# ESP32-C6

ESP32-C6 is an ultra-low-power system-on-chip with a RISC-V single-core microprocessor, Wi-Fi 6, Bluetooth 5 LE, Zigbee, Thread, peripherals, and built-in security hardware.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Build a walkie-talkies with two ESP32 boards and ESP-NOW

DevFeed: [Build a walkie-talkies with two ESP32 boards and ESP-NOW](<https://devfeed.tech/articles/build-a-walkie-talkies-with-two-esp32-boards-and-esp-now-140777.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/build-a-walkie-talkies-with-two-esp32-boards-and-esp-now/>)

Author: Anne Barela

Published: 2026-11-18T15:35:54Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>)

Tags: [amoled](<https://devfeed.tech/tags/amoled.md>), [audio](<https://devfeed.tech/tags/audio.md>), [displays](<https://devfeed.tech/tags/displays.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [projects](<https://devfeed.tech/tags/projects.md>), [voice](<https://devfeed.tech/tags/voice.md>), [walkie-talkie](<https://devfeed.tech/tags/walkie-talkie.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>)

### AI overview

The project turns two ESP32 boards into push-to-talk walkie-talkies, sending voice directly over Espressif's low-power ESP-NOW protocol without a WiFi router. It uses Waveshare C6 Touch AMOLED 2.16 boards with microphones, speakers and external antenna connectors; the code was adapted from a gallery project by changing its board template. The touch interface displays signal strength, link status and battery information, and offers controls for volume, microphone sensitivity and screen brightness, as well as a way to forget a paired device. Other boards may work if they have a similarly sized screen, microphone and speaker. Only one person speaks at a time, using the screen or the board's boot button.

### Source excerpt

Julian Horsey writes at Geeky Gadgets about a project from Volos Projects that turns two ESP32 boards into walkie-talkies, sending voice audio over ESP-NOW. ESP-NOW is Espressif's low-power protocol that lets two boards talk directly without a WiFi router in between. The build uses Waveshare C6 Touch AMOLED 2.16 boards, which have a microphone, a [...]

## New Learn Guide: ESP-SDR on Metro ESP32-P4 #Hacks #AdafruitLearningSystem @Adafruit

DevFeed: [New Learn Guide: ESP-SDR on Metro ESP32-P4 #Hacks #AdafruitLearningSystem @Adafruit](<https://devfeed.tech/articles/new-learn-guide-esp-sdr-on-metro-esp32-p4-hacks-adafruitlearningsystem-adafruit-129521.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/11/new-learn-guide-esp-sdr-on-metro-esp32-p4-hacks-adafruitlearningsystem-adafruit/>)

Author: Adafruit Learning System

Published: 2026-11-11T18:24:38Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [fourier transform](<https://devfeed.tech/topics/fourier-transform.md>), [Learning](<https://devfeed.tech/topics/learning.md>)

Tags: [adafruit-learning-system](<https://devfeed.tech/tags/adafruit-learning-system.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [displays](<https://devfeed.tech/tags/displays.md>), [esp](<https://devfeed.tech/tags/esp.md>), [esp-sdr](<https://devfeed.tech/tags/esp-sdr.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [guide](<https://devfeed.tech/tags/guide.md>), [hacks](<https://devfeed.tech/tags/hacks.md>), [metro](<https://devfeed.tech/tags/metro.md>), [microwave](<https://devfeed.tech/tags/microwave.md>), [radio](<https://devfeed.tech/tags/radio.md>), [sdr](<https://devfeed.tech/tags/sdr.md>), [software-defined-radio](<https://devfeed.tech/tags/software-defined-radio.md>), [waterfall-display](<https://devfeed.tech/tags/waterfall-display.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

ESP-SDR uses undocumented functionality on the Metro ESP32-P4's ESP32-C6 co-processor to read raw I/Q radio data. The P4 runs CircuitPython and communicates with the C6 over UART; the C6 performs an FFT and sends signal statistics back for a CircuitPython waterfall visualization. Guide pages cover flashing the C6 and loading the P4 project.

### Source excerpt

The ESP-SDR project published a way to interact with undocumented functionality in many ESP32 chips that allows reading raw I/Q data. I/Q stands for In-Phase and Quadrature. It's a digitized arithmetic representation of radio signals captured over time. This page has a more detailed explanation of I/Q data with helpful graphics if you'd like to [...]

## M5Stack Core Matrix ESP32-C61 IoT controller features 16x16 LED matrix, WiFi 6, and 6-axis IMU

DevFeed: [M5Stack Core Matrix ESP32-C61 IoT controller features 16x16 LED matrix, WiFi 6, and 6-axis IMU](<https://devfeed.tech/articles/m5stack-core-matrix-esp32-c61-iot-controller-features-16-16-led-matrix-wifi-6-and-6-axis-imu-122734.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/09/m5stack-core-matrix-esp32-c61-iot-controller-features-16x16-led-matrix-wifi-6-and-6-axis-imu/>)

Author: Debashis Das

Published: 2026-11-09T00:00:44Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [animations](<https://devfeed.tech/tags/animations.md>), [applications](<https://devfeed.tech/tags/applications.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [audio](<https://devfeed.tech/tags/audio.md>), [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [board](<https://devfeed.tech/tags/board.md>), [bus](<https://devfeed.tech/tags/bus.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [card](<https://devfeed.tech/tags/card.md>), [controller](<https://devfeed.tech/tags/controller.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [imu](<https://devfeed.tech/tags/imu.md>), [iot](<https://devfeed.tech/tags/iot.md>), [led](<https://devfeed.tech/tags/led.md>), [led-matrix](<https://devfeed.tech/tags/led-matrix.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [matrix](<https://devfeed.tech/tags/matrix.md>), [no-code](<https://devfeed.tech/tags/no-code.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [video](<https://devfeed.tech/tags/video.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>)

### AI overview

The Core Matrix combines an ESP32-C61 (single-core RISC-V up to 160 MHz, WiFi 6 and Bluetooth LE 5.0) with a 16x16 monochrome LED matrix for icons, animations, status and notifications. It also includes a BMI270 six-axis IMU with interrupt wake-up, microSD slot, buzzer, buttons, and M5-Bus and Grove expansion interfaces. It can run from USB-C or an external 3.7 V battery; the package does not include a battery. The text reports 8.21 µA shutdown consumption and 128.06 mA under full load, both measured at 4.2 V. Arduino IDE and UIFlow2 are supported, with examples and libraries for the display, sensors, storage and power management. Compared with the original ATOM Matrix, this model has a larger 16x16 monochrome display instead of a 5x5 RGB matrix, and upgrades to an ESP32-C61 with WiFi 6.

