# waveshare

Published articles for waveshare.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards

DevFeed: [Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards](<https://devfeed.tech/articles/arduino-uno-media-carrier-adds-mipi-csi-dsi-and-audio-connectors-to-uno-q-and-ventuno-q-boards-14037.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/10/arduino-uno-media-carrier-adds-mipi-csi-dsi-and-audio-connectors-to-uno-q-and-ventuno-q-boards/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-09-10T00:00:32Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [UNO Q](<https://devfeed.tech/topics/uno-q.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [audio](<https://devfeed.tech/tags/audio.md>), [camera](<https://devfeed.tech/tags/camera.md>), [connectors](<https://devfeed.tech/tags/connectors.md>), [display](<https://devfeed.tech/tags/display.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [linux](<https://devfeed.tech/tags/linux.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [mipi-csi](<https://devfeed.tech/tags/mipi-csi.md>), [news](<https://devfeed.tech/tags/news.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [uno-q](<https://devfeed.tech/tags/uno-q.md>), [ventuno-q](<https://devfeed.tech/tags/ventuno-q.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

The Arduino UNO Media Carrier adds accessible 22-pin MIPI DSI and CSI connectors, three 3.5 mm audio jacks, and RGB LEDs to Arduino UNO Q and VENTUNO Q boards. It is listed at $19.25 or EUR 19.89 including VAT.

### Source excerpt

Arduino UNO Media Carrier board adds three audio jacks, a MIPI DSI display connector, two MIPI CSI camera connectors, and a few RGB LEDs to the Arduino UNO Q and Arduino VENTUNO Q SBCs. Both Arduino "Q" boards already expose MIPI CSI/DSI and audio interfaces, but only through the JMEDIA and JMISC 60-pin headers, which aren't very convenient. The Arduino UNO Media Carrier board fixes that with 22-pin MIPI connectors and 3.5 audio jacks. Arduino UNO Media Carrier (ASX00083) specifications: Compatible SBCs - Arduino UNO Q and Arduino VENTUNO Q Display I/F - 22-pin MIPI DSI connector compatible with standard MIPI-DSI display modules (5-inch, 8-inch, 10.1-inch Waveshare touch display compatible) Camera I/F - 2x 22-pin MIPI-CSI connectors compatible with IMX219 camera modules like the Raspberry Pi Camera Module 2 Audio 3.5 mm (MIC-IN/Headphones Out) audio jack 3.5mm Line Out audio jack 3.5mm Ear Out audio jack Host interfaces 60-pin female [...] The post Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards appeared first on CNX Software - Embedded Systems News.

## ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna

DevFeed: [ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna](<https://devfeed.tech/articles/esp32-c5-pico-board-follows-raspberry-pi-pico-form-factor-ships-with-on-board-or-external-antenna-14035.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/09/esp32-c5-pico-board-follows-raspberry-pi-pico-form-factor-ships-with-on-board-or-external-antenna/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-09-09T07:00:50Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-C5](<https://devfeed.tech/topics/esp32-c5.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>), [cpu](<https://devfeed.tech/topics/cpu.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [SOC](<https://devfeed.tech/topics/soc.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [wifi 6](<https://devfeed.tech/topics/wifi-6.md>), [zigbee](<https://devfeed.tech/topics/zigbee.md>), [Matter](<https://devfeed.tech/topics/matter.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>)

Tags: [802-15-4](<https://devfeed.tech/tags/802-15-4.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [boot](<https://devfeed.tech/tags/boot.md>), [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c5](<https://devfeed.tech/tags/esp32-c5.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [matter](<https://devfeed.tech/tags/matter.md>), [news](<https://devfeed.tech/tags/news.md>), [port](<https://devfeed.tech/tags/port.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [thread](<https://devfeed.tech/tags/thread.md>), [usb](<https://devfeed.tech/tags/usb.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The Waveshare ESP32-C5 Pico is a development board in the Raspberry Pi Pico form factor. It uses an ESP32-C5-MINI-1 series module with a RISC-V processor, dual-band WiFi 6, Bluetooth LE, and 802.15.4 support for Zigbee, Thread, and Matter. The board includes GPIO headers, USB-C, buttons, LEDs, and Li-Ion battery support, with variants offering PCB or external antennas.

### Source excerpt

Waveshare ESP32-C5 Pico board brings the ESP32-C5 dual-band WiFi 6, Bluetooth LE, and 802.15.4 (Zigbee/Thread) SoC to the Raspberry Pi Pico form factor. The board features an ESP32-C5-MINI-1 Series module with PCB or external antenna, two 20-pin GPIO headers, a USB-C port for power and programming, Reset and Boot buttons, and a few LEDs. It also supports Li-Ion battery charging and discharging. Waveshare ESP32-C5 Pico specifications: Wireless module - ESP32-C5-MINI-1 or ESP32-C5-MINI-1U Wireless MCU - Espressif Systems ESP32-C5HF4 CPU Single-core 32-bit RISC-V processor @ up to 240 MHz Low-power RISC-V core @ 48 MHz acting as the main processor for power-sensitive applications Memory - 384 KB SRAM on-chip Storage - 320 KB ROM, 4MB SPI flash Wireless Dual-band (2.4/5 GHz) 802.11ax WiFi 6, 802.11b/g/n WiFi 4 backward compatibility WiFi modes: Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode Bluetooth 5.0 Low Energy (LE) with Mesh support, up [...] The post ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna appeared first on CNX Software - Embedded Systems News.

