# ESP32-S3

ESP32-S3 is a dual-core Xtensa LX7 microcontroller system-on-chip with Wi-Fi, Bluetooth 5 (LE), programmable GPIOs, peripherals, security features, and support through Espressif's ESP-IDF platform.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## An ESP32-S3 front panel for SPDIF

DevFeed: [An ESP32-S3 front panel for SPDIF](<https://devfeed.tech/articles/an-esp32-s3-front-panel-for-spdif-141293.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/18/an-esp32-s3-front-panel-for-spdif/>)

Author: Anne Barela

Published: 2026-11-18T22:54:55Z

Content type: release

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [audio](<https://devfeed.tech/tags/audio.md>), [control-panel](<https://devfeed.tech/tags/control-panel.md>), [dspi](<https://devfeed.tech/tags/dspi.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [labs](<https://devfeed.tech/tags/labs.md>), [link](<https://devfeed.tech/tags/link.md>), [music](<https://devfeed.tech/tags/music.md>), [panel](<https://devfeed.tech/tags/panel.md>), [processor](<https://devfeed.tech/tags/processor.md>), [s-pdif](<https://devfeed.tech/tags/s-pdif.md>), [sound](<https://devfeed.tech/tags/sound.md>), [source](<https://devfeed.tech/tags/source.md>), [spdif](<https://devfeed.tech/tags/spdif.md>), [version](<https://devfeed.tech/tags/version.md>)

### AI overview

Weeb Labs' DSPi front panel firmware v1.5.0 runs on an ESP32-S3 as a control panel and music source for the DSPi processor. It sends 24-bit, 44.1 or 48 kHz audio over a short, single-wire 3.3 V GPIO-level S/PDIF connection to the Pico's GPIO5 input, rather than consumer coaxial or optical gear. Music comes from microSD or up to four SMB shares; features include browsing, artwork, seeking, presets, EQ and crossover editors, BLE remote support, and display visualizations. User Volume controls listening level and loudness compensation; Master Volume attenuates all audio without changing it. Installation starts with a full USB image; later updates use the panel's local WiFi page and retain pairings, mappings, presets, and screen settings. That page also transfers music at about 0.45-0.60 MB/s.

### Source excerpt

Weeb Labs has released version 1.5.0 of the DSPi ESP32 front panel firmware on GitHub. It runs on an ESP32-S3 and acts as the control panel and music source for a WeebLabs DSPi digital signal processor. Audio goes to the DSPi over a single-wire S/PDIF link at 24-bit, 44.1 or 48 kHz. That link is [...]

## A Japanese speech synthesis library that runs on an ESP32-S3 using Arduino

DevFeed: [A Japanese speech synthesis library that runs on an ESP32-S3 using Arduino](<https://devfeed.tech/articles/a-japanese-speech-synthesis-library-that-runs-on-an-esp32-s3-using-arduino-137900.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/17/a-japanese-speech-synthesis-library-that-runs-on-an-esp32-s3-using-arduino/>)

Author: Anne Barela

Published: 2026-11-17T16:18:08Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Speech Processing](<https://devfeed.tech/topics/speech-processing.md>), [Library](<https://devfeed.tech/topics/library.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>)

Tags: [amplifier](<https://devfeed.tech/tags/amplifier.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [arduino-ide](<https://devfeed.tech/tags/arduino-ide.md>), [audio](<https://devfeed.tech/tags/audio.md>), [board](<https://devfeed.tech/tags/board.md>), [bus](<https://devfeed.tech/tags/bus.md>), [dac](<https://devfeed.tech/tags/dac.md>), [download](<https://devfeed.tech/tags/download.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [evaluation](<https://devfeed.tech/tags/evaluation.md>), [example](<https://devfeed.tech/tags/example.md>), [github](<https://devfeed.tech/tags/github.md>), [i2s](<https://devfeed.tech/tags/i2s.md>), [japanese](<https://devfeed.tech/tags/japanese.md>), [library](<https://devfeed.tech/tags/library.md>), [projects](<https://devfeed.tech/tags/projects.md>), [sketch](<https://devfeed.tech/tags/sketch.md>), [speech](<https://devfeed.tech/tags/speech.md>), [speech-synthesis](<https://devfeed.tech/tags/speech-synthesis.md>), [text](<https://devfeed.tech/tags/text.md>), [voice](<https://devfeed.tech/tags/voice.md>), [voicevox](<https://devfeed.tech/tags/voicevox.md>)

### AI overview

MakoTalk 2.1.2 synthesizes Japanese speech offline on an ESP32-S3: an Arduino sketch supplies kana, selects a voice dictionary, configures I2S pins, and calls mspeak() to play audio. The library installs from a ZIP in the Arduino IDE; its MinimalSpeak example speaks at startup and again after reset. The default Zundamon voice uses 123 sound segments. On a 4MB board with the Default partition, the app has about 1.2MB, too little for the roughly 1.56MB sample. The software terms allow personal study and non-commercial sharing with credit, but commercial use--including evaluation and prototyping--requires prior permission; the voice data has separate terms that request credit in distributions, writeups, and videos.

### Source excerpt

MakoTalk, from airuyoshii-ai, is a Japanese speech synthesis library that runs on an ESP32-S3. Text goes in as kana, the Japanese phonetic script, and audio comes out over I2S, the digital audio bus used by small DAC and amplifier boards. A sketch loads the library, picks a voice dictionary, sets the I2S pins, then calls [...]

## An open-source ESP32-S3 robot brings AI to the desktop

DevFeed: [An open-source ESP32-S3 robot brings AI to the desktop](<https://devfeed.tech/articles/an-open-source-esp32-s3-robot-brings-ai-to-the-desktop-136131.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/16/an-open-source-esp32-s3-robot-brings-ai-to-the-desktop/>)

Author: Anne Barela

Published: 2026-11-16T20:13:00Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [ai](<https://devfeed.tech/tags/ai.md>), [apache-2-0](<https://devfeed.tech/tags/apache-2-0.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [c-plus-plus](<https://devfeed.tech/tags/c-plus-plus.md>), [cloud](<https://devfeed.tech/tags/cloud.md>), [desktop](<https://devfeed.tech/tags/desktop.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [imu](<https://devfeed.tech/tags/imu.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [motion](<https://devfeed.tech/tags/motion.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [robot](<https://devfeed.tech/tags/robot.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [servo](<https://devfeed.tech/tags/servo.md>), [uart](<https://devfeed.tech/tags/uart.md>), [voice-commands](<https://devfeed.tech/tags/voice-commands.md>)

### AI overview

RIG-TARS is a 3D-printable desktop robot built around an ESP32-S3. Three serial servos move its segmented body, while a six-axis IMU provides motion and tilt data; a screen, microphone, and speaker support interaction. The ESP32-S3 detects the wake word locally, but speech recognition and synthesis run in the cloud. Its C++ RIG-Omni firmware supports Bluetooth LE control, over-the-air updates, and Model Context Protocol tools, and one codebase serves four hardware variants: TARS, a robotic arm, a balancing robot, and a robot dog. The firmware is Apache 2.0 licensed; the electronics kit costs $99, with the shell printed separately from repository design files.

### Source excerpt

Ananthu Ashok writes at Open Source For You about RIG-TARS, a 3D-printable desktop robot from LuwuDynamics built around an ESP32-S3 microcontroller. Its body is split into three segments that walk and turn on voice commands. Three SCS009 serial servos move the segments over UART, and a six-axis QMI8658C IMU, a chip that senses motion and [...]

