# ipSpace

Published articles for ipSpace.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Hint: Grab the vJunos Images If You Need Them

DevFeed: [Hint: Grab the vJunos Images If You Need Them](<https://devfeed.tech/articles/hint-grab-the-vjunos-images-if-you-need-them-146231.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/grab-junos-images/>)

Published: 2026-11-20T07:29:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Website](<https://devfeed.tech/topics/website.md>), [virtualization](<https://devfeed.tech/topics/virtualization.md>)

Tags: [archive](<https://devfeed.tech/tags/archive.md>), [community](<https://devfeed.tech/tags/community.md>), [domain](<https://devfeed.tech/tags/domain.md>), [download](<https://devfeed.tech/tags/download.md>), [downloads](<https://devfeed.tech/tags/downloads.md>), [google](<https://devfeed.tech/tags/google.md>), [google-search](<https://devfeed.tech/tags/google-search.md>), [grab](<https://devfeed.tech/tags/grab.md>), [hint](<https://devfeed.tech/tags/hint.md>), [hpe](<https://devfeed.tech/tags/hpe.md>), [image](<https://devfeed.tech/tags/image.md>), [images](<https://devfeed.tech/tags/images.md>), [juniper](<https://devfeed.tech/tags/juniper.md>), [marketing](<https://devfeed.tech/tags/marketing.md>), [networking](<https://devfeed.tech/tags/networking.md>), [pages](<https://devfeed.tech/tags/pages.md>), [redirect](<https://devfeed.tech/tags/redirect.md>), [results](<https://devfeed.tech/tags/results.md>), [search](<https://devfeed.tech/tags/search.md>), [switch](<https://devfeed.tech/tags/switch.md>)

### AI overview

The excerpt reports that the "Free Virtual Junos OS Downloads" page on juniper.net returns an HPE-branded 404 after the domain redirect. It says support.juniper.net still works and image download links in sources such as containerlab.dev remain usable, while warning those links could stop working. The author recommends downloading the vJunos images while they are available.

### Source excerpt

HPE Marketing (I'm guessing ;) decided to redirect the juniper.net domain to hpe.com. No big deal if done right. It wasn't. The first sign of trouble was the broken community.juniper.net website, where all pages redirected to the first page of community.networking.hpe.com. Fortunately, they fixed that one. Yesterday, I wanted to download the new version of the vJunos-switch image, and the "Free Virtual Junos OS Downloads" URL that's still at the top of Google search results shows an HPE-branded 404 page on the juniper.net website (archive.org still has the original page). Read more ...

## Worth Reading: LLM-Based Program Verification

DevFeed: [Worth Reading: LLM-Based Program Verification](<https://devfeed.tech/articles/worth-reading-llm-based-program-verification-142343.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/worth-reading-llm-program-verification/>)

Published: 2026-11-18T10:55:00Z

Content type: opinion

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Formal verification](<https://devfeed.tech/topics/formal-verification.md>), [Large Language Model](<https://devfeed.tech/topics/llm.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [article](<https://devfeed.tech/tags/article.md>), [exploits](<https://devfeed.tech/tags/exploits.md>), [formal](<https://devfeed.tech/tags/formal.md>), [llm](<https://devfeed.tech/tags/llm.md>), [llms](<https://devfeed.tech/tags/llms.md>), [program](<https://devfeed.tech/tags/program.md>), [reading](<https://devfeed.tech/tags/reading.md>), [verification](<https://devfeed.tech/tags/verification.md>), [worth-reading](<https://devfeed.tech/tags/worth-reading.md>)

### AI overview

The excerpt points to a researcher's article on using LLMs to verify program correctness, noting that the approach works. It cautions that similar verification tools existed before and were more optimized, likening LLM use for solvable tasks to running Unix through layers of emulation. The source offers no technical details or tool comparisons.

### Source excerpt

I'm busy finalizing the 26.11 netlab release and don't have the time or willpower for full-blown blog posts at the moment, so you'll get more pointers than anything else. I stumbled upon an interesting What's going on with program verification? article, in which a researcher working on formal program verification (which is what we'll badly need in the era of AI generating exploits at scale) describes the efforts to verify correctness with LLMs. Read more ...

## Worth Investigating (macOS): Kilobat

DevFeed: [Worth Investigating (macOS): Kilobat](<https://devfeed.tech/articles/worth-investigating-macos-kilobat-139714.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/kilobat/>)

Published: 2026-11-17T10:40:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Tool](<https://devfeed.tech/topics/tool.md>), [macOS](<https://devfeed.tech/topics/macos.md>)

Tags: [macos](<https://devfeed.tech/tags/macos.md>)

### AI overview

The author flags Philip Seifi's Kilobat as potentially useful for using a Mac in less-than-optimal environments, but says they have not tested it. Readers already using the tool are invited to share their experience.

### Source excerpt

After I published a pointer to Octomon, Philip Seifi sent me a kind message pointing out his Kilobat tool (documentation). I haven't tested it, but it seems like an interesting tool if you're using your Mac in less-than-optimal environments (Philip seems to be a digital nomad, who would thus know too much about those). If you're already using the tool, I'd like to hear from you - please leave a comment.