## DIY ESP32-P4 weather station & air quality monitor connects to LoRa and ESP-NOW sensors, various weather APIs

DevFeed: [DIY ESP32-P4 weather station & air quality monitor connects to LoRa and ESP-NOW sensors, various weather APIs](<https://devfeed.tech/articles/diy-esp32-p4-weather-station-air-quality-monitor-connects-to-lora-and-esp-now-sensors-various-weather-apis-14023.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/03/diy-esp32-p4-weather-station-air-quality-monitor-connects-to-lora-and-esp-now-sensors-various-weather-apis/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-09-03T04:55:46Z

Content type: article

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [lora](<https://devfeed.tech/topics/lora.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [monitor](<https://devfeed.tech/topics/monitor.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [dashboards](<https://devfeed.tech/topics/dashboards.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [ble](<https://devfeed.tech/tags/ble.md>), [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [display](<https://devfeed.tech/tags/display.md>), [diy](<https://devfeed.tech/tags/diy.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lora](<https://devfeed.tech/tags/lora.md>), [monitor](<https://devfeed.tech/tags/monitor.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

This article describes an ESP32-P4 weather station and air quality monitor built from off-the-shelf boards. It uses a 10.1-inch dashboard, a Sensirion SEN66 multisensor, and LoRa and ESP-NOW sensor nodes, with optional weather data from several APIs and no required cloud account.

### Source excerpt

Harald Kreuzer has built an ESP32-P4 weather station and air quality monitor that features a 10.1-inch dashboard display and a built-in Sensirion SEN66 sensor for particulate matter, CO2, VOC, and NOX, and connects to wireless LoRa and ESP-NOW sensors. The project is entirely made of off-the-shelf boards, so no custom hardware is used, and it should be relatively easy to reproduce. It doesn't require any cloud or user account, although it can connect to a choice of weather APIs (Open-Meteo, OpenWeatherMap or Visual Crossing) to display weather forecasts. The build is fully documented in a long blog post, so we'll highlight the key features of the project in this article. Hardware specifications for the main unit: Based on ESP32-P4-Module-DEV-KIT-C Credit card-sized ESP32-P4-Module-DEV-KIT SBC based on an ESP32-P4NRW32 module with ESP32-P4 with 32MB PSRAM and ESP32-C6 for WiFi and BLE 10.1-inch IPS panel with 1280 x 800 resolution, 800:1 contrast ratio, [...] The post DIY ESP32-P4 weather station & air quality monitor connects to LoRa and ESP-NOW sensors, various weather APIs appeared first on CNX Software - Embedded Systems News.

## Developing User Interfaces for Custom Boards with ESP microcontrollers

DevFeed: [Developing User Interfaces for Custom Boards with ESP microcontrollers](<https://devfeed.tech/articles/developing-user-interfaces-for-custom-boards-with-esp-microcontrollers-13832.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/developing-user-interfaces-for-custom-boards-with-esp-microcontrollers/>)

Author: John Lee

Published: 2022-10-10T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [User Interfaces](<https://devfeed.tech/topics/user-interfaces.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [configuration](<https://devfeed.tech/topics/configuration.md>), [GitHub](<https://devfeed.tech/topics/github.md>), [Code](<https://devfeed.tech/topics/code.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [c](<https://devfeed.tech/tags/c.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [esp](<https://devfeed.tech/tags/esp.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [github](<https://devfeed.tech/tags/github.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [lvgl](<https://devfeed.tech/tags/lvgl.md>), [manifest](<https://devfeed.tech/tags/manifest.md>), [project](<https://devfeed.tech/tags/project.md>), [screen](<https://devfeed.tech/tags/screen.md>), [spi](<https://devfeed.tech/tags/spi.md>), [squareline](<https://devfeed.tech/tags/squareline.md>), [user-interfaces](<https://devfeed.tech/tags/user-interfaces.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

This tutorial explains how to add a custom ESP-based board with a custom LCD to SquareLine Studio. It uses a WaveShare 7-inch display example and covers creating a board-support component, configuring display and touch communication, updating build and dependency files, and editing the board manifest.

### Source excerpt

A few weeks ago in this article we have introduced SquareLine Studio and how it can be used to develop user interfaces. This feature was available only for Espressif's boards. But what if we wanted to use this tool for our custom designed board based on an ESP chip with a custom LCD? Here is the solution! What is the best way to add a custom board into SquareLine Studio? Start with the custom_waveshare_7inch example on from esp-bsp repository on GitHub.