# zephyr Published articles for zephyr. This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles. ## What to Expect at the Zephyr Project Workshop & Meetup (September 24, 2026) - Stuttgart, Germany DevFeed: [What to Expect at the Zephyr Project Workshop & Meetup (September 24, 2026) - Stuttgart, Germany]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-16T17:57:36Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Open Source](), [Application Development](), [Testing](), [Simulation](), [Command-line interface]() Tags: [2026](), [blog](), [command-line](), [developers](), [embedded-systems](), [events](), [germany](), [meetup](), [open-source](), [technical](), [workshop](), [zephyr]() ### AI overview The Zephyr community will hold a hands-on workshop and afternoon meetup in Stuttgart, Germany, on September 24, 2026. The workshop will cover practical Zephyr development, while the meetup will feature community-led technical presentations and networking. ### Source excerpt On September 24, the Zephyr community will gather in Stuttgart for a hands-on workshop followed by an afternoon meetup featuring community-led technical presentations. The event is open to experienced contributors, first-time users, students, engineers, and anyone interested in open source embedded development. Attendees may join both sessions or choose either the workshop or the meetup based on their interests. ## What to Expect at the Zephyr Project Workshop & Meetup (September 24, 2026) - Stuttgart, Germany DevFeed: [What to Expect at the Zephyr Project Workshop & Meetup (September 24, 2026) - Stuttgart, Germany]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-16T17:57:36Z Content type: news Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Embedded Software Dev](), [Application Development](), [Testing](), [Simulation](), [Open Source]() Tags: [2026](), [blog](), [command-line](), [community](), [contributors](), [development](), [embedded](), [embedded-systems](), [event](), [events](), [germany](), [meetup](), [open-source](), [sessions](), [simulation](), [technical](), [testing](), [workshop](), [zephyr]() ### AI overview The Zephyr community will hold a hands-on workshop and afternoon meetup in Stuttgart, Germany, on September 24, 2026. The program includes guided exercises, technical presentations, community networking, and discussions of Zephyr-based embedded applications. ### Source excerpt On September 24, the Zephyr community will gather in Stuttgart for a hands-on workshop followed by an afternoon meetup featuring community-led technical presentations. The event is open to experienced contributors, first-time users, students, engineers, and anyone interested in open source embedded development. Attendees may join both sessions or choose either the workshop or the meetup based on their interests. ## What to Expect at the Zephyr Project Meetup (September 19, 2026) - Buenos Aires, Argentina DevFeed: [What to Expect at the Zephyr Project Meetup (September 19, 2026) - Buenos Aires, Argentina]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-15T22:12:26Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Open Source](), [Programming](), [amazon]() Tags: [2026](), [amazon](), [blog](), [community](), [embedded](), [embedded-systems](), [event](), [events](), [meetup](), [open](), [open-source](), [programming](), [software-development](), [zephyr]() ### AI overview The article announces an in-person Zephyr Project Meetup in Buenos Aires on September 19, 2026, organized by Iomico. It describes the event's audience, schedule, technical presentations, and a talk on integrating Amazon Sidewalk's closed protocol into a Zephyr application. ### Source excerpt The Zephyr Project community is heading to Buenos Aires, Argentina! Join us on Saturday, September 19, 2026, for an in-person Zephyr Project Meetup organized by Iomico. The event is open to developers, engineers, contributors, students, technology professionals, and anyone interested in open source, embedded systems programming, and software development. Whether you are an experienced Zephyr developer or are just beginning to explore embedded technologies, you are welcome to join. ## Alif Semi Balletto B1 and Ensemble E1C StartKits feature Cortex-M55 + Ethos-U55 MCU for IoT and Edge AI DevFeed: [Alif Semi Balletto B1 and Ensemble E1C StartKits feature Cortex-M55 + Ethos-U55 MCU for IoT and Edge AI]() Original publisher: [Read original article]() Author: Debashis Das Published: 