# MIPI

Published articles for MIPI.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards

DevFeed: [Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards](<https://devfeed.tech/articles/arduino-uno-media-carrier-adds-mipi-csi-dsi-and-audio-connectors-to-uno-q-and-ventuno-q-boards-14037.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/10/arduino-uno-media-carrier-adds-mipi-csi-dsi-and-audio-connectors-to-uno-q-and-ventuno-q-boards/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-09-10T00:00:32Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [UNO Q](<https://devfeed.tech/topics/uno-q.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [audio](<https://devfeed.tech/tags/audio.md>), [camera](<https://devfeed.tech/tags/camera.md>), [connectors](<https://devfeed.tech/tags/connectors.md>), [display](<https://devfeed.tech/tags/display.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [linux](<https://devfeed.tech/tags/linux.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [mipi-csi](<https://devfeed.tech/tags/mipi-csi.md>), [news](<https://devfeed.tech/tags/news.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [uno-q](<https://devfeed.tech/tags/uno-q.md>), [ventuno-q](<https://devfeed.tech/tags/ventuno-q.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

The Arduino UNO Media Carrier adds accessible 22-pin MIPI DSI and CSI connectors, three 3.5 mm audio jacks, and RGB LEDs to Arduino UNO Q and VENTUNO Q boards. It is listed at $19.25 or EUR 19.89 including VAT.

### Source excerpt

Arduino UNO Media Carrier board adds three audio jacks, a MIPI DSI display connector, two MIPI CSI camera connectors, and a few RGB LEDs to the Arduino UNO Q and Arduino VENTUNO Q SBCs. Both Arduino "Q" boards already expose MIPI CSI/DSI and audio interfaces, but only through the JMEDIA and JMISC 60-pin headers, which aren't very convenient. The Arduino UNO Media Carrier board fixes that with 22-pin MIPI connectors and 3.5 audio jacks. Arduino UNO Media Carrier (ASX00083) specifications: Compatible SBCs - Arduino UNO Q and Arduino VENTUNO Q Display I/F - 22-pin MIPI DSI connector compatible with standard MIPI-DSI display modules (5-inch, 8-inch, 10.1-inch Waveshare touch display compatible) Camera I/F - 2x 22-pin MIPI-CSI connectors compatible with IMX219 camera modules like the Raspberry Pi Camera Module 2 Audio 3.5 mm (MIC-IN/Headphones Out) audio jack 3.5mm Line Out audio jack 3.5mm Ear Out audio jack Host interfaces 60-pin female [...] The post Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards appeared first on CNX Software - Embedded Systems News.

## YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor

DevFeed: [YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor](<https://devfeed.tech/articles/yuzukineko-a-linux-capable-allwinner-f101-risc-v-sbc-with-raspberry-pi-pico-form-factor-14034.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/08/yuzukineko-a-linux-capable-allwinner-f101-64-bit-risc-v-sbc-with-raspberry-pi-pico-form-factor/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-09-07T17:01:57Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [SOC](<https://devfeed.tech/topics/soc.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [Kernel](<https://devfeed.tech/topics/kernel.md>), [Software](<https://devfeed.tech/topics/software.md>)

Tags: [allwinner](<https://devfeed.tech/tags/allwinner.md>), [allwinner-d-series](<https://devfeed.tech/tags/allwinner-d-series.md>), [buildroot](<https://devfeed.tech/tags/buildroot.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [linux](<https://devfeed.tech/tags/linux.md>), [linux-7-x](<https://devfeed.tech/tags/linux-7-x.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [psram](<https://devfeed.tech/tags/psram.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [spi](<https://devfeed.tech/tags/spi.md>), [storage](<https://devfeed.tech/tags/storage.md>), [usb](<https://devfeed.tech/tags/usb.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>), [zephyr-os](<https://devfeed.tech/tags/zephyr-os.md>)

### AI overview

YuzukiHD has introduced YuzukiNeko, a Raspberry Pi Pico-sized open-source single-board computer built around the Allwinner F101 RISC-V SoC. It includes a 1.008 GHz C907 core, 8MB or 16MB PSRAM, SPI NOR flash, microSD storage, USB-C, and GPIO expansion, with support for Linux, Buildroot, and Zephyr RTOS.

