# mmWave

Published articles for mmWave.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## FACE: Flow-Guided Angular Channel Estimation Framework for mmWave MIMO Systems

DevFeed: [FACE: Flow-Guided Angular Channel Estimation Framework for mmWave MIMO Systems](<https://devfeed.tech/articles/face-flow-guided-angular-channel-estimation-framework-for-mmwave-mimo-systems-141668.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.21698>)

Author: Samitha Gunarathne, Eslam Eldeeb, Nurul Huda Mahmood, Matti Latva-aho

Published: 2026-11-18T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Machine Learning](<https://devfeed.tech/sources/arxiv-machine-learning.md>)

Topics: [Machine learning](<https://devfeed.tech/topics/machine-learning.md>), [communications](<https://devfeed.tech/topics/communications.md>)

Tags: [angular](<https://devfeed.tech/tags/angular.md>), [channel](<https://devfeed.tech/tags/channel.md>), [cost](<https://devfeed.tech/tags/cost.md>), [cs-lg](<https://devfeed.tech/tags/cs-lg.md>), [csi](<https://devfeed.tech/tags/csi.md>), [diffusion](<https://devfeed.tech/tags/diffusion.md>), [distributions](<https://devfeed.tech/tags/distributions.md>), [domain](<https://devfeed.tech/tags/domain.md>), [estimator](<https://devfeed.tech/tags/estimator.md>), [flow](<https://devfeed.tech/tags/flow.md>), [flow-matching](<https://devfeed.tech/tags/flow-matching.md>), [framework](<https://devfeed.tech/tags/framework.md>), [machine-learning](<https://devfeed.tech/tags/machine-learning.md>), [mimo](<https://devfeed.tech/tags/mimo.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [pilot](<https://devfeed.tech/tags/pilot.md>), [sampling](<https://devfeed.tech/tags/sampling.md>), [sparsity](<https://devfeed.tech/tags/sparsity.md>), [time](<https://devfeed.tech/tags/time.md>)

### AI overview

FACE uses flow matching as a generative channel prior, exploiting angular-domain sparsity to estimate mmWave MIMO channels from noisy, limited pilot observations. The abstract reports higher accuracy than conventional and diffusion-based estimators across diverse configurations, with high accuracy retained using fewer pilots and average achievable rate close to the perfect-CSI benchmark. Compared with diffusion-based estimation, FACE uses substantially fewer sampling steps and achieves superior or comparable accuracy, reducing inference time and computational cost. These are numerical results reported in the abstract; the excerpt does not provide experimental details.

### Source excerpt

arXiv:2611.21698v1 Announce Type: new Abstract: Acquiring accurate channel state information (CSI) is essential for millimeter-wave (mmWave) multi-input multi-output (MIMO) systems. However, it remains challenging due to high-dimensional channels, limited pilot observations, and measurement noise. To address these challenges, we propose flow-guided angular channel estimation (FACE), a novel channel estimation framework based on flow matching, an emerging generative modeling paradigm that learns continuous transport dynamics between probability distributions. FACE exploits the inherent angular-domain sparsity of mmWave channels and incorporates the learned flow matching model as a generative channel prior. Numerical results show that FACE consistently achieves higher channel estimation accuracy than both conventional estimators and diffusion-based generative estimator across diverse channel and system configurations. Moreover, FACE maintains high estimation accuracy with fewer pilot observations and achieves an average achievable rate close to the perfect-CSI benchmark. Compared with diffusion-based estimation, FACE requires substantially fewer sampling steps while achieving superior or comparable estimation accuracy, reducing inference time and computational cost. Overall, the proposed framework demonstrates the potential of flow matching for accurate, pilot-efficient, and computationally efficient mmWave MIMO channel estimation.

## Causal AI-Driven Secure mmWave Beam Alignment with Defensive Variational Autoencoders

DevFeed: [Causal AI-Driven Secure mmWave Beam Alignment with Defensive Variational Autoencoders](<https://devfeed.tech/articles/causal-ai-driven-secure-mmwave-beam-alignment-with-defensive-variational-autoencoders-135188.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.18321>)

Author: Nasir Khan, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil, Sinem Coleri, Cicek Cavdar

Published: 2026-11-16T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Artificial Intelligence](<https://devfeed.tech/sources/arxiv-artificial-intelligence.md>)

Topics: [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [VAE](<https://devfeed.tech/topics/vae.md>), [Adversarial attacks](<https://devfeed.tech/topics/adversarial-attacks.md>), [causality](<https://devfeed.tech/topics/causality.md>), [Fine-tuning](<https://devfeed.tech/topics/fine-tuning.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [alignment](<https://devfeed.tech/tags/alignment.md>), [autoencoders](<https://devfeed.tech/tags/autoencoders.md>), [beam](<https://devfeed.tech/tags/beam.md>), [causal-ai](<https://devfeed.tech/tags/causal-ai.md>), [cs-ai](<https://devfeed.tech/tags/cs-ai.md>), [defensive](<https://devfeed.tech/tags/defensive.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>)

### AI overview

The proposed mmWave beam alignment framework combines causal feature selection with adversarial input defense. Its two-stage algorithm learns a Bayesian graph linking RSSI measurements to the optimal beam, then selects relevant inputs for the classifier. A defensive variational autoencoder (DVAE) reconstructs perturbed RSSI, with end-to-end classifier fine-tuning on those representations. In simulations, causal selection achieved accuracy comparable to conventional methods, at 829x lower per-sample computational cost than SHAP, and reduced beam sweeping by 59.4% versus conventional DL selection and 89.8% versus exhaustive search. The DVAE maintained 85% accuracy across perturbation bounds, preserved baseline performance on unperturbed inputs, and exceeded defensive distillation by 15-20% on average across attack scenarios.