## Test Real-Life Routing Scenario with netlab

DevFeed: [Test Real-Life Routing Scenario with netlab](<https://devfeed.tech/articles/test-real-life-routing-scenario-with-netlab-134810.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/worth-reading-netlab-routing-scenario/>)

Published: 2026-11-16T06:28:00Z

Content type: tutorial

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [IP routing](<https://devfeed.tech/topics/ip-routing.md>), [BGP](<https://devfeed.tech/topics/bgp.md>)

Tags: [arista](<https://devfeed.tech/tags/arista.md>), [bfd](<https://devfeed.tech/tags/bfd.md>), [bgp](<https://devfeed.tech/tags/bgp.md>), [container](<https://devfeed.tech/tags/container.md>), [customer](<https://devfeed.tech/tags/customer.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [network](<https://devfeed.tech/tags/network.md>), [ospf](<https://devfeed.tech/tags/ospf.md>), [policies](<https://devfeed.tech/tags/policies.md>), [router](<https://devfeed.tech/tags/router.md>), [routing](<https://devfeed.tech/tags/routing.md>), [topology](<https://devfeed.tech/tags/topology.md>), [worth-reading](<https://devfeed.tech/tags/worth-reading.md>)

### AI overview

Tony Mattke's walkthrough recreates a customer routing scenario in netlab, starting by importing an Arista cEOS container and building a netlab file for an eight-router network. The resulting topology runs BGP, BFD, and OSPF with several routing policies. The supplied excerpt describes the setup but does not provide implementation details or comparisons.

### Source excerpt

In his Labs as Code, Part 2: Real Images, Real Topology article, Tony Mattke described how he used netlab to recreate a customer routing scenario. His article starts with the basics (importing an Arista cEOS container), and then slowly walks you through the process of building a netlab file that results in an 8-router network running BGP, BFD, OSPF, and a few routing policies. Absolutely marvelous reading if you're new to netlab or exploring its capabilities. Read more ...

## Public Videos: EVPN Technical Deep Dive

DevFeed: [Public Videos: EVPN Technical Deep Dive](<https://devfeed.tech/articles/public-videos-evpn-technical-deep-dive-131633.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/evpn-routing-videos/>)

Published: 2026-11-13T05:51:00Z

Content type: release

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [evpn](<https://devfeed.tech/topics/evpn.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [chatgpt](<https://devfeed.tech/tags/chatgpt.md>), [evpn](<https://devfeed.tech/tags/evpn.md>), [public](<https://devfeed.tech/tags/public.md>), [videos](<https://devfeed.tech/tags/videos.md>), [webinar](<https://devfeed.tech/tags/webinar.md>)

### AI overview

All videos from the "Routing in EVPN Fabrics" webinar have been made public, offering almost twelve hours of EVPN material. The excerpt announces access to the videos and adds humorous commentary about AI-generated networking imagery; it does not describe the videos' technical contents.

### Source excerpt

A reader asked how he could access the Routing in EVPN Fabrics videos, and the simplest thing for me to do was to make all the videos in the EVPN webinar public. Almost twelve hours of EVPN goodness is waiting for you. Explore the videos You probably noticed that I always ask AI to generate some weird image to go with the "free videos" blog posts. This time, ChatGPT made an extra comment ;) Read more ...

## Candidate Configuration on Cisco Nexus OS

DevFeed: [Candidate Configuration on Cisco Nexus OS](<https://devfeed.tech/articles/candidate-configuration-on-cisco-nexus-os-128962.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/candidate-active-configuration-nexus-os/>)

Published: 2026-11-11T07:16:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [configuration](<https://devfeed.tech/topics/configuration.md>), [Network Configuration](<https://devfeed.tech/topics/network-configuration.md>), [Cisco](<https://devfeed.tech/topics/cisco.md>)

Tags: [2020s](<https://devfeed.tech/tags/2020s.md>), [arista](<https://devfeed.tech/tags/arista.md>), [automation](<https://devfeed.tech/tags/automation.md>), [can](<https://devfeed.tech/tags/can.md>), [candidate](<https://devfeed.tech/tags/candidate.md>), [changes](<https://devfeed.tech/tags/changes.md>), [cisco](<https://devfeed.tech/tags/cisco.md>), [cisco-nexus](<https://devfeed.tech/tags/cisco-nexus.md>), [commit](<https://devfeed.tech/tags/commit.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [data-center](<https://devfeed.tech/tags/data-center.md>), [enterprise](<https://devfeed.tech/tags/enterprise.md>), [eos](<https://devfeed.tech/tags/eos.md>), [ios](<https://devfeed.tech/tags/ios.md>), [launch](<https://devfeed.tech/tags/launch.md>), [network](<https://devfeed.tech/tags/network.md>), [nexus](<https://devfeed.tech/tags/nexus.md>), [operating-system](<https://devfeed.tech/tags/operating-system.md>), [os](<https://devfeed.tech/tags/os.md>), [sessions](<https://devfeed.tech/tags/sessions.md>), [stage](<https://devfeed.tech/tags/stage.md>)

### AI overview

Cisco Nexus OS 10.6(3)F introduced a candidate configuration that snapshots the running configuration, lets users inspect changes with `show candidate-config diff` or the resulting configuration with `show candidate-config`, and supports commit, abort, and later resumption. The earlier two-stage commit was more limited: it lacked a reported equivalent of `show configuration merge`, worked only in interactive CLI according to the documentation, and allowed only one active session. The newer candidate feature still has feature gaps: on Nexus OS 10.6(4) Maintenance Release, an existing IS-IS configuration caused candidate mode to fail, and `show candidate-config last-unsupported` identified the affected IS-IS commands. The excerpt says OSPF is supported but IS-IS is not.

### Source excerpt

TL&DR: Third time is (supposedly) a charm. Not in this case. It's a bit hard to understand why one would launch an enterprise data-center-grade network operating system without candidate/active configuration in the 21st century, but that's what Cisco and Arista did with Nexus OS and EOS. Arista fixed that omission with configuration sessions more than a decade ago1. It took Cisco a bit longer. The first attempt was the so-called two-stage configuration commit, which is functionally almost identical to the Cisco IOS XR "candidate" configuration: Read more ...

