# e-ink

Electronic ink is an electrophoretic material used in Electronic Paper Displays.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## e-Paper Price Tags Become Picture Frames

DevFeed: [e-Paper Price Tags Become Picture Frames](<https://devfeed.tech/articles/e-paper-price-tags-become-picture-frames-146418.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/20/e-paper-price-tags-become-picture-frames/>)

Author: Zoe Skyforest

Published: 2026-11-20T16:30:42Z

Content type: news

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Image](<https://devfeed.tech/topics/image.md>), [image animation](<https://devfeed.tech/topics/image-animation.md>), [screen](<https://devfeed.tech/topics/screen.md>)

Tags: [backup](<https://devfeed.tech/tags/backup.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [browser](<https://devfeed.tech/tags/browser.md>), [colors](<https://devfeed.tech/tags/colors.md>), [custom-firmware](<https://devfeed.tech/tags/custom-firmware.md>), [display](<https://devfeed.tech/tags/display.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [electronic-shelf-label](<https://devfeed.tech/tags/electronic-shelf-label.md>), [esl](<https://devfeed.tech/tags/esl.md>), [frame](<https://devfeed.tech/tags/frame.md>), [hacks](<https://devfeed.tech/tags/hacks.md>), [images](<https://devfeed.tech/tags/images.md>), [install](<https://devfeed.tech/tags/install.md>), [open-firmware](<https://devfeed.tech/tags/open-firmware.md>), [price-tag](<https://devfeed.tech/tags/price-tag.md>), [software-hacks](<https://devfeed.tech/tags/software-hacks.md>), [tag](<https://devfeed.tech/tags/tag.md>), [timer](<https://devfeed.tech/tags/timer.md>)

### AI overview

pin16 is open firmware for Solum EFR32BG22 electronic shelf labels, specifically the EL016 (200x200) and EL022 (160x296), which use black, white, red, and yellow. It lets users upload images over Bluetooth through a browser; the browser converts them for display, and the labels can show them as timed slideshows or custom graphics. Firmware updates can then be made over Bluetooth, but the initial installation requires SWD reprogramming, and factory firmware cannot be backed up. The excerpt cautions against installing it on tags you do not own.

### Source excerpt

E-paper has lots of applications, though it's found a particularly solid market penetration as a replacement for simple paper price tags. Because why have a cheap slip of paper for ...read more

## ESP32 drivers for tri-color e-paper panels from SES-imagotag shelf labels

DevFeed: [ESP32 drivers for tri-color e-paper panels from SES-imagotag shelf labels](<https://devfeed.tech/articles/esp32-drivers-for-tri-color-e-paper-panels-from-ses-imagotag-shelf-labels-146357.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/20/esp32-drivers-for-tri-color-e-paper-panels-from-ses-imagotag-shelf-labels/>)

Author: Anne Barela

Published: 2026-11-20T15:37:23Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>)

Tags: [adafruit-daily](<https://devfeed.tech/tags/adafruit-daily.md>), [adafruit-gfx](<https://devfeed.tech/tags/adafruit-gfx.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [arduino-library](<https://devfeed.tech/tags/arduino-library.md>), [displays](<https://devfeed.tech/tags/displays.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [github](<https://devfeed.tech/tags/github.md>), [gxepd2](<https://devfeed.tech/tags/gxepd2.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>)

### AI overview

SesEpaper is an Arduino library for ESP32 that drives three black, white and red SES-imagotag panels: the 7.4-inch E2741ES083, 5.65-inch E2565JS0B1 (VUSION 6.0), and 4.2-inch E2417JS0D1. Built on Adafruit GFX, it supports familiar drawing calls. The 7.4- and 5.65-inch panels use command sets unsupported by GxEPD2 and similar libraries; the 4.2-inch works with GxEPD2, but without temperature setting, which controls the drive curve and affects black darkness. The library also includes browser-flashable diagnostic firmware to read chip ID and OTP data and identify an unknown panel. Its 5.65-inch driver reads OTP at startup for image window, timing, and high-voltage ramp settings. Demo cleaning cycles address ghost images on salvaged panels. Documentation is in German.

### Source excerpt

DocBigs Lab has published SesEpaper on GitHub, an Arduino library for ESP32 boards that drives the black, white and red e-paper panels found in SES-imagotag electronic shelf labels. Three panels are supported: a 7.4″ E2741ES083, a 5.65″ E2565JS0B1 (VUSION 6.0) and a 4.2″ E2417JS0D1. The library is built on Adafruit GFX, so the usual drawing [...]

## Tesserae turns e-paper displays into easily customisable dashboards

DevFeed: [Tesserae turns e-paper displays into easily customisable dashboards](<https://devfeed.tech/articles/tesserae-turns-e-paper-displays-into-easily-customisable-dashboards-136250.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/16/tesserae-turns-e-paper-displays-into-easily-customisable-dashboards/>)

Author: Anne Barela

Published: 2026-11-16T21:49:15Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [dashboards](<https://devfeed.tech/topics/dashboards.md>)

Tags: [badger](<https://devfeed.tech/tags/badger.md>), [browser](<https://devfeed.tech/tags/browser.md>), [chrome](<https://devfeed.tech/tags/chrome.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [cloud](<https://devfeed.tech/tags/cloud.md>), [computers](<https://devfeed.tech/tags/computers.md>), [dashboards](<https://devfeed.tech/tags/dashboards.md>), [displays](<https://devfeed.tech/tags/displays.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [inky-frame](<https://devfeed.tech/tags/inky-frame.md>), [kindle](<https://devfeed.tech/tags/kindle.md>), [local](<https://devfeed.tech/tags/local.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [rendering](<https://devfeed.tech/tags/rendering.md>), [server](<https://devfeed.tech/tags/server.md>), [software](<https://devfeed.tech/tags/software.md>), [widgets](<https://devfeed.tech/tags/widgets.md>)

### AI overview

Tesserae lets users design e-paper dashboards in a browser, placing widgets freely or snapping them to a grid. Widgets can display calendars, weather, RSS feeds and Home Assistant data. A local server renders and sends dashboards to supported panels; a cloud server is planned. The listed hardware includes several Pimoroni Inky and Badger displays, ESP32 boards, Seeed's TRMNL, and Kindle and Kobo e-readers. Pimoroni demonstrated a server on Home Assistant Green sending Wikipedia's "On This Day" and a learning-guides RSS feed to an Inky Frame 7.3. A web flasher can load firmware onto Inky Frame boards using Chrome's WebUSB. The excerpt also credits Bernhard Bablok's CircuitPython client for adding support for 5.7-inch and 4-inch Inky Frames and other CircuitPython boards.