### Source excerpt

M5Stack's Core Matrix is an ESP32-C61-based IoT controller with a 16x16 white LED matrix for displaying icons, animations, device status, and notifications. It supports 2.4 GHz WiFi 6 connectivity and is designed for IoT applications, sensor data monitoring, and interactive displays. It also includes a 6-axis BMI270 IMU, a microSD card slot, a passive buzzer, three user buttons, a power button, and a USB-C port. The board supports external modules and sensors through M5-Bus and Grove interfaces, with battery-power management circuitry that lets it run on either USB power or an external battery. M5Stack Core Matrix specifications: SoC - Espressif Systems ESP32-C61HR8 CPU - Single 32-bit RISC-V core clocked up to 160MHz Memory - 320KB SRAM, 8MB PSRAM Storage - 256KB ROM, 16MB QSPI flash Wireless - WiFi 6 and Bluetooth LE 5.0 Storage - microSD card slot Display - 16x16 white LED matrix (256 LEDs) driven by TM1680 Audio [...] The post M5Stack Core Matrix ESP32-C61 IoT controller features 16x16 LED matrix, WiFi 6, and 6-axis IMU appeared first on CNX Software - Embedded Systems News.

## IEEE 802.15.4 Wireshark sniffer with ESP chips

DevFeed: [IEEE 802.15.4 Wireshark sniffer with ESP chips](<https://devfeed.tech/articles/ieee-802-15-4-wireshark-sniffer-with-esp-chips-123752.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/11/zephyr-ieee802154-wireshark-sniffer/>)

Author: John Lee

Published: 2026-11-09T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [802.15.4](<https://devfeed.tech/topics/802-15-4.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-C5](<https://devfeed.tech/topics/esp32-c5.md>), [ESP32-H2](<https://devfeed.tech/topics/esp32-h2.md>), [communications](<https://devfeed.tech/topics/communications.md>), [zigbee](<https://devfeed.tech/topics/zigbee.md>)

Tags: [802-15-4](<https://devfeed.tech/tags/802-15-4.md>), [api](<https://devfeed.tech/tags/api.md>), [blog](<https://devfeed.tech/tags/blog.md>), [capture](<https://devfeed.tech/tags/capture.md>), [channel](<https://devfeed.tech/tags/channel.md>), [conf](<https://devfeed.tech/tags/conf.md>), [console](<https://devfeed.tech/tags/console.md>), [debugging](<https://devfeed.tech/tags/debugging.md>), [devkit](<https://devfeed.tech/tags/devkit.md>), [diagnostic](<https://devfeed.tech/tags/diagnostic.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [ieee](<https://devfeed.tech/tags/ieee.md>), [ieee-802-15-4](<https://devfeed.tech/tags/ieee-802-15-4.md>), [mac](<https://devfeed.tech/tags/mac.md>), [plugin](<https://devfeed.tech/tags/plugin.md>), [sniffer](<https://devfeed.tech/tags/sniffer.md>), [soc](<https://devfeed.tech/tags/soc.md>), [thread](<https://devfeed.tech/tags/thread.md>), [tutorial](<https://devfeed.tech/tags/tutorial.md>), [wireshark](<https://devfeed.tech/tags/wireshark.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The Zephyr sniffer sample turns supported Espressif SoCs (ESP32-H2, C6 and C5) into live IEEE 802.15.4 capture interfaces in Wireshark. It uses Zephyr's generic radio API in promiscuous receive mode, sends frame data and metadata as text over the shared console UART, and an extcap Python plugin converts the lines into IEEE 802.15.4 TAP pcap records. The plugin regenerates the FCS because the radio overwrites its received FCS bytes with RSSI and LQI; this value is not the checksum captured over the air. Since the radio rejects bad-CRC frames, the setup captures only valid frames and cannot inspect preamble or symbol timing. The UART queue drops frames rather than blocking the radio, and raising capture speed from the default 115200 to 921600 baud helps keep up with traffic. Wireshark settings control channel and baud rates; channel changes require stopping and restarting capture. The original ESP32 and ESP32-S lack the required radio.

### Source excerpt

Turn a Zephyr-powered Espressif SoC into an IEEE 802.15.4 sniffer and inspect captured Thread, Zigbee and plain 802.15.4 MAC frames live in Wireshark through a small extcap plugin.

## A Hackable Analog Phone System

DevFeed: [A Hackable Analog Phone System](<https://devfeed.tech/articles/a-hackable-analog-phone-system-111683.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/02/a-hackable-analog-phone-system/>)

Author: Zoe Skyforest

Published: 2026-11-02T09:00:29Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Network](<https://devfeed.tech/topics/network.md>)

Tags: [analog](<https://devfeed.tech/tags/analog.md>), [analog-telephone](<https://devfeed.tech/tags/analog-telephone.md>), [analog-telephony](<https://devfeed.tech/tags/analog-telephony.md>), [audio](<https://devfeed.tech/tags/audio.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [chip](<https://devfeed.tech/tags/chip.md>), [control](<https://devfeed.tech/tags/control.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [files](<https://devfeed.tech/tags/files.md>), [github](<https://devfeed.tech/tags/github.md>), [hack](<https://devfeed.tech/tags/hack.md>), [handset](<https://devfeed.tech/tags/handset.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [home-lab](<https://devfeed.tech/tags/home-lab.md>), [interface](<https://devfeed.tech/tags/interface.md>), [machine](<https://devfeed.tech/tags/machine.md>), [phone](<https://devfeed.tech/tags/phone.md>), [phone-hacks](<https://devfeed.tech/tags/phone-hacks.md>), [phones](<https://devfeed.tech/tags/phones.md>), [rotary-phone](<https://devfeed.tech/tags/rotary-phone.md>), [system](<https://devfeed.tech/tags/system.md>), [telephone](<https://devfeed.tech/tags/telephone.md>), [telephony](<https://devfeed.tech/tags/telephony.md>)

### AI overview

The Analog Redial restores basic landline functions for up to two old phones: dial tone, ringing, calls between phones, and answering machine use. It can route calls through a SIP server, and dial codes can control Home Assistant; settings are managed through a web interface. An ESP32-C6 and ES8388 audio chip power the system. An optional Bluetooth board lets an old phone serve as a handset for a modern smartphone. The project files are on GitHub, and a board house can assemble most of the hardware. These details come from the supplied excerpt.

