Original publisher: [Read original article]() Published: 2026-07-25T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pinephone](), [3D](), [Pinephone-Pro](), [Mobile](), [Linux]() Tags: [3d](), [3d-printed](), [linux](), [mobile](), [pinephone](), [pinephone-pro]() ### AI overview PineStore released a complete 3D model of the PinePhone and PinePhone Pro, including buttons and internal and external frames. The release may support self-repair and custom 3D-printed parts. The article also says a successor is not currently planned, though that decision could change. ### Source excerpt Table of contents Full PinePhone 3D Files Released PinePhone2? JFs 3D Printed Back Cover Do you have something to share? Contact Community PineStore Full PinePhone 3D Files Released This week PineStore has released the full 3D file for the PinePhone/PinePhone Pro. This is different than the file only containing the back cover, which does not include the buttons or the internal and external frame. This opens up the possibility of self repairing some PinePhone components using 3D printers along with creating custom parts. This may be considered as a final hurrah for this generation of the PinePhone from PineStore. Though this does not however mark the end of the devices themselves. They are still going, still supported by many mobile Linux projects and still one of the most open mobile Linux hardware platforms you can find. Let's keep them going for many years to come! The 3D file can be found on the PineStore server and the "PinePhone board information, schematics and certifications" section of the wiki. https://files.pine64.org/doc/PinePhone/PinePhone_and_Pro_case_asm.stp (direct link) https://wiki.pine64.org/wiki/PinePhone PinePhone2? This has been said previously in another blog post but many continue to inquire about a successor to the first PinePhone line. It is not off the cards, but the straight answer is not right now. The founder of PineStore has discussed how the PinePhone was always meant as a development platform to help bring the at the time stagnant mobile Linux space up. He thinks that they have done their job as the focus has moved on to porting Linux to Android phones that are much cheaper and have more performance. It would be a big financial risk, where PineStore would lose a lot of money developing the device and with the current market there, is no SOC that currently fits the solution. But coming back to the beginning, this does not mean "no". But when the time is right, this decision may change. JFs 3D Printed Back Cover Community member JF has ## Quick update: May 2026 DevFeed: [Quick update: May 2026]() Original publisher: [Read original article]() Author: LoRa Left-handed operational Radio authority; Obviously Published: 2026-05-18T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Home Assistant](), [lora](), [Matter](), [Pinephone](), [zigbee](), [Kernel](), [Pinephone-Pro](), [USB](), [Crystal](), [Dongle]() Tags: [2026](), [community](), [crystal](), [dongle](), [eol](), [home-assistant](), [kernel](), [lcd](), [pinedio](), [pinephone](), [pinephone-pro](), [pinetime](), [pinevoice](), [protocol](), [table](), [update](), [usb](), [zigbee]() ### AI overview Pine64's May 2026 update covers the PineVoice Home Assistant speaker, PineTime and PineTime Pro hardware, PineDio USB LoRa development, and recent PineTab2, PinePhone, PinePhone Pro, and PineTab-V software updates. It also reports instability in the PineDio adapter caused by an overheating crystal oscillator. ### Source excerpt Table of contents Whats been going on recently? PineVoice PineTime/PineTime Pro LoRa? (Left-handed operational Radio authority, obviously) Important recent community updates: Do you have something to share? Contact Community PineStore Whats been going on recently? Hello everyone, we wanted to do a quick update on what's been happening recently. Life has been pretty busy but there's lots of nice things happening in the background that we'd like to share. PineVoice The PineVoice Home Assistant speaker (formally PineVox) is in its final stages. Production begins. Further on this, there will be limited bundle with this device which will include a PineVoice, Zigbee dongle, power supply and two matter modules. Pair it with a SBC of choice and run your Home Assistant instance locally! PineTime/PineTime Pro The current PineTime LCD is EOL and a new one is replacing it, though it is essentially the same display. These will be shipping in the next PineTime batch. New PineTime Pro samples have been received by developers. Shiny! LoRa? (Left-handed operational Radio authority, obviously) The PineDio USB LoRa Adapter is at the focus of a new effort to begin progress on potential new LoRa devices. MeshCore is the current protocol target for the USB LoRa Adapter along with help from the pyMC_core library project. The current problem with the device is that the crystal oscillator is heating up too much and can cause clock frequency drifting instability. In a nutshell that means your messages come out garbled. This may eventually be fixed with a TXCO (Temperature-Compensated Crystal Oscillator) to maintain a stable clock frequency. Important recent community updates: DanctNIX PineTab2 updates (including factory image) Adam Piggz: PinePhone, PinePhone Pro, PineTab2 all updated to kernel 7.0, and improved USB config. Zypper ref and dup to update. machaddr@mastodon.sdf.org: with their new Gentoo PineTab-V image Do you have something to share? Do you have news to share with the communit ## PinePower V2 USB-C ports may report 0V despite outputting the correct voltage DevFeed: [PinePower V2 USB-C ports may report 0V despite outputting the correct voltage]() Original publisher: [Read original article]() Published: 2026-05-12T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [USB](), [Microcontroller]() Tags: [issue](), [mcu](), [pinepower](), [power](), [product](), [usb]() ### AI overview Pine64 disclosed that some current Desktop PinePower V2 units may show 0V on their USB-C ports even though they output the correct voltage. The issue cannot be fixed by users because the MCU must be flashed at the factory; corrected batches are planned, but their production timing is unknown. ### Source excerpt Hey everyone, we'd like to make a public disclosure to the community about a product currently selling on the PineStore website (pine64.com). The current Desktop PinePower V2 batch has an issue where in some situations the USB-C ports will report "0V" when there is obviously something attached. In reality it is actually outputting the correct voltage. This has been fixed for future batches, but the current batch still has stock available. There is no fix available for affected Desktop PinePower V2 batches as the MCU can only be flashed at the factory. We have no ETA when the fixed batch will start production as this depends on the rest of the buggered batch being sold. We'll let you all know when the fixed ones hit the store. And please don't open your PinePower devices as they're high voltage power supplies, which can lead to serious risks. ## Introduction to the PineTime Pro DevFeed: [Introduction to the PineTime Pro]() Original publisher: [Read original article]() Published: 2026-03-28T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Hardware](), [Microcontroller](), [SOC](), [Bluetooth](), [Embedded Software Dev](), [Development]() Tags: [bluetooth](), [embedded](), [firmware](), [fosdem](), [hardware](), [mcu](), [pinetime](), [pinetime-pro](), [psram](), [soc]() ### AI overview Pine64 introduces the PineTime Pro, a more powerful sibling to the original PineTime rather than a replacement. The prototype features a dual-core Cortex-M33 SoC, Bluetooth 5.2, expanded memory, an AMOLED touchscreen, GPS, health sensors, and other upgraded hardware. ### Source excerpt Table of contents Introducing the PineTime Pro Why "Pro" and not "PineTime 2" What makes it "Pro" A long road to get here Recent progress What about software? What happens next? Do you have something to share? Contact Community PineStore Introducing the PineTime Pro The PineTime Pro was officially announced at FOSDEM26 on the Pine64 stand. The demo was a bit modest (more on that later on), but we were delighted to showcase the first prototype of the "next generation PineTime" along with a demo running on a development board! We also mentioned the PineTime Pro in the FOSDEM 2026 Update blog post. In this blog post, we would like to provide a more in-depth look at the PineTime Pro. Why "Pro" and not "PineTime 2" The PineTime project started in October 2019, that's more than 6 years ago! Needless to say, the PineTime has been a great success. The community has been very active in developing firmware for the device, companion apps, tools and more. And, according to PineStore, it sells very well. The reason the PineTime Pro isn't called the PineTime 2 is because it's not meant to replace the original PineTime. The original watch still has a lot going for it: it is simple, hackable, efficient and already supported by great community projects like InfiniTime and WaspOS. It will continue production alongside this new model. The PineTime Pro should be seen as a more powerful, more feature-rich sibling rather than a direct successor. If the original PineTime is a solid open smartwatch platform, the PineTime Pro is our attempt to push that idea much further with new and improved components. What makes it "Pro" Compared to the "OG" PineTime, the PineTime Pro brings a significant hardware upgrade. At its core is a dual-core Cortex-M33 SoC, with one application core running at up to 200 MHz and a dedicated Bluetooth core. It also comes with 800 KB of internal SRAM and 8 MB of PSRAM. Around that MCU, the hardware currently includes: Bluetooth 5.2 - Classic (BR/EDR) & Low Energy A ## FOSDEM 2026 Update DevFeed: [FOSDEM 2026 Update]() Original publisher: [Read original article]() Published: 2026-03-24T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [FOSDEM](), [Pinenote](), [Pinephone](), [Hardware](), [Documentation](), [Git](), [MediaWiki]() Tags: [community-update](), [demo](), [devices](), [documentation](), [fosdem](), [git](), [mediawiki](), [pinenote](), [pinetab2](), [pinetimepro](), [update]() ### AI overview A PINE64 community update covering the group's FOSDEM 2026 meetup, including PineNote demonstrations, PineTab 2 camera and video-decoding work, progress on PineVoice and PineTime Pro, planned Codeberg and documentation changes, and the effects of the DRAM shortage on device production. ### Source excerpt Table of contents Housekeeping What happened at FOSDEM 2026 Demos PineNote PineTab 2 DRAM shortage impact PineTime Pro Future of community editions Why can't community editions exist for already released devices? Challenges Where is the PinePhone 2? To conclude Do you have something to share? Contact Community PineStore Housekeeping Hey everyone! So long no talk. It's been a long time since a proper community update, but rest assured a "full size update" update is coming sometime in April (Charlie the Pinecorn returns!). We are still planning to migrate to Codeberg for primary git hosting and committing to the move from mediawiki to our documentation site created by community member Funeral. We hope to make this happen sometime this year. And a message to the team over at Genode, yes I did read your book :) - Caffeine What happened at FOSDEM 2026 FOSDEM 2026 was a very productive meetup for members of the PINE64 Community, aside from the occasional shenanigans. We had the opportunity to work on the PineVoice (formally PineVox) and PineTime Pro in person which helped push forward bring-up. There were additional discussions on potential new products and the effect of the DRAM chip shortage. Demos PineNote The PineNote was shown off at FOSDEM with a few demos featuring hrdl's Arch image and a pre-release image of QuillOS using hrdl's kernel tree. With a massive thanks to Tom.K, Phantomas and hrdl for staying around and helping demo with his PineNote. Some demos included smoothly playing videos, playing doom (you had to be there to believe it!) along with its capabilities as an actual ebook reader. PineTab 2 Danct12 put together an image for FOSDEM with camera and support for h264 video decoding. The demo also included a copy of big buck bunny and a razor1911 demo. DRAM shortage impact Currently the DRAM shortage will impact the production of devices like the Pinetab2, PineNote and PinePhone. PineStore founder TL Lim has stated that he doesn't wish to increase the price ## Project Showcase: Movuan DevFeed: [Project Showcase: Movuan]() Original publisher: [Read original article]() Published: 2025-08-27T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Mobile](), [Debian](), [systemd](), [GitLab](), [Testing]() Tags: [android](), [chromium](), [debian](), [gitlab](), [project-showcase](), [systemd](), [testing](), [tls]() ### AI overview A community project called Movuan provides a mobile distribution based on Devuan 5.0 with Phosh, using modified Mobian debos to build images. The article explains installation options, privacy-oriented extras, Devuan's alternative init systems, and Movuan's goal of becoming an official Devuan version. ### Source excerpt Table of contents The Movuan project Installing Movuan What is Devuan? Future goals and contributing Do you have something to share? Contact Community PineStore The Movuan project The Movuan project was started by community member lxb and announced in a forum post as an alternative to mobile distributions using the systemd init system. Thanks to being forked from Mobian, the project makes use of modified Mobian debos to build it's images. One of the modifications that lxb makes is an optional script which can customize a Movuan image to install extra software like AndroidImpEx for importing contacts and sms messages from an Android phone, Ungoogled Chromium, local caching DNS (bind) tunnelled through TLS (stubby) to privacy minded servers and an inbuilt adblocker through a caching proxy (squid). These modifications are a personal preference of lxb's but anyone is free to use them to help improve their privacy. Installing Movuan Movuan offers an image based on Devuan 5.0 (Debian 12) with Phosh. Users can find Movuan images in the GitLab repository along with instructions on installing said image. As usual you can use a tool like Balena Etcher or Gnome Disks to write them to an SD Card as well. You may build your own images as well using the debos recipe in the GitLab repository. What is Devuan? Devuan for users who are unaware is a fork of Debian which provides alterative init systems to Systemd such as: sysvinit (default) openrc runit sinit s6 shepherd The benefit of using a different init system depends on the features it offers over another. So it is highly depends on user preference. Other than this change it runs the same (at a surface level) as Debian/Mobian. Users can learn more about the Devuan project here. Future goals and contributing The goal of the Movuan project is to merge into Devuan as an official version, but it still requires some polishing to do before this can happen. Specifically help with packaging and testing would be appreciated! Anyone who i ## August Update: Note-able Tablet Updates DevFeed: [August Update: Note-able Tablet Updates]() Original publisher: [Read original article]() Published: 2025-08-16T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pinephone-Pro](), [Arch Linux](), [Linux](), [Kernel](), [Nix](), [GPU](), [Hardware]() Tags: [community-update](), [gpu](), [hardware](), [kernel](), [linux](), [pinenote](), [pinephone-pro](), [pinetab2](), [software](), [update]() ### AI overview Pine64's August 2025 community update announces a new community manager and covers