2026-09-15T09:00:06Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Microcontrollers](), [Embedded Systems](), [Microcontroller](), [cpu](), [Internet of things](), [Artificial Intelligence](), [SDK]() Tags: [802-15-4](), [ai](), [alif](), [ble](), [camera](), [core](), [debugger](), [development-board](), [devkit](), [edge](), [edge-ai](), [embedded-systems](), [hardware](), [i2c](), [iot](), [led](), [low-power](), [mcu](), [microcontrollers](), [mikrobus](), [open-source](), [sensor](), [specifications](), [testing](), [zephyr](), [zephyr-os]() ### AI overview Alif Semiconductor's Balletto B1 and Ensemble E1C StartKits are low-cost development boards built around Cortex-M55 microcontrollers with Ethos-U55 NPUs. The Balletto B1 adds BLE 5.3 and 802.15.4 connectivity, while both boards include camera, audio, sensor expansion, debugging, and power-measurement features. ### Source excerpt Alif Semiconductor's Ensemble E1C (SK-E1C) and Balletto B1 (SK-B1) StartKits are low-cost development boards built around the company's Cortex-M55 + Ethos-U55 microcontrollers. The Balletto B1 adds BLE 5.3 and 802.15.4 wireless connectivity, while the Ensemble E1C does not have built-in wireless connectivity. Both StartKits feature a microcontroller with a 160MHz Cortex-M55 CPU, an Ethos-U55 NPU, 2MB SRAM, and 1.8/1.9MB NVM. They also include an Arducam camera header, a mikroBUS Click Board expansion socket, and two PDM microphones for camera, audio, and sensor-based projects. The Balletto B1 additionally provides the complete RF path to a chip antenna for its wireless subsystem, while both boards feature an on-board Segger J-Link debugger for development and testing. Alif Semiconductor StartKit (SK-B1 and SK-E1C) specifications: MCU SK-E1C - Alif Semiconductor Ensemble E1C SK-B1 - Alif Semiconductor Balletto B1 CPU - Arm Cortex-M55 core with Helium-M Vector Extension @ up to 160 MHz NPU - Arm [...] The post Alif Semi Balletto B1 and Ensemble E1C StartKits feature Cortex-M55 + Ethos-U55 MCU for IoT and Edge AI appeared first on CNX Software - Embedded Systems News. ## Run Zephyr on ESP32 with QEMU: no board required DevFeed: [Run Zephyr on ESP32 with QEMU: no board required]() Original publisher: [Read original article]() Author: John Lee Published: 2026-09-15T00:00:00Z Content type: tutorial Language: en Sources: [Blog on Developer Portal]() Topics: [Zephyr RTOS](), [ESP32](), [qemu](), [Espressif](), [Emulator](), [Embedded Software Dev](), [SDK]() Tags: [blog](), [boot](), [bootloader](), [build](), [debugger](), [emulator](), [esp32](), [esp32-c3](), [esp32-c6](), [esp32-s3](), [espressif](), [firmware](), [flash](), [gdb](), [install](), [qemu](), [sdk](), [toolchain](), [tutorial](), [zephyr]() ### AI overview This tutorial explains how to install and use the Espressif QEMU fork to build and run Zephyr firmware for emulated ESP32, ESP32-S3, ESP32-C3, and ESP32-C6 targets without physical boards. It covers Simple Boot and MCUboot/sysbuild workflows, debugger attachment through GDB, and the relevant Zephyr SDK toolchain setup. ### Source excerpt Install the Espressif QEMU fork and run Zephyr on emulated ESP32, ESP32-S3, ESP32-C3, and ESP32-C6 targets without a physical board. ## Renesas RZ/G3L & RZ/G3SE - Ultra-low-power Cortex-A55 MPUs for industrial HMI and IoT applications DevFeed: [Renesas RZ/G3L & RZ/G3SE - Ultra-low-power Cortex-A55 MPUs for industrial HMI and IoT applications]() Original publisher: [Read original article]() Author: Debashis Das Published: 2026-09-11T13:41:08Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Embedded Systems](), [Hardware](), [Arm](), [cpu](), [Internet of things]() Tags: [arm](), [cortex-a55](), [cpu](), [development-board](), [devices](), [display](), [embedded-systems](), [gateway](), [h-264](), [hardware](), [hmi](), [industrial](), [iot](), [linux](), [low-power](), [medical-devices](), [real-time](), [renesas](), [renesas-mcu](), [smarc](), [systems](), [zephyr](), [zephyr-os]() ### AI overview Renesas introduced the RZ/G3L and RZ/G3SE, two 64-bit MPUs for HMI and IoT edge systems. Both use Arm Cortex-A55 application cores and an Arm Cortex-M33 real-time coprocessor. The RZ/G3L adds a Mali-G31 GPU and H.264 codec for richer HMI applications, while the RZ/G3SE targets IoT devices with basic display needs. Both support low-power standby operation. ### Source excerpt Renesas has expanded its RZ/G Series with the RZ/G3L and RZ/G3SE, two new 64-bit MPUs for HMI and IoT edge systems. Both devices integrate up to four Arm Cortex-A55 application cores clocked at up to 1.2 GHz and a 