### Source excerpt

Do you have old landline phones laying around the house, with touchtone buttons or rotary dials? Perhaps you'd like to do something with them! [Scott Dylewski] has built hardware to ...read more

## SCINTIX P4: An ESP32-P4 Compute Module for Raspberry Pi CM4/CM5 Carriers

DevFeed: [SCINTIX P4: An ESP32-P4 Compute Module for Raspberry Pi CM4/CM5 Carriers](<https://devfeed.tech/articles/scintix-p4-an-esp32-p4-compute-module-for-raspberry-pi-cm4-cm5-carriers-105440.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/10/scintix-p4-esp32-p4-compute-module/>)

Author: John Lee

Published: 2026-10-28T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [802.15.4](<https://devfeed.tech/topics/802-15-4.md>), [ESP-Brookesia](<https://devfeed.tech/topics/esp-brookesia.md>), [waveshare](<https://devfeed.tech/topics/waveshare.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [carrier](<https://devfeed.tech/tags/carrier.md>), [cm5](<https://devfeed.tech/tags/cm5.md>), [community-contribution](<https://devfeed.tech/tags/community-contribution.md>), [compute](<https://devfeed.tech/tags/compute.md>), [compute-module](<https://devfeed.tech/tags/compute-module.md>), [development](<https://devfeed.tech/tags/development.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [existing](<https://devfeed.tech/tags/existing.md>), [factor](<https://devfeed.tech/tags/factor.md>), [form](<https://devfeed.tech/tags/form.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [memory](<https://devfeed.tech/tags/memory.md>), [module](<https://devfeed.tech/tags/module.md>), [pi](<https://devfeed.tech/tags/pi.md>), [power](<https://devfeed.tech/tags/power.md>), [product](<https://devfeed.tech/tags/product.md>), [product-development](<https://devfeed.tech/tags/product-development.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>)

### AI overview

SCINTIX P4 packages an ESP32-P4 with 32 MB PSRAM, 32 MB NOR flash, power regulation and a 10/100 Ethernet PHY, plus an ESP32-C6 for Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4, in a Raspberry Pi CM4/CM5 footprint. This lets developers prototype on compatible off-the-shelf carriers or design a custom carrier without integrating the core MCU, memory and power circuitry from scratch. The module exposes MIPI display and camera interfaces, USB, microSD and GPIO, though carrier features such as HDMI and PCIe do not carry over. The guide uses ESP-IDF v6.0.1 for a USB-C Hello World flash and an Ethernet iperf example on a Raspberry Pi CM4 IO Board; the example README reports about 73 Mbit/s uplink and 79 Mbit/s downlink. GPIO assignments and shared signals impose pin-use constraints, and the product is described as in Crowd Supply pre-launch.

### Source excerpt

SCINTIX P4 is a module from RELOC designed to accelerate ESP32-P4 product development. It integrates memory, power regulation, multiprotocol wireless and an Ethernet PHY in the Raspberry Pi CM4/CM5 form factor, letting you reuse existing carrier hardware from prototype to production.

## The Adafruit Metro ESP32-P4 Hydra is an Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6, MIPI interfaces

DevFeed: [The Adafruit Metro ESP32-P4 Hydra is an Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6, MIPI interfaces](<https://devfeed.tech/articles/the-adafruit-metro-esp32-p4-hydra-is-an-arduino-uno-shaped-esp32-p4-esp32-c6-board-with-wifi-6-mipi-interfaces-100620.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/26/the-adafruit-metro-esp32-p4-hydra-is-an-arduino-uno-shaped-esp32-p4-esp32-c6-board-with-wifi-6-mipi-interfaces/>)

Author: Anne Barela

Published: 2026-10-26T15:50:24Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>)

Tags: [22](<https://devfeed.tech/tags/22.md>), [adafruit](<https://devfeed.tech/tags/adafruit.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-5-3](<https://devfeed.tech/tags/bluetooth-5-3.md>), [board](<https://devfeed.tech/tags/board.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [csi](<https://devfeed.tech/tags/csi.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [flash](<https://devfeed.tech/tags/flash.md>), [hydra](<https://devfeed.tech/tags/hydra.md>), [metro](<https://devfeed.tech/tags/metro.md>), [metro-esp32-p4-hydra](<https://devfeed.tech/tags/metro-esp32-p4-hydra.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [nor-flash](<https://devfeed.tech/tags/nor-flash.md>), [psram](<https://devfeed.tech/tags/psram.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>), [uno](<https://devfeed.tech/tags/uno.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>)

### AI overview

The Adafruit Metro ESP32-P4 Hydra pairs an ESP32-P4 with 16 MB of PSRAM and 16 MB of NOR flash, while an ESP32-C6 provides WiFi 6, Bluetooth 5.3 LE, Thread, and Zigbee. Its Raspberry Pi-format MIPI connectors support the 5-inch and 7-inch Raspberry Pi Touch Display 2 and OV5647-based Pi Zero-style camera modules; Camera Module 3 with IMX708 is not supported. Other features include USB 2.0 High-Speed host, microSD, STEMMA QT, and LiPo charging. It supports ESP-IDF and TinyUF2 USB firmware updates. CircuitPython support is in 11.0.0-alpha.2, with the ESP32-P4 port still in alpha; Arduino support is in progress. The text says the $34.95 board ships with ESP32-P4 v1 silicon, not the v3 ESP32-P4X revision.

### Source excerpt

Debashis Das writes at CNX Software about the Adafruit Metro ESP32-P4 Hydra, an Arduino UNO-shaped board built around the ESP32-P4 with 16MB of PSRAM and 16MB of NOR flash. An ESP32-C6 handles WiFi 6, Bluetooth 5.3 LE, Thread, and Zigbee. The MIPI DSI and CSI connectors use the Raspberry Pi 22-pin format with two data [...]

## Adafruit Metro ESP32-P4 Hydra - An Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6, MIPI interfaces

DevFeed: [Adafruit Metro ESP32-P4 Hydra - An Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6, MIPI interfaces](<https://devfeed.tech/articles/adafruit-metro-esp32-p4-hydra-an-arduino-uno-shaped-esp32-p4-esp32-c6-board-with-wifi-6-mipi-interfaces-100488.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/26/adafruit-metro-esp32-p4-hydra-an-arduino-uno-shaped-esp32-p4-esp32-c6-board-with-wifi-6-mipi-interfaces/>)

Author: Debashis Das

Published: 2026-10-26T09:00:37Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>)