### Source excerpt

Les Pounder writing on the Pimoroni blog covers Tesserae, a project from Melbourne developer Kayden D'Mello. Kayden describes it as "an ecosystem for e-ink displays. You design a dashboard in your browser, and Tesserae renders it and sends it to whatever panels you own." The dashboard is designed once in a browser, with widgets placed [...]

## Someone Put a Self-Hosted Dashboard on a 31.5-Inch Color E-Ink Display

DevFeed: [Someone Put a Self-Hosted Dashboard on a 31.5-Inch Color E-Ink Display](<https://devfeed.tech/articles/someone-put-a-self-hosted-dashboard-on-a-31-5-inch-color-e-ink-display-134575.md>)

Original publisher: [Read original article](<https://noted.lol/someone-put-a-self-hosted-dashboard-on-a-31-5-inch-color-e-ink-display/>)

Author: Jeremy

Published: 2026-11-15T18:09:52Z

Content type: news

Language: en

Sources: [Noted](<https://devfeed.tech/sources/noted.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Homelab](<https://devfeed.tech/topics/homelab.md>), [Self-hosted](<https://devfeed.tech/topics/self-hosted.md>), [color](<https://devfeed.tech/topics/color.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ai-assistance](<https://devfeed.tech/tags/ai-assistance.md>), [ambient-light](<https://devfeed.tech/tags/ambient-light.md>), [browser](<https://devfeed.tech/tags/browser.md>), [canvas](<https://devfeed.tech/tags/canvas.md>), [claude](<https://devfeed.tech/tags/claude.md>), [color](<https://devfeed.tech/tags/color.md>), [community](<https://devfeed.tech/tags/community.md>), [css](<https://devfeed.tech/tags/css.md>), [dashboard](<https://devfeed.tech/tags/dashboard.md>), [dashboards](<https://devfeed.tech/tags/dashboards.md>), [developer](<https://devfeed.tech/tags/developer.md>), [development](<https://devfeed.tech/tags/development.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [docker](<https://devfeed.tech/tags/docker.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-ink-display](<https://devfeed.tech/tags/e-ink-display.md>), [reddit](<https://devfeed.tech/tags/reddit.md>), [self-hosted](<https://devfeed.tech/tags/self-hosted.md>), [setup](<https://devfeed.tech/tags/setup.md>)

### AI overview

Tesserae is an open-source, self-hosted dashboard server that builds browser-designed dashboards into images for compatible e-ink displays. A developer used it on a 31.5-inch Fraimic Large Canvas to show GitHub project statistics and activity; the layouts were generated with Claude through Tesserae's MCP server and remain editable HTML, CSS, and JavaScript. Tesserae runs in Docker or as a Home Assistant add-on, requires no account for self-hosting, and supports smaller devices including Seeed reTerminal, TRMNL-compatible panels, Pimoroni Inky, and compatible older Kindles. The Fraimic display is listed at $1,299, prompting cost comparisons with conventional monitors; the developer said this unit was a development sample. E-ink reflects ambient light and keeps content visible without constant refreshes. Reported installation counts reflect only servers opting into telemetry, which is disabled by default.

### Source excerpt

A developer turned a massive 31.5-inch color e-ink display into a self-hosted dashboard using Tesserae. The setup caught Reddit's attention, especially its $1,299 price tag.

## Moments - smart e-ink dashboard adapts to its surroundings

DevFeed: [Moments - smart e-ink dashboard adapts to its surroundings](<https://devfeed.tech/articles/moments-smart-e-ink-dashboard-adapts-to-its-surroundings-124160.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/09/moments-smart-e-ink-dashboard-adapts-to-its-surroundings/>)

Author: Anne Barela

Published: 2026-11-09T21:47:50Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [dashboards](<https://devfeed.tech/topics/dashboards.md>)

Tags: [access-point](<https://devfeed.tech/tags/access-point.md>), [alert](<https://devfeed.tech/tags/alert.md>), [app](<https://devfeed.tech/tags/app.md>), [automation](<https://devfeed.tech/tags/automation.md>), [button](<https://devfeed.tech/tags/button.md>), [console](<https://devfeed.tech/tags/console.md>), [context](<https://devfeed.tech/tags/context.md>), [dashboard](<https://devfeed.tech/tags/dashboard.md>), [data](<https://devfeed.tech/tags/data.md>), [desk](<https://devfeed.tech/tags/desk.md>), [displays](<https://devfeed.tech/tags/displays.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [flashing](<https://devfeed.tech/tags/flashing.md>), [fridge](<https://devfeed.tech/tags/fridge.md>), [github](<https://devfeed.tech/tags/github.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-firmware](<https://devfeed.tech/tags/open-source-firmware.md>), [reterminal-sticky](<https://devfeed.tech/tags/reterminal-sticky.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [subscription](<https://devfeed.tech/tags/subscription.md>), [time](<https://devfeed.tech/tags/time.md>), [trmnl](<https://devfeed.tech/tags/trmnl.md>)

### AI overview

Moments is open-source firmware that turns the Seeed Studio reTerminal Sticky into an e-ink dashboard without a subscription or cloud account. It selects a static widget screen, interactive app, or background automation using inputs such as orientation and time; examples include a morning briefing, fridge recipe app, desk dashboard, and door alert. Flash it from a web page without hardware changes, then use the device's temporary WiFi access point and local console at moments.local to calibrate, configure Moments and widgets, and connect services. Because the display sleeps to save power, pressing volume down triggers an immediate context check.

### Source excerpt

Makestreme has posted Moments, an open-source firmware for the Seeed Studio reTerminal Sticky e-ink display. It turns the Sticky into a dashboard like TRMNL, without a subscription or a cloud account, and changes what's on screen based on where the device is and what time it is. Everything is built around a Moment: a static [...]