200 MHz Arm Cortex-M33 real-time coprocessor. The two chips are pin-to-pin compatible but target different applications. The RZ/G3L integrates an Arm Mali-G31 3D GPU and H.264 video codec for HMI applications like retail terminals and medical devices. The RZ/G3SE removes the GPU and video codec and is designed for IoT devices with basic display requirements, including EV chargers and industrial gateway devices. Both can reduce standby power consumption to around 1 mW and resume operation quickly from deep standby, which is useful for devices that need to remain connected while consuming very little power. Renesas RZ/G3L and RZ/G3SE specifications: MPU core CPU Quad-core or Dual-core Arm Cortex-A55 @ up to 1.2 [...] The post Renesas RZ/G3L & RZ/G3SE - Ultra-low-power Cortex-A55 MPUs for industrial HMI and IoT applications appeared first on CNX Software - Embedded Systems News. ## Caught Sleeping at Work(queue) -- Zephyr Podcast #050 DevFeed: [Caught Sleeping at Work(queue) -- Zephyr Podcast #050]() Original publisher: [Read original article]() Author: Benjamin Cabé Published: 2026-09-11T12:46:06Z Content type: news Language: en Sources: [Zephyr Project]() Topics: [WebAssembly](), [qemu](), [ESP32](), [ctf](), [Espressif](), [Arduino](), [RISC-V](), [cortex m4](), [Ethernet](), [Modbus](), [USB](), [Linux]() Tags: [blog](), [ctf](), [esp32](), [espressif](), [ethernet](), [linux](), [modbus](), [perfetto](), [podcast](), [qemu](), [risc-v](), [usb](), [webassembly](), [zephyr]() ### AI overview Episode 50 of the Zephyr podcast covers the Zephyr Developer Summit schedule, Analog Devices' acquisition of Alif Semiconductor, new sensor and board support, SMP coredump improvements, CTF trace conversion to Perfetto, WebAssembly Micro Runtime documentation, and other Zephyr developments. ### Source excerpt ADI buys Alif, WebAssembly in Zephyr, CTF traces reach Perfetto, and why you should never sleep in the system workqueue. ## What to expect at the Zephyr Project Meetup (September 17, 2026) - Zurich, Switzerland DevFeed: [What to expect at the Zephyr Project Meetup (September 17, 2026) - Zurich, Switzerland]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-10T05:00:25Z Content type: news Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Embedded Software Dev](), [Open Source](), [systems](), [Tooling](), [Software]() Tags: [2026](), [blog](), [community](), [developers](), [embedded](), [embedded-systems](), [event](), [events](), [hardware](), [meetup](), [open](), [open-source](), [software](), [software-engineer](), [switzerland](), [talk](), [technical](), [zephyr]() ### AI overview The Zephyr Project community will hold an in-person meetup in Zurich, Switzerland, on September 17, 2026. The event will include technical presentations, networking, and discussions about Zephyr development, hardware, developer tools, and embedded systems. ### Source excerpt The Zephyr Project community is heading to Zurich, Switzerland! Join us on Thursday, September 17, 2026, for an in-person Zephyr Project Meetup organized by Zoi TechCon GmbH. The meetup will take place at Westhive Kitchen, Hardturmstrasse 161, 8005 Zürich, Switzerland. The event is open to developers, engineers, contributors, students, technology professionals, and anyone interested in open source and embedded systems. ## What to expect at the Zephyr Project Meetup (September 15, 2026) - Amsterdam, Netherlands DevFeed: [What to expect at the Zephyr Project Meetup (September 15, 2026) - Amsterdam, Netherlands]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-09T05:00:04Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Zephyr RTOS](), [Embedded Systems](), [Open Source](), [Fuzzing/Fuzz testing](), [simulator](), [developer tooling]() Tags: [2026](), [blog](), [bugs](), [community](), [contributors](), [embedded](), [embedded-systems](), [event](), [events](), [firmware](), [fuzzing](), [harness](), [meetup](), [open-source](), [simulator](), [talk](), [technologies](), [tooling](), [tools](), [zephyr]() ### AI overview The Zephyr Project Meetup in Amsterdam on September 15, 2026, will bring together embedded developers, contributors, students, and engineers to exchange practical knowledge about Zephyr RTOS. The agenda includes talks on JetBrains' work with Zephyr, fuzzing Zephyr applications with AFL and Renode, and making hardware development easier with Schematik. ### Source excerpt What are developers in the Netherlands building with Zephyr? On September 15, the embedded community will meet in Amsterdam to