## Worth Reading: BGP Multi-Homed with Two ISPs and Two Routers

DevFeed: [Worth Reading: BGP Multi-Homed with Two ISPs and Two Routers](<https://devfeed.tech/articles/worth-reading-bgp-multi-homed-with-two-isps-and-two-routers-123020.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/worth-reading-bgp-multihomed-two-isps/>)

Published: 2026-11-09T07:25:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [BGP](<https://devfeed.tech/topics/bgp.md>), [Network](<https://devfeed.tech/topics/network.md>)

Tags: [bgp](<https://devfeed.tech/tags/bgp.md>), [reading](<https://devfeed.tech/tags/reading.md>), [worth-reading](<https://devfeed.tech/tags/worth-reading.md>)

### AI overview

Suresh Vinasiththamby's BGP multihoming scenario covers practical details for building a working setup with two ISPs and two routers. The recommendation notes that Suresh used netlab to build the lab, making it possible to reproduce the scenario with non-Cisco devices. The excerpt does not specify the configuration details or which BGP requirements the article covers.

### Source excerpt

I was reading the nice BGP Multi-Homed with Two ISPs and Two Routers scenario by Suresh Vinasiththamby - Packetswitch and thought wouldn't it be nice if he were using netlab to build the lab, as that would give you the opportunity to build the same lab with zero hassle using non-Cisco devices. Guess what - Suresh already did just that. I was so glad to see someone using netlab in just the way I imagined it to be used. Read more ...

## Candidate and Active Configuration on IOS XR

DevFeed: [Candidate and Active Configuration on IOS XR](<https://devfeed.tech/articles/candidate-and-active-configuration-on-ios-xr-117165.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/candidate-active-configuration-iosxr/>)

Published: 2026-11-04T07:37:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Network Configuration](<https://devfeed.tech/topics/network-configuration.md>), [configuration](<https://devfeed.tech/topics/configuration.md>), [Transactions](<https://devfeed.tech/topics/transactions.md>)

Tags: [all](<https://devfeed.tech/tags/all.md>), [automation](<https://devfeed.tech/tags/automation.md>), [band](<https://devfeed.tech/tags/band.md>), [candidate](<https://devfeed.tech/tags/candidate.md>), [changes](<https://devfeed.tech/tags/changes.md>), [command](<https://devfeed.tech/tags/command.md>), [commit](<https://devfeed.tech/tags/commit.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [copy](<https://devfeed.tech/tags/copy.md>), [days](<https://devfeed.tech/tags/days.md>), [device](<https://devfeed.tech/tags/device.md>), [devices](<https://devfeed.tech/tags/devices.md>), [disaster](<https://devfeed.tech/tags/disaster.md>), [introduced](<https://devfeed.tech/tags/introduced.md>), [ios](<https://devfeed.tech/tags/ios.md>), [juniper](<https://devfeed.tech/tags/juniper.md>), [make](<https://devfeed.tech/tags/make.md>), [making](<https://devfeed.tech/tags/making.md>), [memory](<https://devfeed.tech/tags/memory.md>), [more](<https://devfeed.tech/tags/more.md>), [xr](<https://devfeed.tech/tags/xr.md>)

### AI overview

Unlike snapshot-based candidate configurations, IOS XR starts configuration mode with an empty set of commands. You can inspect the pending commands with `show configuration`, preview the result of `commit` or `commit replace` with `show configuration merge` or `show configuration replace`, and view proposed differences with `show commit changes diff`. `commit` merges the entered commands; `commit replace` replaces the active configuration, so using it immediately after entering configuration mode can wipe that configuration. The excerpt describes these behaviors but does not cover safeguards or recovery.

### Source excerpt

Traditional network devices used a single (active or running) configuration, with a snapshot of it stored in permanent memory (startup configuration). The active configuration was modified with every configuration command, making it a perfect recipe for disaster in the days of in-band configuration1. The situation improved drastically when Juniper introduced the candidate configuration. You could make changes to a copy of the configuration, and then commit them as a single all-or-nothing transaction. While you could still cut yourself off from the device, at least it was harder to do with a single misordered command. Read more ...

## Help Me Make the BGP Labs Even Better

DevFeed: [Help Me Make the BGP Labs Even Better](<https://devfeed.tech/articles/help-me-make-the-bgp-labs-even-better-114308.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/bgp-labs-further-reading/>)

Published: 2026-11-03T07:24:00Z

Content type: opinion

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [BGP](<https://devfeed.tech/topics/bgp.md>), [Documentation](<https://devfeed.tech/topics/documentation.md>), [Claude](<https://devfeed.tech/topics/claude.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [basics](<https://devfeed.tech/tags/basics.md>), [bgp](<https://devfeed.tech/tags/bgp.md>), [blog-posts](<https://devfeed.tech/tags/blog-posts.md>), [claude](<https://devfeed.tech/tags/claude.md>), [diversity](<https://devfeed.tech/tags/diversity.md>), [documentation](<https://devfeed.tech/tags/documentation.md>), [labs](<https://devfeed.tech/tags/labs.md>), [links](<https://devfeed.tech/tags/links.md>), [reading](<https://devfeed.tech/tags/reading.md>)

### AI overview

The author is adding "Further Reading" sections to BGP lab exercises and asks readers to contribute relevant vendor documentation and blog links through pull requests or issues. Claude found related blog posts readily, but precise vendor documentation links were harder to identify: many vendor docs use changeable auto-generated anchors and bury practical configuration details, such as BGP neighbor commands, in lengthy explanations. The author also wants more varied entry-level BGP resources. Readers can edit the relevant lab's Further Reading section via its GitHub page and submit a PR. The labs are free and open source, with contributor recognition but no budget for rewards.