## $69 Home Assistant Connect AUX-2 controller offers PoE, audio streaming, RS-232 control, Bluetooth proxy, and more

DevFeed: [$69 Home Assistant Connect AUX-2 controller offers PoE, audio streaming, RS-232 control, Bluetooth proxy, and more](<https://devfeed.tech/articles/69-home-assistant-connect-aux-2-controller-offers-poe-audio-streaming-rs-232-control-bluetooth-proxy-and-more-134634.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/16/69-home-assistant-connect-aux-2-offers-poe-audio-streaming-rs-232-control-bluetooth-proxy/>)

Author: Debashis Das

Published: 2026-11-16T00:00:38Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>)

Tags: [audio](<https://devfeed.tech/tags/audio.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [controller](<https://devfeed.tech/tags/controller.md>), [dac](<https://devfeed.tech/tags/dac.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [grove](<https://devfeed.tech/tags/grove.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [home-assistant-connect-aux-2](<https://devfeed.tech/tags/home-assistant-connect-aux-2.md>), [home-automation](<https://devfeed.tech/tags/home-automation.md>), [iot](<https://devfeed.tech/tags/iot.md>), [modbus](<https://devfeed.tech/tags/modbus.md>), [music](<https://devfeed.tech/tags/music.md>), [poe](<https://devfeed.tech/tags/poe.md>), [serial](<https://devfeed.tech/tags/serial.md>), [smart-home](<https://devfeed.tech/tags/smart-home.md>), [streaming](<https://devfeed.tech/tags/streaming.md>), [texas-instruments](<https://devfeed.tech/tags/texas-instruments.md>), [usb](<https://devfeed.tech/tags/usb.md>), [video](<https://devfeed.tech/tags/video.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>), [z-wave](<https://devfeed.tech/tags/z-wave.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The $68.90 Home Assistant Connect AUX-2 combines audio output, RS-232 control, Bluetooth proxy, and expansion in an ESP32-S3 controller that connects over Wi-Fi or Ethernet with 802.3af PoE. Its DAC supports analog or optical S/PDIF output, and Music Assistant with Sendspin enables synchronized multi-room playback; it outputs audio but does not stream Bluetooth audio. Two serial ports, USB host, and a Grove connector extend device and sensor integration. It runs ESPHome and connects to Home Assistant over an encrypted link. Z-Wave and Zigbee/Thread adapters have different support: ZWA-2 is supported, while ZBT-2 Zigbee support is experimental and limited to ZHA on Home Assistant 2026.11 or later; Zigbee2MQTT and Thread are unsupported through AUX-2. Power supplies, cables, and optional wireless adapters are sold separately.

### Source excerpt

Nabu Casa has launched the Home Assistant Connect AUX-2, an ESP32-S3-based smart home controller that combines audio streaming, RS-232 serial control, Bluetooth LE proxy, and USB expansion for Z-Wave connectivity. It is designed for older audio systems, TVs, AV receivers, UPSs, solar inverters, and other devices to integrate into Home Assistant without cloud services. More specifically, the device features a Texas Instruments PCM5122 DAC for analog and optical audio output, two RS-232 ports, a USB-A port, and a Grove connector for additional sensors. It also supports 2.4 GHz Wi-Fi and Ethernet with 802.3af Power over Ethernet (PoE), so you can install it away from the main Home Assistant server. Home Assistant Connect AUX-2 specifications: SoC - Espressif ESP32-S3R8 dual-core Tensilica LX7 MCU up to 240 MHz with WiFi and Bluetooth LE wireless connectivity Connectivity Wireless - 2.4 GHz Wi-Fi 4 (802.11b/g/n), Bluetooth 5 LE Ethernet - 10/100 Mbps RJ45 port [...] The post $69 Home Assistant Connect AUX-2 controller offers PoE, audio streaming, RS-232 control, Bluetooth proxy, and more appeared first on CNX Software - Embedded Systems News.

## X Window System on the ESP32

DevFeed: [X Window System on the ESP32](<https://devfeed.tech/articles/x-window-system-on-the-esp32-133479.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/13/x-window-system-on-the-esp32/>)

Author: Tyler August

Published: 2026-11-14T00:00:18Z

Content type: news

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Claude](<https://devfeed.tech/topics/claude.md>)

Tags: [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [llm-assisted-project](<https://devfeed.tech/tags/llm-assisted-project.md>), [software-hacks](<https://devfeed.tech/tags/software-hacks.md>), [x](<https://devfeed.tech/tags/x.md>), [x-server](<https://devfeed.tech/tags/x-server.md>), [x11](<https://devfeed.tech/tags/x11.md>)

### AI overview

Woodland X11 ports the core X server to an ESP32-S3, demonstrated on Elecrow's CrowPanel Advance 4.3-inch display (800x480 RGB565, GT911 touch). The port has no extensions and is currently targeted specifically at that device. Touch acts as the X cursor, with two-finger scrolling but no keyboard. The demo runs xclock, xcalc, and xeyes; the excerpt suggests Linux applications could be displayed over WiFi or a wired connection, but does not describe setup or broader compatibility.

### Source excerpt

There are a lot of things you can do with an Xserver, but run it on a microcontroller? Well, if that microcontroller is an ESP32-S3, [Sergey Zorin]- and Claude- have ...read more

## Using a Toothbrush's NFC chip to Unlock a Computer

DevFeed: [Using a Toothbrush's NFC chip to Unlock a Computer](<https://devfeed.tech/articles/using-a-toothbrush-s-nfc-chip-to-unlock-a-computer-133391.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/13/using-a-toothbrushs-nfc-chip-to-unlock-a-computer/>)

Author: Maya Posch

Published: 2026-11-13T21:00:24Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>)

Tags: [chip](<https://devfeed.tech/tags/chip.md>), [computer](<https://devfeed.tech/tags/computer.md>), [nfc](<https://devfeed.tech/tags/nfc.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [toothbrush](<https://devfeed.tech/tags/toothbrush.md>)

### AI overview

Some Philips Sonicare replacement brushes contain an NXP NTAG213 NFC chip that tracks details such as brush type, runtime, pressure, and expected lifetime. The excerpt says the chip can be read and written using a PN532 NFC reader and ESP32-S3, allowing experimentation with its data fields. After figuring out how to write to the chip, the demonstrator used it to unlock an Apple MacBook and showed that the chip and antenna can be removed from the brush. The excerpt presents chip salvage as a potentially more practical use, while noting that the MacBook example is niche.

### Source excerpt

Depending on which type of electric toothbrush you are using, the replaceable brushes may contain an NFC chip that the handle and possibly base station uses to track various details, ...read more

## Build a $4 AI desk assistant with an ESP32-S3 chip

DevFeed: [Build a $4 AI desk assistant with an ESP32-S3 chip](<https://devfeed.tech/articles/build-a-4-ai-desk-assistant-with-an-esp32-s3-chip-132431.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/13/build-a-4-ai-desk-assistant-with-an-esp32-s3-chip/>)

Author: Anne Barela

Published: 2026-11-13T16:50:08Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [ai](<https://devfeed.tech/tags/ai.md>), [api](<https://devfeed.tech/tags/api.md>), [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [build](<https://devfeed.tech/tags/build.md>), [chip](<https://devfeed.tech/tags/chip.md>), [computers](<https://devfeed.tech/tags/computers.md>), [desk](<https://devfeed.tech/tags/desk.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [esp32c3](<https://devfeed.tech/tags/esp32c3.md>), [esp32s3](<https://devfeed.tech/tags/esp32s3.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [oled](<https://devfeed.tech/tags/oled.md>), [oled-display](<https://devfeed.tech/tags/oled-display.md>), [projects](<https://devfeed.tech/tags/projects.md>), [social-media](<https://devfeed.tech/tags/social-media.md>), [status](<https://devfeed.tech/tags/status.md>), [tinkercad](<https://devfeed.tech/tags/tinkercad.md>), [voice](<https://devfeed.tech/tags/voice.md>), [weather](<https://devfeed.tech/tags/weather.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

EDISON SCIENCE CORNER's desk assistant uses a $4 ESP32S3 0 microcontroller to set timers, report weather and display social media status on a 1.3-inch OLED. It replaces an earlier ESP32C3 mini version whose WiFi problems were blamed on the board design. The build wires a charging module and battery to the microcontroller, flashes firmware over USB while holding the boot button, and uses a two-part Tinkercad-designed, 3D-printed case. Setup connects to the "Deskr Buddy" network, enters home WiFi credentials at the on-screen IP address, then completes pairing with a six-digit code. Language, voice tone and weather settings are configured at that address; weather requires an OpenWeatherMap API key and city and country. The default wake word is "Hi ESP," with a touch button as an alternative.