Tags: [40-mhz](<https://devfeed.tech/tags/40-mhz.md>), [adafruit](<https://devfeed.tech/tags/adafruit.md>), [ai](<https://devfeed.tech/tags/ai.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [battery](<https://devfeed.tech/tags/battery.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-5-3](<https://devfeed.tech/tags/bluetooth-5-3.md>), [board](<https://devfeed.tech/tags/board.md>), [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [camera](<https://devfeed.tech/tags/camera.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hmi](<https://devfeed.tech/tags/hmi.md>), [hydra](<https://devfeed.tech/tags/hydra.md>), [interfaces](<https://devfeed.tech/tags/interfaces.md>), [iot](<https://devfeed.tech/tags/iot.md>), [metro](<https://devfeed.tech/tags/metro.md>), [metro-esp32-p4-hydra](<https://devfeed.tech/tags/metro-esp32-p4-hydra.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [uno](<https://devfeed.tech/tags/uno.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>)

### AI overview

The Metro ESP32-P4 Hydra pairs an ESP32-P4 with an ESP32-C6 wireless module in an Arduino UNO-shaped board. It provides 16MB PSRAM and flash, WiFi 6, Bluetooth LE 5.3, and 802.15.4 for Thread and Zigbee, though the latter may require additional firmware integration. Two-lane Raspberry Pi-format MIPI connectors support the Raspberry Pi Touch Display 2 and OV5647-based Zero-style cameras; the IMX708 Camera Module 3 is not supported. Other hardware includes a USB 2.0 High-Speed host port, microSD, UNO headers, STEMMA QT, and LiPo charging. Programming is supported through ESP-IDF and TinyUF2; CircuitPython support is in alpha, and Adafruit says Arduino support is in development. The board ships with the original ESP32-P4 v1 chipset, and the excerpt says detailed documentation was not available. Listed price: $34.95.

### Source excerpt

Adafruit has launched the Metro ESP32-P4 Hydra, an Arduino UNO-shaped development board with ESP32-P4, 16MB PSRAM, and 16MB NOR flash, and an ESP32-C6 for WiFi 6, Bluetooth 5.3 LE, Thread, and Zigbee connectivity. Other features include Raspberry Pi-compatible MIPI DSI and CSI interfaces, a USB 2.0 High-Speed host port, a microSD card slot, and Arduino UNO expansion headers. The board also includes a STEMMA QT connector, LiPo battery charging, and multiple power input options, making it suitable for HMI, camera, and IoT applications. Adafruit Metro ESP32-P4 Hydra specifications: Microcontroller - Espressif Systems ESP32-P4 (v1 chipset) CPU Dual-core 32-bit RISC-V HP (High-performance) CPU @ up to 360 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM Memory 768 KB HP L2MEM (for dual-core CPU), 32 KB LP SRAM, 8 KB TCM (for LP MCU core) 16MB PSRAM GPU [...] The post Adafruit Metro ESP32-P4 Hydra - An Arduino UNO-shaped ESP32-P4 + ESP32-C6 board with WiFi 6, MIPI interfaces appeared first on CNX Software - Embedded Systems News.

## LILYGO T-Halow P4 - A M.2 2280 board with ESP32-P4, WiFi HaLow, and ESP32-C6

DevFeed: [LILYGO T-Halow P4 - A M.2 2280 board with ESP32-P4, WiFi HaLow, and ESP32-C6](<https://devfeed.tech/articles/lilygo-t-halow-p4-a-m-2-2280-board-with-esp32-p4-wifi-halow-and-esp32-c6-97448.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/23/lilygo-t-halow-p4-a-m-2-2280-board-with-esp32-p4-wifi-halow-and-esp32-c6/>)

Author: Debashis Das

Published: 2026-10-23T09:00:19Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [LILYGO](<https://devfeed.tech/topics/lilygo.md>), [802.15.4](<https://devfeed.tech/topics/802-15-4.md>)

Tags: [802-11ah](<https://devfeed.tech/tags/802-11ah.md>), [802-15-4](<https://devfeed.tech/tags/802-15-4.md>), [ai](<https://devfeed.tech/tags/ai.md>), [applications](<https://devfeed.tech/tags/applications.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [board](<https://devfeed.tech/tags/board.md>), [camera](<https://devfeed.tech/tags/camera.md>), [cameras](<https://devfeed.tech/tags/cameras.md>), [carrier](<https://devfeed.tech/tags/carrier.md>), [codec](<https://devfeed.tech/tags/codec.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [csi](<https://devfeed.tech/tags/csi.md>), [development](<https://devfeed.tech/tags/development.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [displays](<https://devfeed.tech/tags/displays.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [halow](<https://devfeed.tech/tags/halow.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lilygo](<https://devfeed.tech/tags/lilygo.md>), [m-2](<https://devfeed.tech/tags/m-2.md>), [matter](<https://devfeed.tech/tags/matter.md>), [thread](<https://devfeed.tech/tags/thread.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wireless](<https://devfeed.tech/tags/wireless.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The LILYGO T-Halow P4 combines an ESP32-P4, ESP32-C6 wireless co-processor, and Taixin TX-AH WiFi HaLow module on an 80 x 22 mm M.2 2280 board. Its M.2 B-key connector exposes interfaces for custom carriers; it also has MIPI CSI camera and MIPI DSI display connectors and hardware H.264 encoding up to 1080p30. The HaLow module supports 859-894 MHz or 902-928 MHz variants, with stated line-of-sight range up to 1.2 km. LILYGO examples cover HaLow, camera, and display functions and require ESP-IDF 5.4.1 or newer; the module uses SPI for data and UART for AT commands. A browser-based Web Serial tool is available for configuration. The text reports conflicting PSRAM capacities: 32 MB in GitHub and wiki sources, versus 8 MB on the product page. Listed prices vary by store and version, from $26.57 at the official store to $36.98 on AliExpress.

### Source excerpt

LILYGO T-Halow P4 is a compact M.2 development board that combines an ESP32-P4 MCU, an ESP32-C6 wireless co-processor, and a Taixin TX-AH WiFi HaLow module for long-range wireless connectivity. The board measures just 80 x 22mm (M.2 2280) and uses an M.2 B-key connector to expose GPIO pins and other interfaces for integration into custom carrier boards. It also supports MIPI CSI cameras and MIPI DSI displays, along with hardware H.264 video encoding at up to 1080p30, making it suitable for compact IoT gateways, remote cameras, and industrial monitoring applications. LILYGO T-Halow P4 specifications: SoC - Espressif Systems ESP32-P4NRW32X CPU Dual-core RISC-V @ 400 MHz with AI instruction extensions and single-precision FPU Single-core RISC-V LP (low-power) MCU @ up to 40 MHz GPU - 2D Pixel Processing Accelerator (PPA) VPU - H.264 and JPEG codec support Memory - 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB [...] The post LILYGO T-Halow P4 - A M.2 2280 board with ESP32-P4, WiFi HaLow, and ESP32-C6 appeared first on CNX Software - Embedded Systems News.

