# esphome

ESPHome is an open-source firmware framework and system for creating and remotely controlling custom firmware on WiFi-enabled microcontrollers through YAML configuration files.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## ESPHome 2026.11.0: Lighter builds and tougher updates

DevFeed: [ESPHome 2026.11.0: Lighter builds and tougher updates](<https://devfeed.tech/articles/esphome-2026-11-0-lighter-builds-and-tougher-updates-141073.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/11/18/esphome-2026-11/>)

Author: Jesse Hills

Published: 2026-11-18T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Test-driven development](<https://devfeed.tech/topics/tdd.md>), [CI/CD](<https://devfeed.tech/topics/cicd.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [c-plus-plus](<https://devfeed.tech/tags/c-plus-plus.md>), [components](<https://devfeed.tech/tags/components.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [lighter](<https://devfeed.tech/tags/lighter.md>), [ota](<https://devfeed.tech/tags/ota.md>), [ram](<https://devfeed.tech/tags/ram.md>), [releases](<https://devfeed.tech/tags/releases.md>), [udp](<https://devfeed.tech/tags/udp.md>), [updates](<https://devfeed.tech/tags/updates.md>), [uploads](<https://devfeed.tech/tags/uploads.md>)

### AI overview

ESPHome 2026.11.0 reduces memory use across platforms, with constants moved to flash and automation control flow compiled as C++; a sample configuration saves 1,632 bytes of RAM on ESP8266 and ESP32 IDF. Native OTA now switches to UDP when a lossy link makes TCP uploads fail, while HTTP actions run asynchronously, so scripts may need queued or parallel mode to handle repeated triggers. The release adds more than 30 components and networking features, including captive-portal setup and experimental ESP32 OpenThread border routing. Before upgrading, check configuration changes: sub-devices now require `relation`, ESP-IDF 5.1 is the minimum, and several options and behaviors changed. The notes also list platform-specific fixes and migration steps for affected setups.

### Source excerpt

ESPHome 2026.11.0 trims RAM across every platform, compiles automations to plain C++, falls back to UDP on lossy OTA uploads and adds over thirty new components.

## Making CO₂ Sensors Fail Visibly, Not Silently

DevFeed: [Making CO₂ Sensors Fail Visibly, Not Silently](<https://devfeed.tech/articles/making-co2-sensors-fail-visibly-not-silently-133761.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/14/making-co%e2%82%82-sensors-fail-visibly-not-silently/>)

Author: Donald Papp

Published: 2026-11-14T09:00:43Z

Content type: news

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [smartdevices](<https://devfeed.tech/topics/smartdevices.md>), [Physical AI](<https://devfeed.tech/topics/physical-ai.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [co2](<https://devfeed.tech/tags/co2.md>), [co2-sensor](<https://devfeed.tech/tags/co2-sensor.md>), [esp32-c3](<https://devfeed.tech/tags/esp32-c3.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [fail](<https://devfeed.tech/tags/fail.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [home-automation](<https://devfeed.tech/tags/home-automation.md>), [home-hacks](<https://devfeed.tech/tags/home-hacks.md>), [led](<https://devfeed.tech/tags/led.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [seeed-xiao](<https://devfeed.tech/tags/seeed-xiao.md>), [sensors](<https://devfeed.tech/tags/sensors.md>)

### AI overview

A CO₂ monitor that keeps showing its last good reading can make a dead sensor look healthy. William Collis modified his setup so sensor faults are exposed instead of masked by stale values, and the sensor flashes its fault LED when there is a problem. The monitors use Sensirion SCD30 sensors with Seeed XIAO ESP32-C3 boards running ESPHome to connect to Home Assistant; the changes fit in an ESPHome configuration file, without rewriting firmware. The excerpt also mentions a homebrewed UPS as a possible way to make Home Assistant more resilient.