### Source excerpt

arXiv:2611.18321v1 Announce Type: new Abstract: Efficient and secure beam alignment is essential for mmWave communication systems. However, existing deep learning (DL)-based beam alignment methods often neglect causal relationships between inputs and outputs, resulting in limited interpretability, poor generalization, and excessive beam sweeping. Moreover, these DL solutions are vulnerable to adversarial attacks, where small perturbations in received power measurements can mislead beam classifiers. To overcome these issues, we propose a causally-aware DL framework integrating causal discovery into beam alignment. A two-stage causal beam selection algorithm learns a Bayesian graph capturing dependencies between received signal strength indicators (RSSI) as inputs and the optimal beam index as the target variable, then uses it to select a minimal set of relevant input features for the DL classifier. To mitigate adversarial attacks, we introduce a defensive variational autoencoder (DVAE) that maps potentially perturbed inputs back to their clean versions. End-to-end fine-tuning of the downstream beam classifier on the DVAE-reconstructed RSSI representations further boosts prediction accuracy. Simulation results show that causal beam selection achieves accuracy comparable to conventional methods while providing an \(\mathbf{829\times}\) lower per-sample computational cost than SHAP (Shapley Additive Explanations), a widely used explainable AI (XAI)-based feature selection method. It further reduces beam-sweeping overhead by \(\mathbf{59.4\%}\) and \(\mathbf{89.8\%}\), compared to conventional DL-based beam selection and exhaustive search, respectively. The DVAE-based defense effectively denoises adversarial inputs, sustaining 85\% accuracy across different perturbation bounds, retains baseline performance on unperturbed RSSI inputs and surpasses defensive distillation defense scheme by 15--20\% on average under different attack scenarios.

## FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

DevFeed: [FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components](<https://devfeed.tech/articles/foundarf-a-physics-informed-foundation-model-framework-for-radio-frequency-passive-components-124604.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.09003>)

Author: Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou, Lawrence Liu, Sensen Li, David Z. Pan, Taiyun Chi

Published: 2026-11-09T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Artificial Intelligence](<https://devfeed.tech/sources/arxiv-artificial-intelligence.md>)

Topics: [AI Foundation Models](<https://devfeed.tech/topics/ai-foundation-models.md>), [few-shot](<https://devfeed.tech/topics/few-shot.md>)

Tags: [automation](<https://devfeed.tech/tags/automation.md>), [components](<https://devfeed.tech/tags/components.md>), [cs-ai](<https://devfeed.tech/tags/cs-ai.md>), [design](<https://devfeed.tech/tags/design.md>), [design-automation](<https://devfeed.tech/tags/design-automation.md>), [eess-sp](<https://devfeed.tech/tags/eess-sp.md>), [experiments](<https://devfeed.tech/tags/experiments.md>), [few-shot](<https://devfeed.tech/tags/few-shot.md>), [foundation](<https://devfeed.tech/tags/foundation.md>), [foundation-model](<https://devfeed.tech/tags/foundation-model.md>), [framework](<https://devfeed.tech/tags/framework.md>), [layout](<https://devfeed.tech/tags/layout.md>), [ml](<https://devfeed.tech/tags/ml.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [model](<https://devfeed.tech/tags/model.md>), [modeling](<https://devfeed.tech/tags/modeling.md>), [physics](<https://devfeed.tech/tags/physics.md>), [physics-informed](<https://devfeed.tech/tags/physics-informed.md>), [prediction](<https://devfeed.tech/tags/prediction.md>), [radio](<https://devfeed.tech/tags/radio.md>), [semiconductor-technologies](<https://devfeed.tech/tags/semiconductor-technologies.md>), [simulations](<https://devfeed.tech/tags/simulations.md>)

### AI overview

FoundaRF aims to improve RF/mmWave passive-component design by replacing task-specific surrogate models with a framework that transfers across layout structures and semiconductor technologies. It combines a self-supervised encoder, adaptive layout processing, and physics-aware decoders for few-shot transfer. In experiments across four semiconductor technologies, it generalized to unseen structures, with up to 3.3x lower prediction error than baselines and up to fourfold lower labeled-data requirements; the abstract also reports shorter design turnaround. These results are reported in the abstract, which does not provide experimental details.

### Source excerpt

arXiv:2611.09003v1 Announce Type: cross Abstract: Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

## 4D Point Splatting for mmWave Radar Micro-Doppler Differentiable Rendering

DevFeed: [4D Point Splatting for mmWave Radar Micro-Doppler Differentiable Rendering](<https://devfeed.tech/articles/4d-point-splatting-for-mmwave-radar-micro-doppler-differentiable-rendering-120733.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.08342>)

Author: Adnan Armouti, Guanyue Qian, Rajalakshmi Nandakumar

Published: 2026-11-06T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Machine Learning](<https://devfeed.tech/sources/arxiv-machine-learning.md>)

Topics: [3D rendering](<https://devfeed.tech/topics/3d-rendering.md>), [Machine Perception](<https://devfeed.tech/topics/machine-perception.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [GPU rendering](<https://devfeed.tech/topics/gpu-rendering.md>), [data augmentation](<https://devfeed.tech/topics/data-augmentation.md>), [3D](<https://devfeed.tech/topics/3d.md>), [gaussian splatting](<https://devfeed.tech/topics/gaussian-splatting.md>)

Tags: [cs-cv](<https://devfeed.tech/tags/cs-cv.md>), [cs-gr](<https://devfeed.tech/tags/cs-gr.md>), [cs-lg](<https://devfeed.tech/tags/cs-lg.md>), [cuda](<https://devfeed.tech/tags/cuda.md>), [data-augmentation](<https://devfeed.tech/tags/data-augmentation.md>), [dataset](<https://devfeed.tech/tags/dataset.md>), [datasets](<https://devfeed.tech/tags/datasets.md>), [doppler](<https://devfeed.tech/tags/doppler.md>), [eess-sp](<https://devfeed.tech/tags/eess-sp.md>), [features](<https://devfeed.tech/tags/features.md>), [gap](<https://devfeed.tech/tags/gap.md>), [generation](<https://devfeed.tech/tags/generation.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [point](<https://devfeed.tech/tags/point.md>), [radar](<https://devfeed.tech/tags/radar.md>), [range](<https://devfeed.tech/tags/range.md>), [raw](<https://devfeed.tech/tags/raw.md>), [rendering](<https://devfeed.tech/tags/rendering.md>), [signal-processing](<https://devfeed.tech/tags/signal-processing.md>), [synthesis](<https://devfeed.tech/tags/synthesis.md>), [synthetic](<https://devfeed.tech/tags/synthetic.md>)

### AI overview

4D Point Splatting (4DPS) fits an explicit moving scene to real mmWave radar captures, aiming to narrow the sim2real gap that forward simulators, learned generators, and static-scene inverse renderers do not address. It initializes room and body geometry from synchronized camera data, represents the scene as oriented points with material, normal, and velocity, and splats them into range and Doppler bins to produce raw complex radar returns. The same signal processing can then create representations for downstream models. Fitting 235 HuPR sequences and 100 RT-Pose sequences yielded median correlations of 0.940/0.830 for range-azimuth, 0.829/0.695 for range-Doppler, and 0.988/0.966 for micro-Doppler. On RT-Pose, a pose model trained on 4DPS renders achieved 21.9 cm MPJPE on real data, compared with 16.7 cm for real-data training and 127.6 cm for the RF-Genesis baseline. A sequence fit took 5.7 minutes on HuPR and 12.9 minutes on RT-Pose using one H100.