## Play text adventures on an e-paper handheld

DevFeed: [Play text adventures on an e-paper handheld](<https://devfeed.tech/articles/play-text-adventures-on-an-e-paper-handheld-123797.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/09/play-text-adventures-on-an-e-paper-handheld/>)

Author: Anne Barela

Published: 2026-11-09T17:05:04Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [interactive storytelling](<https://devfeed.tech/topics/interactive-storytelling.md>), [generative-ai-tools](<https://devfeed.tech/topics/generative-ai-tools.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>)

Tags: [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [autodesk](<https://devfeed.tech/tags/autodesk.md>), [choose-your-own-adventure](<https://devfeed.tech/tags/choose-your-own-adventure.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [easyeda](<https://devfeed.tech/tags/easyeda.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [game](<https://devfeed.tech/tags/game.md>), [gemini](<https://devfeed.tech/tags/gemini.md>), [github](<https://devfeed.tech/tags/github.md>), [gnu](<https://devfeed.tech/tags/gnu.md>), [google](<https://devfeed.tech/tags/google.md>), [handheld](<https://devfeed.tech/tags/handheld.md>), [inkquest](<https://devfeed.tech/tags/inkquest.md>), [play](<https://devfeed.tech/tags/play.md>), [project](<https://devfeed.tech/tags/project.md>), [projects](<https://devfeed.tech/tags/projects.md>), [repository](<https://devfeed.tech/tags/repository.md>), [script](<https://devfeed.tech/tags/script.md>), [story](<https://devfeed.tech/tags/story.md>), [text](<https://devfeed.tech/tags/text.md>)

### AI overview

InkQuest is a handheld text adventure built around an ESP32, an e-paper display, and a rotary encoder. The display shows story text; players scroll through choices with the encoder and press it to select one. Google's Gemini generates the choices and story, allowing new scenes and branches to appear as play continues. The creator designed the enclosure in Autodesk Fusion and the board in EasyEDA, and released the project under GNU General Public License v2.0. The supplied text says demo and walkthrough videos are linked from the repository.

### Source excerpt

Jeremy Ngai Sew Poh has posted InkQuest on GitHub, a handheld text adventure game built around an ESP32, an e-paper display and a rotary encoder. The story text shows on the e-paper screen, the encoder scrolls through the choices, and a press picks one. Instead of a fixed script, the choices and the story come [...]

## Play Text Adventures on an E-Paper Handheld

DevFeed: [Play Text Adventures on an E-Paper Handheld](<https://devfeed.tech/articles/play-text-adventures-on-an-e-paper-handheld-122311.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/07/play-text-adventures-on-an-e-paper-handheld/>)

Author: Navarre Bartz

Published: 2026-11-08T00:00:30Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [generative-ai-tools](<https://devfeed.tech/topics/generative-ai-tools.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [captive-portal](<https://devfeed.tech/tags/captive-portal.md>), [choose-your-own-adventure](<https://devfeed.tech/tags/choose-your-own-adventure.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [eink](<https://devfeed.tech/tags/eink.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [game](<https://devfeed.tech/tags/game.md>), [gameboy](<https://devfeed.tech/tags/gameboy.md>), [games](<https://devfeed.tech/tags/games.md>), [gemini](<https://devfeed.tech/tags/gemini.md>), [github](<https://devfeed.tech/tags/github.md>), [handheld](<https://devfeed.tech/tags/handheld.md>), [internet](<https://devfeed.tech/tags/internet.md>), [led](<https://devfeed.tech/tags/led.md>), [library](<https://devfeed.tech/tags/library.md>), [lighting](<https://devfeed.tech/tags/lighting.md>), [mood](<https://devfeed.tech/tags/mood.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [port](<https://devfeed.tech/tags/port.md>), [rgb-led](<https://devfeed.tech/tags/rgb-led.md>)

### AI overview

Jeremy Ngai's e-paper handheld runs generated choose-your-own-adventure stories. It combines a 2.9-inch e-paper screen, rotary encoder and RGB mood light, with an estimated 20 hours of use per charge. On first boot, users configure Wi-Fi through a captive portal; once online, the device contacts Gemini to generate a story. The excerpt notes that a library of human-written stories could be an alternative, but does not describe that functionality as implemented.

### Source excerpt

Choose your own adventure books were one of the first media to become gamified in the computer era, and [Jeremy Ngai] wanted to bridge the experience further with an e-paper ...read more

## This $48 e-paper display can be whatever you want it to be

DevFeed: [This $48 e-paper display can be whatever you want it to be](<https://devfeed.tech/articles/this-48-e-paper-display-can-be-whatever-you-want-it-to-be-112697.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/02/this-48-e-paper-display-can-be-whatever-you-want-it-to-be/>)

Author: Anne Barela

Published: 2026-11-02T21:37:02Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [api](<https://devfeed.tech/tags/api.md>), [board](<https://devfeed.tech/tags/board.md>), [device](<https://devfeed.tech/tags/device.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [diy](<https://devfeed.tech/tags/diy.md>), [docker](<https://devfeed.tech/tags/docker.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [e-paper-display](<https://devfeed.tech/tags/e-paper-display.md>), [fedora](<https://devfeed.tech/tags/fedora.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [mac](<https://devfeed.tech/tags/mac.md>), [networking](<https://devfeed.tech/tags/networking.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [quotes](<https://devfeed.tech/tags/quotes.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [trmnl](<https://devfeed.tech/tags/trmnl.md>), [weather](<https://devfeed.tech/tags/weather.md>)

### AI overview

The $48 Seeed Studio/TRMNL kit combines a 7.5-inch e-paper panel with a board that fetches a bitmap from an API. Its content depends on the selected plug-in, with examples including calendars, weather, stock quotes, and lunar phases. It can run through TRMNL's service ($1 to start a 14-day trial, then a one-time $50 fee), Seeed's free SenseCraft platform and browser flasher, or a self-hosted Terminus Docker stack. The author chose self-hosting and encountered Unraid bridge networking issues, outdated shipped firmware (1.5.12 versus current 1.8.18), and a serial-port problem with the web flasher on Fedora that did not occur on a Mac. Two 3D-printable cases are available; the prism is simpler because the L-shaped case needs a ribbon-cable channel.

### Source excerpt

Nick Indge, writing for Ars Technica, built out a $48 DIY e-paper kit from Seeed Studio made in partnership with TRMNL. It's a 7.5-inch e-paper panel and a control board that pings an API, pulls down a bitmap, and shows it. Calendars, weather, stock quotes, lunar phases, whatever plug-in you pick. . There are three [...]

## What happens when you run e-paper at 30 FPS?

DevFeed: [What happens when you run e-paper at 30 FPS?](<https://devfeed.tech/articles/what-happens-when-you-run-e-paper-at-30-fps-108359.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/30/what-happens-when-you-run-e-paper-at-30-fps/>)

Author: Anne Barela

Published: 2026-10-30T14:13:00Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [waveshare](<https://devfeed.tech/topics/waveshare.md>), [browser-game](<https://devfeed.tech/topics/browser-game.md>)

Tags: [board](<https://devfeed.tech/tags/board.md>), [costs](<https://devfeed.tech/tags/costs.md>), [custom](<https://devfeed.tech/tags/custom.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [driver](<https://devfeed.tech/tags/driver.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [emulation](<https://devfeed.tech/tags/emulation.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [fps](<https://devfeed.tech/tags/fps.md>), [game-boy](<https://devfeed.tech/tags/game-boy.md>), [gaming](<https://devfeed.tech/tags/gaming.md>), [github](<https://devfeed.tech/tags/github.md>), [inkboy](<https://devfeed.tech/tags/inkboy.md>), [project](<https://devfeed.tech/tags/project.md>), [refresh](<https://devfeed.tech/tags/refresh.md>), [refresh-rate](<https://devfeed.tech/tags/refresh-rate.md>), [test](<https://devfeed.tech/tags/test.md>), [video](<https://devfeed.tech/tags/video.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>), [youtube](<https://devfeed.tech/tags/youtube.md>)

### AI overview

Bo Made It tested the power cost and durability of driving a Waveshare ESP32-S3-ePaper at 30 FPS. The board ran a Game Boy emulator with a custom display driver, and power draw was measured in idle, emulation, and continuous-update gameplay states. To check for permanent marks from the unusually frequent refreshes, the panel was run at 30 FPS for about 20 hours. The driver and emulator are published as InkBoy; the excerpt does not give the test's measured power figures or durability results.