### Source excerpt

Julian Horsey writes at Geeky Gadgets about a voice-controlled desk assistant built by EDISON SCIENCE CORNER around the $4 ESP32S3 0 microcontroller. It sets timers, reports the weather and shows a social media status on a 1.3-inch OLED display. The ESP32S3 0 replaces the ESP32C3 mini used in an earlier version, which had WiFi trouble [...]

## DIY WiFi internet radio

DevFeed: [DIY WiFi internet radio](<https://devfeed.tech/articles/diy-wifi-internet-radio-126636.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/10/diy-wifi-internet-radio/>)

Author: Anne Barela

Published: 2026-11-10T16:46:52Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [User interface design](<https://devfeed.tech/topics/ui-design.md>)

Tags: [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [audio](<https://devfeed.tech/tags/audio.md>), [build](<https://devfeed.tech/tags/build.md>), [desktop](<https://devfeed.tech/tags/desktop.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [easyeda](<https://devfeed.tech/tags/easyeda.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [fusion](<https://devfeed.tech/tags/fusion.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [i2s](<https://devfeed.tech/tags/i2s.md>), [internet-of-things](<https://devfeed.tech/tags/internet-of-things.md>), [internet-radio](<https://devfeed.tech/tags/internet-radio.md>), [jlcpcb](<https://devfeed.tech/tags/jlcpcb.md>), [oled](<https://devfeed.tech/tags/oled.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [pla](<https://devfeed.tech/tags/pla.md>), [power](<https://devfeed.tech/tags/power.md>), [psram](<https://devfeed.tech/tags/psram.md>), [stream](<https://devfeed.tech/tags/stream.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

The ESP32-S3 N16R8 powers this desktop WiFi internet radio, handling the network connection, audio stream, interface, and peripherals. It sends digital audio over I2S to a MAX98357 amplifier, which drives a 4 ohm speaker. An I2C OLED displays the station and connection status; a rotary encoder changes stations and volume. Compared with the N8R8 variant, the N16R8's 16 MB flash and 8 MB PSRAM provide more room for audio buffering. A custom EasyEDA PCB replaces hand wiring, and a Fusion 360-designed, PLA-printed enclosure houses the components. The Arduino firmware connects to a configured network on startup and begins streaming; the station list is stored in the source code.

### Source excerpt

Shebin Jose Jacob built a desktop internet radio around the ESP32-S3 and wrote up the project at Coder's Cafe. The ESP32-S3 handles the WiFi connection, the stream, the user interface and the peripherals. The build uses the N16R8 variant, with 16 MB of flash and 8 MB of PSRAM, which leaves more room for audio [...]

## Design and Evaluation of Secure Distributed Chaotic Image Encryption on ESP32-S3

DevFeed: [Design and Evaluation of Secure Distributed Chaotic Image Encryption on ESP32-S3](<https://devfeed.tech/articles/design-and-evaluation-of-secure-distributed-chaotic-image-encryption-on-esp32-s3-126931.md>)

Original publisher: [Read original article](<https://arxiv.org/abs/2611.10595>)

Author: Mohammed Almozaini, Fazal Noor, Sohail Alhazimi

Published: 2026-11-10T05:00:00Z

Content type: article

Language: en

Sources: [arXiv: Cryptography and Security](<https://devfeed.tech/sources/arxiv-cryptography-and-security.md>)

Topics: [Cryptography](<https://devfeed.tech/topics/cryptography.md>), [Encryption](<https://devfeed.tech/topics/encryption.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [TLS (Transport Layer Security)](<https://devfeed.tech/topics/tls.md>), [ECDSA](<https://devfeed.tech/topics/ecdsa.md>), [Image processing](<https://devfeed.tech/topics/image-processing.md>), [sha256](<https://devfeed.tech/topics/sha256.md>), [Image](<https://devfeed.tech/topics/image.md>)

Tags: [architecture](<https://devfeed.tech/tags/architecture.md>), [authentication](<https://devfeed.tech/tags/authentication.md>), [automatic](<https://devfeed.tech/tags/automatic.md>), [communication](<https://devfeed.tech/tags/communication.md>), [correlation](<https://devfeed.tech/tags/correlation.md>), [cs-cr](<https://devfeed.tech/tags/cs-cr.md>), [design](<https://devfeed.tech/tags/design.md>), [devices](<https://devfeed.tech/tags/devices.md>), [distributed](<https://devfeed.tech/tags/distributed.md>), [ecdsa](<https://devfeed.tech/tags/ecdsa.md>), [encrypted](<https://devfeed.tech/tags/encrypted.md>), [encryption](<https://devfeed.tech/tags/encryption.md>), [entropy](<https://devfeed.tech/tags/entropy.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [evaluation](<https://devfeed.tech/tags/evaluation.md>), [execution](<https://devfeed.tech/tags/execution.md>), [experimental](<https://devfeed.tech/tags/experimental.md>), [experiments](<https://devfeed.tech/tags/experiments.md>), [failure](<https://devfeed.tech/tags/failure.md>), [image](<https://devfeed.tech/tags/image.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>)

### AI overview

The system distributes chaotic image encryption across Wi-Fi-connected ESP32-S3 devices while preserving a logically continuous chaotic sequence: a master assigns block-specific starting states independently of which workers process them. It uses reversible chaotic substitution, ECDSA-signed discovery messages, and mutually authenticated TLS 1.3. In tests with one, two, and four workers, execution time fell from 43.215 to 15.878 seconds (2.72x speed-up). The encrypted image had entropy of 7.999940 bits/byte and near-zero adjacent-pixel correlation; matching SHA-256 hashes and SSIM of 1.0 confirmed exact recovery. Tests also showed operation across worker counts and block sizes, reassignment after worker failure, and rejection of a mismatched private key during TLS authentication.

### Source excerpt

arXiv:2611.10595v1 Announce Type: new Abstract: The limited computational resources of Internet of Things (IoT) devices present challenges for secure image processing. This paper presents a distributed chaotic image encryption system using independent Wi-Fi-connected ESP32-S3 microcontrollers. A master-worker architecture distributes image blocks through master-coordinated chaotic sequence management, maintaining one logically continuous chaotic sequence by assigning block-specific starting states independently of worker assignments. The implemented system uses reversible chaotic substitution (SUBSTITUTE), while Elliptic Curve Digital Signature Algorithm (ECDSA)-signed discovery messages and Transport Layer Security (TLS) 1.3 with mutual authentication secure device communication. Experimental evaluation using one, two, and four workers demonstrates a reduction in execution time from 43.215 to 15.878 seconds, achieving a speed-up of 2.72 times. The encrypted image achieves a Shannon entropy of 7.999940 bits/byte and near-zero adjacent-pixel correlation. Exact image recovery is verified through matching Secure Hash Algorithm 256-bit (SHA-256) hashes and a Structural Similarity Index (SSIM) value of 1.0. Additional experiments demonstrate successful encryption and decryption using different worker counts and block sizes, automatic task reassignment following worker failure, and rejection of a mismatched private key during TLS authentication. These findings demonstrate the feasibility of secure, flexible, and distributed chaotic image processing across independent resource-constrained IoT devices.