exchange practical knowledge, discuss current work, and learn more about the Zephyr RTOS. The event is open to experienced contributors, first-time users, students, engineers, and anyone curious about open source embedded development. ## What to expect at the Zephyr Project Meetup (September 15, 2026) - Amsterdam, Netherlands DevFeed: [What to expect at the Zephyr Project Meetup (September 15, 2026) - Amsterdam, Netherlands]() Original publisher: [Read original article]() Author: Susan Remmert Published: 2026-09-09T05:00:04Z Content type: news Language: en Sources: [Zephyr Project]() Topics: [Zephyr RTOS](), [Embedded Systems](), [Fuzzing/Fuzz testing](), [Open Source]() Tags: [2026](), [blog](), [c](), [c-plus-plus](), [crashes](), [developer-tooling](), [embedded](), [embedded-systems](), [event](), [events](), [firmware](), [fuzzing](), [harness](), [jetbrains](), [meetup](), [memory-corruption](), [open-source](), [simulator](), [zephyr]() ### AI overview The Zephyr Project Meetup in Amsterdam on September 15, 2026, will bring together embedded developers, contributors, students, and engineers to share practical knowledge about Zephyr RTOS. The agenda includes talks on JetBrains' work with Zephyr, fuzzing Zephyr with AFL and Renode, and making hardware development easier with Schematik. ### Source excerpt What are developers in the Netherlands building with Zephyr? On September 15, the embedded community will meet in Amsterdam to exchange practical knowledge, discuss current work, and learn more about the Zephyr RTOS. The event is open to experienced contributors, first-time users, students, engineers, and anyone curious about open source embedded development. ## YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor DevFeed: [YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor]() Original publisher: [Read original article]() Author: Jean-Luc Aufranc (CNXSoft) Published: 2026-09-07T17:01:57Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Raspberry Pi](), [Linux](), [RISC-V](), [Hardware](), [SOC](), [Embedded Systems](), [Open Source](), [Kernel](), [Software]() Tags: [allwinner](), [allwinner-d-series](), [buildroot](), [cpu](), [embedded-systems](), [gpio](), [hardware](), [linux](), [linux-7-x](), [mipi](), [open-source](), [psram](), [raspberry-pi](), [risc-v](), [single-board-computer](), [specifications](), [spi](), [storage](), [usb](), [zephyr](), [zephyr-os]() ### AI overview YuzukiHD has introduced YuzukiNeko, a Raspberry Pi Pico-sized open-source single-board computer built around the Allwinner F101 RISC-V SoC. It includes a 1.008 GHz C907 core, 8MB or 16MB PSRAM, SPI NOR flash, microSD storage, USB-C, and GPIO expansion, with support for Linux, Buildroot, and Zephyr RTOS. ### Source excerpt YuzukiHD has made another open-source hardware Linux SBC. YuzukiNeko is a Raspberry Pi Pico-sized single board computer powered by a new Allwinner F101 RISC-V SoC. The Allwinner F101 processor features a single 1.008 GHz C907 RISC-V core, 8MB or 16 MB PSRAM, and support for various display interfaces such as MIPI DSI, 24-bit RGB, and LVDS. The YuzukiNeko board itself features the F101 SoC, an SPI NOR flash, a microSD card for storage, a USB-C port, and two 20-pin GPIO headers. YuzukiNeko specifications: SoC - Allwinner F101 CPU - T-head C907 RISC-V core up to 1.008 GHz Memory - 8MB or 16MB PSRAM @ 252 MHz Package - QFN-68 Storage 128 Mbit NOR flash (PY25Q128HA-SUH-IT) MicroSD card slot USB - USB Type-C port for data, power, and programming Expansion 2x 20-pin expansion headers with GPIOs, ADC, 5V, 3.3V, and GND 5x pads with HP out (analog speaker output) and four [...] The post YuzukiNeko - A Linux-capable Allwinner F101 RISC-V SBC with Raspberry Pi Pico form factor appeared first on CNX Software - Embedded Systems News. ## XIAO SAMD21 Plus and RP2040 Plus USB-C boards get additional GPIO pins, integrated Li-ion battery management DevFeed: [XIAO SAMD21 Plus and RP2040 Plus USB-C boards get additional GPIO pins, integrated Li-ion battery management]() Original publisher: [Read original article]() Author: Jean-Luc Aufranc (CNXSoft) Published: 2026-09-07T01:07:22Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Embedded Systems](), [Microcontroller](), [USB](), [Raspberry Pi]() Tags: [arm](), [atmel-samd](), [battery](), [boot](), [circuitpython](), [development-board](), [embedded-systems](), [gpio](), [hardware](), [i2c](), [led](), [mcu](), [micropython](), [raspberry-pi](), [rust](), [seeed-studio](), [software](), [usb](), [zephyr](), [zephyr-os]() ### AI