### Source excerpt

Bo Made It measured what it costs to push an e-paper display far past its normal refresh rate, in a video published on YouTube. The test board is the Waveshare ESP32-S3-ePaper, running a custom display driver and a Game Boy emulator at 30 frames per second. The video breaks the power draw down by state: [...]

## Does Running an E-Paper Display at 30 FPS Destroy It?

DevFeed: [Does Running an E-Paper Display at 30 FPS Destroy It?](<https://devfeed.tech/articles/does-running-an-e-paper-display-at-30-fps-destroy-it-105454.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/28/does-running-an-e-paper-display-at-30-fps-destroy-it/>)

Author: Maya Posch

Published: 2026-10-28T20:00:33Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>)

Tags: [e-paper](<https://devfeed.tech/tags/e-paper.md>), [e-paper-display](<https://devfeed.tech/tags/e-paper-display.md>), [fps](<https://devfeed.tech/tags/fps.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [power](<https://devfeed.tech/tags/power.md>), [power-consumption](<https://devfeed.tech/tags/power-consumption.md>), [tech-hacks](<https://devfeed.tech/tags/tech-hacks.md>)

### AI overview

On a Waveshare ESP32-S3-ePaper board running a Game Boy emulator at 30 FPS, average system draw was about 115 mA; isolating the display's contribution put it at roughly 7.4 mA. The excerpt reports that a datasheet's typical one-million-update lifespan would amount to about 9.3 hours at 30 FPS if every frame required a full refresh. In a custom test after 2.16 million frames, some ghosting appeared but cleared with repeated refreshing; no permanent damage had been detected. The test is not conclusive about long-term wear: smart drivers update changed pixels, so refresh counts may differ, and Waveshare recommends against high-FPS use. Damage from such use would not be covered by warranty.

### Source excerpt

Although e-paper displays are famous for being low-power and lasting essentially forever if not damaged physically, the recent push to drive even cheaper e-paper displays at a framerate like 30 ...read more

## 2026 Retrocomputing Challenge: Oldputer Gives Old Eyes Relief with E-ink Display

DevFeed: [2026 Retrocomputing Challenge: Oldputer Gives Old Eyes Relief with E-ink Display](<https://devfeed.tech/articles/2026-retrocomputing-challenge-oldputer-gives-old-eyes-relief-with-e-ink-display-89336.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/17/2026-retrocomputing-challenge-oldputer-gives-old-eyes-relief-with-e-ink-display/>)

Author: Ian Bos

Published: 2026-10-17T17:00:52Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [Retrocomputing](<https://devfeed.tech/topics/retrocomputing.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [smartdevices](<https://devfeed.tech/topics/smartdevices.md>)

Tags: [2026-retrocomputing-challenge](<https://devfeed.tech/tags/2026-retrocomputing-challenge.md>), [contests](<https://devfeed.tech/tags/contests.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-ink-display](<https://devfeed.tech/tags/e-ink-display.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [retrocomputer](<https://devfeed.tech/tags/retrocomputer.md>), [retrocomputing](<https://devfeed.tech/tags/retrocomputing.md>)

### AI overview

The Oldputer project pairs an old e-ink display with an ESP32 and indicator LEDs in a retro-inspired case, creating a desk ornament for displaying information. The article describes its inspiration and points readers to the project's GitHub repository.

### Source excerpt

Modern computers are towers of glass and metal with very few large deviations from one to another. Monitor A will go against B, except you can't tell them apart unless ...read more

## Tiny e-Paper Display Delivers 30 FPS of Game Boy Fun

DevFeed: [Tiny e-Paper Display Delivers 30 FPS of Game Boy Fun](<https://devfeed.tech/articles/tiny-e-paper-display-delivers-30-fps-of-game-boy-fun-86839.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/14/tiny-e-paper-display-delivers-30-fps-of-game-boy-fun/>)

Author: Tyler August

Published: 2026-10-14T18:30:02Z

Content type: news

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [PICO-8](<https://devfeed.tech/topics/pico-8.md>)

Tags: [e-paper](<https://devfeed.tech/tags/e-paper.md>), [eink](<https://devfeed.tech/tags/eink.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [game-boy](<https://devfeed.tech/tags/game-boy.md>), [gameboy](<https://devfeed.tech/tags/gameboy.md>), [games](<https://devfeed.tech/tags/games.md>), [github](<https://devfeed.tech/tags/github.md>), [parts](<https://devfeed.tech/tags/parts.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

A Game Boy emulator project uses a Waveshare ESP32-S3 e-paper board to reach 30 FPS. The implementation varies pulse counts per pixel and deliberately uses display ghosting to produce four shades of grey, with video-assisted calibration of transition timing. The project is still in progress, and its creator plans to open source it when ready.

### Source excerpt

Slow refresh, ghosting and low-contrast -- wait, are we talking about passive matrix LCDs, or e-paper displays? That might be why e-paper Game Boy emulators are a thing: the limitations ...read more

## TICKEY is a clip-on color e-paper display for photos, badges, and desk art

DevFeed: [TICKEY is a clip-on color e-paper display for photos, badges, and desk art](<https://devfeed.tech/articles/this-color-e-paper-clip-is-the-polaroid-that-digital-photos-never-had-61165.md>)

Original publisher: [Read original article](<https://www.yankodesign.com/2026/09/28/this-color-e-paper-clip-is-the-polaroid-that-digital-photos-never-had/>)

Author: JC Torres

Published: 2026-09-28T10:07:06Z

Content type: article

Language: en

Sources: [Yanko Design](<https://devfeed.tech/sources/yanko-design.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Secure Boot](<https://devfeed.tech/topics/secure-boot.md>), [AI Chat](<https://devfeed.tech/topics/ai-chat.md>)

Tags: [accessories](<https://devfeed.tech/tags/accessories.md>), [accessories-gadgets-technology-e-ink-display-picture](<https://devfeed.tech/tags/accessories-gadgets-technology-e-ink-display-picture.md>), [e-ink-display](<https://devfeed.tech/tags/e-ink-display.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [gadgets](<https://devfeed.tech/tags/gadgets.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [picture](<https://devfeed.tech/tags/picture.md>), [technology](<https://devfeed.tech/tags/technology.md>)

### AI overview

TICKEY is a clip-on display built around a 3.7-inch color e-paper panel, with an ESP32-S3, wireless connectivity, and an open firmware platform for custom behavior. Its driver supports more than 48 native colors and offers refresh modes of 13 seconds and 3 seconds. The device can show photos, badge details, or rotating art, and the display uses power while changing its image.