## Still flipping through a dozen datasheets to pick an ESP chip? One page is enough

DevFeed: [Still flipping through a dozen datasheets to pick an ESP chip? One page is enough](<https://devfeed.tech/articles/still-flipping-through-a-dozen-datasheets-to-pick-an-esp-chip-one-page-is-enough-96511.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/10/esp32-chip-comparison-center/>)

Author: John Lee

Published: 2026-10-23T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-H2](<https://devfeed.tech/topics/esp32-h2.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>)

Tags: [application](<https://devfeed.tech/tags/application.md>), [blog](<https://devfeed.tech/tags/blog.md>), [board](<https://devfeed.tech/tags/board.md>), [capabilities](<https://devfeed.tech/tags/capabilities.md>), [chip](<https://devfeed.tech/tags/chip.md>), [chips](<https://devfeed.tech/tags/chips.md>), [clock](<https://devfeed.tech/tags/clock.md>), [comparison](<https://devfeed.tech/tags/comparison.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [datasheets](<https://devfeed.tech/tags/datasheets.md>), [demo](<https://devfeed.tech/tags/demo.md>), [design](<https://devfeed.tech/tags/design.md>), [details](<https://devfeed.tech/tags/details.md>), [developers](<https://devfeed.tech/tags/developers.md>), [development](<https://devfeed.tech/tags/development.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [e-series](<https://devfeed.tech/tags/e-series.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [overview](<https://devfeed.tech/tags/overview.md>), [product-selection](<https://devfeed.tech/tags/product-selection.md>), [web-app](<https://devfeed.tech/tags/web-app.md>)

### AI overview

Espressif's ESP32 Chip Comparison Center brings technical chip evaluation and board selection into one web tool. It shows a selected chip's capability summary, specification matrix, explanatory notes, and links to official documents. For two or more chips, it presents a side-by-side table with differences highlighted and supports Excel export. Users can filter chips by requirements such as interfaces, including USB speed, and compare remaining matches; application scenarios link to official demos and related hardware and software materials. A separate board selector filters official Espressif development boards by chip and functional or hardware needs, with specifications and supporting materials. The article distinguishes this technical evaluation tool from the ESP Product Selector, which also covers part numbers and commercial and lifecycle information.

### Source excerpt

Espressif chips now run from the ESP8266 and ESP32 through the S, C, H, P, and E series, and the details live in many datasheets. The Chip Comparison Center puts one chip's capabilities, side-by-side differences, requirement filters, application references, and matching development boards on a single page so you can choose a chip or a board faster.

## ESP32 As Your Raspberry Pi's Linux Wireless Co-processor

DevFeed: [ESP32 As Your Raspberry Pi's Linux Wireless Co-processor](<https://devfeed.tech/articles/esp32-as-your-raspberry-pi-s-linux-wireless-co-processor-66727.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/07/esp32-as-your-raspberry-pis-linux-wireless-co-processor/>)

Author: Arya Voronova

Published: 2026-10-07T14:00:06Z

Content type: tutorial

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [Esp-Hosted](<https://devfeed.tech/topics/esp-hosted.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Esp32 C2](<https://devfeed.tech/topics/esp32-c2.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C5](<https://devfeed.tech/topics/esp32-c5.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Linux Kernel](<https://devfeed.tech/topics/linux-kernel.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>)

Tags: [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [device-tree](<https://devfeed.tech/tags/device-tree.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [featured](<https://devfeed.tech/tags/featured.md>), [linux](<https://devfeed.tech/tags/linux.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [skills](<https://devfeed.tech/tags/skills.md>), [wifi-card](<https://devfeed.tech/tags/wifi-card.md>), [wireless](<https://devfeed.tech/tags/wireless.md>), [wireless-hacks](<https://devfeed.tech/tags/wireless-hacks.md>)

### AI overview

A practical guide to using ESP32 modules with esp-hosted as Wi-Fi and Bluetooth coprocessors for Linux single-board computers. It compares the MCU and Linux variants, covers SDIO or SPI wiring, firmware and driver setup, and notes limitations such as kernel upgrades requiring manual driver rebuilding. The author also describes possible uses for power switching and other wireless protocols.

### Source excerpt

A laptop with no wireless connectivity feels like a rarity - but when you shop for powerful Linux single-board computers (SBCs), it is pretty common to see one skimp on ...read more

## A 3D renderer for ESP32 ESP-IDF and Arduino

DevFeed: [A 3D renderer for ESP32 ESP-IDF and Arduino](<https://devfeed.tech/articles/a-3d-renderer-for-esp32-esp-idf-and-arduino-61175.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/09/28/a-3d-renderer-for-esp32-esp-idf-and-arduino/>)

Author: Anne Barela

Published: 2026-09-28T20:19:56Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-graphics](<https://devfeed.tech/tags/3d-graphics.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [c-plus-plus](<https://devfeed.tech/tags/c-plus-plus.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [freertos](<https://devfeed.tech/tags/freertos.md>), [graphics](<https://devfeed.tech/tags/graphics.md>), [performance](<https://devfeed.tech/tags/performance.md>)

### AI overview

A header-only C++17 renderer draws animated low-poly 3D models on ESP32 devices using software rendering. It supports ESP-IDF and Arduino, with reported performance varying by board and viewport size.

### Source excerpt

Eric (@0015) has published a3d on GitHub, a header-only C++17 renderer that draws animated low-poly 3D models on an ESP32 and pushes them to a panel. There is no GPU involved. Every triangle is set up, clipped, binned and filled in software by the same core running the application. A panel is five function pointers, [...]

## PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO

DevFeed: [PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO](<https://devfeed.tech/articles/pmsgtm-build-your-own-modular-smart-glasses-with-seeed-studio-xiao-59841.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/09/25/pmsg-modular-smart-glasses-xiao/>)

Author: Kezang Loday

Published: 2026-09-25T09:59:38Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [USB](<https://devfeed.tech/topics/usb.md>), [mesh networking](<https://devfeed.tech/topics/mesh-networking.md>)

Tags: [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [board](<https://devfeed.tech/tags/board.md>), [build](<https://devfeed.tech/tags/build.md>), [camera](<https://devfeed.tech/tags/camera.md>), [cameras](<https://devfeed.tech/tags/cameras.md>), [charging](<https://devfeed.tech/tags/charging.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [feature](<https://devfeed.tech/tags/feature.md>), [glasses](<https://devfeed.tech/tags/glasses.md>), [grove](<https://devfeed.tech/tags/grove.md>), [lora](<https://devfeed.tech/tags/lora.md>), [mesh-networking](<https://devfeed.tech/tags/mesh-networking.md>), [modular](<https://devfeed.tech/tags/modular.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [pmsg](<https://devfeed.tech/tags/pmsg.md>), [privacy](<https://devfeed.tech/tags/privacy.md>), [project-spotlight](<https://devfeed.tech/tags/project-spotlight.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [seeed-studio-xiao](<https://devfeed.tech/tags/seeed-studio-xiao.md>), [smart-glasses](<https://devfeed.tech/tags/smart-glasses.md>), [wearables](<https://devfeed.tech/tags/wearables.md>), [xiao](<https://devfeed.tech/tags/xiao.md>), [xiao-esp32-c6](<https://devfeed.tech/tags/xiao-esp32-c6.md>), [xiao-esp32-s3](<https://devfeed.tech/tags/xiao-esp32-s3.md>), [xiao-nrf52840-sense](<https://devfeed.tech/tags/xiao-nrf52840-sense.md>)

### AI overview

PMSG is an open, modular smart-glasses platform built around interchangeable Seeed Studio XIAO boards. The design includes a custom PCBA, Grove connectors, sensors, LEDs, haptic feedback, battery and USB-C charging, with the base version omitting a camera for privacy.

### Source excerpt

Commercial smart glasses tend to share three traits: they're expensive, they're closed, and they're full The post PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO appeared first on Latest News from Seeed Studio.

## Using Biopotential Sensors and an ESP32-C6 for Biosignal-Based Appliance Control

DevFeed: [Using Biopotential Sensors and an ESP32-C6 for Biosignal-Based Appliance Control](<https://devfeed.tech/articles/brain-control-your-appliance-sort-of-52662.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/09/18/brain-control-your-appliance-sort-of/>)

Author: Al Williams

Published: 2026-09-18T15:30:32Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [Hardware](<https://devfeed.tech/topics/hardware.md>), [Instrumentation](<https://devfeed.tech/topics/instrumentation.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [User Interfaces](<https://devfeed.tech/topics/user-interfaces.md>), [input](<https://devfeed.tech/topics/input.md>)

Tags: [adc](<https://devfeed.tech/tags/adc.md>), [analog](<https://devfeed.tech/tags/analog.md>), [brainwave](<https://devfeed.tech/tags/brainwave.md>), [eeg](<https://devfeed.tech/tags/eeg.md>), [emc](<https://devfeed.tech/tags/emc.md>), [eog](<https://devfeed.tech/tags/eog.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [input](<https://devfeed.tech/tags/input.md>), [instrumentation](<https://devfeed.tech/tags/instrumentation.md>), [interaction](<https://devfeed.tech/tags/interaction.md>), [interfaces](<https://devfeed.tech/tags/interfaces.md>), [labs](<https://devfeed.tech/tags/labs.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [neuro-playground](<https://devfeed.tech/tags/neuro-playground.md>), [science](<https://devfeed.tech/tags/science.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [signal](<https://devfeed.tech/tags/signal.md>), [signal-processing](<https://devfeed.tech/tags/signal-processing.md>), [transceiver](<https://devfeed.tech/tags/transceiver.md>), [user-interfaces](<https://devfeed.tech/tags/user-interfaces.md>)

### AI overview

The Neuro PlayGround Lite combines a three-channel instrumentation amplifier, ADC, and ESP32-C6 radio to measure biological signals such as EEG, EMG, ECG, and EOG. The article describes using blink or muscle signals with an IR transceiver to control appliances.

### Source excerpt

We aren't sure we subscribe to [Upside Down Labs] description that their Neuro PlayGround Lite (NPG Lite) actually constitutes brain control in the science fiction sense. However, the package can ...read more

## Intelligent Robotic Arm Design Based on ESP32-P4 for Industrial Applications

DevFeed: [Intelligent Robotic Arm Design Based on ESP32-P4 for Industrial Applications](<https://devfeed.tech/articles/intelligent-robotic-arm-design-based-on-esp32-p4-for-industrial-applications-13742.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/01/esp32p4-robotic-arm-design/>)

Author: John Lee

Published: 2026-01-12T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [Robotics](<https://devfeed.tech/topics/robotics.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [blog](<https://devfeed.tech/tags/blog.md>), [esp-dl](<https://devfeed.tech/tags/esp-dl.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [kinematics](<https://devfeed.tech/tags/kinematics.md>), [protocol](<https://devfeed.tech/tags/protocol.md>), [robotic-arm](<https://devfeed.tech/tags/robotic-arm.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [usb](<https://devfeed.tech/tags/usb.md>), [visual-detection](<https://devfeed.tech/tags/visual-detection.md>)

### AI overview

A detailed guide to building an independently controllable robotic arm with the ESP32-P4. It covers onboard kinematics, USB-camera-based color detection, remote control over ESP-NOW, mechanical assembly, motor configuration, vision calibration, and system integration.

### Source excerpt

This article demonstrates how to implement an independently controllable robotic arm project based on the ESP32-P4 high-performance MCU. It covers complete kinematics, visual detection, and remote control, showcasing the great potential of ESP32-P4 in industrial applications.

## Integrating External Libraries into NuttX Applications

DevFeed: [Integrating External Libraries into NuttX Applications](<https://devfeed.tech/articles/integrating-external-libraries-into-nuttx-applications-13735.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/11/nuttx-external-lib/>)

Author: John Lee

Published: 2025-11-19T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [NuttX](<https://devfeed.tech/topics/nuttx.md>), [Library](<https://devfeed.tech/topics/library.md>), [Simulation](<https://devfeed.tech/topics/simulation.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [x86](<https://devfeed.tech/topics/x86.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [compilation](<https://devfeed.tech/tags/compilation.md>), [cross-compilation](<https://devfeed.tech/tags/cross-compilation.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [guide](<https://devfeed.tech/tags/guide.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [libraries](<https://devfeed.tech/tags/libraries.md>), [library](<https://devfeed.tech/tags/library.md>), [nuttx](<https://devfeed.tech/tags/nuttx.md>), [practitioner](<https://devfeed.tech/tags/practitioner.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [simulation](<https://devfeed.tech/tags/simulation.md>), [x86](<https://devfeed.tech/tags/x86.md>)

### AI overview

This guide explains how to integrate an external application library into NuttX using a static library and cross-compilation. It covers building the library on x86, testing it in the NuttX simulation environment, and cross-compiling it for RISC-V to run on the ESP32-C6.