### Source excerpt

CO₂ buildup in a living area can be a serious problem, and a sensor that fails quietly cannot be relied upon. [William Collis] addressed this important issue by creating CO₂ monitors ...read more

## LocalDot - Open-source PCB for 3rd-gen Amazon Echo Dot enables Home Assistant support (Crowdfunding)

DevFeed: [LocalDot - Open-source PCB for 3rd-gen Amazon Echo Dot enables Home Assistant support (Crowdfunding)](<https://devfeed.tech/articles/localdot-open-source-pcb-for-3rd-gen-amazon-echo-dot-enables-home-assistant-support-crowdfunding-128994.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/11/localdot-an-open-source-replacement-pcb-for-3rd-gen-echo-dot-with-home-assistant-support/>)

Author: Debashis Das

Published: 2026-11-11T00:00:19Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [smart speaker](<https://devfeed.tech/topics/smart-speaker.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [adapter](<https://devfeed.tech/tags/adapter.md>), [amazon](<https://devfeed.tech/tags/amazon.md>), [amazon-echo](<https://devfeed.tech/tags/amazon-echo.md>), [amazon-echo-dot](<https://devfeed.tech/tags/amazon-echo-dot.md>), [amplifier](<https://devfeed.tech/tags/amplifier.md>), [array](<https://devfeed.tech/tags/array.md>), [audio](<https://devfeed.tech/tags/audio.md>), [board](<https://devfeed.tech/tags/board.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [clock](<https://devfeed.tech/tags/clock.md>), [cloud](<https://devfeed.tech/tags/cloud.md>), [cloud-services](<https://devfeed.tech/tags/cloud-services.md>), [combines](<https://devfeed.tech/tags/combines.md>), [commands](<https://devfeed.tech/tags/commands.md>), [compatibility](<https://devfeed.tech/tags/compatibility.md>), [crowd-supply](<https://devfeed.tech/tags/crowd-supply.md>), [crowdfunding](<https://devfeed.tech/tags/crowdfunding.md>), [echo-dot](<https://devfeed.tech/tags/echo-dot.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [recycle](<https://devfeed.tech/tags/recycle.md>), [smart-speaker](<https://devfeed.tech/tags/smart-speaker.md>)

### AI overview

LocalDot replaces one of the two boards in a 3rd-generation Amazon Echo Dot to enable local Home Assistant voice control while reusing the original microphones, speaker, buttons, LEDs, enclosure, and power adapter. An ESP32-P4 handles audio, while an ESP32-S3 provides Wi-Fi and device control; the board supports the four-microphone array, beamforming, and on-device wake-word detection. Through ESPHome, detected commands go to a configured Home Assistant server, enabling local functions without internet access. Installation needs no soldering or enclosure changes. Donut and Crumpet variants are supported; the Clock version is untested. The project plans to publish hardware and firmware files under CERN-OHL-S-2.0. Its Crowd Supply campaign has passed its $7,500 goal; a board is $50, with shipping and fulfillment details stated in the source, and shipment is expected to start April 17, 2027.

### Source excerpt

AAElectronics' LocalDot is an open-source replacement mainboard that converts a 3rd-generation Amazon Echo Dot into a local voice assistant compatible with Home Assistant. The board replaces one of the two original PCBs while reusing the existing microphones, speaker, buttons, LEDs, and enclosure, so the device works without relying on Amazon's cloud services. The board combines an ESP32-S3 for WiFi connectivity and device control with an ESP32-P4 for audio processing. It supports the original four-microphone array with beamforming, on-device wake-word detection, and local voice commands through Home Assistant. Installation requires no soldering or enclosure modifications, and the device still uses the original Echo Dot power adapter. LocalDot specifications: Compatibility - 3rd-generation Amazon Echo Dot (Donut and Crumpet variants; Clock version not tested) SoC ESP32-S3 - Wi-Fi connectivity and device control ESP32-P4 - Dedicated audio processing Audio TAS5805 audio amplifier for the original speaker On-device wake-word detection Beamforming support Reuses the original [...] The post LocalDot - Open-source PCB for 3rd-gen Amazon Echo Dot enables Home Assistant support (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

## Olimex UEXT-CH390 SPI to Ethernet module targets Raspberry Pi and ESP32 MCU boards running ESPHome

DevFeed: [Olimex UEXT-CH390 SPI to Ethernet module targets Raspberry Pi and ESP32 MCU boards running ESPHome](<https://devfeed.tech/articles/olimex-uext-ch390-spi-to-ethernet-module-targets-raspberry-pi-and-esp32-mcu-boards-running-esphome-120335.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/06/olimex-uext-ch390-spi-to-ethernet-module-targets-raspberry-pi-and-esp32-mcu-boards-running-esphome/>)

Author: Debashis Das

Published: 2026-11-06T02:48:49Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Ethernet](<https://devfeed.tech/topics/ethernet.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [controller](<https://devfeed.tech/tags/controller.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [iot](<https://devfeed.tech/tags/iot.md>), [iot-sensors](<https://devfeed.tech/tags/iot-sensors.md>), [kicad](<https://devfeed.tech/tags/kicad.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [module](<https://devfeed.tech/tags/module.md>), [olimex](<https://devfeed.tech/tags/olimex.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [spi](<https://devfeed.tech/tags/spi.md>)

