# m5stack

Published articles for m5stack.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## M5Stack Module13.2 LoRa-1262 expansion board integrates 14x10 mm Stamp LoRa-1262 module

DevFeed: [M5Stack Module13.2 LoRa-1262 expansion board integrates 14x10 mm Stamp LoRa-1262 module](<https://devfeed.tech/articles/m5stack-module13-2-lora-1262-expansion-board-integrates-14-10-mm-stamp-lora-1262-module-14042.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/13/m5stack-module13-2-lora-1262-expansion-board-integrates-14x10-mm-stamp-lora-1262-module/>)

Author: Debashis Das

Published: 2026-09-13T05:02:54Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [lora](<https://devfeed.tech/topics/lora.md>), [systems](<https://devfeed.tech/topics/systems.md>)

Tags: [connectivity](<https://devfeed.tech/tags/connectivity.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [io](<https://devfeed.tech/tags/io.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lora](<https://devfeed.tech/tags/lora.md>), [lorawan](<https://devfeed.tech/tags/lorawan.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [lpwan](<https://devfeed.tech/tags/lpwan.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [module](<https://devfeed.tech/tags/module.md>), [news](<https://devfeed.tech/tags/news.md>), [power-management](<https://devfeed.tech/tags/power-management.md>), [routing](<https://devfeed.tech/tags/routing.md>), [series](<https://devfeed.tech/tags/series.md>), [smart-agriculture](<https://devfeed.tech/tags/smart-agriculture.md>), [smart-city](<https://devfeed.tech/tags/smart-city.md>), [spi](<https://devfeed.tech/tags/spi.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

M5Stack has launched the Stamp LoRa-1262 SMD module and the stackable Module13.2 LoRa-1262 expansion board for M5Stack Core controllers. Based on the Semtech SX1262, the module supports several modulation modes across 868-923 MHz, with up to +22 dBm transmit power and -147 dBm receive sensitivity. Module13.2 adds an RP-SMA antenna interface, M5IOE1 I/O expansion, configurable pin routing, and selectable I2C addresses for multi-module stacking.

### Source excerpt

After launching the SX1262-based M5Stamp C6LoRa tiny module, M5Stack has launched two SX1262-based LoRa add-ons for the 868-923 MHz band: the tiny Stamp LoRa-1262 SMD module for custom PCBs, and the stackable Module13.2 LoRa-1262 module for the M5Stack Core series. The Stamp LoRa-1262 supports LoRa, FSK, GFSK, MSK, GMSK, and OOK modulation, with up to +22 dBm transmit power and -147 dBm receive sensitivity. The Module13.2 adds an RP-SMA antenna interface, an M5IOE1 IO expansion chip for reset and power management, and DIP switches for flexible pin routing and configurable I2C addresses, enabling multi-module stacking. Stamp LoRa-1262 SMD module M5Stack Stamp LoRa-1262 specifications: LoRa Transceiver - Semtech SX1262 Wireless Connectivity (LoRa) Frequency Band - 868 to 923 MHz Modulation Modes - LoRa, FSK, GFSK, MSK, GMSK, OOK Bitrate - Up to 300 kbps (programmable) Transmit power (Tx) - Up to +22 dBm Receive sensitivity (Rx) - Down to -147 dBm [...] The post M5Stack Module13.2 LoRa-1262 expansion board integrates 14x10 mm Stamp LoRa-1262 module appeared first on CNX Software - Embedded Systems News.

## ESP-BSP Generator helps create custom-board BSP components from Espressif development kits

DevFeed: [ESP-BSP Generator helps create custom-board BSP components from Espressif development kits](<https://devfeed.tech/articles/esp-bsp-generator-from-espressif-dev-kit-to-your-custom-board-in-an-afternoon-13775.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/06/bsp-generator-promo/>)

Author: John Lee

Published: 2026-06-30T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Web](<https://devfeed.tech/topics/web.md>), [Development](<https://devfeed.tech/topics/development.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>)

Tags: [apis](<https://devfeed.tech/tags/apis.md>), [blog](<https://devfeed.tech/tags/blog.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [dependency](<https://devfeed.tech/tags/dependency.md>), [devkit](<https://devfeed.tech/tags/devkit.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [esp-bsp](<https://devfeed.tech/tags/esp-bsp.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [web](<https://devfeed.tech/tags/web.md>)

### AI overview

The ESP-BSP Generator is a web tool that helps developers create an ESP-IDF BSP component for a custom board. Users can start from an esp-bsp development kit, customize hardware details such as pins and features, and download a reusable BSP component.