### Source excerpt

YuzukiHD has made another open-source hardware Linux SBC. YuzukiNeko is a Raspberry Pi Pico-sized single board computer powered by a new Allwinner F101 RISC-V SoC. The Allwinner F101 processor features a single 1.008 GHz C907 RISC-V core, 8MB or 16 MB PSRAM, and support for various display interfaces such as MIPI DSI, 24-bit RGB, and LVDS. The YuzukiNeko board itself features the F101 SoC, an SPI NOR flash, a microSD card for storage, a USB-C port, and two 20-pin GPIO headers. YuzukiNeko specifications: SoC - Allwinner F101 CPU - T-head C907 RISC-V core up to 1.008 GHz Memory - 8MB or 16MB PSRAM @ 252 MHz Package - QFN-68 Storage 128 Mbit NOR flash (PY25Q128HA-SUH-IT) MicroSD card slot USB - USB Type-C port for data, power, and programming Expansion 2x 20-pin expansion headers with GPIOs, ADC, 5V, 3.3V, and GND 5x pads with HP out (analog speaker output) and four [...] The post YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor appeared first on CNX Software - Embedded Systems News.

## ESPHome 2025.9.0: MIPI RGB displays and a camera JPEG encoder

DevFeed: [ESPHome 2025.9.0: MIPI RGB displays and a camera JPEG encoder](<https://devfeed.tech/articles/esphome-2025-9-0-mipi-rgb-displays-and-a-camera-jpeg-encoder-16701.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/09/17/esphome-2025-9/>)

Author: Jesse Hills

Published: 2025-09-17T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome - Smart Home Made Simple - Blog](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Compression](<https://devfeed.tech/topics/compression.md>), [dev-tools](<https://devfeed.tech/topics/dev-tools.md>), [Streaming](<https://devfeed.tech/topics/streaming.md>)

Tags: [2025](<https://devfeed.tech/tags/2025.md>), [camera](<https://devfeed.tech/tags/camera.md>), [compatibility](<https://devfeed.tech/tags/compatibility.md>), [compression](<https://devfeed.tech/tags/compression.md>), [developer-tools](<https://devfeed.tech/tags/developer-tools.md>), [dfu](<https://devfeed.tech/tags/dfu.md>), [display](<https://devfeed.tech/tags/display.md>), [firmware-update](<https://devfeed.tech/tags/firmware-update.md>), [improvements](<https://devfeed.tech/tags/improvements.md>), [jpeg](<https://devfeed.tech/tags/jpeg.md>), [memory](<https://devfeed.tech/tags/memory.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [releases](<https://devfeed.tech/tags/releases.md>), [rgb](<https://devfeed.tech/tags/rgb.md>)

### AI overview

ESPHome 2025.9.0 adds MIPI RGB display support, a camera JPEG encoder, nRF52 DFU support, ESPHome Builder improvements, memory optimizations, and enhanced sensor and component support.

### Source excerpt

ESPHome 2025.9.0 adds MIPI RGB display support, a camera JPEG encoder, DFU support for nRF52, and ESPHome Builder improvements, along with extensive memory optimizations.

## ESPHome 2025.8.0: nRF52 support and ESP-NOW mesh communication

DevFeed: [ESPHome 2025.8.0: nRF52 support and ESP-NOW mesh communication](<https://devfeed.tech/articles/esphome-2025-8-0-nrf52-support-and-esp-now-mesh-communication-16700.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/08/20/esphome-2025-8/>)

Author: Jesse Hills

Published: 2025-08-20T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome - Smart Home Made Simple - Blog](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [Microcontrollers](<https://devfeed.tech/topics/microcontrollers.md>), [Zephyr RTOS](<https://devfeed.tech/topics/zephyr-rtos.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>)

Tags: [2025](<https://devfeed.tech/tags/2025.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [introduction](<https://devfeed.tech/tags/introduction.md>), [latency](<https://devfeed.tech/tags/latency.md>), [low-latency](<https://devfeed.tech/tags/low-latency.md>), [memory-optimization](<https://devfeed.tech/tags/memory-optimization.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [optimization](<https://devfeed.tech/tags/optimization.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

ESPHome 2025.8.0 adds basic Nordic nRF52 support built on Zephyr, ESP-NOW device-to-device communication for ESP32 platforms, and MIPI DSI display support for ESP32-P4. It also introduces memory optimizations and requires Python 3.11 or newer.