### AI overview

Olimex's UEXT-CH390 adds 10/100 Mbps Ethernet to microcontrollers over SPI, using the WCH CH390's integrated MAC and PHY so the host does not need its own Ethernet MAC. Unlike controllers with hardware TCP/IP offloading, the CH390 relies on the host MCU to process network protocols. The 50 x 21 mm module provides RJ45, UEXT and 1.0 mm-pitch pUEXT connectors, runs on 3.3 V, and supports SPI modes 0 and 3. ESPHome support is described for ESP32 devices, and Olimex has added an RP2040 driver tested on a Pico-compatible board with ESPHome 2026.9.0. That setup supports DHCP, Home Assistant discovery, Ethernet OTA updates after initial USB flashing, and a local web interface. Olimex also provides UF2 firmware and a separate Pico SDK example using lwIP.

### Source excerpt

Olimex UEXT-CH390 is a small open-source hardware module that adds 10/100 Mbps wired Ethernet connectivity to microcontroller boards through an SPI interface. It is designed for Raspberry Pi Pico and Pico 2 boards, as well as ESP32-S3, C3, C5, C6, and other microcontrollers without built-in Ethernet connectivity. The module is based on the WCH CH390 Ethernet controller and features an RJ45 connector, a standard UEXT connector, and a smaller 1.0mm-pitch pUEXT connector. It measures 50 x 21 mm and is supported in the Arduino IDE and ESPHome firmware, making it suitable for wired IoT sensors, Home Assistant devices, and other applications where WiFi is unreliable or unwanted. Olimex UEXT-CH390 specifications: Ethernet controller - WCH CH390 with integrated 10/100 Mbps Ethernet MAC and PHY 10BASE-T and 100BASE-TX Ethernet with auto-negotiation Auto-MDIX support for automatic cable detection Built-in 16KB SRAM for packet buffering Factory-programmed MAC address, eliminating the need for an external [...] The post Olimex UEXT-CH390 SPI to Ethernet module targets Raspberry Pi and ESP32 MCU boards running ESPHome appeared first on CNX Software - Embedded Systems News.

## Hidden WiFi network support 🕳🛜🥷 Adafruit IO WipperSnapper 1.0.0 Beta 134 Released!

DevFeed: [Hidden WiFi network support 🕳🛜🥷 Adafruit IO WipperSnapper 1.0.0 Beta 134 Released!](<https://devfeed.tech/articles/hidden-wifi-network-support-adafruit-io-wippersnapper-1-0-0-beta-134-released-117666.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/04/hidden-wifi-network-support-adafruit-io-wippersnapper-100-beta-134-released/>)

Author: Tyeth

Published: 2026-11-04T18:30:00Z

Content type: release

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [firmware-update](<https://devfeed.tech/topics/firmware-update.md>), [esphome](<https://devfeed.tech/topics/esphome.md>)

Tags: [adafruit](<https://devfeed.tech/tags/adafruit.md>), [adafruit-io](<https://devfeed.tech/tags/adafruit-io.md>), [adafruit-learning-technologies](<https://devfeed.tech/tags/adafruit-learning-technologies.md>), [announce](<https://devfeed.tech/tags/announce.md>), [beta](<https://devfeed.tech/tags/beta.md>), [blank-ssid](<https://devfeed.tech/tags/blank-ssid.md>), [broadcast](<https://devfeed.tech/tags/broadcast.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [guide](<https://devfeed.tech/tags/guide.md>), [hidden](<https://devfeed.tech/tags/hidden.md>), [hidden-ssid](<https://devfeed.tech/tags/hidden-ssid.md>), [hidden-wifi](<https://devfeed.tech/tags/hidden-wifi.md>), [install](<https://devfeed.tech/tags/install.md>), [iot](<https://devfeed.tech/tags/iot.md>), [latest](<https://devfeed.tech/tags/latest.md>), [network](<https://devfeed.tech/tags/network.md>), [no-code](<https://devfeed.tech/tags/no-code.md>), [open-firmware](<https://devfeed.tech/tags/open-firmware.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [ssid](<https://devfeed.tech/tags/ssid.md>), [stable](<https://devfeed.tech/tags/stable.md>), [support](<https://devfeed.tech/tags/support.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wippersnapper](<https://devfeed.tech/tags/wippersnapper.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

Adafruit WipperSnapper Firmware 1.0.0 beta 134 adds support for hidden WiFi networks, which do not broadcast their SSID until it is requested. Install WipperSnapper using the learning system guide or the step-by-step installer at io.adafruit.com/devices/new. To upgrade an existing device, find it at io.adafruit.com/devices and click "Update." The installer recently received esptool-js updates; the text asks users to report any issues.