### Source excerpt

arXiv:2611.08342v1 Announce Type: cross Abstract: Millimeter-wave radar resolves the micrometer displacements of a moving body as micro-Doppler, enabling gait, gesture, activity, pose and vital-sign sensing. Each task relies on a downstream model trained on real data, yet radar datasets lag orders of magnitude behind vision and language. Brute-force collection will not close that gap, and existing synthesis methods (forward-only simulators, learned generators and static-scene inverse renderers) cannot fit a real capture of a moving body, leaving a sim2real gap. We present 4D Point Splatting (4DPS), a physics-based differentiable renderer that fits an explicit moving scene to a real capture. Using the synchronized camera to initialize the room and body, we represent the scene as oriented points carrying material, normal and velocity, and splat each point into range and Doppler bins. Our output is the raw complex return a real radar records, so we apply the same signal processing on the rendered data to obtain any representation for training any SOTA downstream model. We fit 235 sequences on HuPR and 100 on RT-Pose, two datasets with different radars. Our reconstructions set the state of the art, with median correlations of 0.940 and 0.830 on range-azimuth, 0.829 and 0.695 on range-Doppler, and 0.988 and 0.966 on micro-Doppler. Our renders also set the state of the art in downstream sim2real gap. On RT-Pose, a pose model trained on them reaches 21.9 cm MPJPE on real data, against 16.7 cm for real training and 127.6 cm for the RF-Genesis baseline, where both the rendered- and real-trained models learn nearly the same features. Our custom CUDA kernels fit a sequence in 5.7 minutes on HuPR and 12.9 on RT-Pose on one H100, making dataset-scale inverse rendering of mmWave radar possible for the first time. This work can enable synthetic data generation for any human-centered downstream task and model, and scene editing for data augmentation.

## ISAC-Assisted Proactive Handover in mmWave Networks: Value of Foresight and Localization Requirements

DevFeed: [ISAC-Assisted Proactive Handover in mmWave Networks: Value of Foresight and Localization Requirements](<https://devfeed.tech/articles/isac-assisted-proactive-handover-in-mmwave-networks-value-of-foresight-and-localization-requirements-116516.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.03771>)

Author: Seyed Bagher Hashemi Natanzi, Bo Tang

Published: 2026-11-04T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [Localization (l10n)](<https://devfeed.tech/topics/localization.md>)

Tags: [abstract](<https://devfeed.tech/tags/abstract.md>), [arxiv](<https://devfeed.tech/tags/arxiv.md>), [best](<https://devfeed.tech/tags/best.md>), [communication](<https://devfeed.tech/tags/communication.md>), [cost](<https://devfeed.tech/tags/cost.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [cs-sy](<https://devfeed.tech/tags/cs-sy.md>), [decision](<https://devfeed.tech/tags/decision.md>), [develop](<https://devfeed.tech/tags/develop.md>), [eess-sp](<https://devfeed.tech/tags/eess-sp.md>), [eess-sy](<https://devfeed.tech/tags/eess-sy.md>), [errors](<https://devfeed.tech/tags/errors.md>), [experiments](<https://devfeed.tech/tags/experiments.md>), [framework](<https://devfeed.tech/tags/framework.md>), [future](<https://devfeed.tech/tags/future.md>), [gap](<https://devfeed.tech/tags/gap.md>), [has](<https://devfeed.tech/tags/has.md>), [independent](<https://devfeed.tech/tags/independent.md>), [localization](<https://devfeed.tech/tags/localization.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [networks](<https://devfeed.tech/tags/networks.md>), [proactive](<https://devfeed.tech/tags/proactive.md>), [requirements](<https://devfeed.tech/tags/requirements.md>), [value](<https://devfeed.tech/tags/value.md>)

### AI overview

In ray-traced 28 GHz street-canyon scenarios, short-look-ahead perfect foresight closes most of the gap between service-aware reactive handover and an instantaneous oracle. The proposed framework has a radio unit sense blockers using its communication waveform, while a simulated Open RAN xApp plans handovers; the paper models future-SNR-aware cell selection and defines a policy-independent bound on foresight's value. Realizing most of that benefit requires user and blocker localization to about a decimeter, beyond the radar tracker and meter-level user positioning described. With realistic errors, even an uncertainty-aware planner largely falls back to reactive handover.

### Source excerpt

arXiv:2611.03771v1 Announce Type: cross Abstract: Millimeter-wave (mmWave) links can lose tens of decibels within milliseconds when a person or vehicle crosses the line of sight, and reactive handover recovers only after the outage has begun. Integrated sensing and communication (ISAC) promises to let the network see blockers coming and move users to another cell in advance. This paper asks how much such foresight is worth relative to the best reactive handover, and what sensing accuracy is needed to harvest it. We formulate cost-aware cell selection with knowledge of the future signal-to- noise ratio as a sequential decision problem, define the value of foresight through a policy-independent bound, and develop an ISAC-assisted handover framework in which a radio unit senses blockers with its own communication waveform and a simulated Open RAN xApp plans handovers. Ray-traced experiments in a 28 GHz street canyon, reported on held-out scenarios, show that, with a short look-ahead, perfect foresight closes most of the gap between service-aware (Layer-3) reactive handover and an instantaneous oracle. Harvesting this value, however, requires the user and nearby blockers to be localized to about a decimeter, well beyond what our radar tracker and meter- level user positioning provide; with realistic errors, even an uncertainty-aware planner largely defers to reactive handover.

## Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM

DevFeed: [Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM](<https://devfeed.tech/articles/spectral-convolutional-factorized-transformer-for-joint-multipath-parameter-estimation-applications-to-mmwave-positioning-and-radio-slam-115170.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.01491>)

Author: Yaya Etiabi, Wessam Ajib, Halima Elbiaze

Published: 2026-11-03T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Artificial Intelligence](<https://devfeed.tech/sources/arxiv-artificial-intelligence.md>)

Topics: [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [communications](<https://devfeed.tech/topics/communications.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>)

Tags: [6g](<https://devfeed.tech/tags/6g.md>), [ai](<https://devfeed.tech/tags/ai.md>), [applications](<https://devfeed.tech/tags/applications.md>), [attention](<https://devfeed.tech/tags/attention.md>), [beam](<https://devfeed.tech/tags/beam.md>), [channel](<https://devfeed.tech/tags/channel.md>), [communication](<https://devfeed.tech/tags/communication.md>), [complex](<https://devfeed.tech/tags/complex.md>), [component](<https://devfeed.tech/tags/component.md>), [convolution](<https://devfeed.tech/tags/convolution.md>), [cs-ai](<https://devfeed.tech/tags/cs-ai.md>), [data](<https://devfeed.tech/tags/data.md>), [decoder](<https://devfeed.tech/tags/decoder.md>), [delay](<https://devfeed.tech/tags/delay.md>), [eess-sp](<https://devfeed.tech/tags/eess-sp.md>), [environment](<https://devfeed.tech/tags/environment.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [parameter](<https://devfeed.tech/tags/parameter.md>), [positioning](<https://devfeed.tech/tags/positioning.md>), [radio](<https://devfeed.tech/tags/radio.md>), [slam](<https://devfeed.tech/tags/slam.md>), [transformer](<https://devfeed.tech/tags/transformer.md>)

### AI overview

SCFT explicitly estimates multipath geometry from noisy complex channel estimates and physical beam-pair descriptors, targeting information that communication-focused channel estimators may not recover. It combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to classify LoS and NLoS paths and estimate delay, AoA, and AoD. On realistic ray-tracing data, it reduced GOSPA error by 13.4% versus ResNet, the strongest competing baseline. In independent snapshot evaluations, position RMSE was lower by 18.5% for positioning and 65.0% for radio SLAM, relative to ResNet. The supplied abstract does not provide further experimental details.

### Source excerpt

arXiv:2611.01491v1 Announce Type: cross Abstract: Future 6G wireless networks are expected to evolve toward AI-native systems that support intelligent, environment-aware services, including positioning and mapping. Current research has already integrated AI into several aspects of communication, particularly wireless channel estimation. However, most learning-based channel estimators focus on communication-oriented objectives rather than explicitly estimating multipath parameters such as delay, angle of arrival (AoA), and angle of departure (AoD). These parameters provide essential geometric information for downstream tasks including positioning and radio simultaneous localization and mapping (SLAM). In this work, we propose a Spectral-Convolutional Factorized Transformer (SCFT) for joint multipath component (MPC) estimation from noisy complex channel estimates and physical beam-pair descriptors. SCFT combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to detect and classify line-of-sight (LoS) and non-line-of-sight (NLoS) paths and estimate their observed delays, AoAs, and AoDs. Experiments on realistic ray-tracing data show that SCFT reduces the generalized optimal sub-pattern assignment (GOSPA) error by 13.4% compared with ResNet, the strongest competing baseline. We further demonstrate this advantage in independent snapshot positioning and radio SLAM, where SCFT reduces position RMSE by 18.5% and 65.0%, respectively, relative to ResNet. These findings highlight the importance of explicitly recovering multipath geometry, as improvements in MPC estimation can translate into substantial gains in downstream tasks.

## Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks

DevFeed: [Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks](<https://devfeed.tech/articles/digital-twin-assisted-fast-beam-alignment-for-mmwave-mimo-networks-113858.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.01107>)

Author: Muhammad Kamran Saeed, Ashfaq Khokhar

Published: 2026-11-03T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Machine Learning](<https://devfeed.tech/sources/arxiv-machine-learning.md>), [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [AI Networking](<https://devfeed.tech/topics/ai-networking.md>), [Machine learning](<https://devfeed.tech/topics/machine-learning.md>), [Deep learning](<https://devfeed.tech/topics/deep-learning.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>)

Tags: [alignment](<https://devfeed.tech/tags/alignment.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [beam](<https://devfeed.tech/tags/beam.md>), [channel](<https://devfeed.tech/tags/channel.md>), [cs-it](<https://devfeed.tech/tags/cs-it.md>), [cs-lg](<https://devfeed.tech/tags/cs-lg.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [data](<https://devfeed.tech/tags/data.md>), [digital](<https://devfeed.tech/tags/digital.md>), [digital-twin](<https://devfeed.tech/tags/digital-twin.md>), [ensemble-learning](<https://devfeed.tech/tags/ensemble-learning.md>), [environment](<https://devfeed.tech/tags/environment.md>), [initial-access](<https://devfeed.tech/tags/initial-access.md>), [latency](<https://devfeed.tech/tags/latency.md>), [learning](<https://devfeed.tech/tags/learning.md>), [localization](<https://devfeed.tech/tags/localization.md>), [machine-learning](<https://devfeed.tech/tags/machine-learning.md>), [management](<https://devfeed.tech/tags/management.md>), [math-it](<https://devfeed.tech/tags/math-it.md>), [mimo](<https://devfeed.tech/tags/mimo.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [networks](<https://devfeed.tech/tags/networks.md>), [over](<https://devfeed.tech/tags/over.md>), [real-world](<https://devfeed.tech/tags/real-world.md>)

### AI overview

The proposed mmWave beam management framework uses offline, site-specific ray tracing in a digital twin to train predictions for initial access and beam tracking, addressing the difficulty of collecting deployment-matched measurements. It combines region-based localization, reliability-weighted base and specialist classifiers, and explainability-based pruning to focus allocation on a smaller set of informative beams. The model was trained on imperfect digital-twin data and evaluated on real-world surrogate data. The abstract reports 96.80% top-1 and 98.36% top-3 prediction accuracy and nearly tenfold lower over-the-air sounding overhead than exhaustive sweeping, with better results than cited CNN and deep neural network baselines.

### Source excerpt

arXiv:2611.01107v1 Announce Type: cross Abstract: Millimeter-wave (mmWave) communication relies on directional beam sweeping for initial access, which incurs substantial latency and signaling overhead as antenna arrays grow large and deployments become denser. Machine-learning-based beam prediction can reduce this overhead, but its effectiveness depends on training data that accurately reflects the deployment environment, a requirement that is difficult to meet in practice. This paper presents a latency-aware beam management architecture that integrates digital-twin-assisted prediction, regionbased localization, weighted ensemble learning, and explainability-driven beam pruning into a unified framework. A digital twin (DT) generates site-specific ray-traced channel knowledge offline, enabling environment-aware beam prediction without exhaustive real-world measurements and supporting both initial access and beam tracking. The proposed ensemble learning scheme combines a base classifier and a specialist classifier through reliability-weighted fusion to improve prediction accuracy and robustness, while explainable artificial intelligence (XAI)-based attribution pruning reduces the beam codebook to a small subset of the most informative beams for beam allocation. To capture the distributional mismatch between the DT and real-world environments: the network was trained on imperfect digital-twin data but evaluated on real-world surrobase data. Results show that the proposed method achieves 96.80% top-1 and 98.36% top-3 beam prediction accuracy, while reducing over-the-air sounding overhead by nearly an order of magnitude relative to exhaustive sweeping, outperforming convolutional and deep neural network baselines from prior work.