overview Seeed Studio has expanded its XIAO Plus Series with the XIAO SAMD21 Plus and XIAO RP2040 Plus USB-C boards. The boards retain the existing form factor while adding GPIO pins and integrated Li-ion battery management, and support several embedded development platforms. ### Source excerpt Seeed Studio has expanded its XIAO Plus Series introduced in 2025, with the XIAO SAMD21 Plus and XIAO RP2040 Plus USB-C boards adding several GPIOs and integrated Li-ion battery management to the XIAO (SAMD21) and XIAO RP2040, launched in 2020 and 2021, respectively, while keeping the same form factor. XIAO SAMD21 Plus Specifications: MCU - Microchip SAMD21G18 Arm Cortex-M0+ microcontroller at up to 48MHz with 256KB Flash,32KB SRAM USB - 1x USB Type-C port for power and programming Expansion I/Os 2x 7-pin "legacy" headers with 11x analog inputs, 11x digital I/Os, 1x DAC, SPI, UART, and I2C Castellated holes and pads with 16x digital I/Os, I2C,and I2S 3.3V I/O voltage (not 5V tolerant) Misc Reset and Boot buttons RGB LED Charge LED Power Supply 5V via USB-C port Pads for battery On-board PMIC Dimensions - 23.5x17.5 mm Temperature Range - -40°C ~ 85°C The upgraded variant of the XIAO SAMD21 [...] The post XIAO SAMD21 Plus and RP2040 Plus USB-C boards get additional GPIO pins, integrated Li-ion battery management appeared first on CNX Software - Embedded Systems News. ## Strengthening Camera Support in Zephyr for Advanced Vision Applications DevFeed: [Strengthening Camera Support in Zephyr for Advanced Vision Applications]() Original publisher: [Read original article]() Author: Zephyr Project Published: 2026-09-04T21:12:17Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Embedded Software Dev](), [Open Source](), [Framework](), [Artificial Intelligence](), [object-detection](), [real-time](), [Streaming](), [Robotics]() Tags: [ai](), [blog](), [cameras](), [development](), [embedded](), [embedded-systems](), [events](), [india](), [industry-conference](), [object-detection](), [open-source](), [open-source-summit](), [real-time](), [robotics](), [streaming](), [vision](), [zephyr](), [zero-copy]() ### AI overview This event recap examines proposed changes to Zephyr's camera and driver architecture for AI-driven vision workloads. The proposals include attaching metadata and inference results to individual video buffers and adding per-buffer callbacks to improve buffer ownership, reduce CPU wakeups, and support more manageable camera pipelines. The changes remain under exploration through prototypes and community discussions. ### Source excerpt The Zephyr community came together at Open Source Summit India 2026 in Mumbai to share knowledge and explore developments, tooling, and real-world applications across embedded systems. In this second post event blog, we recap two lightning talks from the Zephyr track focused on camera support. ## Strengthening Camera Support in Zephyr for Advanced Vision Applications DevFeed: [Strengthening Camera Support in Zephyr for Advanced Vision Applications]() Original publisher: [Read original article]() Author: Zephyr Project Published: 2026-09-04T21:12:17Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Embedded Software Dev](), [Embedded Systems](), [Open Source](), [Artificial Intelligence](), [systems]() Tags: [ai](), [blog](), [cameras](), [embedded](), [embedded-systems](), [events](), [industry-conference](), [object-detection](), [open-source](), [vision](), [zephyr]() ### AI overview This event recap examines proposed changes to Zephyr's camera and driver architecture for AI vision workloads. It discusses metadata attached to video buffers, per-buffer callbacks, zero-copy sharing, bounded latency, backpressure, and streaming coordination. The proposals remain under exploration through prototypes and community discussions. ### Source excerpt The Zephyr community came together at Open Source Summit India 2026 in Mumbai to share knowledge and explore developments, tooling, and real-world applications across embedded systems. In this second post event blog, we recap two lightning talks from the Zephyr track focused on camera support. ## An RTOS for Ages Two and Up -- Zephyr Podcast #049 DevFeed: [An RTOS for Ages Two and Up -- Zephyr Podcast #049]() Original publisher: [Read original article]() Author: Benjamin Cabé Published: 2026-09-04T20:01:01Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Testing](), [Python](), [Arduino](), [Embedded Software Dev](), [Hardware](), [Robotics]() Tags: [arduino](), [blog](), [firmware](), [github](), [halow](), [hardware](), [podcast](), [pytest](), [robotics](), [test](), [testing](), [zephyr]() ### AI overview Zephyr Podcast #049 covers hardware-in-the-loop testing with the pytest harness in Twister, Arduino Core for Zephyr reaching 1.0, recent project contributions, new drivers and shell features, Wi-Fi HaLow support, and Zephyr robotics activities. ### Source excerpt The Dato DUO and the Teenage Engineering catalogue: lovely open-firmware noise machines that do not run Zephyr ...yet! Using the pytest harness in Twister to coordinate a device under test... ## An RTOS for Ages Two and Up -- Zephyr Podcast #049 DevFeed: [An RTOS for Ages Two and Up -- Zephyr Podcast #049]() Original publisher: [Read original article]() Author: Benjamin Cabé Published: 2026-09-04T20:01:01Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Embedded Software Dev](), [Testing](), [Arduino](), [Hardware](), [Maintainers](), [GitHub](), [Robotics](), [Wi-Fi]() Tags: [arduino](), [blog](), [engineering](), [firmware](), [github](), [halow](), [hardware](), [harness](), [maintainers](), [open](), [podcast](), [robotics](), [test](), [zephyr]() ### AI overview Zephyr Podcast episode 049 covers open-firmware hardware that does not yet run Zephyr, hardware-in-the-loop testing with Twister's pytest harness, project growth and contributors, Arduino Core for Zephyr 1.0, maintainer news, new drivers and subsystems, Wi-Fi HaLow support, and Zephyr's robotics community. ### Source excerpt The Dato DUO and the Teenage Engineering catalogue: lovely open-firmware noise machines that do not run Zephyr ...yet! Using the pytest harness in Twister to coordinate a device under test... ## ArduinoCore-Zephyr 1.0.0 adds support for Arduino VENTUNO Q, updates to Zephyr 4.4.1, and more DevFeed: [ArduinoCore-Zephyr 1.0.0 adds support for Arduino VENTUNO Q, updates to Zephyr 4.4.1, and more]() Original publisher: [Read original article]() Author: Jean-Luc Aufranc (CNXSoft) Published: 2026-09-04T10:27:38Z Content type: release Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Arduino](), [Zephyr RTOS](), [Embedded Systems](), [Embedded Software Dev](), [Hardware](), [Microcontroller](), [webcam](), [ci]() Tags: [arduino](), [bug-fixes](), [camera](), [ci](), [development-board](), [embedded-systems](), [hardware](), [mcu](), [real-time](), [release](), [software-management](), [ventuno-q](), [vision](), [zephyr](), [zephyr-os]() ### AI overview Arduino has released ArduinoCore-Zephyr 1.0.0 with support for the VENTUNO Q SBC and Nicla Vision camera, an update to Zephyr 4.4.1, and bug-fix and CI improvements. The article also lists supported Arduino platforms and installation steps. ### Source excerpt Arduino has just announced the release of ArduinoCore-Zephyr version 1.0.0, with new hardware support, including the VENTUNO Q SBC, an updated Zephyr 4.4.1 base, support for the Nicla Vision camera, and various fixes and improvements. Arduino first announced its plans to switch from Arm Mbed to Zephyr RTOS in July 2024, before releasing the first beta of Arduino Core for Zephyr in December of the same year. ArduinoCore-Zephyr 1.0.0 is not the first stable version, since that was version 0.90.0 released on July 29, 2026. The new release builds on that, so let's see what's new. ArduinoCore-Zephyr 1.0.0 highlights Support for Arduino VENTUNO Q SBC, specifically the STM32H5F5 real-time MCU on the board Update to Zephyr 4.4.1 with the latest upstream improvements, security fixes, and driver support Added Nicla Vision camera support to capture and process image data directly through the Zephyr core Various bug fixes and CI improvements Currently [...] The post ArduinoCore-Zephyr 1.0.0 adds support for Arduino VENTUNO Q, updates to Zephyr 4.4.1, and more appeared first on CNX Software - Embedded Systems News. ## Arduino Core on Zephyr 1.0.0 is here! DevFeed: [Arduino Core on Zephyr 1.0.0 is here!]