### Source excerpt

Adafruit WipperSnapper Firmware 1.0.0 beta 134 has been released on GitHub. This is the latest version of WipperSnapper and a stable release. It adds support for hidden wireless networks, which refuse to broadcast their SSID name until the correct one is requested. Installing WipperSnapper Follow this learning system guide to learn how to install WipperSnapper on [...]

## New open source hardware UEXT module adds 100MB Ethernet to PICO, PICO2 and all ESP32s lacking wired Ethernet

DevFeed: [New open source hardware UEXT module adds 100MB Ethernet to PICO, PICO2 and all ESP32s lacking wired Ethernet](<https://devfeed.tech/articles/new-open-source-hardware-uext-module-adds-100mb-ethernet-to-pico-pico2-and-all-esp32s-lacking-wired-ethernet-117115.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/04/new-open-source-hardware-uext-module-adds-100mb-ethernet-to-pico-pico2-and-all-esp32s-lacking-wired-ethernet/>)

Author: Anne Barela

Published: 2026-11-04T16:44:08Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Ethernet](<https://devfeed.tech/topics/ethernet.md>), [kicad](<https://devfeed.tech/topics/kicad.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [controller](<https://devfeed.tech/tags/controller.md>), [driver](<https://devfeed.tech/tags/driver.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [example](<https://devfeed.tech/tags/example.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [github](<https://devfeed.tech/tags/github.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [kicad](<https://devfeed.tech/tags/kicad.md>), [module](<https://devfeed.tech/tags/module.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-hardware](<https://devfeed.tech/tags/open-source-hardware.md>), [pico](<https://devfeed.tech/tags/pico.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [spi](<https://devfeed.tech/tags/spi.md>), [uext](<https://devfeed.tech/tags/uext.md>), [wch](<https://devfeed.tech/tags/wch.md>), [wired](<https://devfeed.tech/tags/wired.md>)

### AI overview

Olimex's UEXT-CH390 adds 100 Mbit wired Ethernet to boards with UEXT or pUEXT connectors, using a WCH CH390 SPI-to-Ethernet controller. It supports Raspberry Pi PICO/PICO2 and ESP32 variants without wired Ethernet MACs, including S3, C3, C5 and C6. Arduino and ESPHome support CH390, but ESPHome's support was limited to ESP32, so Olimex wrote an RP2040 driver. The excerpt describes an ESPHome example pinned to a version of the Ethernet component and tested with ESPHome 2026.9.0, a flashable UF2 that appears in Home Assistant, and a Pico SDK/lwIP web-server example. KiCad sources, schematic and firmware are published. The 50 x 21 mm module has both UEXT and smaller pUEXT headers; it is listed at 4.95 EUR for pre-order, with shipping from 9 November 2026.

### Source excerpt

Olimex has announced UEXT-CH390 on the company blog, a small open source hardware module that adds 100 Mbit wired Ethernet to any board with a UEXT or pUEXT connector. UEXT is Olimex's own connector standard for add-on boards. The module uses the WCH CH390 SPI-to-Ethernet controller, measures 50 x 21 mm, and carries both the [...]

## ESPHome 2026.10.0: Native ESP8266 builds and compressed updates

DevFeed: [ESPHome 2026.10.0: Native ESP8266 builds and compressed updates](<https://devfeed.tech/articles/esphome-2026-10-0-native-esp8266-builds-and-compressed-updates-92725.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/10/21/esphome-2026-10/>)

Author: Jesse Hills

Published: 2026-10-21T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP8266](<https://devfeed.tech/topics/esp8266.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [build](<https://devfeed.tech/tags/build.md>), [builds](<https://devfeed.tech/tags/builds.md>), [components](<https://devfeed.tech/tags/components.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [native](<https://devfeed.tech/tags/native.md>), [ota](<https://devfeed.tech/tags/ota.md>), [platform](<https://devfeed.tech/tags/platform.md>), [ram](<https://devfeed.tech/tags/ram.md>), [releases](<https://devfeed.tech/tags/releases.md>), [toolchain](<https://devfeed.tech/tags/toolchain.md>), [updates](<https://devfeed.tech/tags/updates.md>)