### Source excerpt

This Color E-Paper Clip Is the Polaroid That Digital Photos Never Had A photo you love rarely leaves the phone it was taken on, fading into a camera roll the moment the screen goes dark. TICKEY tries...

## 3D Hangouts - FruitMesh, Monster Eyes and Skull Spine

DevFeed: [3D Hangouts - FruitMesh, Monster Eyes and Skull Spine](<https://devfeed.tech/articles/3d-hangouts-fruitmesh-monster-eyes-and-skull-spine-59382.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/09/24/3d-hangouts-fruitmesh-monster-eyes-and-skull-spine/>)

Author: Noe Ruiz

Published: 2026-09-24T14:00:29Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [3D](<https://devfeed.tech/topics/3d.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>)

Tags: [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [guide](<https://devfeed.tech/tags/guide.md>), [iot](<https://devfeed.tech/tags/iot.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [project](<https://devfeed.tech/tags/project.md>)

### AI overview

A weekly Adafruit roundup showcases an IoT e-ink project, a prototype using Monster Eyes and round TFT displays, and a time-lapse of a 3D-printed skull spine. It also highlights projects combining 3D printing with electronics and microcontrollers.

### Source excerpt

3D Hangouts - E-Ink FruitMesh, Monster Eyes and Skull Spine https://youtube.com/live/WRx1svLihfA?feature=share This week @adafruit Pedro published and showcased his IoT E-ink Meshtatstic project. Noe is prototyping a new project using Monster Eyes and round TFT displays. Timelapse this week features a print-in-place skull with spline. Learn Guide: https://learn.adafruit.com/meshfruit-message-board Project YouTube Video https://youtu.be/FxuyWbHRbRs 4.2 300x400 Tri-Color [...]

## MeshFruit Message Board #3DThursday #3DPrinting

DevFeed: [MeshFruit Message Board #3DThursday #3DPrinting](<https://devfeed.tech/articles/meshfruit-message-board-3dthursday-3dprinting-59389.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/09/24/meshfruit-message-board-3dthursday-3dprinting/>)

Author: Pedro

Published: 2026-09-24T14:00:05Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Internet of things](<https://devfeed.tech/topics/iot.md>), [lora](<https://devfeed.tech/topics/lora.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>)

Tags: [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [3dprinting](<https://devfeed.tech/tags/3dprinting.md>), [3dthursday](<https://devfeed.tech/tags/3dthursday.md>), [build](<https://devfeed.tech/tags/build.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lora](<https://devfeed.tech/tags/lora.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [sensor](<https://devfeed.tech/tags/sensor.md>)

### AI overview

A guide to building an off-grid IoT message board that receives LoRa messages and displays them on a tri-color e-ink screen. The project uses a Feather ESP32-S3, RFM95 LoRa radio, STEMMA QT sensor, battery power, and a 3D-printed case.

### Source excerpt

Build an off-grid message board. This IoT project listens for messages sent across a LoRa network and displays them on a tri-color e-ink. Guide: https://learn.adafruit.com/meshfruit-message-board It features a STEMMA QT sensor that reads CO2, temperature, and humidity Powered by the Feather ESP32-S3 and an RFM95 LoRa radio, this is a great combo for building a [...]

## 3D Hangouts Cover E-Ink FruitMesh, Monster Eyes, and a Skull Spine

DevFeed: [3D Hangouts Cover E-Ink FruitMesh, Monster Eyes, and a Skull Spine](<https://devfeed.tech/articles/live-3d-hangouts-with-noe-and-pedro-58744.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/09/23/live-3d-hangouts-with-noe-and-pedro-85/>)

Author: Noe Ruiz

Published: 2026-09-23T15:00:23Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Internet of things](<https://devfeed.tech/topics/iot.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [MicroPython](<https://devfeed.tech/topics/micropython.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [Python](<https://devfeed.tech/topics/python.md>), [CircuitPython](<https://devfeed.tech/topics/circuitpython.md>)

Tags: [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [guide](<https://devfeed.tech/tags/guide.md>), [iot](<https://devfeed.tech/tags/iot.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [python](<https://devfeed.tech/tags/python.md>), [python-on-microcontrollers](<https://devfeed.tech/tags/python-on-microcontrollers.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

A live 3D Hangouts session features an IoT e-ink Meshtastic project, a prototype using Monster Eyes and round TFT displays, and a print-in-place skull spine. The program also points viewers to related microcontroller and electronics content.

### Source excerpt

3D Hangouts - E-Ink FruitMesh, Monster Eyes and Skull Spine https://youtube.com/live/WRx1svLihfA?feature=share This week @adafruit Pedro published and showcased his IoT E-ink Meshtatstic project. Noe is prototyping a new project using Monster Eyes and round TFT displays. Timelapse this week features a print-in-place skull with spline. Learn Guide: https://learn.adafruit.com/meshfruit-message-board Project YouTube Video https://youtu.be/FxuyWbHRbRs 4.2 300x400 Tri-Color [...]

## Patches Posted With Aim To Mainline Linux Kernel Support For The Amazon Kindle 4

DevFeed: [Patches Posted With Aim To Mainline Linux Kernel Support For The Amazon Kindle 4](<https://devfeed.tech/articles/patches-posted-with-aim-to-mainline-linux-kernel-support-for-the-amazon-kindle-4-57465.md>)

Original publisher: [Read original article](<https://www.phoronix.com/news/Amazon-Kindle-4-Linux-Patches>)

Author: Michael Larabel

Published: 2026-09-21T13:05:33Z

Content type: news

Language: en

Sources: [Phoronix](<https://devfeed.tech/sources/phoronix.md>)