## OreoOS, a MicroPython-based operating system

DevFeed: [OreoOS, a MicroPython-based operating system](<https://devfeed.tech/articles/oreoos-a-micropython-based-operating-system-117116.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/04/oreoos-a-micropython-based-operating-system/>)

Author: Anne Barela

Published: 2026-11-04T15:17:33Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [MicroPython](<https://devfeed.tech/topics/micropython.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Operating system](<https://devfeed.tech/topics/operating-system.md>)

Tags: [apps](<https://devfeed.tech/tags/apps.md>), [badge](<https://devfeed.tech/tags/badge.md>), [battery](<https://devfeed.tech/tags/battery.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [board](<https://devfeed.tech/tags/board.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [code](<https://devfeed.tech/tags/code.md>), [conferences](<https://devfeed.tech/tags/conferences.md>), [display](<https://devfeed.tech/tags/display.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [github](<https://devfeed.tech/tags/github.md>), [leds](<https://devfeed.tech/tags/leds.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [open](<https://devfeed.tech/tags/open.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [operating-system](<https://devfeed.tech/tags/operating-system.md>), [oreoos](<https://devfeed.tech/tags/oreoos.md>), [os](<https://devfeed.tech/tags/os.md>), [software](<https://devfeed.tech/tags/software.md>)

### AI overview

OreoOS is a MicroPython-based system for an open-hardware conference badge built around the ESP32-S3. It lets the badge launch and switch between apps instead of running a single script. The badge is described as a small, battery-powered board with a display, buttons and LEDs, intended to be reprogrammed by its wearer. The project makes both board files and code available to inspect or reuse.

### Source excerpt

Circuit-Overtime has posted a project called OreoOS in the MicroPython discussions on GitHub. It's an operating system written in MicroPython that runs on an open-hardware conference badge built around the ESP32-S3. The ESP32-S3 is a dual-core microcontroller with WiFi and Bluetooth LE, and it's one of the better supported chips in MicroPython. Badges like this [...]

## Introducing XIAO STM32C5: The First STM32-Powered XIAO with Native CAN FD and Programmable IMU Heating

DevFeed: [Introducing XIAO STM32C5: The First STM32-Powered XIAO with Native CAN FD and Programmable IMU Heating](<https://devfeed.tech/articles/introducing-xiao-stm32c5-the-first-stm32-powered-xiao-with-native-can-fd-and-programmable-imu-heating-117995.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/04/introducing-xiao-stm32c5-the-first-stm32-powered-xiao-with-native-can-fd-and-programmable-imu-heating/>)

Author: Ellie Cai

Published: 2026-11-04T09:14:06Z

Content type: release

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [Robotics](<https://devfeed.tech/topics/robotics.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [accel](<https://devfeed.tech/tags/accel.md>), [accelerometer](<https://devfeed.tech/tags/accelerometer.md>), [adapters](<https://devfeed.tech/tags/adapters.md>), [application](<https://devfeed.tech/tags/application.md>), [applications](<https://devfeed.tech/tags/applications.md>), [arm](<https://devfeed.tech/tags/arm.md>), [can](<https://devfeed.tech/tags/can.md>), [connectivity](<https://devfeed.tech/tags/connectivity.md>), [core](<https://devfeed.tech/tags/core.md>), [cortex](<https://devfeed.tech/tags/cortex.md>), [cortex-m33](<https://devfeed.tech/tags/cortex-m33.md>), [external](<https://devfeed.tech/tags/external.md>), [fdcan](<https://devfeed.tech/tags/fdcan.md>), [feature](<https://devfeed.tech/tags/feature.md>), [first](<https://devfeed.tech/tags/first.md>), [flash](<https://devfeed.tech/tags/flash.md>), [form](<https://devfeed.tech/tags/form.md>), [imu](<https://devfeed.tech/tags/imu.md>), [native](<https://devfeed.tech/tags/native.md>), [news](<https://devfeed.tech/tags/news.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [seeed-studio-xiao](<https://devfeed.tech/tags/seeed-studio-xiao.md>), [stm32](<https://devfeed.tech/tags/stm32.md>), [xiao](<https://devfeed.tech/tags/xiao.md>)

### AI overview

The XIAO STM32C5 combines a 144MHz STM32C5A3CG Cortex-M33, native CAN FD, a six-axis LSM6DS3TR-C IMU with GPIO-controlled heating, and 16MB of external Flash in the compact XIAO form factor. One CAN FD controller connects to an onboard TI transceiver; the second exposes TX/RX signals for an added external transceiver. Firmware can warm the IMU before measurement and, with temperature feedback, regulate it around a setpoint to reduce temperature-related measurement shifts. The board also has 1MB internal Flash, 256KB SRAM, a ±10ppm 48MHz crystal, USB-C, and lithium battery charging. In a demonstrated gimbal, an ESP32S3 Sense handles vision and Wi-Fi streaming while the STM32C5 receives tracking data over UART and controls two motors over CAN FD. The text presents it for connected robotics, industrial control, and motion-control prototypes.

### Source excerpt

Meet the first STM32-powered XIAO. Built around the STM32C5A3CG with a 144MHz Arm Cortex-M33 core, XIAO STM32C5 brings CAN FD connectivity, 16MB of external Flash, and a six-axis IMU with programmable heating to the compact XIAO form factor. The post Introducing XIAO STM32C5: The First STM32-Powered XIAO with Native CAN FD and Programmable IMU Heating appeared first on Latest News from Seeed Studio.

## NEW GUIDE: FLAC and Ogg Playback with CircuitPython #AdafruitLearningSystem #CircuitPython

DevFeed: [NEW GUIDE: FLAC and Ogg Playback with CircuitPython #AdafruitLearningSystem #CircuitPython](<https://devfeed.tech/articles/new-guide-flac-and-ogg-playback-with-circuitpython-adafruitlearningsystem-circuitpython-109131.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/30/new-guide-flac-and-ogg-playback-with-circuitpython-adafruitlearningsystem-circuitpython/>)

Author: Anne Barela

Published: 2026-10-30T17:56:05Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [CircuitPython](<https://devfeed.tech/topics/circuitpython.md>), [Learning](<https://devfeed.tech/topics/learning.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Raspberry Pi RP2350](<https://devfeed.tech/topics/raspberry-pi-rp2350.md>)

Tags: [adafruit](<https://devfeed.tech/tags/adafruit.md>), [adafruit-learning-system](<https://devfeed.tech/tags/adafruit-learning-system.md>), [audio](<https://devfeed.tech/tags/audio.md>), [capabilities](<https://devfeed.tech/tags/capabilities.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [circuitpython-turbo](<https://devfeed.tech/tags/circuitpython-turbo.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [fast](<https://devfeed.tech/tags/fast.md>), [feather](<https://devfeed.tech/tags/feather.md>), [flac](<https://devfeed.tech/tags/flac.md>), [follow](<https://devfeed.tech/tags/follow.md>), [formats](<https://devfeed.tech/tags/formats.md>), [fruit-jam](<https://devfeed.tech/tags/fruit-jam.md>), [guide](<https://devfeed.tech/tags/guide.md>), [mp3](<https://devfeed.tech/tags/mp3.md>), [music](<https://devfeed.tech/tags/music.md>), [ogg](<https://devfeed.tech/tags/ogg.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [over](<https://devfeed.tech/tags/over.md>), [popular](<https://devfeed.tech/tags/popular.md>), [rp2350](<https://devfeed.tech/tags/rp2350.md>), [sound](<https://devfeed.tech/tags/sound.md>), [with](<https://devfeed.tech/tags/with.md>)

### AI overview

The guide shows how to play FLAC and Ogg Vorbis audio files using CircuitPython Turbo on an Adafruit Feather ESP32-S3 and an Adafruit Fruit Jam with the Raspberry Pi RP2350B microcontroller. It presents these open-source formats as higher-quality alternatives some users prefer over MP3. The excerpt does not provide setup steps or playback limitations.