## PT$^3$: Prototype-Guided Self-Supervised Pretraining for Generalizable mmWave Human Point Cloud Representation

DevFeed: [PT$^3$: Prototype-Guided Self-Supervised Pretraining for Generalizable mmWave Human Point Cloud Representation](<https://devfeed.tech/articles/pt-3-prototype-guided-self-supervised-pretraining-for-generalizable-mmwave-human-point-cloud-representation-108089.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.38551>)

Author: Ziyang Liu, Kieren Yu, Xiao Yang, Xin Yang, Kaishun Wu

Published: 2026-10-30T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Artificial Intelligence](<https://devfeed.tech/sources/arxiv-artificial-intelligence.md>)

Topics: [Representation learning](<https://devfeed.tech/topics/representation-learning.md>), [Model Development](<https://devfeed.tech/topics/model-development.md>)

Tags: [autoregressive](<https://devfeed.tech/tags/autoregressive.md>), [classification](<https://devfeed.tech/tags/classification.md>), [consistency](<https://devfeed.tech/tags/consistency.md>), [cs-ai](<https://devfeed.tech/tags/cs-ai.md>), [datasets](<https://devfeed.tech/tags/datasets.md>), [evolution](<https://devfeed.tech/tags/evolution.md>), [framework](<https://devfeed.tech/tags/framework.md>), [future](<https://devfeed.tech/tags/future.md>), [generation](<https://devfeed.tech/tags/generation.md>), [local](<https://devfeed.tech/tags/local.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [models](<https://devfeed.tech/tags/models.md>), [motion](<https://devfeed.tech/tags/motion.md>), [multiple](<https://devfeed.tech/tags/multiple.md>), [performance](<https://devfeed.tech/tags/performance.md>), [point](<https://devfeed.tech/tags/point.md>), [prediction](<https://devfeed.tech/tags/prediction.md>), [pretraining](<https://devfeed.tech/tags/pretraining.md>), [prototype](<https://devfeed.tech/tags/prototype.md>), [prototypes](<https://devfeed.tech/tags/prototypes.md>), [radar](<https://devfeed.tech/tags/radar.md>)

### AI overview

PT$^3$ pretrains a reusable mmWave human point cloud encoder from unlabeled sequences collected across multiple sources. It represents local spatial states as sparse mixtures of shared prototypes, predicts their temporal evolution autoregressively, and uses observation consistency to stabilize representations under radar perturbations. The same frozen encoder supports action classification, dense point generation, joint pose estimation, and future motion prediction on datasets not used for pretraining. The abstract reports better performance than compared pretraining baselines and competitive or superior results versus task-specific models; it provides no quantitative results or details of the comparisons.

### Source excerpt

arXiv:2610.38551v1 Announce Type: new Abstract: Multi-source millimeter-wave (mmWave) observations offer an opportunity to learn human representations reusable across sensing tasks. However, sparse detections and multipath effects make these observations unstable, challenging existing point cloud pretraining methods. We propose PT$^3$, a prototype-guided self-supervised pretraining framework for mmWave human point clouds. PT$^3$ represents local states in spatial regions as sparse compositions of shared prototypes and learns their temporal evolution through autoregressive prediction. Observation consistency further stabilizes representations under radar perturbations. After pretraining on unlabeled sequences from multiple sources, the same frozen encoder supports action classification, dense point generation, joint pose estimation, and future motion prediction on datasets not used for pretraining. Across these tasks, PT$^3$ outperforms the compared pretraining baselines and achieves competitive or superior performance to task-specific models.

## RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

DevFeed: [RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars](<https://devfeed.tech/articles/radarcom-unlocking-simultaneous-communication-and-sensing-on-commodity-automotive-mmwave-radars-104199.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.36622>)

Author: Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen

Published: 2026-10-28T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [smartdevices](<https://devfeed.tech/topics/smartdevices.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Machine Perception](<https://devfeed.tech/topics/machine-perception.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>)

Tags: [automotive](<https://devfeed.tech/tags/automotive.md>), [communication](<https://devfeed.tech/tags/communication.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [sensing](<https://devfeed.tech/tags/sensing.md>)

### AI overview

RadarCom uses mutual interference between automotive mmWave radars as a carrier for direct radar-to-radar communication while preserving sensing. Its software techniques include slope-mismatch discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression. The system requires no radar hardware modification, waveform redesign, or infrastructure support. Implemented on TI AWR2243 radars, it was evaluated in static, dynamic, and challenging real-world conditions; the abstract reports a 5.55 kbps average effective data rate, symbol error rates below 1.5%, and sensing F1 scores up to 80.5% during concurrent communication.

### Source excerpt

arXiv:2610.36622v1 Announce Type: new Abstract: Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.

## Keeping Inference in the Radio: Design and Measurement of a Spiking Accelerator for mmWave ISAC Activity Recognition

DevFeed: [Keeping Inference in the Radio: Design and Measurement of a Spiking Accelerator for mmWave ISAC Activity Recognition](<https://devfeed.tech/articles/keeping-inference-in-the-radio-design-and-measurement-of-a-spiking-accelerator-for-mmwave-isac-activity-recognition-104092.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.37480>)

Author: Anthony S\\'anchez, Rafael Ruiz, Jos\\'e A. Belloch, Jes\\'us O. Lacruz, Joerg Widmer

Published: 2026-10-28T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Machine Learning](<https://devfeed.tech/sources/arxiv-machine-learning.md>), [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [Neural Network](<https://devfeed.tech/topics/neural-network.md>), [quantization](<https://devfeed.tech/topics/quantization.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [On-device AI](<https://devfeed.tech/topics/on-device-ai.md>), [model architecture](<https://devfeed.tech/topics/model-architecture.md>)