### AI overview

ESPHome 2026.10.0 makes its native Arduino toolchain the default for ESP8266, reducing reported compile times and removing the need for Rosetta on supported Apple Silicon hosts; the old PlatformIO path remains available temporarily with a deprecation warning. Compressed OTA transfers extend to ESP32, RP2040, LibreTiny and host, sending images about one third smaller; older clients and firmware retain the uncompressed path, and exhausted memory triggers a fallback. The release also reports API and memory optimizations across builds, faster ESP-IDF builds, outgoing API connections for devices behind NAT, browser flashing for more chip families and 20 new components. Before updating, check breaking changes: remove `codec_support_enabled` from speaker configs, update Sendspin's Music Assistant server to 2.10.7 or 2.11.0b4 or newer, and review light boot behavior, climate heat/cool modes and remote receiver buffer sizes if those settings apply. The excerpt lists further config and C++ API migrations for specialized setups.

### Source excerpt

ESPHome 2026.10.0 makes the native ESP8266 toolchain the default, compresses OTA uploads on every platform, trims RAM across every build, and adds 20 new components.

## Turn every escape room puzzle into a Home Assistant device

DevFeed: [Turn every escape room puzzle into a Home Assistant device](<https://devfeed.tech/articles/turn-every-escape-room-puzzle-into-a-home-assistant-device-85755.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/12/turn-every-escape-room-puzzle-into-a-home-assistant-device/>)

Author: Anne Barela

Published: 2026-10-12T21:22:39Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [Matter](<https://devfeed.tech/topics/matter.md>)

Tags: [arduino](<https://devfeed.tech/tags/arduino.md>), [displays](<https://devfeed.tech/tags/displays.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [mqtt](<https://devfeed.tech/tags/mqtt.md>), [nfc](<https://devfeed.tech/tags/nfc.md>), [rp2040](<https://devfeed.tech/tags/rp2040.md>), [rs485](<https://devfeed.tech/tags/rs485.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

Two open source Arduino libraries let escape room puzzles appear as Home Assistant devices. One runs on ESP32 and uses WiFi and MQTT; the other runs on RP2040 and communicates with other puzzles over RS485. Both share a puzzle state machine and hardware abstraction layer, and use MQTT discovery to create Home Assistant entities without YAML configuration.

### Source excerpt

Djair Guilherme has released two open source Arduino libraries on Hackster that make an escape room puzzle show up in Home Assistant as a device. esp32_escaperoom runs on ESP32 boards and handles WiFi and MQTT. propmaker_escaperoom runs on the RP2040 using the Adafruit PropMaker Feather, has no network and talks to other puzzles over RS485. [...]

## Adding a non-WiFi Mitsubishi AC to Home Assistant

DevFeed: [Adding a non-WiFi Mitsubishi AC to Home Assistant](<https://devfeed.tech/articles/adding-a-non-wifi-mitsubishi-ac-to-home-assistant-61180.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/09/28/adding-a-non-wifi-mitsubishi-ac-to-home-assistant/>)

Author: Anne Barela

Published: 2026-09-28T20:37:59Z

Content type: tutorial

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [esphome](<https://devfeed.tech/topics/esphome.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>)

Tags: [air-conditioner](<https://devfeed.tech/tags/air-conditioner.md>), [automation](<https://devfeed.tech/tags/automation.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [home-automation](<https://devfeed.tech/tags/home-automation.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [python](<https://devfeed.tech/tags/python.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

A project connects a Mitsubishi ducted air conditioner to Home Assistant through its CN105 service port, using an ESP32 and ESPHome instead of Mitsubishi's WiFi adapter. It enables local control of the unit's power, mode, setpoint and fan speeds, along with temperature readings. The external component also provides outdoor temperature, energy use and error codes.

### Source excerpt

A Medium post walks through putting a ducted Mitsubishi air conditioner on Home Assistant without Mitsubishi's own WiFi adapter. The unit, an SEZ-M60DA2 from around 2022, is run by a wired wall thermostat with no network connection at all. The trick is the CN105 service port on the indoor unit's control board, the same connector [...]