### Source excerpt

A new guide in the Adafruit Learning System: FLAC and Ogg Playback with CircuitPython by Anne Barela with programming by Mikey Sklar. With CircuitPython Turbo on ESP32-S3, RP2350 (and similarly fast boards likely to follow), music playing capabilities have expanded. FLAC and Ogg Vorbis are popular open source audio formats that some prefer over MP3 [...]

## Build an Aliens style motion scanner with an ESP32-S3 and radar

DevFeed: [Build an Aliens style motion scanner with an ESP32-S3 and radar](<https://devfeed.tech/articles/build-an-aliens-style-motion-scanner-with-an-esp32-s3-and-radar-108399.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/30/build-an-aliens-style-motion-scanner-with-an-esp32-s3-and-radar/>)

Author: Anne Barela

Published: 2026-10-30T14:33:53Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [animations](<https://devfeed.tech/topics/animations.md>)

Tags: [aliens](<https://devfeed.tech/tags/aliens.md>), [code](<https://devfeed.tech/tags/code.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [handheld](<https://devfeed.tech/tags/handheld.md>), [ld2450](<https://devfeed.tech/tags/ld2450.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [motion](<https://devfeed.tech/tags/motion.md>), [projects](<https://devfeed.tech/tags/projects.md>), [radar](<https://devfeed.tech/tags/radar.md>), [scanner](<https://devfeed.tech/tags/scanner.md>), [screen](<https://devfeed.tech/tags/screen.md>), [sound](<https://devfeed.tech/tags/sound.md>), [speaker](<https://devfeed.tech/tags/speaker.md>), [tracker](<https://devfeed.tech/tags/tracker.md>)

### AI overview

NorthWorks Lab's handheld Aliens-style motion scanner uses an LD2450 radar module to report moving-target positions; an ESP32-S3 converts that data into an animated display sweep and beeps when contacts appear. The build also includes a small display and speaker, with three connections linking the radar, display, and speaker to the board. Free build files are available to copy or modify.

### Source excerpt

Julian Horsey at Geeky Gadgets writes about a handheld radar built by NorthWorks Lab, modeled on the motion tracker from the movie Aliens. It pairs an ESP32-S3 microcontroller with an LD2450 radar module, a small display and a speaker. The LD2450 reports the position of moving targets, and the ESP32-S3 turns that data into an [...]

## ESP32-S3 Pin & Pinless Enclosure #3DThursday #3DPrinting

DevFeed: [ESP32-S3 Pin & Pinless Enclosure #3DThursday #3DPrinting](<https://devfeed.tech/articles/esp32-s3-pin-pinless-enclosure-3dthursday-3dprinting-106430.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/29/esp32-s3-pin-pinless-enclosure-3dthursday-3dprinting/>)

Author: Pedro

Published: 2026-10-29T16:00:49Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [3D](<https://devfeed.tech/topics/3d.md>)

Tags: [3d](<https://devfeed.tech/tags/3d.md>), [3d-printing](<https://devfeed.tech/tags/3d-printing.md>), [3dprinting](<https://devfeed.tech/tags/3dprinting.md>), [3dthursday](<https://devfeed.tech/tags/3dthursday.md>), [circuitpython](<https://devfeed.tech/tags/circuitpython.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [pin](<https://devfeed.tech/tags/pin.md>), [pinned](<https://devfeed.tech/tags/pinned.md>), [port](<https://devfeed.tech/tags/port.md>), [usb](<https://devfeed.tech/tags/usb.md>), [wi-fi](<https://devfeed.tech/tags/wi-fi.md>)

### AI overview

The enclosure fits ESP32-S3 development boards with a 44-pin layout, including ESP32-S3-WROOM-1 and N16R8 variants, and has separate PINNED and PINLESS print profiles. It includes openings for two USB Type-C ports and a Wi-Fi pattern on top. Listed print times are about 39 minutes for the pin profile and 29 minutes for pinless, using 0.2 mm layers, two walls, 15% infill, and one plate. Commercial use is available through the designer's Patreon under the stated Standard Digital File License.

### Source excerpt

yujixun shares: A protective case for ESP32-S3 development boards (44-pin layout, ESP32-S3-WROOM-1 and N16R8 variants). Supports both PINNED and PINLESS configurations with separate print profiles. Wi-Fi pattern on top for a tech-themed look. Dual USB Type-C port openings. Compact minimalist design -- keeps heat dissipation and functionality intact. Pin profile ~39 min / Pinless profile [...]

## Whistle speech-to-text running fully on an ESP32-S3

DevFeed: [Whistle speech-to-text running fully on an ESP32-S3](<https://devfeed.tech/articles/whistle-speech-to-text-running-fully-on-an-esp32-s3-104619.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/28/whistle-speech-to-text-running-fully-on-an-esp32-s3/>)

Author: Anne Barela

Published: 2026-10-28T16:18:43Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [asr](<https://devfeed.tech/topics/asr.md>), [On-device AI](<https://devfeed.tech/topics/on-device-ai.md>), [Local AI](<https://devfeed.tech/topics/local-ai.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [apache-2-0](<https://devfeed.tech/tags/apache-2-0.md>), [audio](<https://devfeed.tech/tags/audio.md>), [automatic](<https://devfeed.tech/tags/automatic.md>), [board](<https://devfeed.tech/tags/board.md>), [button](<https://devfeed.tech/tags/button.md>), [cloud](<https://devfeed.tech/tags/cloud.md>), [decoder](<https://devfeed.tech/tags/decoder.md>), [demo](<https://devfeed.tech/tags/demo.md>), [dependencies](<https://devfeed.tech/tags/dependencies.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [fixed](<https://devfeed.tech/tags/fixed.md>), [free-speech](<https://devfeed.tech/tags/free-speech.md>), [github](<https://devfeed.tech/tags/github.md>), [int8](<https://devfeed.tech/tags/int8.md>), [language](<https://devfeed.tech/tags/language.md>), [led](<https://devfeed.tech/tags/led.md>), [network](<https://devfeed.tech/tags/network.md>), [phone](<https://devfeed.tech/tags/phone.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [software](<https://devfeed.tech/tags/software.md>), [sound](<https://devfeed.tech/tags/sound.md>), [speech](<https://devfeed.tech/tags/speech.md>), [speech-to-text](<https://devfeed.tech/tags/speech-to-text.md>)

### AI overview

Whistle speech-to-text runs locally on an ESP32-S3 and uses spoken commands to control its onboard WS2812 LED, with free-speech recognition, seven languages, and automatic language detection. Because Cactus Compute ships neither an ESP32 build nor the engine's source, the project uses an independent, dependency-free C99 implementation checked tensor by tensor against the official library. A script reduces the model's laddered decoder to depth 4 to fit the board's flash; int8 matrix multiplies use the S3's PIE vector unit. A two-second English command takes a few seconds to process at 240 MHz. Reported results are 80% accuracy on color commands in int8 and 11.7% word error rate across 73 LibriSpeech utterances.