### Source excerpt

I decided to add "Further Reading" sections to BGP lab exercises, containing links to vendor documentation and useful related blog posts. I naively expected to offload the job to Claude, commit the results, and move on. The "related blog posts" were a piece of cake; precise links to relevant vendor documentation turned out to be more of a challenge. TL&DR: I would love to get your suggestions for further reading as PRs in the BGP Labs repo. Apart from FRRouting, the vendor documentation is mostly generated from whatever internal system and uses auto-generated anchors that can change at any moment - somewhat "suboptimal" for what I wanted to do. Read more ...

## netlab: Testing Network Protocol Implementations

DevFeed: [netlab: Testing Network Protocol Implementations](<https://devfeed.tech/articles/netlab-testing-network-protocol-implementations-112470.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/11/netlab-device-test-harness/>)

Published: 2026-11-02T07:18:00Z

Content type: tutorial

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Protocol (disambiguation)](<https://devfeed.tech/topics/protocol.md>), [BGP](<https://devfeed.tech/topics/bgp.md>), [developer setup](<https://devfeed.tech/topics/developer-setup.md>)

Tags: [bgp](<https://devfeed.tech/tags/bgp.md>), [cisco](<https://devfeed.tech/tags/cisco.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [container](<https://devfeed.tech/tags/container.md>), [containers](<https://devfeed.tech/tags/containers.md>), [eigrp](<https://devfeed.tech/tags/eigrp.md>), [implementation](<https://devfeed.tech/tags/implementation.md>), [infrastructure](<https://devfeed.tech/tags/infrastructure.md>), [interoperability](<https://devfeed.tech/tags/interoperability.md>), [ios](<https://devfeed.tech/tags/ios.md>), [ios-xe](<https://devfeed.tech/tags/ios-xe.md>), [lab](<https://devfeed.tech/tags/lab.md>), [labs](<https://devfeed.tech/tags/labs.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [network-device](<https://devfeed.tech/tags/network-device.md>), [repository](<https://devfeed.tech/tags/repository.md>), [server](<https://devfeed.tech/tags/server.md>), [source-code](<https://devfeed.tech/tags/source-code.md>), [test](<https://devfeed.tech/tags/test.md>), [testing](<https://devfeed.tech/tags/testing.md>)

### AI overview

The excerpt reports that netlab worked for testing OpenEIGRP-Cisco IOS interoperability and gives setup guidance for similar protocol tests. It recommends container labs via the `clab` provider for faster startup than virtual machines; IOL is suggested for IOS/XE, with IOLL2 faster but not guaranteed to support all features. For Nexus OS, it suggests obtaining the latest registered download and using vrnetlab to make a container. Labs can use one topology per directory or multiple topology files, with filenames specified to `netlab create` or `netlab up` in the latter case; defaults can be project-wide. The author recommends putting FRR settings in defaults and using wildcard groups to assign device types. Netlab's EIGRP support is described as minimal and potentially insufficient, while it can handle other configuration such as addressing, OSPF, BGP, and static routes. Custom Jinja2 templates are suggested for EIGRP configuration, with possible later work toward generic support or OpenEIGRP integration.

### Source excerpt

Donnie Savage decided to use netlab to test OpenEIGRP-Cisco IOS interoperability (TL&DR: it works and the source code is in Donnie's EIGRP repository). He asked me for a few hints before setting up his test server. This is what I sent him; you might find it useful if you ever decide to use netlab to test a new network device/protocol implementation. Read more ...

## Nexus OS Fails to Send Syslog Records to a Silent Host

DevFeed: [Nexus OS Fails to Send Syslog Records to a Silent Host](<https://devfeed.tech/articles/nexus-os-fails-to-send-syslog-records-to-a-silent-host-102657.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/nexus-os-logging-silent-host/>)

Published: 2026-10-27T10:02:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Logging](<https://devfeed.tech/topics/logging.md>), [Network Configuration](<https://devfeed.tech/topics/network-configuration.md>)

Tags: [arp](<https://devfeed.tech/tags/arp.md>), [cache](<https://devfeed.tech/tags/cache.md>), [capture](<https://devfeed.tech/tags/capture.md>), [cisco](<https://devfeed.tech/tags/cisco.md>), [cisco-nexus](<https://devfeed.tech/tags/cisco-nexus.md>), [command](<https://devfeed.tech/tags/command.md>), [container](<https://devfeed.tech/tags/container.md>), [functionality](<https://devfeed.tech/tags/functionality.md>), [integration](<https://devfeed.tech/tags/integration.md>), [messages](<https://devfeed.tech/tags/messages.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [nexus](<https://devfeed.tech/tags/nexus.md>), [os](<https://devfeed.tech/tags/os.md>), [running](<https://devfeed.tech/tags/running.md>), [send](<https://devfeed.tech/tags/send.md>), [setup](<https://devfeed.tech/tags/setup.md>), [syslog](<https://devfeed.tech/tags/syslog.md>), [tests](<https://devfeed.tech/tags/tests.md>), [version](<https://devfeed.tech/tags/version.md>), [vm](<https://devfeed.tech/tags/vm.md>)

### AI overview

In a test with Cisco Nexus OS 10.6(2), syslog messages to a directly connected host were not sent while the switch's ARP cache was empty, even though the route and syslog configuration appeared valid. Pinging the host populated ARP, but the capture showed only ARP and ICMP traffic. After another configuration action generated a log entry, Nexus sent two buffered UDP syslog records; their timestamps show the first had been generated about nine minutes earlier. The observed behavior suggests Nexus buffers unsent messages but does not initiate the ARP resolution needed to deliver them to a silent host. The excerpt does not establish whether this occurs in other versions or setups.