## ESPHome 2026.9.0: Faster builds and encrypted updates

DevFeed: [ESPHome 2026.9.0: Faster builds and encrypted updates](<https://devfeed.tech/articles/esphome-2026-9-0-faster-builds-and-encrypted-updates-31446.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/09/16/esphome-2026-9/>)

Author: Jesse Hills

Published: 2026-09-16T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [PlatformIO](<https://devfeed.tech/topics/platformio.md>), [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [Encryption](<https://devfeed.tech/topics/encryption.md>), [build performance](<https://devfeed.tech/topics/build-performance.md>), [ChaCha](<https://devfeed.tech/topics/chacha-cipher.md>), [toolchain](<https://devfeed.tech/topics/toolchain.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [benchmarks](<https://devfeed.tech/tags/benchmarks.md>), [builds](<https://devfeed.tech/tags/builds.md>), [ci](<https://devfeed.tech/tags/ci.md>), [encryption](<https://devfeed.tech/tags/encryption.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [ota](<https://devfeed.tech/tags/ota.md>), [parallel](<https://devfeed.tech/tags/parallel.md>), [releases](<https://devfeed.tech/tags/releases.md>), [toolchain](<https://devfeed.tech/tags/toolchain.md>), [updates](<https://devfeed.tech/tags/updates.md>)

### AI overview

ESPHome 2026.9.0 improves build performance by parallelizing PlatformIO setup, lays groundwork for a native ESP8266 toolchain, adds Noise-encrypted OTA updates, and reduces ESP8266 RAM usage. The release also includes component additions, platform updates, and fixes.

### Source excerpt

ESPHome 2026.9.0 parallelizes PlatformIO installs, lays the groundwork for a native ESP8266 toolchain, adds Noise-encrypted OTA updates, and frees ESP8266 RAM.

## ESPHome 2026.8.0: Bluetooth on more chips than ever

DevFeed: [ESPHome 2026.8.0: Bluetooth on more chips than ever](<https://devfeed.tech/articles/esphome-2026-8-0-bluetooth-on-more-chips-than-ever-16717.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/08/19/esphome-2026-8/>)

Author: Jesse Hills

Published: 2026-08-19T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [Network](<https://devfeed.tech/topics/network.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Ethernet](<https://devfeed.tech/topics/ethernet.md>), [Modbus](<https://devfeed.tech/topics/modbus.md>), [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [Lvgl](<https://devfeed.tech/topics/lvgl.md>)

Tags: [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [lvgl](<https://devfeed.tech/tags/lvgl.md>), [modbus](<https://devfeed.tech/tags/modbus.md>), [networking](<https://devfeed.tech/tags/networking.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>)

### AI overview

ESPHome 2026.8.0 expands Bluetooth support beyond ESP32 through a platform-neutral BLE layer, adds Bluetooth Proxy support for more chips and Raspberry Pi Pico W, and introduces faster builds, combined Ethernet and WiFi configuration, Modbus changes, OTA signature verification, and other device and builder improvements.

### Source excerpt

ESPHome 2026.8.0 brings Bluetooth to more chips, dramatically faster builds, Ethernet and WiFi together, a major Modbus overhaul, and more.

## Simplify your ESPHome setup with the new desktop app

DevFeed: [Simplify your ESPHome setup with the new desktop app](<https://devfeed.tech/articles/simplify-your-esphome-setup-with-the-new-desktop-app-16714.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/08/04/simplify-your-esphome-setup-with-the-new-desktop-app/>)

Author: Jesse Hills

Published: 2026-08-04T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [App](<https://devfeed.tech/topics/app.md>), [Linux](<https://devfeed.tech/topics/linux.md>), [macOS](<https://devfeed.tech/topics/macos.md>), [Windows](<https://devfeed.tech/topics/windows.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>)

Tags: [announcements](<https://devfeed.tech/tags/announcements.md>), [app](<https://devfeed.tech/tags/app.md>), [desktop](<https://devfeed.tech/tags/desktop.md>), [devices](<https://devfeed.tech/tags/devices.md>), [download](<https://devfeed.tech/tags/download.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [linux](<https://devfeed.tech/tags/linux.md>), [macos](<https://devfeed.tech/tags/macos.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [smart-home](<https://devfeed.tech/tags/smart-home.md>), [windows](<https://devfeed.tech/tags/windows.md>)

### AI overview

ESPHome has released a desktop app for macOS, Windows, and Linux. The app simplifies setup by handling technical installation tasks, opening the Device Builder in a browser, and providing system-tray access for reopening it, checking updates, or quitting. It runs locally without requiring a login or password.