### Source excerpt

Start from an esp-bsp dev kit, customize pins and features in a web form, and download a production-style BSP component for your custom PCB - same APIs, less manual work.

## Developing a Zephyr IoT app with AI

DevFeed: [Developing a Zephyr IoT app with AI](<https://devfeed.tech/articles/developing-a-zephyr-iot-app-with-ai-13779.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/06/zephyr-coding-with-ai/>)

Author: John Lee

Published: 2026-06-15T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [AI Agent](<https://devfeed.tech/topics/ai-agent.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [cursor](<https://devfeed.tech/topics/cursor.md>), [Testing](<https://devfeed.tech/topics/testing.md>), [C](<https://devfeed.tech/topics/c.md>), [Git](<https://devfeed.tech/topics/git.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [real-time](<https://devfeed.tech/topics/real-time.md>)

Tags: [agent](<https://devfeed.tech/tags/agent.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-agent](<https://devfeed.tech/tags/ai-agent.md>), [blog](<https://devfeed.tech/tags/blog.md>), [code](<https://devfeed.tech/tags/code.md>), [coding](<https://devfeed.tech/tags/coding.md>), [cursor](<https://devfeed.tech/tags/cursor.md>), [development](<https://devfeed.tech/tags/development.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [esp](<https://devfeed.tech/tags/esp.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [experiment](<https://devfeed.tech/tags/experiment.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [git](<https://devfeed.tech/tags/git.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [iot](<https://devfeed.tech/tags/iot.md>), [llm](<https://devfeed.tech/tags/llm.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [testing](<https://devfeed.tech/tags/testing.md>), [workflow](<https://devfeed.tech/tags/workflow.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

This article describes applying an AI-agent workflow to develop a Zephyr-based IoT application on the ESP DualKey kit from M5Stack. It emphasizes specifications, project boundaries, Git discipline, testing, and bench validation while moving the implementation from ESP-IDF and Rust to Zephyr C.

### Source excerpt

Still on improving our AI-based, embedded software workflow, this article applies the same AI-agent discipline to Zephyr. Using the same ESP Dualkey kit from M5Stack, specs, integration rules, plan->execute->commit->test, reusable modules, journals, and Git - without redefining the product.

## Thread Network Credentials Sharing

DevFeed: [Thread Network Credentials Sharing](<https://devfeed.tech/articles/thread-network-credentials-sharing-13747.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/01/thread-credential-sharing/>)

Author: John Lee

Published: 2026-01-06T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Protocol (disambiguation)](<https://devfeed.tech/topics/protocol.md>), [interoperability](<https://devfeed.tech/topics/interoperability.md>), [Matter](<https://devfeed.tech/topics/matter.md>), [migration](<https://devfeed.tech/topics/migration.md>), [User Experience](<https://devfeed.tech/topics/user-experience.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [border-router](<https://devfeed.tech/tags/border-router.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [demo](<https://devfeed.tech/tags/demo.md>), [fragmentation](<https://devfeed.tech/tags/fragmentation.md>), [interoperability](<https://devfeed.tech/tags/interoperability.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [matter](<https://devfeed.tech/tags/matter.md>), [migration](<https://devfeed.tech/tags/migration.md>), [network](<https://devfeed.tech/tags/network.md>), [onboarding](<https://devfeed.tech/tags/onboarding.md>), [thread](<https://devfeed.tech/tags/thread.md>), [user-experience](<https://devfeed.tech/tags/user-experience.md>)

### AI overview

This article introduces Thread Credentials Sharing, a Thread 1.4 feature for securely sharing administrative access and network credentials with new Thread Border Routers and devices. It explains Operational Dataset credentials, deployment benefits, usage scenarios, and a demonstration using an M5Stack Thread Border Router and the SmartThings app.

### Source excerpt

This article introduces the Thread Credentials Sharing feature, explains why it is important, how it works, and provides a demo using M5Stack Thread Border Router and SmartThings app.