the discontinuation of the PinePhone Pro, planned refurbished sales and spare-parts availability. It also reports updates involving the PineNote, PineTab2, operating systems, GPU software, PinePhone Pro patches, FreeBSD, and Pinecil. ### Source excerpt Table of contents Housekeeping PinePhone Pro discontinuation New community manager About me My goals as community manager PineNote Current status Operating Systems Arch PostmarketOS Nix WiFi Compatibility The issue Workaround #1 Workaround #2 Some words of warning with this workaround PineTab2 Kernel OS (DanctNIX's Arch Linux ARM port) Mesa (GPU) PinePhone Pro Mainlining project FreeBSD port Contributors welcome! Blisp Want to contribute to the next community update? Housekeeping Welcome back to another community update! In this update we announce a new community manager, updates to the PineTab2 and PineNote, FreeBSD on the PinePhone Pro, a guide on upstreaming PinePhone Pro patches and a small bit for you Pinecil users. PinePhone Pro discontinuation Recently PineStore has also discontinued the PinePhone Pro which was talked about in the last recent blog post. TLDR, sales were low which lead to the discontinuation of the device. Spare parts will be available for purchase for up to two years depending on if they sell well. If you still want a PinePhone Pro, refurbished ones will be put up for sale on the PineStore around the end of the month, similar to how it worked for the PineBook Pro. For more details, people can find it at the link below. https://pine64.org/2025/08/14/august_2025_short_update/ New community manager Authors: Caffeine Today I would like to formally announce that I have stepped up to take the roll as the community manager. This decision was made a few months ago as life has become a lot busier for Gamiee. We would like to thank him for the work he has done maintaining our community cluster and the countless hours spent on helping the community. Gamiee will continue maintaining the cluster for the foreseeable future. About me Hello everyone, my name is Camden, but you may also know me by my online alias CarbonatedCaffeine. I am a computing student from New Zealand (that country next to Australia) and I have been an active part of the Pine64 communit ## A Quick Community Update on PinePhone Pro and What's Next DevFeed: [A Quick Community Update on PinePhone Pro and What's Next]() Original publisher: [Read original article]() Published: 2025-08-14T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pinephone-Pro](), [Pinephone](), [RISC-V](), [Artificial Intelligence]() Tags: [ai](), [community-update](), [pinephone-pro](), [risc-v](), [update]() ### AI overview Pine64 announces that the PinePhone Pro is discontinued because sales were insufficient to sustain production. Spare parts may remain available for up to two years depending on demand, while the original PinePhone is expected to continue for about two more years. A small batch of refurbished PinePhone Pros is also planned. ### Source excerpt Hey everyone! As many have noticed, the PinePhone Pro is currently out ot stock on the Pine Store. Unfortunately we have to deliver you the following news: the PinePhone Pro is officially discontinued. We were told it didn't sell well enough to keep production going. But the good news for current owners are that spare parts will still be made for up to two years, depending on demand. Meanwhile, the trusty PinePhone (A64) is still alive and kicking, and Pine Store plans to keep it rolling for about two more years. No new PinePhone (Yet), future with RISC-V Right now, we've got no insider info on a brand-new PinePhone, so don't expect any surprise announcements soon. Pine Store is steering its energy toward other projects (including RISC-V and a little bit of AI), which you've probably noticed with the Oz64, STAR64, StarPro64, and Alpha One launches. And one last thing: later this month there'll be a small batch of refurbished PinePhone Pros up for grabs -- your final shot at owning one of these little powerhouses. ## PINE64 April 2025 Community Update: PineTab-V availability and device updates DevFeed: [PINE64 April 2025 Community Update: PineTab-V availability and device updates]() Original publisher: [Read original article]() Published: 2025-04-13T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Pinetab2](), [Debian](), [FOSDEM](), [GPU](), [Hardware](), [Pinenote](), [Android]() Tags: [android](), [cameras](), [debian](), [deepseek](), [firefox](), [firmware](), [fosdem](), [gpu](), [hardware](), [llm](), [npu](), [pinecil](), [pinenote](), [pinetab-v](), [pinetab2](), [pinetime](), [soc](), [update](), [wifi]() ### AI overview PINE64's April 2025 community update covers improvements to the PineTab2, PineTime, and PineNote; the PineTab-V's return to the store with a Debian and GNOME factory image; and the upcoming StarPro64 SBC, which includes an Eswin EIC7700 SoC, 32GB of LPDDR5 memory, and a 20 TOPS NPU. ### Source excerpt Hello and happy April! The past few months have been relatively quiet on the surface, but there is a lot going on behind the scenes. During the past three months we have seen some improvements for the PineTab2, PineTime and PineNote, along with the announcement that the PineTab-V is back in store and the new micro soldering tip set for the Pinecil. Charlie the Pinecorn also makes his yearly appearance in the update banner, artwork made by Caffeine. We have been very happy with the feedback after the launch of the PineNote Community Edition. Users coming from the developer edition with Android have been able to successfully move to the new Debian firmware without any major issues (thanks Maximilian, Diederik and hrdl!). We'd also like to apologize as we had most of this written up around late February early March and things got busy. Thanks for waiting patiently! We're making sure to focus on getting the word out than increasing the word count from now on. Table of contents FOSDEM 2025 PineTab-V StarPro64 PineTab2 PineNote Kernel improvements Demos PineTime Pinecil Community content PineNote Want to contribute to the next community update? FOSDEM 2025 Author: Caffeine Thank you to everyone who came past the pop-up meet-up at FOSDEM, it was fantastic to see everyone and be able to say hello. As mentioned in the previous update we weren't allocated a table this year, but we managed to meet with community members at Bar Campouce. We hope to get a table for next years event. PineTab-V Author: Caffeine We are happy to announce that the PineTab-V is back in the store! Last year we reported that the PineTab-V would be going on sale in October, unfortunately this did not happen due to there being no default OS to send to the factory. Thanks to our friends over at StarFive, they have kindly built a working image to send to the factory (thank you!). The image is based on Debian with a Gnome desktop. Much of the hardware is working including the cameras, WiFi and GPU accelerati ## PINE64 January 2025 Update Covers PineVox Firmware, PineNote Software, and Community Projects DevFeed: [PINE64 January 2025 Update Covers PineVox Firmware, PineNote Software, and Community Projects]() Original publisher: [Read original article]() Published: 2025-01-11T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Software](), [Embedded Software Dev](), [Development](), [Home Assistant](), [lora](), [meshtastic](), [USB](), [Bluetooth LE](), [Wi-Fi](), [.NET Conf]() Tags: [2025](), [bluetooth-le](), [community-update](), [firmware](), [fosdem](), [home-assistant](), [infinitime](), [lora](), [meshtastic](), [news](), [pinebook-pro](), [pinenote](), [pinetime](), [pinevox](), [release](), [right](), [streaming](), [update](), [usb]() ### AI overview PINE64's January 2025 community update covers planned PineVox public release work, continued PineNote software improvements, developer devices, the second PineDio USB LoRa adapter project, FOSDEM