### Source excerpt

Download the new ESPHome Device Builder desktop app for macOS, Windows, or Linux, and start building your own custom smart home devices in minutes.

## ESPHome 2026.7.0: Native toolchains by default

DevFeed: [ESPHome 2026.7.0: Native toolchains by default](<https://devfeed.tech/articles/esphome-2026-7-0-native-toolchains-by-default-16712.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/07/15/esphome-2026-7/>)

Author: Jesse Hills

Published: 2026-07-15T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [toolchain](<https://devfeed.tech/topics/toolchain.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Modbus](<https://devfeed.tech/topics/modbus.md>), [Security](<https://devfeed.tech/topics/security.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [SDK](<https://devfeed.tech/topics/sdk.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [modbus](<https://devfeed.tech/tags/modbus.md>), [native](<https://devfeed.tech/tags/native.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [security](<https://devfeed.tech/tags/security.md>), [toolchains](<https://devfeed.tech/tags/toolchains.md>)

### AI overview

ESPHome 2026.7.0 makes native ESP32 and nRF52 toolchains the default, adds security infrastructure including NVS encryption and OTA downgrade protection, and introduces a transport-agnostic provisioning component. The release also overhauls Modbus and includes performance, memory, LVGL, Ethernet, ESP-NOW, Zigbee, and component updates.

### Source excerpt

ESPHome 2026.7.0 makes native toolchains the default on ESP32 and nRF52, adds EN18031 security groundwork, and overhauls Modbus.

## ESPHome introduces a visual Device Builder in its latest release

DevFeed: [ESPHome introduces a visual Device Builder in its latest release](<https://devfeed.tech/articles/unbox-your-creativity-with-the-esphome-device-builder-16711.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/07/02/unbox-your-creativity-with-the-esphome-device-builder/>)

Author: Jesse Hills

Published: 2026-07-02T00:00:00Z

Content type: article

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [dashboards](<https://devfeed.tech/topics/dashboards.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>)

Tags: [announcements](<https://devfeed.tech/tags/announcements.md>), [beginners](<https://devfeed.tech/tags/beginners.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [features](<https://devfeed.tech/tags/features.md>), [release](<https://devfeed.tech/tags/release.md>), [smart-home](<https://devfeed.tech/tags/smart-home.md>)

### AI overview

The latest ESPHome release introduces a visual Device Builder that replaces the old text-heavy dashboard with an interactive component catalog and layout workspace. The update is intended to make custom smart home device projects more approachable while retaining control for experienced users.

### Source excerpt

Discover a more approachable way to bring your smart home ideas to life: the new visual Device Builder in the latest ESPHome release.

## ESPHome 2026.6.0: Meet the new Device Builder

DevFeed: [ESPHome 2026.6.0: Meet the new Device Builder](<https://devfeed.tech/articles/esphome-2026-6-0-meet-the-new-device-builder-16710.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/06/17/esphome-2026-6/>)

Author: Jesse Hills

Published: 2026-06-17T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [dashboards](<https://devfeed.tech/topics/dashboards.md>), [ESP8266](<https://devfeed.tech/topics/esp8266.md>), [User Interfaces](<https://devfeed.tech/topics/user-interfaces.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [audio](<https://devfeed.tech/tags/audio.md>), [esp8266](<https://devfeed.tech/tags/esp8266.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [lvgl](<https://devfeed.tech/tags/lvgl.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [security](<https://devfeed.tech/tags/security.md>), [ui](<https://devfeed.tech/tags/ui.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

ESPHome 2026.6.0 retires the legacy in-tree dashboard and replaces it with ESPHome Device Builder 1.0.0. The release also raises default ESP8266 WiFi security to WPA2, improves SRAM reclamation and LVGL validation performance, modernizes the audio stack, and adds new IMU and USB-serial capabilities.

### Source excerpt

ESPHome 2026.6.0 retires the legacy dashboard for ESPHome Device Builder 1.0.0, raises ESP8266 WiFi security to WPA2, and modernizes the audio stack.