### Source excerpt

ESPHome 2025.8.0 introduces the Nordic nRF52 platform built on Zephyr, ESP-NOW device-to-device communication, and MIPI DSI display support, and now requires Python 3.11 or newer.

## Espressif SoCs and LCD screens: trends and solutions

DevFeed: [Espressif SoCs and LCD screens: trends and solutions](<https://devfeed.tech/articles/espressif-socs-and-lcd-screens-trends-and-solutions-13870.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/espressif-socs-lcd-screens/>)

Author: John Lee

Published: 2024-09-30T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [human computer interaction](<https://devfeed.tech/topics/human-computer-interaction.md>), [real-time](<https://devfeed.tech/topics/real-time.md>), [Esp Rainmaker](<https://devfeed.tech/topics/esp-rainmaker.md>), [Matter](<https://devfeed.tech/topics/matter.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [display](<https://devfeed.tech/tags/display.md>), [ecosystem](<https://devfeed.tech/tags/ecosystem.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp-rainmaker](<https://devfeed.tech/tags/esp-rainmaker.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [interface](<https://devfeed.tech/tags/interface.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [re](<https://devfeed.tech/tags/re.md>), [real-time](<https://devfeed.tech/tags/real-time.md>), [rgb](<https://devfeed.tech/tags/rgb.md>)

### AI overview

This article examines Espressif SoCs that support different LCD driver interfaces for smart home, smart security, industrial, and other applications. It discusses requirements such as performance, low power consumption, compact design, user interaction, and wireless connectivity, along with Espressif development resources and the ESP-RainMaker platform.

### Source excerpt

In today's rapidly evolving IoT landscape, LCD screens have become indispensable components of smart devices, providing real-time information and facilitating user interaction. As the demand for higher performance, lower power consumption, and more compact designs grows, it is crucial to choose the right technology to drive LCD screens. This article explores a number of Espressif SoCs that support different LCD driver interfaces, suitable for smart home, smart security, and other applications.

## Vita HDMI Mod (Attempt)

DevFeed: [Vita HDMI Mod (Attempt)](<https://devfeed.tech/articles/vita-hdmi-mod-attempt-22353.md>)

Original publisher: [Read original article](<https://yifan.lu/2017/12/31/vita-hdmi-mod-attempt/>)

Author: yifanlu

Published: 2017-12-31T08:00:00Z

Content type: article

Language: en

Sources: [Yifan Lu](<https://devfeed.tech/sources/yifan-lu.md>)

Topics: [Hardware](<https://devfeed.tech/topics/hardware.md>), [hdmi](<https://devfeed.tech/topics/hdmi.md>), [SOC](<https://devfeed.tech/topics/soc.md>), [Development](<https://devfeed.tech/topics/development.md>)

Tags: [components](<https://devfeed.tech/tags/components.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [development](<https://devfeed.tech/tags/development.md>), [hacking](<https://devfeed.tech/tags/hacking.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hdmi](<https://devfeed.tech/tags/hdmi.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [oscilloscope](<https://devfeed.tech/tags/oscilloscope.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [soc](<https://devfeed.tech/tags/soc.md>), [vita](<https://devfeed.tech/tags/vita.md>)

### AI overview

The article documents an unsuccessful attempt to develop an HDMI mod for the PlayStation Vita. It explains the Vita's MIPI DSI outputs, the constraints of its hardware layout, and the proposed use of the ADV7533 to convert the display signal to HDMI.

### Source excerpt

For the last couple of months, I've been developing an HDMI mod for the Vita on my free time. I thought it would be a fun project to practice my hardware design skills even though the end product would not be too useful (the VitaTV already exists). Unfortunately, this project did not end in success but I want to write about it anyways so you can see what I've been doing with some of the leftover money from my adapter project.