attendance, and PineVox firmware progress. ### Source excerpt This month we report on some news concerning the PineVox, what the community have been up to with their PineNotes and the brand-new 1.15 InfiniTime update. We would like to wish our community a happy New Year and hope you all had a good end of 2024. But since it's now the beginning of 2025, we'd like to fill you in on what we have planned for the first part of the year. We plan to release the PineVox to the public thanks to Gamiee's recent progress and we plan to continue improving the software for the PineNote, thanks to Maximilian, Diederik and our testers in the community. We have some exciting devices coming as well, mentioned in previous community updates. The PineCam and StarPro64 have been sent to developers in our community, so we hope to report on these devices in the coming months. Gamiee has also been working with a group of our friends over at Meshtastic on an independent project which will become the second version of the PineDio USB LoRa adapter. We plan to talk more about the progress of that project more in the February update. Table of contents FOSDEM PineVox PineNote Important - Software Update Issue Development updates PineNote Community Spotlight Inkput Pinescreen InfiniTime 1.15 Pinebook Pro Community content PineNote CE first month review Want to contribute to the next community update? FOSDEM Author: Caffeine Unfortunately, a stand at FOSDEM hasn't been allocated for us this year. But that doesn't mean we won't be there to represent PINE64! Gamiee, Ralimtek, JF, TL Lim and Lukasz will be attending in person this year and will be planning a get-together. We will announce on our social-media when we have confirmed the time and place. Of course, our PINE64 community members will still be wandering around the event, we love talking to all our friends at other projects and meeting the members of our community! So we hope we'll see you there! PineVox Author: Caffeine, Gamiee Gamiee has been working on the firmware for the PineVox recently (haha, now ## Please refrain from installing WASP-OS on new PineTimes for the moment DevFeed: [Please refrain from installing WASP-OS on new PineTimes for the moment]() Original publisher: [Read original article]() Published: 2024-12-29T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Software](), [Hardware](), [GitHub](), [Documentation]() Tags: [bootloader](), [documentation](), [end-of-life](), [eol](), [github](), [hardware](), [infinitime](), [pinetime](), [version]() ### AI overview The article warns users not to install WASP-OS on PineTime devices with factory bootloader v1.0.1 because the reloader tool does not yet support a replacement flash chip, which can soft-brick the device when reverting to InfiniTime. ### Source excerpt In July 2024, PineStore notified the community that a small hardware change was needed on the PineTime: the current flash chip was end of life (EoL) and needed to be replaced by a new one. From the software point of view, the new chip behaves exactly like the old on so very few code changes were required to support it. The new chip exposes different identifiers (manufacturer ID, for example) than the previous one. Which means that if the software checks those IDs, it would need to be updated to take the new ones into account. No change was needed in InfiniTime, but we however added a new field in the SystemInfo app to display the IDs of the chip. We figure this could be useful in the future. The bootloader does check against those IDs so we released a new version of the bootloader (v1.0.1) as well. We provided the new software to PineStore so they could test them and use them to flash the new batch of PineTimes at the factory. Everything went well and PineTimes equipped with the new memory chip and software are being delivered to happy users. Everything? Well, not really: a few users reported soft-bricked PineTimes after switching to WASP-OS and then reverting to InfiniTime again. This is a bummer: the "reloader" tool that reinstalls the InfiniTime bootloader also needed to be upgraded to support the new memory chip! An issue has already been opened on the WASP-OS GitHub repo and a new reloader tool will hopefully be released soon to tackle this issue. We also added a big red warning on the documentation page that explains how to switch to and from InfiniTime and WASP-OS to ensure that users won't try to switch OS until the issue is fixed and the documentation updated. Warning In the meantime, do not try to install WASP-OS on your PineTime if it's running bootloader v1.0.1 from the factory (unless you know exactly what you are doing), this WILL brick your PineTime! Be sure that the community will try to fix this as soon as possible, but please remember that develope ## November 2024 Pine64 Community Update Introduces the PineCam and Covers Other Projects DevFeed: [November 2024 Pine64 Community Update Introduces the PineCam and Covers Other Projects]() Original publisher: [Read original article]() Published: 2024-11-21T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Hardware](), [Single Board Computer](), [SOC](), [RISC-V](), [Linux](), [webcam](), [Specifications]() Tags: [avaota-a1](), [camera](), [community-update](), [hardware](), [linux](), [ox64](), [pinecam](), [pinedio](), [pinenote](), [pinetab-v](), [risc-v](), [single-board-computer](), [soc](), [specifications](), [usb]() ### AI overview Pine64's November 2024 community update introduces the PineCam, a successor to the PineCube based on the Oz64 single-board computer and SG2000 SoC. It also provides updates on other Pine64 projects and community activities. ### Source excerpt Welcome back to a new monthly Pine64 community update! This month we are announcing a couple of new products including a SBC and a successor to the PineCube. We have updates to share about the PineNote and the PineDio USB adapter this month along with a talk by one of our community members Dsimic. Table of contents PineCam Yuzuki Avaota-A1 PineNote Attention to all users who have ordered/received a PineNote For general users wanting to purchase a PineNote PineNote News PineTab-V BarCamp Talk About Pine64 and Ox64 Handout PineDio Community content Monthly community updates Want to contribute to the next community update? PineCam Authors: Lukasz, Caffeine The first new device we will be introducing this update is the PineCam! The PineCam is a successor to the PineCube IP camera, but with a much more polished design, better specifications and more features. While the PineCube didn't achieve the success the project had hoped for, we believe it wasn't due to a lack of interest in such hardware, but rather the way it was executed. We've gathered feedback, learned from what went wrong, and have gone back to the drawing board. This time, the PineStore have decided to take a different approach, using a System-on-Chip (SoC) already in our hardware lineup. The device includes more RAM (compared to the PineCube's 128MB), and utilizes a camera interface that "just works". The PineCam is based on the oz64 single board computer which is powered by the SG2000 system on a chip found in the new Oz64. The SOC includes two RISC-V cores (C906 @1Ghz + C906 @700Mhz) and one ARM core (Cortex-A53 @1Ghz). You can find more information on the specifications of the Oz64 and the SOC it's using here. The device features 512MB of RAM, providing just enough memory to run a full Linux-based OS such as MotionEyeOS, a popular surveillance camera operating system. Specific to the PineCam now, the device includes a 2MP camera module which is the same one found in the PineTab 2/-V (the GalaxyCore GC02M2 ## Pine64 September 2024 Community Update Covers RISC-V Hardware and Device Development DevFeed: [Pine64 September 2024 Community Update Covers RISC-V Hardware and Device Development]() Original publisher: [Read original article]() Published: 