### Source excerpt

Saulo Verissimo has published whistle-esp32 on GitHub, a speech-to-text demo that runs entirely on an ESP32-S3. Hold a button, say something like "make it red" or "flash the light blue", and the board's onboard WS2812 LED does it. No network, no cloud, no phone. It transcribes free speech rather than matching a fixed list of [...]

## SIMD-accelerated machine vision on an ESP32-S3

DevFeed: [SIMD-accelerated machine vision on an ESP32-S3](<https://devfeed.tech/articles/simd-accelerated-machine-vision-on-an-esp32-s3-104536.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/28/simd-accelerated-machine-vision-on-an-esp32-s3/>)

Author: Anne Barela

Published: 2026-10-28T14:10:01Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [vectorization techniques](<https://devfeed.tech/topics/vectorization-techniques.md>), [image recognition](<https://devfeed.tech/topics/image-recognition.md>)

Tags: [accelerated](<https://devfeed.tech/tags/accelerated.md>), [cameras](<https://devfeed.tech/tags/cameras.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [fast](<https://devfeed.tech/tags/fast.md>), [machine-vision](<https://devfeed.tech/tags/machine-vision.md>), [simd](<https://devfeed.tech/tags/simd.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

shranav's ESP32-S3 FAST detector uses the chip's 128-bit SIMD instructions to raise throughput from 5.1 to 11.2 MP/s--about twice the reference speed, with a QVGA frame taking roughly 6 ms. The implementation works around missing misaligned reads by extracting pixel slices from concatenated registers. Because comparisons use signed 8-bit values and arithmetic saturates, it XORs values with 0x80 to flip the top bit rather than subtracting 128. The reported throughput is enough for a 30 fps VGA stream. The excerpt also notes that shranav wrote basm, a basic register allocator.

### Source excerpt

shranav wrote an accelerated FAST feature detector for the ESP32-S3 that uses the chip's 128-bit SIMD instructions, and posted the writeup on shraiwi.com. It runs about twice as fast as the reference implementation and processes a QVGA 320x240 frame in roughly 6ms. The ESP32-S3 supports a small set of SIMD instructions that are documented but [...]

## SIMD-accelerated Machine Vision on an ESP32-S3

DevFeed: [SIMD-accelerated Machine Vision on an ESP32-S3](<https://devfeed.tech/articles/simd-accelerated-machine-vision-on-an-esp32-s3-101998.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/27/simd-accelerated-machine-vision-on-an-esp32-s3/>)

Author: Maya Posch

Published: 2026-10-27T11:00:12Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Computer vision](<https://devfeed.tech/topics/computer-vision.md>), [Assembly](<https://devfeed.tech/topics/assembly.md>), [vectorization techniques](<https://devfeed.tech/topics/vectorization-techniques.md>), [image recognition](<https://devfeed.tech/topics/image-recognition.md>), [Machine learning](<https://devfeed.tech/topics/machine-learning.md>)

Tags: [artificial-intelligence](<https://devfeed.tech/tags/artificial-intelligence.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [machine-vision](<https://devfeed.tech/tags/machine-vision.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [simd](<https://devfeed.tech/tags/simd.md>)

### AI overview

An ESP32-S3 running at 240 MHz processed VGA video with the FAST corner-detection algorithm in real time at 30 FPS, about twice the speed of a naive non-SIMD implementation. The implementation uses the MCU's Xtensa LX7 SIMD assembly, working around missing unsigned-byte comparisons and direct misaligned reads through custom coding. The excerpt says the PlatformIO project is available on GitHub.

### Source excerpt

Recently [shraiwi] decided to have a bit of good nerdy fun and implement the FAST machine vision algorithm on an ESP32-S3 using its SIMD ISA. This involves using the assembly ...read more

## ESP32 Rotary Display Makes Ideal Timer

DevFeed: [ESP32 Rotary Display Makes Ideal Timer](<https://devfeed.tech/articles/esp32-rotary-display-makes-ideal-timer-101531.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/10/27/esp32-rotary-display-makes-ideal-timer/>)

Author: Tom Nardi

Published: 2026-10-27T08:00:35Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [User interface design](<https://devfeed.tech/topics/ui-design.md>), [touchscreen](<https://devfeed.tech/topics/touchscreen.md>), [color](<https://devfeed.tech/topics/color.md>)

Tags: [all](<https://devfeed.tech/tags/all.md>), [audio](<https://devfeed.tech/tags/audio.md>), [board](<https://devfeed.tech/tags/board.md>), [build](<https://devfeed.tech/tags/build.md>), [but](<https://devfeed.tech/tags/but.md>), [can](<https://devfeed.tech/tags/can.md>), [change](<https://devfeed.tech/tags/change.md>), [circular-display](<https://devfeed.tech/tags/circular-display.md>), [clock-hacks](<https://devfeed.tech/tags/clock-hacks.md>), [clockwork](<https://devfeed.tech/tags/clockwork.md>), [code](<https://devfeed.tech/tags/code.md>), [color](<https://devfeed.tech/tags/color.md>), [combines](<https://devfeed.tech/tags/combines.md>), [cost](<https://devfeed.tech/tags/cost.md>), [display](<https://devfeed.tech/tags/display.md>), [doing](<https://devfeed.tech/tags/doing.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [here](<https://devfeed.tech/tags/here.md>), [kitchen-timer](<https://devfeed.tech/tags/kitchen-timer.md>), [less](<https://devfeed.tech/tags/less.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [round-display](<https://devfeed.tech/tags/round-display.md>), [timer](<https://devfeed.tech/tags/timer.md>), [you-ve](<https://devfeed.tech/tags/you-ve.md>)

### AI overview

[mircemk]'s Universal Timer turns a 2.1-inch CrowPanel Rotary Display into a kitchen-style countdown timer. The device combines an ESP32-S3, a 480x480 round touchscreen, and a built-in rotary encoder; a PCF8574 I2C I/O expander drives a buzzer for feedback when the countdown ends. With the provided code flashed onto the board, users set the time by turning the housing's encoder ring, while rotating graphics and color changes near zero show the countdown visually.

### Source excerpt

We're big fans of pushing hardware into situations it wasn't designed for here at Hackaday, but sometimes you've got to appreciate a nicely designed gadget doing more or less exactly ...read more

## Cirkit Designer: AI-powered ESP32 development with instruction-accurate simulation

DevFeed: [Cirkit Designer: AI-powered ESP32 development with instruction-accurate simulation](<https://devfeed.tech/articles/cirkit-designer-ai-powered-esp32-development-with-instruction-accurate-simulation-99328.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/10/cirkit-esp32-s3-browser-simulation/>)

Author: John Lee

Published: 2026-10-26T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Simulation](<https://devfeed.tech/topics/simulation.md>), [WebAssembly](<https://devfeed.tech/topics/web-assembly.md>), [Xtensa](<https://devfeed.tech/topics/xtensa.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [architecture](<https://devfeed.tech/tags/architecture.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [blog](<https://devfeed.tech/tags/blog.md>), [browser](<https://devfeed.tech/tags/browser.md>), [designer](<https://devfeed.tech/tags/designer.md>), [development](<https://devfeed.tech/tags/development.md>), [emulator](<https://devfeed.tech/tags/emulator.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [overview](<https://devfeed.tech/tags/overview.md>), [peripherals](<https://devfeed.tech/tags/peripherals.md>), [rust](<https://devfeed.tech/tags/rust.md>), [simulation](<https://devfeed.tech/tags/simulation.md>), [web-app](<https://devfeed.tech/tags/web-app.md>), [webassembly](<https://devfeed.tech/tags/webassembly.md>)

### AI overview

Cirkit Designer runs compiled ESP32 and ESP32-S3 firmware in a Rust emulator compiled to WebAssembly, executing locally in the browser and connecting firmware to modeled peripherals through interfaces such as GPIO, I2C, SPI, and PWM. Unlike the server-side QEMU approach discussed, local execution avoids a server round trip for circuit interactions; Arduino CLI builds, AI requests, and external internet access still use Cirkit's backend. The article's ISS tracker example uses an ESP32-S3, simulated ILI9341 display, and HTTPS gateway to fetch live position data, with a labeled demo mode when connectivity is unavailable. Cirkit AI can design circuits, write firmware, help diagnose issues, and create reusable models for unsupported components. Direct ESP-IDF project builds and ESP32-C3/C6 simulation are described as forthcoming.