### Source excerpt

Here's another you can't make this up SNAFU observation I made when running integration tests for netlab Syslog functionality: Cisco Nexus OS cannot send Syslog messages to a directly connected silent host. The setup is as trivial as it can get: a Cisco Nexus OS VM (running version 10.6(2)) connected to a dnsmasq container running rsyslogd. Read more ...

## Using External Tools in BGP Labs

DevFeed: [Using External Tools in BGP Labs](<https://devfeed.tech/articles/using-external-tools-in-bgp-labs-95139.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/bgp-labs-external-tools/>)

Published: 2026-10-22T07:51:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [BGP](<https://devfeed.tech/topics/bgp.md>), [Tool](<https://devfeed.tech/topics/tool.md>)

Tags: [bgp](<https://devfeed.tech/tags/bgp.md>), [codespaces](<https://devfeed.tech/tags/codespaces.md>), [external](<https://devfeed.tech/tags/external.md>), [labs](<https://devfeed.tech/tags/labs.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [tools](<https://devfeed.tech/tags/tools.md>)

### AI overview

The document explains how to start external tools, including network-xray, in open-source BGP configuration labs without changing the lab topology. It also describes how this works in GitHub Codespaces and says lab instructions now point readers to an optional tool setup step.

### Source excerpt

After Kazuya Takahashi released his wonderful network-xray tool and added it as an external tool to the open-source BGP configuration labs, I wrote a short document explaining how to start external tools in your BGP labs without changing the lab topology, and how it works in GitHub Codespaces (hint: wonderfully). I also modified all lab instructions to include a pointer to the optional tool-setup step. Happy labbing ;)

## Crappy Configuration Errors: Cisco Nexus OS Edition

DevFeed: [Crappy Configuration Errors: Cisco Nexus OS Edition](<https://devfeed.tech/articles/crappy-configuration-errors-cisco-nexus-os-edition-92449.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/crappy-error-reporting-nexus-os/>)

Published: 2026-10-21T05:33:00Z

Content type: opinion

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Cisco](<https://devfeed.tech/topics/cisco.md>), [configuration](<https://devfeed.tech/topics/configuration.md>), [Error Handling](<https://devfeed.tech/topics/error-handling.md>)

Tags: [automation](<https://devfeed.tech/tags/automation.md>), [cisco](<https://devfeed.tech/tags/cisco.md>), [cisco-nexus](<https://devfeed.tech/tags/cisco-nexus.md>), [code](<https://devfeed.tech/tags/code.md>), [commands](<https://devfeed.tech/tags/commands.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [consistency](<https://devfeed.tech/tags/consistency.md>), [error-messages](<https://devfeed.tech/tags/error-messages.md>), [errors](<https://devfeed.tech/tags/errors.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [exception](<https://devfeed.tech/tags/exception.md>), [expression](<https://devfeed.tech/tags/expression.md>), [integration](<https://devfeed.tech/tags/integration.md>), [interface](<https://devfeed.tech/tags/interface.md>), [is-is](<https://devfeed.tech/tags/is-is.md>), [mtu](<https://devfeed.tech/tags/mtu.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [operating-system](<https://devfeed.tech/tags/operating-system.md>), [os](<https://devfeed.tech/tags/os.md>), [port](<https://devfeed.tech/tags/port.md>), [programmers](<https://devfeed.tech/tags/programmers.md>)

### AI overview

While configuring Cisco Nexus OS with Netmiko, the author found that configuration errors do not follow one consistent format. Most observed errors began with `%`, but an IS-IS loopback message began `%INFO` and was informational; another MTU error began `ERROR:` without a percent sign and appeared only when the port lacked an underlying VM NIC; and an invalid-interface error omitted `%` while still reporting `Invalid`. The resulting netlab detection pattern excludes `%INFO` messages and also matches `invalid` or `error` case-insensitively: `^%(?!INFO).*` and `(?i:invalid|error).*`. The excerpt says integration tests missed the MTU case because they used connected interfaces.

### Source excerpt

TL&DR: Programmers writing Cisco Nexus OS code should have known better. They didn't (care?). One can understand that an operating system written in the late 1980s generates crappy suboptimal error messages, even though it was known even in those days how to do things right. Is it too much to hope that the programmers writing newer operating systems (like Cisco Nexus OS) would be better? Obviously, it is 🤦♂ Read more ...

## Nerd Fun: The DNS Museum

DevFeed: [Nerd Fun: The DNS Museum](<https://devfeed.tech/articles/nerd-fun-the-dns-museum-88403.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/worth-reading-dns-museum/>)

Published: 2026-10-16T06:13:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Domain Name System (DNS)](<https://devfeed.tech/topics/dns-resolution-process.md>), [self-hosted databases vs managed services](<https://devfeed.tech/topics/self-hosted-databases-vs-managed-services.md>)

Tags: [database](<https://devfeed.tech/tags/database.md>), [dns](<https://devfeed.tech/tags/dns.md>), [fun](<https://devfeed.tech/tags/fun.md>), [key-value-store](<https://devfeed.tech/tags/key-value-store.md>), [worth-reading](<https://devfeed.tech/tags/worth-reading.md>)

### AI overview

The DNS Museum documents unusual uses of DNS, described as a widely distributed key-value store, and includes a podcast episode about using DNS for configuration management.

### Source excerpt

The DNS Museum documents tons of crazy uses of DNS, the world's most distributed database (OK, a key-value store), including a "DNS for configuration management" podcast episode with Corey Quinn. Have fun!