2024-10-02T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [RISC-V](), [Hardware](), [Single Board Computer](), [Open Source](), [Pinephone](), [Pinephone-Pro]() Tags: [community-update](), [hardware](), [ironos](), [open-source](), [pinecil](), [pinenote](), [pinephone](), [pinephone-pro](), [pinetime](), [risc-v](), [single-board-computer]() ### AI overview Pine64's September 2024 community update reviews new hardware and device development, with particular attention to the RISC-V platform and the StarPro64. It also lists operating-system progress, product updates, community projects, and infrastructure news. ### Source excerpt Hello and welcome back to another Pine64 community update! The community has been hard at work behind the scenes with development of new hardware along with bringing back some previously manufactured products. Of course, we will also go over the current state of our devices as well. And just before you ask, yes it is October. Most of the work for this update was done last month. We'd also like to thank you for your patience, it's been difficult with a most of us having limited time to work on these updates. We will continue to write and release these updates as fast as we can and continue to become more consistent again like we used to be. Thanks! Table of contents Updates New products announcements StarPro64 Oz64 Quartz64-Zero PineNote Operating System Progress Mobian PostmarketOS Call For Contributors! PineTab-V PinePhone Pro PinePhone Pinecil / IronOS Stability Timer weirdness New Screen Driving / GUI Handling New from Ralim Quartz64/RK3568 PineTime PineStore announcement: small hardware change InfiniLink Blog posts about the PineTime Rework of ITD Flatpak package for Amazfish PineTime integration in MyGnuHealth The super-power of open source InfiniEmu InfiniTime Status PineDio Community Updates Infrastructure and Moderation Lomiri on PostmarketOS GTK3 inspired watchface Want to contribute to the next community update? Updates New products announcements StarPro64 Author: Lukasz The PINE64 project and PineStore have been committed to bringing more devices based on the RISC-V architecture since three years ago. Since 2021, several devices including the Pinecil -- PINE64's most popular hardware -- have adopted this architecture. While the Ox64 may have been the first Linux-capable single-board computer (SBC) technically, the first full-fledged PINE64 RISC-V SBC was the Star64, which laid the foundation for the PINETAB-V tablet introduced last year alongside its ARM sibling, the PineTab2. Although significant development is still needed for the JH7110, interest in the ## March Update: Making waves DevFeed: [March Update: Making waves]() Original publisher: [Read original article]() Published: 2024-03-17T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [smart speaker](), [Home Assistant](), [Hardware](), [Embedded Software Dev]() Tags: [cluster](), [firmware](), [fosdem](), [hardware](), [headphones](), [home-assistant](), [ironos](), [pinecil](), [pinetime](), [pinevox](), [smart-speaker](), [update]() ### AI overview Pine64's March update describes two products in development: the PineVox, a BL606P-based smart speaker intended for Home Assistant voice interactions, and unnamed bone-conduction headphones using the BES2300 chipset. The PineVox is undergoing firmware development, while the headphones' enclosure and software are not yet final. ### Source excerpt Banner artwork: Caffeine New products in development Authors: Ralim, gamiee As probably one of the most anticipated sections of the blog, we can confirm that there are more new products in the pipeline. The first two were shown at the FOSDEM table in Feburary. PineVox - Virtual assistant The PineVox is a BL606P based home assistant smart speaker. Designed to help build a good community option for voice interactions with software such as Home Assistant. Currently a small number of developer seed units have been given out. Work is ongoing by Ralim & Gamiee to get a minimal firmware image ready to allow for demonstration and to prove all hardware fully functional etc. More information on the unit should be available soon on our new documentation page. Features of note include the hardware microphone kill switch, and the ability to debug the unit externally. The hardware microphone killswitch allows the software to mute the microphone but unmuting has to be performed using the button on the device. Muting the microphone disables the clock connection to the microphone, giving peace of mind that it really, really isnt listening to you. Giving users control of the smart devices in their home and allowing for you to control the security is important, and we are working on the PineVox to help enable that future. Another notable aspect worth mentioning is the speaker. Designed specifically for voice applications rather than music playback, it ensures clear and high-quality voice audio reception. Bone conduction headphones These are a set of bone conduction headphones using the same BES2300 chipset as found in the PineBuds Pro. The plan is to expand OpenPineBuds project with support for these before they enter manufacturing. Currently there is amazing work going on to sort out licencing of the BES2300 codebase; so work to support these is being done carefully to minimise impact on the code base. The enclosure design is not final yet, nor is the software complete. However in th ## Outage January 21st DevFeed: [Outage January 21st]() Original publisher: [Read original article]() Published: 2024-01-21T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Website](), [Wiki](), [version]() Tags: [beta](), [bugs](), [cluster](), [community](), [documentation](), [issue](), [outage](), [pages](), [state]() ### AI overview PINE64 reports an outage affecting its main cluster and says it is investigating the cause. A temporary beta website has been deployed, while documentation pages may be unstructured, outdated, and inconsistent with the wiki's current state. ### Source excerpt We regret to inform you that we are currently experiencing an outage in our main cluster. We are currently actively investigating the cause of this issue. We understand the inconvenience this may cause and appreciate your patience during this time. In the meantime, we have deployed a beta version of our website to ensure that information are still reachable for the community. Please note that this is a quick and temporary solution - bugs are expected and the documentation pages are not structured yet and might be outdated and not reflect the current state of the wiki, which is affected by the outage as well. Thank you for your understanding! ## PINE64 August Community Update Covers Collaborative Publishing and Hardware and Software Progress DevFeed: [PINE64 August Community Update Covers Collaborative Publishing and Hardware and Software Progress]() Original publisher: [Read original article]() Published: 2023-08-15T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pinephone-Pro](), [Embedded Software Dev](), [Pinephone](), [Ubuntu](), [NVMe](), [pcie](), [USB](), [ui]() Tags: [blog-post](), [community](), [community-update](), [devices](), [firmware](), [infinitime](), [news](), [update]() ### AI overview PINE64's August community update introduces collaborative authoring for future monthly posts and reviews recent progress across its devices and software. It covers PineTab2 and PineTab-V development, PinePhone Pro thermal-camera use, Ubuntu Touch, Quartz64 and SOQuartz, U-Boot support, PineTime and InfiniTime improvements, and related firmware and battery-life work. ### Source excerpt We apologize for the lack of regular community updates during the past few months. In short, the people who usually wrote them became very busy. However, we have a new way to write and publish these updates, involving you: the community. Let's talk about it, and about so much more of what's been happening. This community update consists of contributions by Caffeine, CounterPillow, Funeral, gamiee, JF002, and mpreditor. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. TL;DR Housekeeping Community updates are now written collaboratively by several members of the community The public is invited to contribute to the monthly update posts Rework of the community website and logo Newsflash megi released rk2aw: a loader for your bootloader Progress on the PineTab2 and PineTab-V A PinePhone Pro connected to a thermal imaging camera Oren Klopfer's progress on Ubuntu Touch Quartz64 and SOQuartz U-Boot improvements thanks to Kwiboo and CounterPillow: USB, NVMe, and soon PXE Improved SOQuartz CM4 baseboard compatibility Improved PCIe devices compatibility QuartzPro64 What it means to "mainline" things, and why it takes time Things that have been mainlined: SATA, PCIe, USB, AV1, and more! Things still being worked on: cpufreq, GPU, video output InfiniTime 1.13 and other PineTime news Heart rate monitoring improvements thanks to Ceimour! Did you know that InfiniTime has a BLE weather service feature? Improved memory management Huge improvements to battery life (with help from Ayke!) InfiniSim UI update Improvements to ITD, the InfiniTime daemon Ayke is developing a brand new firmware for the PineTime Housekeeping You might have been wondering why nothing new has been posted on the PINE64.org community blog in quite a few months. As was already revealed in the opening section, the reason is that previously blogs were mainly authored and edited by one person (Lukasz) and said person is extremely busy these days. Going forward, ## Quick update: What's going on? DevFeed: [Quick update: What's going on?]() Original publisher: [Read original article]() Published: 2023-08-12T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Cryptocurrency](), [coinbase](), [FOSDEM](), [Linux]() Tags: [announcements](), [coinbase](), [community](), [community-update](), [cryptocurrency](), [fosdem](), [linux](), [payments](), [update]() ### AI overview PINE64 explains the pause in its community updates, announces that the Pine Store now accepts USD Coin payments through Coinbase, and invites the community to a meetup in Warsaw. ### Source excerpt Welcome to our long-awaited community post, where we aim to address the most commonly asked question while also unveiling some more news. Let's get started! Why hasn't there been a community update for the past few months? Is PINE64 dead? As you may have noticed, there haven't been any community updates as of late, and we are sorry for the prolonged silence. This isn't because the community hasn't been busy, quite the opposite is true. Instead, the problem is that the usual community update authors are too busy with their daily jobs and other tasks around the community. Although thanks to some community members who have shown interest to participate, we are working on a new community update and we hope we will publish it soon! Pine Store now accepts payments in cryptocurrency. The community has consistently expressed interest in paying on the Pine Store with cryptocurrency, and despite several previous attempts to find a suitable crypto payment service, the process has proven challenging, leading to eventual failure. However, we are happy to announce that Pine Store now facilitates payments using USD Coin cryptocurrency via Coinbase! Talk to us at our upcoming community meetup in Warsaw! We always attempt to meet in person at least twice a year. For reasons that ought to be obvious to everyone, this wasn't possible these past few years, but now that travel is once again viable we're returning to a bi-annual meetup schedule. We always meet at FOSDEM in February followed by a meeting halfway through the calendar year. While FOSDEM primarily serves the function of interacting with the broader Linux community and members of other projects as well as product announcements, the second yearly meetup aims at evaluating the project's progress, identifying issues, and creating a roadmap for the coming months. This year we're holding the second meetup in Warsaw. TL, Ayufan, Lukasz, and I will be having lunch in Hala Gwardii on Sunday, August 20th at noon. The place offers a wi ## A new design DevFeed: [A new design]() Original publisher: [Read original article]() Published: 2023-04-13T00:00:00Z Content type: release Language: en Sources: [Community blog on PINE64]() Topics: [Website](), [Hugo](), [WordPress](), [Markdown](), [JavaScript](), [HTML]() Tags: [beta](), [community](), [hugo](), [javascript](), [markdown](), [pine64](), [redesign](), [website-redesign](), [wordpress]() ### AI overview PINE64 announces a beta preview of a community website redesign. The redesign is intended to encourage community contributions and feedback, and it uses Hugo to generate static HTML pages from Markdown and other content formats. It also aims to reduce JavaScript and external connections, including by using locally stored YouTube previews. ### Source excerpt As it was teased with the March update and the December blog post of last year, there is a community website redesign being worked on. Launched at beta.pine64.org we're proud to give a very early insight of what the redesign currently looks like. To give a warning in advance, in this preview of the redesign, you will find a lot of unfinished parts, run into issues and maybe there are things you liked at the old (current) page more. That's what the beta launch is for. While the old website was run on Wordpress and maintained by a handful of people, the idea of the new community website redesign after being started as a project of a single person is, that everyone can contribute to the community website. That's why the redesign is launched early: to gather feedback, to gather ideas and to involve everyone interested in contributing so that there will be a nicely working website available later. Some technical details To give an insight into some technical details: The former website was running on Wordpress. While easy to use, this also means there was a lot of heavy Javascript, connections to third-party websites (like Google fonts) constantly had to be prevented by adjusting site settings and if people found typos in the blog post then admins had to be asked to fix them. The redesign tries to go a different way. It uses Hugo ("The world's fastest framework for building websites") and it creates static html pages from content formats such as Markdown, Pandoc and AsciiDoc (see Hugo - Content Formats for the supported formats). In fact this blog post you are reading is written in Markdown - show and edit this blog post under a_new_design.md. The redesign tries to avoid using Javascript as much as possible. Javascript is currently only used on the front page to click between the slider images, as well as the YouTube preview (more about this below). The slider will work just fine with disabled Javascript. There are no CDNs used in the redesign. No Google Fonts, no extern ## PineTab-V and PineTab2 launch DevFeed: [PineTab-V and PineTab2 launch]() Original publisher: [Read original article]() Published: 2023-04-10T00:00:00Z Content type: release Language: en Sources: [Community blog on PINE64]() Topics: [Hardware](), [RISC-V](), [SOC](), [Linux](), [Single Board Computer]() Tags: [arm](), [battery](), [c](), [camera](), [keyboard](), [launch](), [lcd](), [linux](), [pinetab](), [pinetab-v](), [pinetab2](), [risc-v](), [soc](), [usb]() ### AI overview PineTab-V and PineTab2 launch with pre-orders starting April 13. Both tablets have the same display, cameras, battery, USB-C connectivity, detachable keyboard, storage options, and $159 starting price. PineTab2 uses an Arm RK3566 SoC and ships with DanctNix Arch Linux for Arm, while PineTab-V uses a RISC-V JH7110 SoC, ships without an operating system, and is