### Source excerpt

This article introduces Cirkit Designer's simulation architecture for ESP32 and ESP32-S3: an instruction-accurate emulator built from scratch in Rust, compiled to WebAssembly, and connected to simulated hardware in the browser. We'll look at how compiled firmware executes and how it interacts with simulated peripherals.

## ESP-NOW Walkie Talkies

DevFeed: [ESP-NOW Walkie Talkies](<https://devfeed.tech/articles/esp-now-walkie-talkies-99285.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/25/esp-now-walkie-talkies/>)

Author: Takara

Published: 2026-10-25T20:00:49Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [communications](<https://devfeed.tech/topics/communications.md>)

Tags: [adafruit-learning-system](<https://devfeed.tech/tags/adafruit-learning-system.md>), [antenna](<https://devfeed.tech/tags/antenna.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [audio](<https://devfeed.tech/tags/audio.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp-now-walkie-talkies](<https://devfeed.tech/tags/esp-now-walkie-talkies.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>)

### AI overview

A Feather ESP32-S3 Reverse TFT runs Arduino code to make a walkie-talkie pair that sends and receives I2S audio packets over ESP-NOW, with packets up to 10 seconds long. A w.FL antenna is described as adding range for indoor or outdoor communication.

### Source excerpt

Ditch the smart phone and communicate with your buddy by building this set of walkie talkies! A Feather ESP32-S3 Reverse TFT runs Arduino code that uses the ESP-NOW wireless protocol to send and receive I2S audio packets, up to 10 seconds each. The w.FL antenna adds extra range to communicate at longer distances indoors or [...]

## Still flipping through a dozen datasheets to pick an ESP chip? One page is enough

DevFeed: [Still flipping through a dozen datasheets to pick an ESP chip? One page is enough](<https://devfeed.tech/articles/still-flipping-through-a-dozen-datasheets-to-pick-an-esp-chip-one-page-is-enough-96511.md>)

Original publisher: [Read original article](<https://developer.espressif.com/blog/2026/10/esp32-chip-comparison-center/>)

Author: John Lee

Published: 2026-10-23T00:00:00Z

Content type: article

Language: en

Sources: [Blog on Developer Portal](<https://devfeed.tech/sources/blog-on-developer-portal.md>)

Topics: [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-H2](<https://devfeed.tech/topics/esp32-h2.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>)

Tags: [application](<https://devfeed.tech/tags/application.md>), [blog](<https://devfeed.tech/tags/blog.md>), [board](<https://devfeed.tech/tags/board.md>), [capabilities](<https://devfeed.tech/tags/capabilities.md>), [chip](<https://devfeed.tech/tags/chip.md>), [chips](<https://devfeed.tech/tags/chips.md>), [clock](<https://devfeed.tech/tags/clock.md>), [comparison](<https://devfeed.tech/tags/comparison.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [datasheets](<https://devfeed.tech/tags/datasheets.md>), [demo](<https://devfeed.tech/tags/demo.md>), [design](<https://devfeed.tech/tags/design.md>), [details](<https://devfeed.tech/tags/details.md>), [developers](<https://devfeed.tech/tags/developers.md>), [development](<https://devfeed.tech/tags/development.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [e-series](<https://devfeed.tech/tags/e-series.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [overview](<https://devfeed.tech/tags/overview.md>), [product-selection](<https://devfeed.tech/tags/product-selection.md>), [web-app](<https://devfeed.tech/tags/web-app.md>)

### AI overview

Espressif's ESP32 Chip Comparison Center brings technical chip evaluation and board selection into one web tool. It shows a selected chip's capability summary, specification matrix, explanatory notes, and links to official documents. For two or more chips, it presents a side-by-side table with differences highlighted and supports Excel export. Users can filter chips by requirements such as interfaces, including USB speed, and compare remaining matches; application scenarios link to official demos and related hardware and software materials. A separate board selector filters official Espressif development boards by chip and functional or hardware needs, with specifications and supporting materials. The article distinguishes this technical evaluation tool from the ESP Product Selector, which also covers part numbers and commercial and lifecycle information.

### Source excerpt

Espressif chips now run from the ESP8266 and ESP32 through the S, C, H, P, and E series, and the details live in many datasheets. The Chip Comparison Center puts one chip's capabilities, side-by-side differences, requirement filters, application references, and matching development boards on a single page so you can choose a chip or a board faster.

## BIOSTAR BIWCL-PAT - A 3.5-inch industrial Wildcat Lake SBC with dual 2.5GbE, triple display support

DevFeed: [BIOSTAR BIWCL-PAT - A 3.5-inch industrial Wildcat Lake SBC with dual 2.5GbE, triple display support](<https://devfeed.tech/articles/biostar-biwcl-pat-a-3-5-inch-industrial-wildcat-lake-sbc-with-dual-2-5gbe-triple-display-support-89901.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/19/biostar-biwcl-pat-a-3-5-inch-industrial-wildcat-lake-sbc-with-dual-2-5gbe-triple-display-support/>)

Author: Debashis Das

Published: 2026-10-19T09:00:19Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [dual 2.5GbE](<https://devfeed.tech/topics/dual-2-5gbe.md>), [Intel Core](<https://devfeed.tech/topics/intel-core.md>), [ddr5](<https://devfeed.tech/topics/ddr5.md>), [Media Queries](<https://devfeed.tech/topics/media-queries.md>)

Tags: [2-5gbe](<https://devfeed.tech/tags/2-5gbe.md>), [4g-lte](<https://devfeed.tech/tags/4g-lte.md>), [5g](<https://devfeed.tech/tags/5g.md>), [biostar](<https://devfeed.tech/tags/biostar.md>), [ddr5](<https://devfeed.tech/tags/ddr5.md>), [display](<https://devfeed.tech/tags/display.md>), [edge](<https://devfeed.tech/tags/edge.md>), [edge-computing](<https://devfeed.tech/tags/edge-computing.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [graphics](<https://devfeed.tech/tags/graphics.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hmi](<https://devfeed.tech/tags/hmi.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [industrial-automation](<https://devfeed.tech/tags/industrial-automation.md>), [intel](<https://devfeed.tech/tags/intel.md>), [intel-core](<https://devfeed.tech/tags/intel-core.md>), [iot](<https://devfeed.tech/tags/iot.md>), [linux](<https://devfeed.tech/tags/linux.md>), [pat](<https://devfeed.tech/tags/pat.md>), [sbc](<https://devfeed.tech/tags/sbc.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>), [storage](<https://devfeed.tech/tags/storage.md>), [ubuntu](<https://devfeed.tech/tags/ubuntu.md>), [wildcat-lake](<https://devfeed.tech/tags/wildcat-lake.md>), [windows-11](<https://devfeed.tech/tags/windows-11.md>)

### AI overview

BIOSTAR's BIWCL-PAT is a 3.5-inch industrial single-board computer based on Intel's Wildcat Lake Core Series 3 processors. It supports up to 64GB of DDR5-6400 memory, three independent displays, dual 2.5GbE networking, three M.2 slots, and several connectivity and I/O options. BIOSTAR has not announced pricing or availability.