Topics: [Linux Kernel](<https://devfeed.tech/topics/linux-kernel.md>), [patches](<https://devfeed.tech/topics/patches.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [amazon](<https://devfeed.tech/topics/amazon.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [boot](<https://devfeed.tech/topics/boot.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [Arch Linux](<https://devfeed.tech/topics/archlinux.md>), [systemd](<https://devfeed.tech/topics/systemd.md>), [console](<https://devfeed.tech/topics/console.md>), [Arm](<https://devfeed.tech/topics/arm.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [amazon](<https://devfeed.tech/tags/amazon.md>), [arm](<https://devfeed.tech/tags/arm.md>), [boot](<https://devfeed.tech/tags/boot.md>), [console](<https://devfeed.tech/tags/console.md>), [desktop-linux](<https://devfeed.tech/tags/desktop-linux.md>), [device](<https://devfeed.tech/tags/device.md>), [display](<https://devfeed.tech/tags/display.md>), [e-reader](<https://devfeed.tech/tags/e-reader.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [kernel](<https://devfeed.tech/tags/kernel.md>), [linux](<https://devfeed.tech/tags/linux.md>), [linux-benchmarking](<https://devfeed.tech/tags/linux-benchmarking.md>), [linux-hardware-benchmarks](<https://devfeed.tech/tags/linux-hardware-benchmarks.md>), [linux-hardware-reviews](<https://devfeed.tech/tags/linux-hardware-reviews.md>), [linux-how-to](<https://devfeed.tech/tags/linux-how-to.md>), [linux-kernel](<https://devfeed.tech/tags/linux-kernel.md>), [linux-performance](<https://devfeed.tech/tags/linux-performance.md>), [linux-server-benchmarks](<https://devfeed.tech/tags/linux-server-benchmarks.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-graphics](<https://devfeed.tech/tags/open-source-graphics.md>), [patches](<https://devfeed.tech/tags/patches.md>), [phoronix](<https://devfeed.tech/tags/phoronix.md>), [phoronix-test-suite](<https://devfeed.tech/tags/phoronix-test-suite.md>), [storage](<https://devfeed.tech/tags/storage.md>), [systemd](<https://devfeed.tech/tags/systemd.md>), [testing](<https://devfeed.tech/tags/testing.md>), [ubuntu-benchmarks](<https://devfeed.tech/tags/ubuntu-benchmarks.md>), [ubuntu-hardware](<https://devfeed.tech/tags/ubuntu-hardware.md>)

### AI overview

An open-source developer posted patches seeking mainline Linux kernel support for the Amazon Kindle 4, including DeviceTree, console, and internal eMMC support. The patches were submitted for review on the Linux kernel mailing list.

### Source excerpt

Amazon released the Kindle 4 back in 2011 with a 6-inch E-ink display, 2GB internal storage, and running a modified version of Linux. In the years since the Amazon Kindle 4 has been jail-broken and there are some customized Linux distributions with a patched kernel to run on the Kindle 4. Now in 2026 there are patches on the Linux kernel mailing list looking to mainline support for that fifteen year old e-reader device...

## A Comparison of Five Compact E-Ink Gadgets Designed for Focused Use

DevFeed: [A Comparison of Five Compact E-Ink Gadgets Designed for Focused Use](<https://devfeed.tech/articles/screens-got-louder-these-5-e-ink-gadgets-went-deliberately-quiet-41374.md>)

Original publisher: [Read original article](<https://www.yankodesign.com/2026/09/17/screens-got-louder-these-5-e-ink-gadgets-went-deliberately-quiet/>)

Author: JC Torres

Published: 2026-09-17T09:15:02Z

Content type: comparison

Language: en

Sources: [Yanko Design](<https://devfeed.tech/sources/yanko-design.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [touchscreen](<https://devfeed.tech/topics/touchscreen.md>), [Linux](<https://devfeed.tech/topics/linux.md>)

Tags: [boox](<https://devfeed.tech/tags/boox.md>), [e-book-reader](<https://devfeed.tech/tags/e-book-reader.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-ink-display](<https://devfeed.tech/tags/e-ink-display.md>), [e-reader](<https://devfeed.tech/tags/e-reader.md>), [gadgets](<https://devfeed.tech/tags/gadgets.md>), [gadgets-lifestyle-technology-boox-e-book-reader-e-ink-e-ink-display-e-reader](<https://devfeed.tech/tags/gadgets-lifestyle-technology-boox-e-book-reader-e-ink-e-ink-display-e-reader.md>), [lifestyle](<https://devfeed.tech/tags/lifestyle.md>), [screen](<https://devfeed.tech/tags/screen.md>), [technology](<https://devfeed.tech/tags/technology.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>)

### AI overview

The article compares five compact E Ink gadgets designed for narrowly defined uses, including the Xteink X4 Classic and BOOX Picco. It highlights their deliberately limited interfaces, portability, and differences in features such as buttons, touchscreens, processors, batteries, storage, and software.

### Source excerpt

Screens Got Louder, These 5 E-Ink Gadgets Went Deliberately Quiet Screens have gotten loud, and most of them are fighting for the same six to eight inches of attention in your pocket. E Ink is...

## ENILINX TICKEY - An ESP32-S3-based color e-Paper badge with open firmware (Crowdfunding)

DevFeed: [ENILINX TICKEY - An ESP32-S3-based color e-Paper badge with open firmware (Crowdfunding)](<https://devfeed.tech/articles/enilinx-tickey-an-esp32-s3-based-color-e-paper-badge-with-open-firmware-crowdfunding-35040.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/09/17/enilinx-tickey-esp32-s3-color-e-paper-badge-with-open-firmware/>)

Author: Debashis Das

Published: 2026-09-17T00:00:34Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [display](<https://devfeed.tech/tags/display.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [epaper](<https://devfeed.tech/tags/epaper.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [kickstarter](<https://devfeed.tech/tags/kickstarter.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [news](<https://devfeed.tech/tags/news.md>), [nfc](<https://devfeed.tech/tags/nfc.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [qr-code](<https://devfeed.tech/tags/qr-code.md>), [screen](<https://devfeed.tech/tags/screen.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

ENILINX has launched the TICKEY, a 3.7-inch color e-paper badge and desk display based on the ESP32-S3. It includes Wi-Fi, Bluetooth, NFC, a rechargeable battery, and support for smartphone updates, with standard and Developer Edition storage options. The company describes the firmware as open source, but no repository or further implementation details were available when the article was written.