## Netmiko vs Ansible: Executing Scripts

DevFeed: [Netmiko vs Ansible: Executing Scripts](<https://devfeed.tech/articles/netmiko-vs-ansible-executing-scripts-87557.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/netmiko-ansible-script-performance/>)

Published: 2026-10-15T05:52:00Z

Content type: comparison

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Ansible](<https://devfeed.tech/topics/ansible.md>), [Continuous Delivery (CD)](<https://devfeed.tech/topics/continuous-delivery.md>)

Tags: [ansible](<https://devfeed.tech/tags/ansible.md>), [frrouting](<https://devfeed.tech/tags/frrouting.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [network](<https://devfeed.tech/tags/network.md>), [virtual-machines](<https://devfeed.tech/tags/virtual-machines.md>), [vs](<https://devfeed.tech/tags/vs.md>)

### AI overview

The article compares Ansible and Netmiko for deploying configuration scripts to FRRouting virtual machines. In an EVPN lab, Netmiko performed the task faster; the article says the Ansible approach remained five times slower.

### Source excerpt

My initial "configuring Arista cEOS with Netmiko or Ansible" test was a bit biased. netlab generates the final configuration snippets in both cases (due to Ansible FUBARs we had to deal with), but then Netmiko just sends the configuration commands to the switch (after entering configuration mode), while the Ansible eos_config module executes show running, identifies the difference, and sends only the changes to the device. While that use case is highly relevant (after all, we're configuring network devices ;) I really should have done an apples-to-apples comparison, and FRRouting virtual machines are the ideal playground. Read more ...

## Configuring SRv6 Layer-3 Services on Junos

DevFeed: [Configuring SRv6 Layer-3 Services on Junos](<https://devfeed.tech/articles/configuring-srv6-layer-3-services-on-junos-86570.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/junos-srv6-layer3-services/>)

Published: 2026-10-14T06:15:00Z

Content type: tutorial

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Segment Routing over IPv6 (SRv6)](<https://devfeed.tech/topics/segment-routing-over-ipv6-srv6.md>), [IS-IS](<https://devfeed.tech/topics/is-is.md>), [CI/CD](<https://devfeed.tech/topics/cicd.md>)

Tags: [github](<https://devfeed.tech/tags/github.md>), [go](<https://devfeed.tech/tags/go.md>), [ipv4](<https://devfeed.tech/tags/ipv4.md>), [ipv6](<https://devfeed.tech/tags/ipv6.md>), [is-is](<https://devfeed.tech/tags/is-is.md>), [srv6](<https://devfeed.tech/tags/srv6.md>), [traffic](<https://devfeed.tech/tags/traffic.md>)

### AI overview

The article explains how to configure SRv6 layer-3 services on Junos, including IPv4 over IPv6 iBGP, extended nexthop capability, SRv6 prefix SIDs, and a route-map workaround for unusable IPv4 next hops. It also describes generating Junos configurations with netlab.

### Source excerpt

Now that we know what we need to make layer-3 services (BGP-free core transporting IPv4 and IPv6 traffic) work with SRv6, let's go through the steps needed to configure them on Junos, continuing from the baseline SRv6 with IS-IS configuration (and again relying on the excellent SRv6 Micro-SID (uSID) Basics article1 by Krzysztof Szarkowicz). In the BGP-Free Network Core with SRv6, we identified the components we need (assuming IBGP+IGP design): Read more ...

## Crazy Delay: IOS XR OSPFv2 Default Route Origination

DevFeed: [Crazy Delay: IOS XR OSPFv2 Default Route Origination](<https://devfeed.tech/articles/crazy-delay-ios-xr-ospfv2-default-route-origination-85788.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/iosxr-ospf-default/>)

Published: 2026-10-13T06:41:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Segment Routing with MPLS Labels (SR-MPLS)](<https://devfeed.tech/topics/segment-routing-with-mpls-labels-sr-mpls.md>), [Routing Security](<https://devfeed.tech/topics/routing-security.md>), [CI/CD](<https://devfeed.tech/topics/cicd.md>), [control-plane](<https://devfeed.tech/topics/control-plane.md>)

Tags: [cisco](<https://devfeed.tech/tags/cisco.md>), [control](<https://devfeed.tech/tags/control.md>), [control-plane](<https://devfeed.tech/tags/control-plane.md>), [deployment](<https://devfeed.tech/tags/deployment.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [network](<https://devfeed.tech/tags/network.md>), [ospf](<https://devfeed.tech/tags/ospf.md>)

### AI overview

Cisco IOS XR takes nearly 90 seconds after reboot to originate an OSPFv2 default route, exceeding netlab's 30-second integration-test wait. OSPFv3 does not show the same delay. The article includes relevant logs and configuration and asks readers for ideas to reduce the delay.

### Source excerpt

I decided to make Netmiko the default configuration deployment method netlab uses for Cisco IOS XR. It works great, and I don't have to worry about whether the user runs IOS XRd control-plane (in which case scripts work) or vRouter (in which case there's a VM inside the container, so no luck). After fixing the initial glitches (more on that another time), all integration tests passed except the OSPFv2 default origination test. It turns out the default waiting time (30 seconds) is way too low; Cisco IOS XR needs almost 90 seconds (after its reboot completes) to originate the OSPFv2 default route. Read more ...