### Source excerpt

BIOSTAR BIWCL-PAT is a 3.5-inch industrial SBC built around the Intel Core Series 3 "Wildcat Lake" SoC family, ranging from the Core 3 304 to the Core 7 360. The board supports up to 64GB DDR5-6400 memory, three independent displays, and dual 2.5GbE networking. It also features three M.2 slots for NVMe storage, Wi-Fi/Bluetooth, and 4G/5G cellular connectivity, along with USB 3.2 ports, four serial interfaces, and an 8-bit digital I/O header. The compact 148 x 102mm form factor makes it suitable for industrial automation, edge computing, AIoT, human-machine interfaces (HMI), and POS/kiosk applications. BIOSTAR BIWCL-PAT specifications: Wildcat Lake SoC (one or the other) Intel Core 3 304 penta-core CPU with 1x P core @ 1.5 GHz / 4.3 GHz (Turbo) and 4x LPE cores, 1-core Intel Xe3 Graphics @ 2.3 GHz; TDP: 15W Intel Core 3 305 hexa-core CPU with 2x P cores @ 1.5 GHz / 4.3 GHz [...] The post BIOSTAR BIWCL-PAT - A 3.5-inch industrial Wildcat Lake SBC with dual 2.5GbE, triple display support appeared first on CNX Software - Embedded Systems News.

## M5Stack PaperDIY Kits pair an ESP32-S3 MCU with a 4.7-inch e-Paper display

DevFeed: [M5Stack PaperDIY Kits pair an ESP32-S3 MCU with a 4.7-inch e-Paper display](<https://devfeed.tech/articles/m5stack-paperdiy-kits-pair-an-esp32-s3-mcu-with-a-4-7-inch-e-paper-display-89642.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/18/m5stack-paperdiy-kits-pair-an-esp32-s3-mcu-with-a-4-7-inch-e-paper-display/>)

Author: Debashis Das

Published: 2026-10-18T03:00:58Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [m5stack](<https://devfeed.tech/topics/m5stack.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>)

Tags: [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [assembly](<https://devfeed.tech/tags/assembly.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [display](<https://devfeed.tech/tags/display.md>), [e-ink](<https://devfeed.tech/tags/e-ink.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [epaper](<https://devfeed.tech/tags/epaper.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [m5stack](<https://devfeed.tech/tags/m5stack.md>), [psram](<https://devfeed.tech/tags/psram.md>), [video](<https://devfeed.tech/tags/video.md>)

### AI overview

M5Stack's PaperDIY series pairs an ESP32-S3 MCU with a 4.7-inch grayscale e-paper display. It is available as a factory-assembled kit or an assembly kit for custom projects, and includes a microSD slot, battery, and low-power management chip. The article also describes its software support and compares it with the earlier M5Paper and a similar LILYGO device.

### Source excerpt

M5Stack has released the PaperDIY series, an updated version of its 2020 M5Paper ESP32 development kit, featuring an ESP32-S3 MCU and a 4.7-inch e-paper display with 16 levels of gray. It comes in two versions: the PaperDIY Complete Kit, which ships factory-assembled in a 3D-printed enclosure, and the PaperDIY Assembly Kit, which is designed to be integrated into custom projects. Both boards also include a microSD card slot for extended storage, a built-in 140mAh battery, and a custom M5PM1 low-power management chip. M5Stack PaperDIY specifications: Core module - Espressif Systems ESP32-S3-WROOM-1-N16R8 SoC - ESP32-S3 CPU - Dual-core LX7 processor with up to 240MHz Memory - 512KB SRAM, 8MB Octal PSRAM Storage - 384KB ROM Wireless - WiFi 4 802.11b/g/n and Bluetooth 5.0 LE Storage - 16MB flash PCB antenna Storage - MicroSD card slot Display - 4.7-inch (960 x 540) ED047TC1 e-paper display with 16-level grayscale and an 8-bit parallel interface for direct display control, [...] The post M5Stack PaperDIY Kits pair an ESP32-S3 MCU with a 4.7-inch e-Paper display appeared first on CNX Software - Embedded Systems News.

## Seeed Studio XIAO IPS display series features ESP32-S3 or nRF52840 SoC with 0.96-inch to 1.47-inch LCD options

DevFeed: [Seeed Studio XIAO IPS display series features ESP32-S3 or nRF52840 SoC with 0.96-inch to 1.47-inch LCD options](<https://devfeed.tech/articles/seeed-studio-xiao-ips-display-series-features-esp32-s3-or-nrf52840-soc-with-0-96-inch-to-1-47-inch-lcd-options-88987.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/10/17/seeed-studio-xiao-ips-display-series-features-esp32-s3-or-nrf52840-soc-with-0-96-inch-to-1-47-inch-lcd-options/>)

Author: Debashis Das

Published: 2026-10-17T03:00:56Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [embedded](<https://devfeed.tech/tags/embedded.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hmi](<https://devfeed.tech/tags/hmi.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [imu](<https://devfeed.tech/tags/imu.md>), [iot](<https://devfeed.tech/tags/iot.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [microphone](<https://devfeed.tech/tags/microphone.md>), [nordic](<https://devfeed.tech/tags/nordic.md>), [nordic-semi](<https://devfeed.tech/tags/nordic-semi.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [wearables](<https://devfeed.tech/tags/wearables.md>), [wifi-4](<https://devfeed.tech/tags/wifi-4.md>), [wireless](<https://devfeed.tech/tags/wireless.md>), [xiao-esp32-s3](<https://devfeed.tech/tags/xiao-esp32-s3.md>)

### AI overview

Seeed Studio introduced six XIAO IPS display development boards using either an ESP32-S3 Plus or nRF52840 Plus MCU. They offer three display sizes, onboard sensors and microphone, and LiPo battery support; the ESP32-S3 models add Wi-Fi, while the nRF52840 models focus on lower-power Bluetooth LE use.

### Source excerpt

Seeed Studio has introduced the XIAO IPS touch display series, a family of six compact development boards built around the XIAO ESP32-S3 Plus or XIAO nRF52840 Plus MCU, with 0.96-inch, 1.14-inch, and 1.47-inch IPS color displays. All six boards include a 6-axis IMU, a PDM digital microphone, user buttons, and LiPo battery support. The larger 1.47-inch version adds capacitive touch and a microSD card slot, whereas the 1.14-inch model includes a Grove I2C connector for connecting external sensors. The ESP32-S3 versions support Wi-Fi and Bluetooth LE connectivity, while the nRF52840 models focus on lower-power Bluetooth LE applications. The boards are designed for portable dashboards, smart home controllers, wearable devices, sensor monitoring, and other small IoT projects. XIAO IPS Display Series specifications: Wireless board (one or the other) XIAO nRF52840 Plus Wireless MCU - Nordic nRF52840 Arm Cortex-M4F microcontroller @ up to 64 MHz with 1 MB flash, 256 KB SRAM, Bluetooth 5.0, [...] The post Seeed Studio XIAO IPS display series features ESP32-S3 or nRF52840 SoC with 0.96-inch to 1.47-inch LCD options appeared first on CNX Software - Embedded Systems News.

[Next page](<https://devfeed.tech/topics/esp32-s3.md?cursor=WyIyMDI2LTEwLTE3VDAzOjAwOjU2KzAwOjAwIiwgImMwZDQ4OWNhLWU3ZTItNDRhZS1hZmM0LTdlZGFiOGYwZWM4NCJd>)