### Source excerpt

ENIAC (operating as ENILINX) has launched the TICKEY, a 3.7-inch color e-Paper smart badge and desk display built around an ESP32-S3 MCU. The device features Wi-Fi, Bluetooth, and NFC connectivity, allowing users to update the screen from a smartphone without requiring continuous power to hold a static image. The display uses Modos' color e-paper technology to deliver 48+ native colors, with refresh times as fast as 3 seconds and sunlight readability. Measuring just 3.8mm thick and weighing 45 grams, TICKEY features an aluminum-alloy body and interchangeable faceplates, and supports NFC and QR code-based web profile sharing. The standard version includes 8MB of storage, whereas the Developer Edition offers 128MB for more advanced applications. These features make it suitable for desk reminders, event identification, digital business cards, and interactive maker projects. TICKEY specifications: Wireless MCU - ESP32-S3 Dual-core Tensilica LX7 microcontroller @ up to 240 MHz Wireless - 2.4 GHz 802.11n [...] The post ENILINX TICKEY - An ESP32-S3-based color e-Paper badge with open firmware (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

## Moving from Wear OS to a Pebble Watch

DevFeed: [Moving from Wear OS to a Pebble Watch](<https://devfeed.tech/articles/from-wear-to-pebble-28104.md>)

Original publisher: [Read original article](<https://commonsware.com/blog/2026/08/08/from-wear-to-pebble.html>)

Author: CommonsWare

Published: 2026-08-08T10:34:08Z

Content type: opinion

Language: en

Sources: [The CommonsBlog](<https://devfeed.tech/sources/the-commonsblog.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [Android](<https://devfeed.tech/topics/android.md>), [Kotlin](<https://devfeed.tech/topics/kotlin.md>)

Tags: [android](<https://devfeed.tech/tags/android.md>), [blog](<https://devfeed.tech/tags/blog.md>), [devices](<https://devfeed.tech/tags/devices.md>), [eink](<https://devfeed.tech/tags/eink.md>), [kotlin-multiplatform](<https://devfeed.tech/tags/kotlin-multiplatform.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [sdk](<https://devfeed.tech/tags/sdk.md>)

### AI overview

The author explains moving from Wear OS to a Pebble watch, valuing its lower power use, open source foundation, and developer ecosystem despite its lower capabilities.

### Source excerpt

I have moved off of Wear OS and onto a Pebble watch!

## postmarketOS in 2026-01: monthly blog post reboot

DevFeed: [postmarketOS in 2026-01: monthly blog post reboot](<https://devfeed.tech/articles/postmarketos-in-2026-01-monthly-blog-post-reboot-41768.md>)

Original publisher: [Read original article](<https://postmarketos.org/blog/2026/01/25/pmOS-update-2026-01/>)

Published: 2026-01-25T00:00:00Z

Content type: article

Language: en

Sources: [postmarketOS](<https://devfeed.tech/sources/postmarketos-blog.md>)

Topics: [Open Source](<https://devfeed.tech/topics/open-source.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [Mobile](<https://devfeed.tech/topics/mobile.md>), [Kernel](<https://devfeed.tech/topics/kernel.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Software Testing](<https://devfeed.tech/topics/software-testing.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [blog-post](<https://devfeed.tech/tags/blog-post.md>), [bootloader](<https://devfeed.tech/tags/bootloader.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [fosdem](<https://devfeed.tech/tags/fosdem.md>), [foss](<https://devfeed.tech/tags/foss.md>), [kernel](<https://devfeed.tech/tags/kernel.md>), [linux](<https://devfeed.tech/tags/linux.md>), [mobile](<https://devfeed.tech/tags/mobile.md>), [pinenote](<https://devfeed.tech/tags/pinenote.md>), [postmarketos](<https://devfeed.tech/tags/postmarketos.md>), [team](<https://devfeed.tech/tags/team.md>), [update](<https://devfeed.tech/tags/update.md>)

### AI overview

A postmarketOS update explains the project's new blog format, highlights organizational changes and contributor work, and previews FOSDEM 2026 talks about Linux Mobile, Fairphone kernel support, and reliability. It also covers PineNote and other device, package, kernel, and bootloader contributions.

### Source excerpt

A new year is a good opportunity to reflect on what has worked and what did not, and improve the things that didn't. We did that with the "monthly" blog posts, of which we had published the last one for October 2025. The reason that it took us so long to write these is, that we were trying to link every merge request that got merged since the previous post and write short summaries for most of them. While this results in a very detailed account of what has happened, it became less feasible over time as we had more contributions in postmarketOS. After a good conversation we decided to change the format to talk about the highlights and going into detail sometimes, instead of achieving a complete report of everything that has happened. One major goal of the previous approach was thanking all the amazing people who contributed to the project, but we solved that by just adding the contributor names in the blog post in a separate section. The title image of this blog post was taken at the very inspiring 39C3. If you would like to have some postmarketOS stickers as well, the next chance to get them is FOSDEM 2026 where we will have our own stand again where you can stop by and talk to us about all things postmarketOS! We are also excited to have two talks from postmarketOS team members: Mainline kernel for Fairphones - 2026 update postmarketOS: Reliability in 2026 ...as well as many more postmarketOS and Linux Mobile related talks in the FOSS on Mobile devroom! Organizational Alexey M. stepped down as Trusted Contributor. He has been improving postmarketOS across the whole stack since 2019. Among lots of other things he created libapk-qt and used it to add an apk backend to KDE's Plasma Discover, which eventually found its way upstream. He also improved pmbootstrap, maintained multiple devices and kernels and did a lot of kernel and bootloader work. Thank you very much and all the best for your new endeavours! The PineNote using Sway with hrdl's opinionated configuration. No

## Raspberry-LLM - Making My Raspberry Pico a Little Smarter

DevFeed: [Raspberry-LLM - Making My Raspberry Pico a Little Smarter](<https://devfeed.tech/articles/raspberry-llm-making-my-raspberry-pico-a-little-smarter-46531.md>)

Original publisher: [Read original article](<https://eugeneyan.com//writing/raspberry-llm/>)

Author: Eugene Yan

Published: 2023-04-16T00:00:00Z

Content type: tutorial

Language: en

Sources: [Eugene Yan](<https://devfeed.tech/sources/eugene-yan.md>)

Topics: [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [Large Language Model](<https://devfeed.tech/topics/llm.md>), [RSS](<https://devfeed.tech/topics/rss.md>), [Python](<https://devfeed.tech/topics/python.md>), [Parsing](<https://devfeed.tech/topics/parsing.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [OpenAI](<https://devfeed.tech/topics/openai.md>)

Tags: [e-ink](<https://devfeed.tech/tags/e-ink.md>), [llm](<https://devfeed.tech/tags/llm.md>), [llms](<https://devfeed.tech/tags/llms.md>), [openai](<https://devfeed.tech/tags/openai.md>), [parsing](<https://devfeed.tech/tags/parsing.md>), [python](<https://devfeed.tech/tags/python.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [rss](<https://devfeed.tech/tags/rss.md>)

### AI overview

A hands-on project that uses a Raspberry Pico with an e-ink screen to fetch RSS feeds, call third-party LLM APIs, and generate formatted content. The author describes working within 8 KB of memory, parsing feeds character by character, and using MicroPython.

### Source excerpt

Generating Dr. Seuss headlines, fake WSJ quotes, HackerNews troll comments, and more.