Tags: [accelerators](<https://devfeed.tech/tags/accelerators.md>), [access-point](<https://devfeed.tech/tags/access-point.md>), [cs-ar](<https://devfeed.tech/tags/cs-ar.md>), [cs-lg](<https://devfeed.tech/tags/cs-lg.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [dataset](<https://devfeed.tech/tags/dataset.md>), [design](<https://devfeed.tech/tags/design.md>), [doppler](<https://devfeed.tech/tags/doppler.md>), [energy](<https://devfeed.tech/tags/energy.md>), [framework](<https://devfeed.tech/tags/framework.md>), [fully-connected](<https://devfeed.tech/tags/fully-connected.md>), [generate](<https://devfeed.tech/tags/generate.md>), [handset](<https://devfeed.tech/tags/handset.md>), [ieee](<https://devfeed.tech/tags/ieee.md>), [implement](<https://devfeed.tech/tags/implement.md>), [inference](<https://devfeed.tech/tags/inference.md>), [measurement](<https://devfeed.tech/tags/measurement.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [networks](<https://devfeed.tech/tags/networks.md>), [neural](<https://devfeed.tech/tags/neural.md>), [neural-networks](<https://devfeed.tech/tags/neural-networks.md>), [radio](<https://devfeed.tech/tags/radio.md>), [recognition](<https://devfeed.tech/tags/recognition.md>)

### AI overview

On the public DISC dataset of 60 GHz IEEE 802.11ay measurements, a 132-neuron spiking neural network (SNN) accelerator achieved 94.7% accuracy and 90.7% macro-F1 on unseen subjects, with 206-microsecond inference. Implemented with a spike encoder on a ZCU208 RFSoC, the full path from micro-Doppler frame to activity label runs in programmable logic. Against conventional networks of the same topology on the same device, it used one-eighth the logic and 3.4x less dynamic energy per decision than a network fed the same binary spikes at comparable accuracy; versus one fed a 16-bit spectrogram, it used 7.6x less energy at 1.2 percentage points lower accuracy. Quantization-aware training reduced weights to 3 bits while staying within half a percentage point of the 6-bit network at the same encoder threshold.

### Source excerpt

arXiv:2610.37480v1 Announce Type: cross Abstract: Integrated sensing and communication allows wireless networks to recognize human activity from the channel estimates that the receiver computes anyway. The inference, however, runs on the general-purpose processors of the base station, access point or handset, which are the first components a device switches off to save energy. Always-on sensing therefore requires a classifier that is small enough to remain powered while the rest of the system sleeps. We investigate whether Spiking Neural Networks (SNNs) can provide such a classifier. To this end, we generate SNN accelerators for micro-Doppler activity recognition on the public DISC dataset (IEEE 802.11ay at 60 GHz) with the open-source Spiker+ framework, and implement them together with a spike encoder on a ZCU208 RFSoC, so that the complete chain from micro-Doppler frame to activity label runs in programmable logic. A fully connected SNN with 132 neurons achieves 94.7 % accuracy (90.7 % macro-F1) on unseen subjects and performs an inference in 206 microseconds. Compared to conventional networks of the same topology on the same device, it requires an eighth of the logic and 3.4X less dynamic energy per decision than a network fed the same binary spikes, at comparable accuracy, and 7.6X less than a network fed the 16-bit spectrogram, at 1.2 points lower accuracy. Quantization-aware training reduces its weights to 3 bits within half a percentage point of the 6-bit network at the same encoder threshold

## Learning-Accelerated Joint AP/RIS Optimization for Low-Latency Indoor mmWave XR Networks

DevFeed: [Learning-Accelerated Joint AP/RIS Optimization for Low-Latency Indoor mmWave XR Networks](<https://devfeed.tech/articles/learning-accelerated-joint-ap-ris-optimization-for-low-latency-indoor-mmwave-xr-networks-101666.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.33945>)

Author: Ali Elghariani, Mohammed Elbamby, Anis Elgabli

Published: 2026-10-27T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Networking](<https://devfeed.tech/sources/arxiv-networking.md>)

Topics: [AI Networking](<https://devfeed.tech/topics/ai-networking.md>), [Learning](<https://devfeed.tech/topics/learning.md>)

Tags: [accelerated](<https://devfeed.tech/tags/accelerated.md>), [access-points](<https://devfeed.tech/tags/access-points.md>), [applications](<https://devfeed.tech/tags/applications.md>), [architecture](<https://devfeed.tech/tags/architecture.md>), [channel](<https://devfeed.tech/tags/channel.md>), [controller](<https://devfeed.tech/tags/controller.md>), [convergence](<https://devfeed.tech/tags/convergence.md>), [convex](<https://devfeed.tech/tags/convex.md>), [critical](<https://devfeed.tech/tags/critical.md>), [cs-ni](<https://devfeed.tech/tags/cs-ni.md>), [deployments](<https://devfeed.tech/tags/deployments.md>), [design](<https://devfeed.tech/tags/design.md>), [dimension](<https://devfeed.tech/tags/dimension.md>), [extended-reality](<https://devfeed.tech/tags/extended-reality.md>), [latency](<https://devfeed.tech/tags/latency.md>), [learning](<https://devfeed.tech/tags/learning.md>), [low-latency](<https://devfeed.tech/tags/low-latency.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [networks](<https://devfeed.tech/tags/networks.md>), [optimization](<https://devfeed.tech/tags/optimization.md>), [ris](<https://devfeed.tech/tags/ris.md>)

### AI overview

The paper jointly optimizes access point precoders and reconfigurable intelligent surface phase shifts for indoor mmWave XR, where multiple APs serve users on a shared channel under centralized control. Its alternating optimization method monotonically improves sum rate and converges to a coordinate-wise stationary point, but can be too slow for real-time use as system size grows. A supervised learning-assisted approach uses AO-generated solutions to reduce the number of iterations. Simulations report near-optimal performance with substantially fewer AO iterations; the evidence provided does not quantify the speedup.

### Source excerpt

arXiv:2610.33945v1 Announce Type: new Abstract: This paper studies a reconfigurable intelligent surface (RIS)-assisted indoor architecture for extended reality (XR) applications, where multiple access points (APs) simultaneously serve multiple users over a shared frequency channel under a centralized AP controller. We formulate a non-convex sum-rate maximization problem with coupled AP precoders and RIS phase shifts, and develop a centralized alternating optimization (AO) framework for joint design. We rigorously prove that the proposed AO guarantees monotonic improvement of the sum rate that converges to a coordinate-wise stationary point, despite the non-convexity of the resulting subproblems. Although AO provides reliable performance, its iterative nature limits real-time applicability as the system dimension grows. To overcome this limitation, we propose a supervised learning-assisted approach that leverages AO-generated solutions to significantly accelerate convergence. Simulation results demonstrate that the proposed framework achieves near-optimal performance with substantially fewer AO iterations, which makes it well-suited for latency-critical RIS-assisted XR deployments.