### Source excerpt

This guide demonstrates how to integrate external libraries into NuttX applications using static libraries and cross-compilation. Learn how to build a library on x86, integrate it into the NuttX simulation environment, and cross-compile for RISC-V targets like the ESP32-C6, all without moving your entire codebase into the NuttX directory structure.

## Building Hardware-Enforced Trust into Matter Devices with ESP-TEE

DevFeed: [Building Hardware-Enforced Trust into Matter Devices with ESP-TEE](<https://devfeed.tech/articles/building-hardware-enforced-trust-into-matter-devices-with-esp-tee-13724.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/09/matter_w_esp_tee_c6/>)

Author: John Lee

Published: 2025-09-12T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Matter](<https://devfeed.tech/topics/matter.md>), [trusted-execution-environment](<https://devfeed.tech/topics/trusted-execution-environment.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [Internet of things](<https://devfeed.tech/topics/iot.md>), [Security](<https://devfeed.tech/topics/security.md>)

Tags: [attestation](<https://devfeed.tech/tags/attestation.md>), [blog](<https://devfeed.tech/tags/blog.md>), [esp-tee](<https://devfeed.tech/tags/esp-tee.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [iot](<https://devfeed.tech/tags/iot.md>), [matter](<https://devfeed.tech/tags/matter.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [security](<https://devfeed.tech/tags/security.md>), [verification](<https://devfeed.tech/tags/verification.md>)

### AI overview

This article explains how Espressif's ESP-TEE framework integrates with Matter on ESP32-C6 RISC-V SoCs. It describes hardware-isolated protection for device credentials, cryptographic operations, secure storage, OTA updates, attestation, and Matter DAC and NOC keys.

### Source excerpt

As security expectations rise globally - driven by region-specific cybersecurity regulations - safeguarding device credentials has become critical for IoT manufacturers. This article explains how the ESP-TEE framework integrates with Matter and demonstrates building secure products using the Espressif RISC-V SoCs, showcasing hardware-enforced security that can resist scalable remote software attacks.

## Comparing ADC Performance of Espressif SoCs

DevFeed: [Comparing ADC Performance of Espressif SoCs](<https://devfeed.tech/articles/comparing-adc-performance-of-espressif-socs-13716.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/08/adc-performance/>)

Author: John Lee

Published: 2025-08-26T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [Security Operations Center](<https://devfeed.tech/topics/security-operations-center.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C5](<https://devfeed.tech/topics/esp32-c5.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [Esp32 S2](<https://devfeed.tech/topics/esp32-s2.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Programming](<https://devfeed.tech/topics/programming.md>), [Algorithms](<https://devfeed.tech/topics/algorithms.md>)

Tags: [adc](<https://devfeed.tech/tags/adc.md>), [algorithms](<https://devfeed.tech/tags/algorithms.md>), [article](<https://devfeed.tech/tags/article.md>), [blog](<https://devfeed.tech/tags/blog.md>), [developers](<https://devfeed.tech/tags/developers.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [esp32-c5](<https://devfeed.tech/tags/esp32-c5.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esp32-s2](<https://devfeed.tech/tags/esp32-s2.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [performance](<https://devfeed.tech/tags/performance.md>), [peripheral](<https://devfeed.tech/tags/peripheral.md>), [soc](<https://devfeed.tech/tags/soc.md>), [software](<https://devfeed.tech/tags/software.md>)

### AI overview

This article compares ADC specifications, accuracy, and calibration approaches across Espressif SoCs. It explains ESP-IDF line-fitting and curve-fitting calibration schemes and discusses how calibration can improve ADC readings, while noting that custom schemes may not work consistently across chips in mass production.

### Source excerpt

This article compares the Analog-to-Digital Converter (ADC) performance of different Espressif SoCs and shows the techniques to improve the ADC accuracy using software calibration. The results should help developers choose the most suitable SoC and optimize it for their application's accuracy and voltage range requirements.

## NuttX for Motor Control and Sensing: IMU Integration and Wireless Data Streaming

DevFeed: [NuttX for Motor Control and Sensing: IMU Integration and Wireless Data Streaming](<https://devfeed.tech/articles/nuttx-for-motor-control-and-sensing-imu-integration-and-wireless-data-streaming-13714.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/07/nuttx-motor-control-and-sensing-data-trans/>)

Author: John Lee

Published: 2025-07-04T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [NuttX](<https://devfeed.tech/topics/nuttx.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Streaming](<https://devfeed.tech/topics/streaming.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>)

Tags: [apache](<https://devfeed.tech/tags/apache.md>), [blog](<https://devfeed.tech/tags/blog.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [imu](<https://devfeed.tech/tags/imu.md>), [motor](<https://devfeed.tech/tags/motor.md>), [nuttx](<https://devfeed.tech/tags/nuttx.md>), [sensor](<https://devfeed.tech/tags/sensor.md>), [streaming](<https://devfeed.tech/tags/streaming.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

This tutorial extends a NuttX motor-control system on the ESP32-C6 with MPU6050 IMU integration for vibration measurement and wireless sensor-data streaming over Wi-Fi to a host computer for visualization and analysis.

### Source excerpt

This article extends the NuttX motor control system with inertial measurement unit (IMU) sensor integration for vibration measurement and wireless data streaming capabilities using the ESP32-C6 Wi-Fi connectivity.

## ESPHome 2025.6.0: ESP-IDF 5.3.2, OpenThread, and new ESP32 variants

DevFeed: [ESPHome 2025.6.0: ESP-IDF 5.3.2, OpenThread, and new ESP32 variants](<https://devfeed.tech/articles/esphome-2025-6-0-esp-idf-5-3-2-openthread-and-new-esp32-variants-16698.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/06/18/esphome-2025-6/>)

Author: Jesse Hills

Published: 2025-06-18T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [releases](<https://devfeed.tech/topics/releases.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-H2](<https://devfeed.tech/topics/esp32-h2.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [Python](<https://devfeed.tech/topics/python.md>)

Tags: [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-h2](<https://devfeed.tech/tags/esp32-h2.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [python-3-10](<https://devfeed.tech/tags/python-3-10.md>), [releases](<https://devfeed.tech/tags/releases.md>)

### AI overview

ESPHome 2025.6.0 updates ESP-IDF to 5.3.2, adds official support for ESP32-C6, ESP32-H2, and ESP32-P4, introduces basic OpenThread support, and requires Python 3.10 or newer.

### Source excerpt

ESPHome 2025.6.0 updates ESP-IDF to 5.3.2, adds official support for the ESP32-C6, ESP32-H2 and ESP32-P4, introduces basic OpenThread support, and now requires Python 3.10 or newer.