## Introducing the PineNote

DevFeed: [Introducing the PineNote](<https://devfeed.tech/articles/introducing-the-pinenote-34846.md>)

Original publisher: [Read original article](<https://pine64.org/2021/08/15/introducing-the-pinenote/>)

Published: 2021-08-15T00:00:00Z

Content type: news

Language: en

Sources: [Community blog on PINE64](<https://devfeed.tech/sources/community-blog-on-pine64.md>)

Topics: [e-ink](<https://devfeed.tech/topics/e-ink.md>), [Single Board Computer](<https://devfeed.tech/topics/single-board-computer.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Pinephone](<https://devfeed.tech/topics/pinephone.md>)

Tags: [announcements](<https://devfeed.tech/tags/announcements.md>), [devices](<https://devfeed.tech/tags/devices.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [pinedio](<https://devfeed.tech/tags/pinedio.md>), [pinenote](<https://devfeed.tech/tags/pinenote.md>), [pinephone](<https://devfeed.tech/tags/pinephone.md>), [pinetime](<https://devfeed.tech/tags/pinetime.md>), [quartz64](<https://devfeed.tech/tags/quartz64.md>), [release](<https://devfeed.tech/tags/release.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>)

### AI overview

PINE64 announces the PineNote, a high-end e-ink device based on the Quartz64 single-board computer, with an RK3566 processor, 4GB of LPDDR4 RAM, 128GB of eMMC storage, a Wacom-compatible panel, and a planned $399 price. The community update also covers PinePhone keyboard production, hardware development, hosting infrastructure, and software updates.

### Source excerpt

This month brings news that many of you have been waiting years for - we're introducing the PineNote, a high-end e-ink device based on the powerful Quartz64 single board computer. But the good news doesn't end here, the PinePhone keyboard has entered production, developers have begun work on PinePhone's back cases, PineDio development is moving forward and we've seen a new firmware release for Pinebook Pro's touchpad. There's a lot of ground to cover this month, so let's get to it. You can watch the synopsis of this month's community update on YouTube (embedded below) as well as on Odysee and PeerTube. To stay up-to-date with PINE64 news make sure to subscribe to this blog (subscription widget at the bottom of the webpage), follow PINE64 Telegram News channel, the announcements channel in Discord as well as our Twitter and Mastodon. I'd like to thank JF, Alex (clover), Dylan (from postmarketOS), Peter (LinMob), Alfred (from UBports), Chris (kop316), Brian (33YN2), gamiee and PizzaLovingNerd for their contributions to this community update. N.B. Comments on the blog post need to be in English and follow our Community Rules and Code of Conduct. Note: This image preview protects your privacy. Click to load the video from the Google servers. Link to the video & Community update video summary by PizzaLovingNerd TL;DR Housekeeping: DHL sent all PinePhones to NZ, so we had to reship all orders (sorry for the delay) Housekeeping: Building a temporary cluster to complete and maintain hosting cluster; build log and updates incoming PineNote: Announcing the PineNote, one of the most powerful devices of its kind on the market PineNote: Quartz64 based; specs include - fast refresh e-ink panel with multiple frontlight settings, RK3566, 4GB LPDDR4 RAM and 128GB eMMC flash storage PineNote: Wacom panel compatible with many EMR pens: we will offer our own PineNote: Available this year for $399; early adopters batch includes EMR pen + magnetic cover (later sold separately) PinePhone

## Plotting patterns in music with a fantasy record player

DevFeed: [Plotting patterns in music with a fantasy record player](<https://devfeed.tech/articles/plotting-patterns-in-music-with-a-fantasy-record-player-21656.md>)

Original publisher: [Read original article](<https://www.windytan.com/2020/12/plotting-patterns-in-music-with-fantasy.html>)

Author: Oona Räisänen (noreply@blogger.com)

Published: 2020-12-08T21:42:00Z

Content type: article

Language: en

Sources: [Oona Räisänen](<https://devfeed.tech/sources/oona-raisanen.md>)

Topics: [Script](<https://devfeed.tech/topics/script.md>), [e-ink](<https://devfeed.tech/topics/e-ink.md>), [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [art](<https://devfeed.tech/tags/art.md>), [audio-media](<https://devfeed.tech/tags/audio-media.md>), [blender](<https://devfeed.tech/tags/blender.md>), [computer](<https://devfeed.tech/tags/computer.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [experiment](<https://devfeed.tech/tags/experiment.md>), [music](<https://devfeed.tech/tags/music.md>), [patterns](<https://devfeed.tech/tags/patterns.md>), [physics](<https://devfeed.tech/tags/physics.md>), [plotting](<https://devfeed.tech/tags/plotting.md>), [script](<https://devfeed.tech/tags/script.md>), [shower-thoughts](<https://devfeed.tech/tags/shower-thoughts.md>), [signal](<https://devfeed.tech/tags/signal.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

The article explores how a vinyl record's wavy surface pattern can reflect the tempo and beat structure of its music. It describes a script that plots FLAC amplitude into a tempo-based grid and discusses clearer patterns in quantized electronic, pop, and rock music, along with a 3D-rendered fantasy record-player experiment.

### Source excerpt

Back in April I bought a vinyl record that had a weird wavy pattern near the outer edge. I though I may have broken it somehow but couldn't even test this because I don't own a record player. *) But when I took a closer look at the pattern it seemed to somehow follow changes in the music. That doesn't look like damage at all. When I played the CD version it became clear: this was an artifact of the tempo of the electronic track (100 bpm) being a multiple of the rotational speed (33 1/3 rpm), and these were probably drum hits! My tweet sparked some interesting discussion and I've been pondering this ever since. Could we plot any song as a loop or grid based on its own tempo and see interesting patterns? (*) I know, it's a little odd. But I have a few unplayed vinyl records waiting for the day that I finally have the proper equipment. By the way, the song was Black Pink by RinneRadio from their wonderful album staRRk. I wrote a little script to do just this: to plot the amplitude of the FLAC into a grid with an adjustable width. The result looks very similar to the pattern on the vinyl surface! Note that this image is a "straightened out" version of the disc surface and it's showing three of those wavy patterns. The top edge corresponds to the outer edge of the vinyl. Later I wrote a little more ambitious plotter that shall be explained soon. Computer-conducted music gives best patterns After plotting several different songs against their own tempo like this it seemed that in addition to electronic music a lot of pop and rock has this type of a pattern, too. The most striking and clear patterns can be seen in music that makes use of drum samples in a quantized time base (aka. a drum machine): the same kick drum sample, for example, repeats four times in each bar, perfectly timed by a computer so that they align in phase. Somewhat similar patterns can be seen in live music that is played to a "click track": each band member hears a common computer-generated time signal