## Digital-Twin-Referenced Belief-Guided Q-Learning for Jammer Identification and Beam-Power Control in a mmWave Model

DevFeed: [Digital-Twin-Referenced Belief-Guided Q-Learning for Jammer Identification and Beam-Power Control in a mmWave Model](<https://devfeed.tech/articles/digital-twin-referenced-belief-guided-q-learning-for-jammer-identification-and-beam-power-control-in-a-mmwave-model-100257.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.16770>)

Author: Parmida Geranmayeh, Onur G\\"unl\\"u

Published: 2026-10-26T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Cryptography and Security](<https://devfeed.tech/sources/arxiv-cryptography-and-security.md>)

Topics: [AI Networking](<https://devfeed.tech/topics/ai-networking.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>), [Digital Trust](<https://devfeed.tech/topics/digital-trust.md>)

Tags: [6g](<https://devfeed.tech/tags/6g.md>), [beam](<https://devfeed.tech/tags/beam.md>), [cs-cr](<https://devfeed.tech/tags/cs-cr.md>), [cs-gt](<https://devfeed.tech/tags/cs-gt.md>), [cs-it](<https://devfeed.tech/tags/cs-it.md>), [digital-twin](<https://devfeed.tech/tags/digital-twin.md>), [energy-efficiency](<https://devfeed.tech/tags/energy-efficiency.md>), [localization](<https://devfeed.tech/tags/localization.md>), [math-it](<https://devfeed.tech/tags/math-it.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [power](<https://devfeed.tech/tags/power.md>), [reinforcement-learning](<https://devfeed.tech/tags/reinforcement-learning.md>), [security](<https://devfeed.tech/tags/security.md>), [simulation](<https://devfeed.tech/tags/simulation.md>)

### AI overview

In a site-specific 28-GHz simulation, belief-guided Q-learning (BGQL) jointly identifies jammers and controls beam power by incorporating a normalized suspicion vector--built from receiver-level residuals and candidate jamming footprints--into its state, reward, and exploratory beam selection. Across 30 paired Monte Carlo runs per configuration with jammer counts known, BGQL reports link-rate scores of 437.4-564.2 Mbit/s, rate-to-device-power scores of 60.37-76.79 Mbit/J, and localization recall of 100% for one jammer and 78%-81% for two, compared with SARSA, Greedy, and Random. Its runtime is higher than SARSA's: 80-130 seconds per run versus 5-14 seconds. The findings are a matched-model simulation proof of concept, not evidence from a deployed network.

### Source excerpt

arXiv:2610.16770v2 Announce Type: replace-cross Abstract: Next-generation wireless networks are expected to support high data rates and reliable connectivity while meeting requirements for energy efficiency, resource management, and communication security. Digital Twin (DT) technology represents expected network behavior and enables the actual network state to be assessed against it. Integrating DT technology with reinforcement learning (RL) supports adaptive resource allocation and security-aware decision-making. This paper presents a simulation-based DT reference and a belief-guided Q-learning (BGQL) method for joint jammer identification and beam-power control in a site-specific 28-GHz network model. Receiver-level residuals between attack-free and attacked configurations are combined with candidate spatial jamming footprints and accumulated into a normalized suspicion vector. BGQL incorporates this vector into its state, reward, and exploratory beam-selection rule. Compared with SARSA, Greedy, and Random across 30 paired Monte Carlo runs per configuration, with known jammer counts, BGQL achieves link-rate scores of 437.4-564.2 Mbit/s, rate-to-device-power scores of 60.37-76.79 Mbit/J, and localization recall of 100% for one jammer and 78%-81% for two jammers. BGQL requires 80-130 s per run versus 5-14 s for SARSA. These findings provide a matched-model simulation proof of concept for DT-referenced belief-guided learning for security-aware beam-power control in 6G networks.

## TACS-RF: Tool-driven Agentic Circuit Synthesis of RF and mmWave Modules

DevFeed: [TACS-RF: Tool-driven Agentic Circuit Synthesis of RF and mmWave Modules](<https://devfeed.tech/articles/tacs-rf-tool-driven-agentic-circuit-synthesis-of-rf-and-mmwave-modules-99909.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2610.31882>)

Author: Tristan Liang, Aravind Nagulu

Published: 2026-10-26T04:00:00Z

Content type: article

Language: en

Sources: [arXiv: Artificial Intelligence](<https://devfeed.tech/sources/arxiv-artificial-intelligence.md>)

Topics: [Chip design](<https://devfeed.tech/topics/chip-design.md>), [agentic workflows](<https://devfeed.tech/topics/agentic-workflows.md>), [Large Language Model](<https://devfeed.tech/topics/llm.md>)

Tags: [agent](<https://devfeed.tech/tags/agent.md>), [agentic](<https://devfeed.tech/tags/agentic.md>), [antenna](<https://devfeed.tech/tags/antenna.md>), [asic](<https://devfeed.tech/tags/asic.md>), [automation](<https://devfeed.tech/tags/automation.md>), [blocks](<https://devfeed.tech/tags/blocks.md>), [cadence](<https://devfeed.tech/tags/cadence.md>), [calibre](<https://devfeed.tech/tags/calibre.md>), [circuit](<https://devfeed.tech/tags/circuit.md>), [claude](<https://devfeed.tech/tags/claude.md>), [claude-opus-4-8](<https://devfeed.tech/tags/claude-opus-4-8.md>), [coding-agent](<https://devfeed.tech/tags/coding-agent.md>), [cs-ai](<https://devfeed.tech/tags/cs-ai.md>), [design](<https://devfeed.tech/tags/design.md>), [design-automation](<https://devfeed.tech/tags/design-automation.md>), [eda](<https://devfeed.tech/tags/eda.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [modules](<https://devfeed.tech/tags/modules.md>), [rf](<https://devfeed.tech/tags/rf.md>), [synthesis](<https://devfeed.tech/tags/synthesis.md>), [tool](<https://devfeed.tech/tags/tool.md>)

### AI overview

TACS-RF uses a Claude Opus 4.8 coding agent to drive EDA tools including Cadence Virtuoso/Spectre, Calibre, Cadence EMX, and Ansys HFSS in RF and mmWave module design. The authors demonstrate the flow with a 240-251 GHz transmitter in 90 nm SiGe BiCMOS. The agent semi-autonomously designed its oscillator, power drivers, frequency doubler, antenna, and interstage matching networks. With parasitic-extracted devices and EM-verified passives, the transmitter reports +5.1 to +6.3 dBm output across an 11 GHz varactor-only tuning range, phase noise of −80 to −88 dBc/Hz at 1 MHz offset, and 361 mW DC power. The abstract says the paper describes how design work is divided between human and agent; it does not provide those details.