presented as an experimental development platform for improving Linux support. ### Source excerpt The PineTab2 and PineTab-V pre-orders begin on April 13th. Both tablets feature a 1200x800 10.1" IPS LCD panel with wide viewing angles, a sturdy metal metal chassis, two USB-C ports (1x USB 3.0, 1x USB 2.0 with charging), a digital video out port, a front 2MPx and rear 5MPx camera as well as a 6000mAh battery. Both come bundled with a magnetically fitted detachable backlit keyboard (connecting via pogo pins using USB 2.0 protocol) that doubles up as a carry case, and are available in two hardware configurations: 4GB LPDDR4 RAM / 64GB eMMC 5.1 flash storage and 8GB LPDDR4 RAM / 128GB eMMC 5.1 flash storage. Finally the PineTab2 and PineTab-V both start at $159. On the outside the only thing that differentiates the two devices is the color of the chassis: the PineTab-V is deep matte black while PineTab2 is silver-gray. But the real difference between the two resides on the inside. The PineTab2 features the well supported RK3566 64-bit Arm SoC, which has been a part of our line-up for over a year, and the tablet ships with a build of DanctNix Arch Linux for Arm. The software can be best described as early but very serviceable, and there is little doubt that before long improvements will be made and additional functionality enabled. Like the PinePhone and PinePhone Pro before it, the PineTab2 will reach a high degree of functionality in time and make for a great work or entertainment travel companion. First image: PineTab2 PCB with RK3566. Second image: PineTab-V with JH7110 Unlike the PineTab2, the PineTab-V is based on the JH7110 64-bit RISC-V SoC. In late 2022 we announced our plans to help grow the RISC-V hardware ecosystem alongside our existing Arm-based device line-up (see 2023 Sneak Peek section in December Community Update) - to this end the PineTab-V is to the Star64 single board computer released earlier this month what the PineTab2 is to the Quartz64. The JH7110 RISC-V SoC, and the RISC-V architecture in more general, is currently best described as having l ## March Update: Tablet Bonanza! DevFeed: [March Update: Tablet Bonanza!]() Original publisher: [Read original article]() Published: 2023-04-01T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pine64](), [Pinetab2](), [Pinenote](), [Software](), [Pinephone](), [Pinephone-Pro](), [Hacking](), [DDoS](), [Ubuntu]() Tags: [attacks](), [blog-post](), [community-update](), [hacking](), [news](), [pine64](), [pinenote](), [pinetab-v](), [pinetab2](), [quartz64](), [software](), [unicorn](), [update]() ### AI overview PINE64's March community update announces April availability dates for Star64, PineTab2, and PineTab-V, and covers PineNote development, software progress, and PineTab2 performance expectations. It also reports recent attacks on the PineStore and other community updates. ### Source excerpt We end the first quarter of the year with news that Star64 will be available for purchase on April 4th and that the PineTab2 and PineTab-V(ery good!) will launch the following week on April 11th. In this month's update we also cover PineNote development (I know many of you have been waiting for this) and discuss how software on the device has really taken off in recent months. Finally, CounterPillow - a key RK3566 community developer - sets the expectations for the PineTab2 with some real-life performance examples. Strap on your unicorn horns because there's much ground to cover this month - let's get to it. You can watch the synopsis of this month's community update on YouTube (embedded below) as well as on Odysee and PeerTube. To stay up-to-date with PINE64 news make sure to subscribe to this blog (subscription widget at the bottom of the webpage), follow the PINE64 Telegram News channel, the announcements channel in Discord as well as our Twitter and Mastodon. I'd like to thank Alex (clover), CounterPillow and Maximilian Weigand and PizzaLovingNerd for their contributions to this community update. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. Note: This image preview protects your privacy. Click to load the video from the Google servers. Link to the video & Video synopsis of this month's update TL;DR Housekeeping We held our 5th community Q&A session mid-March; thank you to all those who showed up; you can watch the recorded live-stream on Youtube, PeerTube and Odysee The PineStore has been targeted by DDOS and hacking attacks recently, which caused page time-outs and general inconvenience; rest assured nothing was compromised The reworked community site is taking shape and its looking great - help us test it starting April 15 PINE64 EU Pinecil restock on April 1st instead of March 31st Newsflash Star64 will be available on April 4th in two configurations: 4GB and 8GB LPDDR4 memory for $69.99 and $89.99 r ## February update: things are taking shape DevFeed: [February update: things are taking shape]() Original publisher: [Read original article]() Published: 2023-03-01T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Pine64](), [Pinephone](), [Pinetab2](), [FOSDEM](), [Pinebook-Pro]() Tags: [community-update](), [fosdem](), [pine64](), [pinebook-pro](), [pinephone](), [pinephone-keyboard](), [pinephone-pro](), [pinetab2](), [quartz64](), [soquartz](), [star64](), [update]() ### AI overview This PINE64 community update covers PineTab2 pricing and SKU variants, the expected availability of Star64, recent PinePhone development, and other community, store, hardware, software, and firmware updates. ### Source excerpt Let me start by apologizing to everyone for skipping yet another monthly community update. This has largely been my fault as I was rather busy in January and following FOSDEM at the start of February I found myself occupied with things related to the EU store. I hope for things to go back to normal now; you can expect future community updates at the end of each month as per usual. Again, I apologise, mea culpa. I hope that this month's update and the news it brings will more than make up for the wait: the Nestflash section is absolutely packed this month, we're revealing PineTab2's pricing and SKU variants (both of which I'm sure you'll be pleased with), announcing that Star64 will be available in the next 6 weeks (or so) and report on all the work that has gone into PinePhone (Pros) development in the recent two months ... and much more Let's get to it. You can watch the synopsis of this month's community update on YouTube (embedded below) as well as on Odysee and PeerTube. To stay up-to-date with PINE64 news make sure to subscribe to this blog (subscription widget at the bottom of the webpage), follow the PINE64 Telegram News channel, the announcements channel in Discord as well as our Twitter and Mastodon. I'd like to thank Alex (clover), JF, Danct12, William Starkey, Alex Horner, River-Mochi, Biktorgj and PizzaLovingNerd for their contributions to this community update. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. Note: This image preview protects your privacy. Click to load the video from the Google servers. Link to the video & Video synopsis of this month's update TL;DR Housekeeping FOSDEM was great - thank you to all who came and chatted with us at the stall Pine Store is getting back to normal following CNY Next quarterly community Q&A on 17 March at 20:00 CET - be there or be square PINE64 EU full restock on March 1st Newsflash New release for R-Cade for Rock64, RockPro64 and Pinebook Pro is excellen ## December Update: Merry Christmas and Happy New PineTab DevFeed: [December Update: Merry Christmas and Happy New PineTab]() Original publisher: [Read original article]() Published: 2022-12-15T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Hardware](), [RISC-V]() Tags: [announcement](), [community](), [community-update](), [fosdem](), [hardware](), [incident](), [pine64](), [pinecil](), [pinephone](), [pinephone-pro](), [pinetab](), [quartz64](), [quartzpro64](), [update]() ### AI overview PINE64's December community update announces the PineTab2, reviews the company's 2022 hardware launches, and previews 2023 plans. It also covers a delayed Star64 launch, progress on Quartz-series devices, Pinecil V2 updates, community moderation, and upcoming events and store activity. ### Source excerpt Merry Christmas, happy holidays and a Happy New Year to you all. This month's update has a different formula from the usual - aside from the announcement of the PineTab2, most of this month's content is dedicated to looking back at this year and taking a sneak peak at what's to come in 2023. I think that if you read between the lines, even poorly, you'll get a good idea of what we'll be up to next year. We have a lot of ground to cover in this update so let's get to it. You can watch the synopsis of this month's community update on YouTube (embedded below) as well as on Odysee and PeerTube. To stay up-to-date with PINE64 news make sure to subscribe to this blog (subscription widget at the bottom of the webpage), follow the PINE64 Telegram News channel, the announcements channel in Discord as well as our Twitter and Mastodon. I'd like to thank Alex (clover), Gamiee, Danct12, Pillow, Thanos, Immy and PizzaLovingNerd for their contributions to this community update. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. Note: This image preview protects your privacy. Click to load the video from the Google servers. Link to the video & Video synopsis of the December community update TL;DR Housekeeping Thank you for 2022 everyone! November community Q&A is now on Youtube and Odysee if you missed it We've got a FOSDEM 2023 stall - we're on the floor both days, come and see us Work on the new website is coming along PINE64 EU store restock before Christmas We've had an incident in #off-topic channel - we're on it and working towards better moderation of all chats Newsflash Star64 launch delayed due to review; striving to make it available before CNY Ox64 among the fastest selling PINE64 hardware Pillow has done much work on the Quartz64, SOQuartz and QuartzPro64 in the past month; much work has gone into mainlining and critical bug fixes - significant progress Much Pinecil V2 news and showcases: new Pinecil V2's ship with f ## PINE64 November Update Covers Hardware Availability and Community Projects DevFeed: [PINE64 November Update Covers Hardware Availability and Community Projects]() Original publisher: [Read original article]() Published: 2022-11-15T00:00:00Z Content type: article Language: en Sources: [Community blog on PINE64]() Topics: [Development](), [Hardware](), [Pinephone](), [Pinephone-Pro](), [lora](), [gateway]() Tags: [announcements](), [availability](), [community](), [community-update](), [hardware](), [ox64](), [pinebuds](), [pinephone](), [pinephone-pro](), [pinetime](), [software-development](), [star64](), [update]() ### AI overview PINE64's November community update announces expected availability for the PineBuds Pro, Ox64, and Star64, while warning that zero-COVID restrictions could change predicted dates. It also covers restocks, community projects, software development, and upcoming products. ### Source excerpt We've got three key hardware availability announcements this month: for the PineBuds Pro, the Ox64 and Star64, all of which ought to be available in the coming weeks. However, reading this update I'd like you to keep in mind that Chinese factories and logistics are currently experiencing significant restrictions due to the zero-COVID policy. This means that some of the predicted availability dates may change. That aside, we've got a great update for you this month, so tune in and let's get to it. You can watch the synopsis of this month's community update on YouTube (embedded below) as well as on Odysee and PeerTube. To stay up-to-date with PINE64 news make sure to subscribe to this blog (subscription widget at the bottom of the webpage), follow the PINE64 Telegram News channel, the announcements channel in Discord as well as our Twitter and Mastodon. I'd like to thank Alex (clover), Gamiee, Danct12, mothenjoyer69 and PizzaLovingNerd for their contributions to this community update. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. Note: This image preview protects your privacy. Click to load the video from the Google servers. Link to the video & Synopsis in video format TL;DR Housekeeping Community Q&A November 25th 20:00 UTC; your chance to ask us questions live in the chat We're reworking the main PINE64 website to better reflect the community aspect of the project; we can't til you see it PINE64 EU restock of most hardware; Pinecil V2 available on Nov. 14, 19, 24, 29 an in December Newsflash Newsflash - new segment of the update focusing on shorter stories focusing on community projects, software development and smaller announcements Pinecil mod adds LED lights powered from the iron A DIY LiPo battery pack for the Pinecil (V2) An awesome PinePhone (Pro) keyboard case adds RGB backlight to the keyboard Roshambo retro-game console case with matching controllers and carts available in Pine Store soon PineDio Lo ## InfiniTime 1.11 DevFeed: [InfiniTime 1.11]() Original publisher: [Read original article]() Published: 2022-10-18T00:00:00Z Content type: release Language: en Sources: [Community blog on PINE64]() Topics: [Embedded Systems](), [Filesystems](), [Pine64]() Tags: [contributors](), [embedded-systems](), [file](), [infinitime](), [new-features](), [pine64](), [pinetime](), [release]() ### AI overview Pine64 announces the InfiniTime 1.11 release, which includes two new watch faces and improvements developed over three and a half months. The release adds support for using the PineTime's external flash memory to store fonts and pictures for applications and watch faces. ### Source excerpt We released InfiniTime 1.11 a few days ago. The timing of the release did not align with the monthly community update, so we decided to write a small blog post to highlight a few new features and provide new about the PineTime community! InfiniTime 1.11 is the result of three and a half months of work from many contributors. 59 pull request have been merged with changes ranging from new watch faces to small bug fixes passing by improvements in multiples area of the project. I'll highlight a few of these new changes in this post, and feel free to read the whole release note for more information! InfiniTime 1.11 brings 2 new watch faces! External resources As you may know, InfiniTime is currently quite constrained by the memory space available in the PineTime. Both RAM and flash memories are quite well packed, and we have to ensure that the changes we include in the project will actually fit in the remaining memory available. But we are not doomed to save any byte in memory forever, and we have multiple options to give InfiniTime a bit of fresh air! If you read the Pine64 monthly community updates, you may have noticed that I wrote about the usage of the external flash memory of the PineTime for some time now. Remember the blog post from December 2021 where I teased a few watch faces with custom backgrounds ? Nearly a year, that's the time it took to put all things together to make this happen : InfiniTime can now use the external flash memory to store fonts and pictures and make them available to applications and watch faces! Testing custom backgrounds back in December 2021 This feature will bring a lot of possibilities in the future : the external memory is a 4MB flash memory. It's really huge compared the the 512KB available in the main memory of the PineTime. In the future, we'll be able to move more and more data from the internal to the external memory, which will free very precious space to add more and more features to InfiniTime! What did it take to build thi [Next page]()