## Using ESP-BSP with DevKits

DevFeed: [Using ESP-BSP with DevKits](<https://devfeed.tech/articles/using-esp-bsp-with-devkits-13967.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/using-esp-bsp-with-devkits/>)

Author: John Lee

Published: 2024-09-27T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [Development](<https://devfeed.tech/topics/development.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Filesystems](<https://devfeed.tech/topics/filesystems.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [development](<https://devfeed.tech/tags/development.md>), [devkit](<https://devfeed.tech/tags/devkit.md>), [display](<https://devfeed.tech/tags/display.md>), [driver](<https://devfeed.tech/tags/driver.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c2](<https://devfeed.tech/tags/esp32-c2.md>), [esp32-s2](<https://devfeed.tech/tags/esp32-s2.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [examples](<https://devfeed.tech/tags/examples.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [led](<https://devfeed.tech/tags/led.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [spi](<https://devfeed.tech/tags/spi.md>), [spiffs](<https://devfeed.tech/tags/spiffs.md>)

### AI overview

This tutorial explains how to use Espressif's ESP-BSP with DevKits. It describes the Generic and DevKit BSP options, configurable buttons, LEDs, filesystems, displays, touch interfaces, and example projects.

### Source excerpt

Introduction# The BSP (Board Support Package) from Espressif is ready to use package for selected boards (usually for Espressif's and M5Stack boards). This package contains main initialization functions for features, which the board contains. For example display and touch initialization, file system initialization, audio if available, LEDs and buttons. This is the easy way, how to start developing with your board. Except initialization functions, there are examples for selected board too.

## How to switch between multiple ESP32 firmware binaries stored in the flash memory

DevFeed: [How to switch between multiple ESP32 firmware binaries stored in the flash memory](<https://devfeed.tech/articles/how-to-switch-between-multiple-esp32-firmware-binaries-stored-in-the-flash-memory-13963.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/switch-between-firmware-binaries/>)

Author: John Lee

Published: 2024-07-24T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Wokwi](<https://devfeed.tech/topics/wokwi.md>)

Tags: [binaries](<https://devfeed.tech/tags/binaries.md>), [blog](<https://devfeed.tech/tags/blog.md>), [boot](<https://devfeed.tech/tags/boot.md>), [bootloader](<https://devfeed.tech/tags/bootloader.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [build](<https://devfeed.tech/tags/build.md>), [code](<https://devfeed.tech/tags/code.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [flash](<https://devfeed.tech/tags/flash.md>), [gui](<https://devfeed.tech/tags/gui.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [iot](<https://devfeed.tech/tags/iot.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [memory](<https://devfeed.tech/tags/memory.md>), [ota](<https://devfeed.tech/tags/ota.md>), [partition](<https://devfeed.tech/tags/partition.md>), [quick-start](<https://devfeed.tech/tags/quick-start.md>), [releases](<https://devfeed.tech/tags/releases.md>), [simulation](<https://devfeed.tech/tags/simulation.md>), [wokwi](<https://devfeed.tech/tags/wokwi.md>)

### AI overview

A tutorial on using the ESP32 Graphical Bootloader to store multiple firmware images in flash memory and switch between them. It explains the bootloader flow, partition-table configuration, and steps for building, merging, flashing, and simulating the application.

### Source excerpt

Introduction# The ESP32 microcontroller is a versatile and powerful device, widely used in IoT and embedded applications. One of its advanced features is the ability to store multiple firmware images in its flash memory and switch between them. This capability can be leveraged for various purposes, such as testing different firmware versions, running multiple applications, or maintaining a backup firmware.

## Simplify Your Embedded Projects with ESP-BSP

DevFeed: [Simplify Your Embedded Projects with ESP-BSP](<https://devfeed.tech/articles/simplify-your-embedded-projects-with-esp-bsp-13959.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/simplify-embedded-projects-with-esp-bsp/>)

Author: John Lee

Published: 2024-06-18T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>), [Development](<https://devfeed.tech/topics/development.md>), [Framework](<https://devfeed.tech/topics/framework.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Toit](<https://devfeed.tech/topics/toit.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp-bsp](<https://devfeed.tech/tags/esp-bsp.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [flash](<https://devfeed.tech/tags/flash.md>), [framework](<https://devfeed.tech/tags/framework.md>), [getting-started](<https://devfeed.tech/tags/getting-started.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [programming](<https://devfeed.tech/tags/programming.md>), [usb](<https://devfeed.tech/tags/usb.md>), [web](<https://devfeed.tech/tags/web.md>), [web-browser](<https://devfeed.tech/tags/web-browser.md>)

### AI overview

This tutorial introduces ESP-BSP, a collection of board support packages for Espressif and M5Stack development boards. It explains how ESP-BSP simplifies hardware integration and provides standardized APIs, then demonstrates creating, configuring, building, and flashing an ESP32-S3-BOX-3 project with ESP-IDF.