### Source excerpt

arXiv:2610.31882v1 Announce Type: new Abstract: We present the framework of TACS-RF - a Tool-driven Agentic Circuit Synthesis of RF and mmWave modules. In this framework, a large-language-model (LLM) coding agent (Claude Opus 4.8) directly drives industry-standard electronic-design-automation (EDA) tools such as Cadence Virtuoso/Spectre, Calibre, Cadence EMX, and Ansys HFSS to design RF and mmWave modules. We validate the framework through the agentic design of a 240-251 GHz sub-THz transmitter in a 90 nm SiGe BiCMOS process. The agent semi-autonomously designed the sub-blocks including a 60 GHz push-push Colpitts VCO with second-harmonic extraction, multistage differential cascode power drivers, a push-push frequency doubler, a differential bowtie antenna, and all the interstage matching networks. The transmitter chain with parasitic-extracted devices and EM-verified passives delivers +5.1 to +6.3 dBm across an 11 GHz varactor-only tuning range, phase noise of -80 to -88 dBc/Hz at 1 MHz offset while consuming a DC power of 361 mW. We describe the agent-driven design flow and the resulting division of labor between human and agent, taking a step toward a "text-to-ASIC" future for designing RF/mmWave hardware.

## AutoSens 2026: Regulation Drives Automotive Sensing Architectures

DevFeed: [AutoSens 2026: Regulation Drives Automotive Sensing Architectures](<https://devfeed.tech/articles/autosens-2026-regulation-drives-automotive-sensing-architectures-63869.md>)

Original publisher: [Read original article](<https://www.eetimes.com/autosens-2026-regulations-drive-automotive-sensing-architectures/>)

Author: Pablo Valerio

Published: 2026-10-02T15:58:50Z

Content type: news

Language: en

Sources: [EE Times](<https://devfeed.tech/sources/ee-times.md>)

Topics: [Cybersecurity](<https://devfeed.tech/topics/cybersecurity.md>), [Self-organizing Team](<https://devfeed.tech/topics/self-organizing-team.md>), [Post-quantum cryptography](<https://devfeed.tech/topics/post-quantum-cryptography.md>), [scheduling](<https://devfeed.tech/topics/scheduling.md>), [Linux Kernel](<https://devfeed.tech/topics/linux-kernel.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [analog](<https://devfeed.tech/tags/analog.md>), [analysis](<https://devfeed.tech/tags/analysis.md>), [automotive](<https://devfeed.tech/tags/automotive.md>), [automotive-architecture](<https://devfeed.tech/tags/automotive-architecture.md>), [autosens](<https://devfeed.tech/tags/autosens.md>), [blog](<https://devfeed.tech/tags/blog.md>), [business](<https://devfeed.tech/tags/business.md>), [centralization](<https://devfeed.tech/tags/centralization.md>), [chip](<https://devfeed.tech/tags/chip.md>), [cnsa-2-0](<https://devfeed.tech/tags/cnsa-2-0.md>), [community](<https://devfeed.tech/tags/community.md>), [compute](<https://devfeed.tech/tags/compute.md>), [cybersecurity](<https://devfeed.tech/tags/cybersecurity.md>), [data](<https://devfeed.tech/tags/data.md>), [designline](<https://devfeed.tech/tags/designline.md>), [detection](<https://devfeed.tech/tags/detection.md>), [digital](<https://devfeed.tech/tags/digital.md>), [digital-products](<https://devfeed.tech/tags/digital-products.md>), [digital-twin](<https://devfeed.tech/tags/digital-twin.md>), [education](<https://devfeed.tech/tags/education.md>), [ee-times](<https://devfeed.tech/tags/ee-times.md>), [ee-times-university](<https://devfeed.tech/tags/ee-times-university.md>), [eelife](<https://devfeed.tech/tags/eelife.md>), [eelive-electronic-design](<https://devfeed.tech/tags/eelive-electronic-design.md>), [eet](<https://devfeed.tech/tags/eet.md>), [electrical-engineering](<https://devfeed.tech/tags/electrical-engineering.md>), [electronic-components](<https://devfeed.tech/tags/electronic-components.md>), [electronic-engineering-times](<https://devfeed.tech/tags/electronic-engineering-times.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [euro-ncap-2026](<https://devfeed.tech/tags/euro-ncap-2026.md>), [europe](<https://devfeed.tech/tags/europe.md>), [fundamentals-courses](<https://devfeed.tech/tags/fundamentals-courses.md>), [ieee-802-15-4ab](<https://devfeed.tech/tags/ieee-802-15-4ab.md>), [incabin](<https://devfeed.tech/tags/incabin.md>), [learning](<https://devfeed.tech/tags/learning.md>), [lidar](<https://devfeed.tech/tags/lidar.md>), [mixed-signal](<https://devfeed.tech/tags/mixed-signal.md>), [mmwave](<https://devfeed.tech/tags/mmwave.md>), [news](<https://devfeed.tech/tags/news.md>), [opinion](<https://devfeed.tech/tags/opinion.md>), [part-search](<https://devfeed.tech/tags/part-search.md>), [product-search](<https://devfeed.tech/tags/product-search.md>), [radar](<https://devfeed.tech/tags/radar.md>), [regulation](<https://devfeed.tech/tags/regulation.md>), [semiconductors](<https://devfeed.tech/tags/semiconductors.md>), [sensor-technology](<https://devfeed.tech/tags/sensor-technology.md>), [software](<https://devfeed.tech/tags/software.md>), [standards](<https://devfeed.tech/tags/standards.md>), [supply-chain-distribution](<https://devfeed.tech/tags/supply-chain-distribution.md>), [tech-papers](<https://devfeed.tech/tags/tech-papers.md>), [technology](<https://devfeed.tech/tags/technology.md>), [uwb](<https://devfeed.tech/tags/uwb.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

At AutoSens Europe 2026, automotive sensing designs reflected tighter safety standards, advances in AI processing, and growing cybersecurity requirements. Companies demonstrated camera and radar systems for cabin monitoring, new image sensors and zonal edge-computing approaches, and hardware supporting post-quantum cryptography. The article reports these product demonstrations and industry developments; many claimed performance figures are attributed to the companies presenting them.

### Source excerpt

At AutoSens Europe, automotive sensing designs reflected tighter safety standards, advances in AI processing, and growing cybersecurity requirements. The post AutoSens 2026: Regulation Drives Automotive Sensing Architectures appeared first on EE Times.