## Sample netlab SRv6 Lab Topologies

DevFeed: [Sample netlab SRv6 Lab Topologies](<https://devfeed.tech/articles/sample-netlab-srv6-lab-topologies-85151.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/srv6-examples/>)

Published: 2026-10-12T05:37:00Z

Content type: tutorial

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Segment Routing over IPv6 (SRv6)](<https://devfeed.tech/topics/segment-routing-over-ipv6-srv6.md>), [IS-IS](<https://devfeed.tech/topics/is-is.md>)

Tags: [ipv6](<https://devfeed.tech/tags/ipv6.md>), [is-is](<https://devfeed.tech/tags/is-is.md>), [lab](<https://devfeed.tech/tags/lab.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [srv6](<https://devfeed.tech/tags/srv6.md>)

### AI overview

The article introduces sample netlab topologies for exploring SRv6 implementations, including scenarios using IS-IS, IPv4 islands, BGP-free cores and IPv4 L3VPNs over an SRv6-enabled IPv6 core.

### Source excerpt

With the growing number of SRv6 implementations that netlab supports, it made sense to create a set of topologies to help you get started exploring the SRv6 world. The sample topologies include: SRv6 with IS-IS including LLA-only core links Multivendor SRv6 IPv4 Islands over SRv6-Enabled IPv6 Core IPv6 BGP-Free Core with SRv6 IPv4 L3VPN over SRv6-Enabled IPv6 Core Read the getting started document and have fun exploring the scenarios 😎

## Netmiko vs Ansible: Does It Matter?

DevFeed: [Netmiko vs Ansible: Does It Matter?](<https://devfeed.tech/articles/netmiko-vs-ansible-does-it-matter-83878.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/netmiko-ansible-performance/>)

Published: 2026-10-09T06:10:00Z

Content type: comparison

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Ansible](<https://devfeed.tech/topics/ansible.md>), [CI/CD](<https://devfeed.tech/topics/cicd.md>)

Tags: [ansible](<https://devfeed.tech/tags/ansible.md>), [ansible-configuration](<https://devfeed.tech/tags/ansible-configuration.md>), [bgp](<https://devfeed.tech/tags/bgp.md>), [containers](<https://devfeed.tech/tags/containers.md>), [evpn](<https://devfeed.tech/tags/evpn.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [ospf](<https://devfeed.tech/tags/ospf.md>), [routing](<https://devfeed.tech/tags/routing.md>), [ssh](<https://devfeed.tech/tags/ssh.md>)

### AI overview

The author compares device configuration times for Netmiko, Ansible, and bash scripts in an EVPN lab. The reported difference between Netmiko and Ansible is significant, though less consequential when using virtual machines because they start more slowly than containers. The author prefers SSH-based configuration for its performance and use across virtual machines and containers.

### Source excerpt

We launched device configuration with Netmiko in the September 2026 netlab release and made it easier to use in the October 2026 release. It will become the default configuration method for several popular platforms (Arista EOS, Cisco IOS, Cisco Nexus OS, Cisco IOS XR, FRRouting virtual machines) in a few months, but before doing that, I wanted to check whether the change matters. TL&DR: Yes, it does. Read more ...

## BGP-Free Network Core with SRv6

DevFeed: [BGP-Free Network Core with SRv6](<https://devfeed.tech/articles/bgp-free-network-core-with-srv6-66530.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/srv6-bgp-free-core/>)

Published: 2026-10-07T05:27:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [BGP](<https://devfeed.tech/topics/bgp.md>), [Segment Routing over IPv6 (SRv6)](<https://devfeed.tech/topics/segment-routing-over-ipv6-srv6.md>), [IP routing](<https://devfeed.tech/topics/ip-routing.md>), [Network](<https://devfeed.tech/topics/network.md>)

Tags: [bgp](<https://devfeed.tech/tags/bgp.md>), [ipv6](<https://devfeed.tech/tags/ipv6.md>), [mpls](<https://devfeed.tech/tags/mpls.md>), [network](<https://devfeed.tech/tags/network.md>), [srv6](<https://devfeed.tech/tags/srv6.md>)

### AI overview

The article explains how SRv6 supports a BGP-free network core, where edge routers exchange BGP routes while core routers forward traffic without carrying customer routes. It describes IPv6 transport, extended next hops, and the SRv6 Prefix-SID information used to carry customer IPv4 or IPv6 packets through the core.

### Source excerpt

The concept of a BGP-free core is decades old: The network core routers (P routers in MPLS terminology) do not carry BGP routes; BGP routes are exchanged solely between network edge routers. The core routers thus cannot use the customer IP addresses in the packet forwarding process. The edge routers (PE routers in MPLS terminology) know how to reach BGP next hops using an encapsulation mechanism that makes IP packets opaque to the network core. Interestingly, the concept predates Cisco's Tag Switching (later MPLS) by at least a decade; that's how all ATM and Frame Relay networks worked (with ATM VPI/VCI or Frame Relay DLCI used as the in-network addresses). Read more ...

## Cisco IOS CLI Errors and Warnings Are Difficult to Distinguish

DevFeed: [Cisco IOS CLI Errors and Warnings Are Difficult to Distinguish](<https://devfeed.tech/articles/the-crappy-cisco-ios-cli-error-reporting-65319.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/crappy-cisco-ios-cli-error-reporting/>)

Published: 2026-10-06T05:23:00Z

Content type: article

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Error Handling](<https://devfeed.tech/topics/error-handling.md>), [cisco networking](<https://devfeed.tech/topics/cisco-networking.md>), [Error Propagation](<https://devfeed.tech/topics/error-propagation.md>)

Tags: [automation](<https://devfeed.tech/tags/automation.md>), [cisco](<https://devfeed.tech/tags/cisco.md>), [error-reporting](<https://devfeed.tech/tags/error-reporting.md>), [integration-test](<https://devfeed.tech/tags/integration-test.md>), [network](<https://devfeed.tech/tags/network.md>)

### AI overview

Cisco IOS configuration errors and warnings both begin with a percent sign, making them difficult to distinguish when configuring network devices through Netmiko. Attempts to detect errors with regular expressions can misclassify warnings or fail across supported Python versions, while Cisco IOS CLI messages were not designed for nonhuman consumers.