## Debugging with ESP-IDF VS Code extension: Part 1

DevFeed: [Debugging with ESP-IDF VS Code extension: Part 1](<https://devfeed.tech/articles/debugging-with-esp-idf-vs-code-extension-part-1-13699.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/05/debugging-with-vscode/>)

Author: John Lee

Published: 2025-05-20T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [debugging](<https://devfeed.tech/topics/debugging.md>), [VS Code Extension](<https://devfeed.tech/topics/vscode-extension.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [Espressif](<https://devfeed.tech/topics/espressif.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [debugging](<https://devfeed.tech/tags/debugging.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [guide](<https://devfeed.tech/tags/guide.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [jtag](<https://devfeed.tech/tags/jtag.md>), [vs-code](<https://devfeed.tech/tags/vs-code.md>)

### AI overview

This first part of a two-part guide explains how to set up debugging for Espressif devices in Visual Studio Code with the ESP-IDF Extension. It covers debugging concepts, required hardware, JTAG and USB connection paths, the associated tools, and starting the openOCD server.

### Source excerpt

This two-part guide shows how to set up VS Code with the ESP-IDF extension to debug Espressif boards using JTAG. This first part covers the debugging process, hardware setup and connections, and starting the openOCD server.

## NuttX for Motor Control and Sensing: MCPWM and DC Motor Control

DevFeed: [NuttX for Motor Control and Sensing: MCPWM and DC Motor Control](<https://devfeed.tech/articles/nuttx-for-motor-control-and-sensing-mcpwm-and-dc-motor-control-13703.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/05/nuttx-motor-control-and-sensing/>)

Author: John Lee

Published: 2025-05-16T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [NuttX](<https://devfeed.tech/topics/nuttx.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [real-time](<https://devfeed.tech/topics/real-time.md>), [Application Development](<https://devfeed.tech/topics/application-development.md>), [software-development](<https://devfeed.tech/topics/software-development.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>)

Tags: [acquisition](<https://devfeed.tech/tags/acquisition.md>), [apache](<https://devfeed.tech/tags/apache.md>), [application-development](<https://devfeed.tech/tags/application-development.md>), [blog](<https://devfeed.tech/tags/blog.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [how-to](<https://devfeed.tech/tags/how-to.md>), [implement](<https://devfeed.tech/tags/implement.md>), [imu](<https://devfeed.tech/tags/imu.md>), [measurement](<https://devfeed.tech/tags/measurement.md>), [motor](<https://devfeed.tech/tags/motor.md>), [nuttx](<https://devfeed.tech/tags/nuttx.md>), [real-time](<https://devfeed.tech/tags/real-time.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [speed](<https://devfeed.tech/tags/speed.md>)

### AI overview

This tutorial demonstrates motor control and speed sensing on an ESP32-C6 using the NuttX RTOS. It covers MCPWM-based DC motor control, ADC-based potentiometer input, and quadrature encoder speed measurement, with the broader project intended to support wireless sensor data logging and analysis.

### Source excerpt

This article demonstrates how to implement motor control and speed sensing on an ESP32-C6 using NuttX RTOS. It covers setting up MCPWM for motor control, ADC for potentiometer reading, and quadrature encoder for speed measurement. The implementation showcases NuttX's real-time capabilities through a practical example using common peripherals and sensors.

## Building low power applications on Espressif chips: Ultra-Low-Power (ULP) coprocessor

DevFeed: [Building low power applications on Espressif chips: Ultra-Low-Power (ULP) coprocessor](<https://devfeed.tech/articles/building-low-power-applications-on-espressif-chips-ultra-low-power-ulp-coprocessor-13698.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/04/ulp-lp-core-get-started/>)

Author: John Lee

Published: 2025-04-02T06:05:59Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [Tutorial](<https://devfeed.tech/topics/tutorial.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Programming](<https://devfeed.tech/topics/programming.md>)

Tags: [battery](<https://devfeed.tech/tags/battery.md>), [blog](<https://devfeed.tech/tags/blog.md>), [boot](<https://devfeed.tech/tags/boot.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [lp-core](<https://devfeed.tech/tags/lp-core.md>), [programming](<https://devfeed.tech/tags/programming.md>), [ulp](<https://devfeed.tech/tags/ulp.md>)

### AI overview

This article introduces Ultra-Low-Power coprocessors in Espressif chips and presents a tutorial for using them to reduce application power consumption. It focuses on the LP-Core available on the ESP32-C6 and uses ESP-IDF v5.4.

### Source excerpt

In this article, we'll start with a quick overview of Ultra Low Power coprocessors (ULPs) in Espressif chips and how they can significantly reduce power consumption in your applications. Then, we'll walk through a tutorial on how to use ULPs in practice!

## Espressif part numbers explained: A complete guide - Modules

DevFeed: [Espressif part numbers explained: A complete guide - Modules](<https://devfeed.tech/articles/espressif-part-numbers-explained-a-complete-guide-modules-13687.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2025/03/espressif-part-numbers-explained/>)

Author: John Lee

Published: 2025-03-19T00:00:00Z

Content type: tutorial

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [Espressif](<https://devfeed.tech/topics/espressif.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Security Operations Center](<https://devfeed.tech/topics/security-operations-center.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C5](<https://devfeed.tech/topics/esp32-c5.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [Esp32 S2](<https://devfeed.tech/topics/esp32-s2.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [ble](<https://devfeed.tech/tags/ble.md>), [blog](<https://devfeed.tech/tags/blog.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [esp32-h2](<https://devfeed.tech/tags/esp32-h2.md>), [esp32-s2](<https://devfeed.tech/tags/esp32-s2.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [guide](<https://devfeed.tech/tags/guide.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [projects](<https://devfeed.tech/tags/projects.md>), [soc](<https://devfeed.tech/tags/soc.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>)

### AI overview

A guide to Espressif module part numbers, covering SoC series, module types, memory options, antenna versions, and versioning. It explains how these naming components relate to module specifications and hardware selection.

### Source excerpt

This article clarifies Espressif's SoC series, module types, memory options, antenna versions, and versioning.. It also explains why modules like WROOM and MINI are among Espressif's most popular products. After reading the article, developers should be able to confidently select the right hardware for their projects. Espressif offers a wide range of Systems-on-Chip (SoCs) and modules, continually expanding its product lineup with new offerings while refining existing ones with each revision.

[Next page](<https://devfeed.tech/topics/esp32-c6.md?cursor=WyIyMDI1LTAzLTE5VDAwOjAwOjAwKzAwOjAwIiwgIjlmMTkxYWMzLWEwOWQtNDk5Mi05NWE0LWRjNmY3YjQwODViYyJd>)