() Original publisher: [Read original article]() Author: Arduino Team Published: 2026-09-03T15:20:44Z Content type: release Language: en Sources: [Arduino Blog]() Topics: [Arduino](), [Release notes](), [Hardware](), [real-time](), [Robotics](), [Automation](), [Qualcomm]() Tags: [arduino](), [arduino-core-on-zephyr](), [arduino-ide](), [bug-fixes](), [camera](), [image-classification](), [object-detection](), [physical-ai](), [qualcomm](), [real-time](), [release](), [robotics](), [ventuno-q](), [zephyr]() ### AI overview Arduino announced ArduinoCore-Zephyr 1.0.0, adding support for the VENTUNO Q board, updating the base to Zephyr 4.4.1, enabling camera support for the Nicla Vision module, and including bug fixes and cleanup. ### Source excerpt We're excited to announce version 1.0.0 of the ArduinoCore-Zephyr, our biggest release yet. Building on the stability milestone we hit with 0.90.0, this release brings new hardware support, an updated Zephyr base, and a long list of fixes and improvements across the core. Thank you to everyone who tested 0.90.0, filed issues, and helped us [...] The post Arduino Core on Zephyr 1.0.0 is here! appeared first on Arduino Blog. ## Zephyr Project Welcomes Seven New Silver Members as Global Embedded Ecosystem Continues to Grow DevFeed: [Zephyr Project Welcomes Seven New Silver Members as Global Embedded Ecosystem Continues to Grow]() Original publisher: [Read original article]() Author: Maemalynn Meanor Published: 2026-09-03T09:00:07Z Content type: release Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Embedded Software Dev](), [Open Source](), [linux foundation](), [real-time](), [Maintainers]() Tags: [announcements](), [collaboration](), [community](), [connectivity](), [deployment](), [ecosystem](), [embedded](), [firmware](), [linux-foundation](), [maintenance](), [news](), [open-source](), [security](), [summit](), [support](), [testing](), [zephyr]() ### AI overview The Zephyr Project announced seven new Silver members--Canonical, Dojo Five, GigaDevice, Morse Micro, Northern.tech, Siemens and Space Cubics--during its 10th anniversary. The project also introduced its first Community Awards, with winners to be announced at the Zephyr Developer Summit in Prague in October. ### Source excerpt The project celebrates its 10th anniversary with new member growth and the recipients of the first-ever Community Awards at Zephyr Developer Summit in Prague Summary The Zephyr Project marks its... ## Zephyr Project Welcomes Seven New Silver Members as Global Embedded Ecosystem Continues to Grow DevFeed: [Zephyr Project Welcomes Seven New Silver Members as Global Embedded Ecosystem Continues to Grow]() Original publisher: [Read original article]() Author: Maemalynn Meanor Published: 2026-09-03T09:00:07Z Content type: release Language: en Sources: [Zephyr Project]() Topics: [Embedded Systems](), [Embedded Software Dev](), [Open Source](), [linux foundation](), [Maintainers]() Tags: [2026](), [announcements](), [awards](), [community](), [ecosystem](), [embedded](), [linux-foundation](), [news](), [open-source](), [zephyr]() ### AI overview The Zephyr Project announced seven new Silver members--Canonical, Dojo Five, GigaDevice, Morse Micro, Northern.tech, Siemens, and Space Cubics--as it marks its 10th anniversary. The announcement also covers the first Zephyr Community Awards and the upcoming Zephyr Developer Summit in Prague. ### Source excerpt The project celebrates its 10th anniversary with new member growth and the recipients of the first-ever Community Awards at Zephyr Developer Summit in Prague Summary The Zephyr Project marks its... ## Qualcomm introduces Dragonwing Q-2390 and IQ-2390 for consumer and industrial AIoT applications DevFeed: [Qualcomm introduces Dragonwing Q-2390 and IQ-2390 for consumer and industrial AIoT applications]() Original publisher: [Read original article]() Author: Jean-Luc Aufranc (CNXSoft) Published: 2026-09-01T14:24:27Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [Embedded Systems](), [cpu](), [Arm](), [RISC-V](), [GPU]() Tags: [4g-lte](), [android](), [artificial-intelligence-ai](), [camera](), [cortex-a55](), [cortex-a78](), [dsp](), [embedded](), [embedded-systems](), [hardware](), [hexagon](), [industrial](), [iot](), [linux](), [npu](), [processor](), [products](), [qualcomm](), [qualcomm-dragonwing](), [risc-v](), [ubuntu](), [wifi-5](), [yocto](), [zephyr](), [zephyr-os]() ### AI overview Qualcomm announced the Dragonwing Q-2390 and IQ-2390 quad-core Cortex-A78/A55 processors for consumer, commercial, and industrial AIoT applications. The Q-2390 targets devices such as retail and smart home products, while the IQ-2390 targets industrial automation, machine vision, building management, and energy systems. The processors include optional RISC-V real-time cores, Adreno graphics, Hexagon processing, camera and display interfaces, networking, and support for Android, Yocto Linux, Ubuntu, and Zephyr RTOS. ### Source excerpt Qualcomm has announced the Qualcomm Dragonwing Q-2390 and IQ-2390 quad-core Cortex-A78/A55 processors for AIoT consumer, commercial and industrial applications. The Dragonwing Q-2390 