### Source excerpt

TL&DR: It's really hard to figure out when a Cisco IOS box configured via its CLI reports a configuration error. One of the drawbacks of using Netmiko to configure network devices is its inherent lack of error detection - while it can switch into configuration mode and exit it (including a commit operation if needed), it doesn't detect configuration errors. No big deal (I thought); the configuration error messages generated by Cisco IOS always start with a percent sign (%), so I'd just use that as the error_pattern parameter of the send_config_from_file command. A few integration test failures later, that turned out to be a bad idea; Cisco IOS starts errors and warnings with the percentage sign, and there's absolutely no reliable way to differentiate between the two. Read more ...

## netlab 26.10: SRv6, More Netmiko

DevFeed: [netlab 26.10: SRv6, More Netmiko](<https://devfeed.tech/articles/netlab-26-10-srv6-more-netmiko-64738.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/netlab-26-10/>)

Published: 2026-10-05T05:53:00Z

Content type: release

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Segment Routing over IPv6 (SRv6)](<https://devfeed.tech/topics/segment-routing-over-ipv6-srv6.md>), [VXLAN](<https://devfeed.tech/topics/vxlan.md>)

Tags: [frrouting](<https://devfeed.tech/tags/frrouting.md>), [ios](<https://devfeed.tech/tags/ios.md>), [ipv4](<https://devfeed.tech/tags/ipv4.md>), [is-is](<https://devfeed.tech/tags/is-is.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [nokia](<https://devfeed.tech/tags/nokia.md>), [srv6](<https://devfeed.tech/tags/srv6.md>)

### AI overview

netlab 26.10 adds SRv6 implementations for Junos, Nokia SR Linux, FRRouting, and Cisco IOS XR, along with other network lab features. It also adds a netmiko install command for the packages needed for Netmiko-based device configuration.

### Source excerpt

netlab release 26.10 adds new SRv6 implementations and features: Full SRv6 support (IS-IS, layer-3 services, L3VPN) on Junos SRv6 with IS-IS and SRv6 layer-3 services on Nokia SR Linux IPv4 layer-3 services with SRv6 locators exchanged over EBGP on FRRouting and Cisco IOS XR Other new features include: Generic prefix sets for static routes containerlab nodes can start in batches or wait for other nodes to start. netlab install netmiko installs the Netmiko and Paramiko packages needed for Netmiko-based device configuration and helps you change the device configuration mode for supported devices. Read more ...

## Worth Reading: Don't Fight the Users' Desire Paths

DevFeed: [Worth Reading: Don't Fight the Users' Desire Paths](<https://devfeed.tech/articles/worth-reading-don-t-fight-the-users-desire-paths-63734.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/10/worth-reading-desire-paths/>)

Published: 2026-10-02T05:38:00Z

Content type: opinion

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Developer experience](<https://devfeed.tech/topics/developer-experience.md>)

Tags: [worth-reading](<https://devfeed.tech/tags/worth-reading.md>)

### AI overview

The author highlights Chris Siebenmann's application of desire paths to IT: guide users gently toward preferred practices or help them work in their preferred way with less harm.

### Source excerpt

Chris Siebenmann publishes articles written from an interesting perspective: he's a Unix herder at a university (based on my ancient, similar experience, that's usually worse than herding cats). In one of his recent articles, he applied the desire paths ideas to IT: don't fight how people are doing things; either kindly nudge them in the right direction, or help them get stuff done the way they like to get it done, but in the least harmful way. I could definitely use some of his wisdom decades ago 🤷🏻♂.

## Configuring SRv6 on Junos (Locator and IGP)

DevFeed: [Configuring SRv6 on Junos (Locator and IGP)](<https://devfeed.tech/articles/configuring-srv6-on-junos-locator-and-igp-62334.md>)

Original publisher: [Read original article](<https://blog.ipspace.net/2026/09/srv6-junos/>)

Published: 2026-09-30T06:14:00Z

Content type: tutorial

Language: en

Sources: [ipSpace](<https://devfeed.tech/sources/ipspace-net-blog-2.md>)

Topics: [Segment Routing over IPv6 (SRv6)](<https://devfeed.tech/topics/segment-routing-over-ipv6-srv6.md>)

Tags: [configuration](<https://devfeed.tech/tags/configuration.md>), [ipv6](<https://devfeed.tech/tags/ipv6.md>), [is-is](<https://devfeed.tech/tags/is-is.md>), [netlab](<https://devfeed.tech/tags/netlab.md>), [srv6](<https://devfeed.tech/tags/srv6.md>)

### AI overview

The article describes adding Junos SRv6 support to netlab using micro-SIDs and locator configuration. The author reports that the tested setup worked without explicit SRv6 block configuration, while acknowledging possible omissions. It also explains why configuring the locator in IS-IS is necessary to advertise the locator prefix and enable forwarding of SRv6-encapsulated packets.

### Source excerpt

I wanted to make my SRv6 lab examples usable with more platforms. Adding netlab Junos SRv6 support (included in the 26.10 release) was relatively easy; here's what I learned while working on the pull request: Read more ...

[Next page](<https://devfeed.tech/sources/ipspace-net-blog-2.md?cursor=WyIyMDI2LTA5LTMwVDA2OjE0OjAwKzAwOjAwIiwgImIzNjIxMjM5LTlhNjgtNDYyOS05OThmLWJiM2FiNTIwYzk1ZiJd>)