### Source excerpt

Introduction# Are you a maker or an embedded systems enthusiast looking to create applications that work across different development boards with Espressif SoCs like ESP32 or ESP32-S3? Whether you're using the ESP-WROVER-KIT, M5Stack-CoreS3, ESP32-S3-BOX-3, or other compatible boards, the ESP Board Support Package (ESP-BSP) makes your life easier.

## AWS Launches the Reinventing Health Spaces IoT Contest

DevFeed: [AWS Launches the Reinventing Health Spaces IoT Contest](<https://devfeed.tech/articles/june-2021-13901.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/june-2021/>)

Author: John Lee

Published: 2021-07-21T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Amazon Web Services (AWS)](<https://devfeed.tech/topics/amazon-web-services-aws.md>), [AWS IoT Core](<https://devfeed.tech/topics/aws-iot-core.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [Cloud](<https://devfeed.tech/topics/cloud.md>), [Esp Rainmaker](<https://devfeed.tech/topics/esp-rainmaker.md>)

Tags: [amazon-web-services-aws](<https://devfeed.tech/tags/amazon-web-services-aws.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [aws-iot-core](<https://devfeed.tech/tags/aws-iot-core.md>), [blog](<https://devfeed.tech/tags/blog.md>), [esp-rainmaker](<https://devfeed.tech/tags/esp-rainmaker.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [iot](<https://devfeed.tech/tags/iot.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [newsletter](<https://devfeed.tech/tags/newsletter.md>), [open-source](<https://devfeed.tech/tags/open-source.md>)

### AI overview

Amazon Web Services launched the Reinventing Health Spaces IoT contest on Hackster.io. Developers are challenged to build an open-source healthy-spaces solution using M5Stack Core2 for AWS IoT EduKit reference hardware, AWS IoT Core, and at least one other cloud service.

### Source excerpt

Hi everyone, An exciting IoT contest has just been launched by Amazon Web Services (AWS) on hackster.io. It is entitled "Reinventing Health Spaces" and the challenge for developers across the world is to build an open-source, healthy-spaces solution using M5Stack Core2 for the AWS IoT EduKit reference hardware, AWS IoT Core, and at least one other cloud service. We, at Espressif, are particularly happy about this event, because the AWS IoT EduKit is based on ESP32.

## Espressif launches ESP-Hosted for ESP32 connectivity with Linux host controllers

DevFeed: [Espressif launches ESP-Hosted for ESP32 connectivity with Linux host controllers](<https://devfeed.tech/articles/june-2020-13900.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/june-2020/>)

Author: John Lee

Published: 2020-07-27T00:00:00Z

Content type: news

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [Wi-Fi](<https://devfeed.tech/topics/wi-fi.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [GitHub](<https://devfeed.tech/topics/github.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>)

Tags: [ble](<https://devfeed.tech/tags/ble.md>), [blog](<https://devfeed.tech/tags/blog.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [embedded-club](<https://devfeed.tech/tags/embedded-club.md>), [esp-hosted](<https://devfeed.tech/tags/esp-hosted.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [github](<https://devfeed.tech/tags/github.md>), [instagram](<https://devfeed.tech/tags/instagram.md>), [iot](<https://devfeed.tech/tags/iot.md>), [linux](<https://devfeed.tech/tags/linux.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [newsletter](<https://devfeed.tech/tags/newsletter.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>)

### AI overview

Espressif's June 2020 newsletter announces ESP-Hosted, a project that uses ESP32 as a communication processor to provide Wi-Fi and Bluetooth/BLE connectivity to Linux-based host controllers. The newsletter also highlights several ESP32 and ESP8266 projects.

### Source excerpt

Hi everyone, We've got some exciting news for you this month! In response to our customers' requests, we have just launched ESP-Hosted. This is a project which addresses our customers' requirement to use ESP32 as a connectivity module with Linux-based host controllers. More specifically, the ESP-Hosted project offers a way of using ESP32 as a communication processor that provides Wi-Fi and Bluetooth/BLE connectivity to the host MCU.