processor is designed for commercial and consumer devices, notably for applications such as retail and smart home products, as well as smart displays and enterprise edge devices, while the Dragonwing IQ-2390 processor is the SKU from the Dragonwing IQ2 Series designed for industrial automation, machine vision, building management and energy systems. Qualcomm IQ-2390 and Q-2390 specifications: CPU 1x Arm Cortex-A78 core up to 1.5 or 1.9 GHz depending on SKU 3x Arm Cortex-A55 cores up to 1.5 or 1.9 GHz depending on SKU Optional SiFive E61 RISC-V real-time core up to 600MHz with 768kB memory Cache - 512 KB L3 cache GPU - Qualcomm Adreno 704 up to 1.1 GHz Audio DSP - Qualcomm Hexagon V66 up to 1.1 GHz NPU - Qualcomm Hexagon up to 1.1 TOPS DPU [...] The post Qualcomm introduces Dragonwing Q-2390 and IQ-2390 for consumer and industrial AIoT applications appeared first on CNX Software - Embedded Systems News. ## 150,000 Commits Later -- Zephyr Podcast #048 DevFeed: [150,000 Commits Later -- Zephyr Podcast #048]() Original publisher: [Read original article]() Author: Benjamin Cabé Published: 2026-08-28T15:10:59Z Content type: news Language: en Sources: [Zephyr Project]() Topics: [Code](), [ci](), [debug](), [qemu](), [ESP32](), [Raspberry Pi](), [Arduino]() Tags: [arduino](), [blog](), [ci](), [code](), [debug](), [esp32](), [podcast](), [qemu](), [raspberry-pi](), [zephyr]() ### AI overview Zephyr Podcast #048 covers the project's main branch reaching 150,000 commits, increased pull-request merging in August, a trial merge-batch workflow, and new or updated hardware, driver, testing, and QEMU support. It also discusses a custom debug adapter and an I2C register-set library. ### Source excerpt Pre-orders open for the Arduino VENTUNO Q, and what $300 actually buys you 150,000 commits in main, and 1,455 PRs merged in August against 700 a year ago Create your... ## Zephyr in Practice: From Bare-Metal Development to Release Management DevFeed: [Zephyr in Practice: From Bare-Metal Development to Release Management]() Original publisher: [Read original article]() Author: Zephyr Project Published: 2026-08-25T05:00:55Z Content type: article Language: en Sources: [Zephyr Project]() Topics: [Zephyr RTOS](), [Embedded Systems](), [Embedded Software Dev](), [releases](), [Tooling](), [Open Source]() Tags: [2026](), [blog](), [development](), [embedded](), [embedded-systems](), [events](), [industry-conference](), [open-source](), [release-management](), [releases](), [zephyr]() ### AI overview A post-event report from Open Source Summit India 2026 examines two Zephyr sessions: adopting Zephyr from bare-metal development and maintaining downstream Zephyr releases while keeping pace with upstream development. ### Source excerpt The Zephyr community came together at Open Source Summit India 2026 in Mumbai to share knowledge and explore developments, tooling, and real-world applications across embedded systems. In this first post-event blog, we highlight two sessions from the Zephyr track. One explored why Zephyr can initially feel overwhelming to bare-metal developers, while the other examined how downstream Zephyr releases can keep pace with upstream development. ## Developing a Zephyr IoT app with AI DevFeed: [Developing a Zephyr IoT app with AI]() Original publisher: [Read original article]() Author: John Lee Published: 2026-06-15T00:00:00Z Content type: tutorial Language: en Sources: [Blog on Developer Portal]() Topics: [AI Agent](), [Embedded Software Dev](), [Internet of things](), [Artificial Intelligence](), [cursor](), [Testing](), [C](), [Git](), [Open Source](), [real-time]() Tags: [agent](), [ai](), [ai-agent](), [blog](), [code](), [coding](), [cursor](), [development](), [drivers](), [embedded](), [esp](), [esp-idf](), [espressif](), [experiment](), [firmware](), [git](), [how-to](), [iot](), [llm](), [m5stack](), [testing](), [workflow](), [zephyr]() ### AI overview This article describes applying an AI-agent workflow to develop a Zephyr-based IoT application on the ESP DualKey kit from M5Stack. It emphasizes specifications, project boundaries, Git discipline, testing, and bench validation while moving the implementation from ESP-IDF and Rust to Zephyr C. ### Source excerpt Still on improving our AI-based, embedded software workflow, this article applies the same AI-agent discipline to Zephyr. Using the same ESP Dualkey kit from M5Stack, specs, integration rules, plan->execute->commit->test, reusable modules, journals, and Git - without redefining the product. [Next page]()