## ESPHome 2026.5.0: Device Builder enters public beta

DevFeed: [ESPHome 2026.5.0: Device Builder enters public beta](<https://devfeed.tech/articles/esphome-2026-5-0-device-builder-enters-public-beta-16709.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/05/20/esphome-2026-5/>)

Author: Jesse Hills

Published: 2026-05-20T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Web app](<https://devfeed.tech/topics/webapp.md>), [configuration](<https://devfeed.tech/topics/configuration.md>), [toolchain](<https://devfeed.tech/topics/toolchain.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Streaming](<https://devfeed.tech/topics/streaming.md>), [zigbee](<https://devfeed.tech/topics/zigbee.md>)

Tags: [configuration](<https://devfeed.tech/tags/configuration.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [feature](<https://devfeed.tech/tags/feature.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [streaming](<https://devfeed.tech/tags/streaming.md>), [toolchain](<https://devfeed.tech/tags/toolchain.md>), [web-app](<https://devfeed.tech/tags/web-app.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

ESPHome 2026.5.0 launches the public beta of the ESPHome Device Builder, a web application that replaces the legacy dashboard with configuration editing, firmware job management, bulk actions, search, distributed builds, and settings. The release also reworks the main loop and watchdog, adds measured optimizations, introduces native ESP-IDF toolchain support alongside PlatformIO, modernizes audio decoding, expands OTA capabilities, and adds ESP32-based Zigbee and multi-room audio components.

### Source excerpt

ESPHome 2026.5.0 launches the public beta of the new ESPHome Device Builder, reworks the main loop and watchdog, and modernizes the audio decoder pipeline.

## Scraping ESPHome metrics with Prometheus

DevFeed: [Scraping ESPHome metrics with Prometheus](<https://devfeed.tech/articles/scraping-esphome-metrics-with-prometheus-21774.md>)

Original publisher: [Read original article](<https://enoent.fr/posts/production-grade-esphome/01-scraping-esphome-metrics-with-prometheus/>)

Author: Marc Plano-Lesay

Published: 2026-03-29T03:18:27Z

Content type: tutorial

Language: en

Sources: [Marc Plano-Lesay](<https://devfeed.tech/sources/marc-plano-lesay.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Prometheus](<https://devfeed.tech/topics/prometheus.md>), [observability](<https://devfeed.tech/topics/observability.md>), [Monitoring](<https://devfeed.tech/topics/monitoring.md>), [Grafana](<https://devfeed.tech/topics/grafana.md>)

Tags: [devices](<https://devfeed.tech/tags/devices.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [grafana](<https://devfeed.tech/tags/grafana.md>), [iot](<https://devfeed.tech/tags/iot.md>), [monitoring](<https://devfeed.tech/tags/monitoring.md>), [observability](<https://devfeed.tech/tags/observability.md>), [prometheus](<https://devfeed.tech/tags/prometheus.md>)

### AI overview

A tutorial on exposing ESPHome device metrics in the OpenMetrics format and scraping them with Prometheus. It explains how observability helps monitor device state, connectivity, and diagnostic information, with Grafana mentioned for dashboards and alerting.

### Source excerpt

What is observability and why does it matter? ESPHome is an amazing tool. Devices you build with it are very useful. But how do you notice when they don't work? You would eventually notice if a temperature sensor stopped working and your climate control automations aren't working as intended. While that's not ideal, it gets worse: what about a sensor part of an alarm system, detecting that a window is open?

## ESPHome 2026.3.0: Performance overhaul and first-class RP2040

DevFeed: [ESPHome 2026.3.0: Performance overhaul and first-class RP2040](<https://devfeed.tech/articles/esphome-2026-3-0-performance-overhaul-and-first-class-rp2040-16707.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/03/18/esphome-2026-3/>)

Author: Jesse Hills

Published: 2026-03-18T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [API](<https://devfeed.tech/topics/api.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>)

Tags: [api](<https://devfeed.tech/tags/api.md>), [architecture](<https://devfeed.tech/tags/architecture.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bug](<https://devfeed.tech/tags/bug.md>), [crash](<https://devfeed.tech/tags/crash.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [performance](<https://devfeed.tech/tags/performance.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>)

### AI overview

ESPHome 2026.3.0 is a performance-focused release with substantial optimizations, first-class RP2040 and RP2350 support, a redesigned media player architecture, expanded hardware capabilities, crash diagnostics, and numerous correctness fixes.

### Source excerpt

ESPHome 2026.3.0 delivers deep performance work across the main loop, lights and API, first-class RP2040/RP2350 support, and a new media player architecture.

## ESPHome 2026.2.0: Faster builds, leaner runtime

DevFeed: [ESPHome 2026.2.0: Faster builds, leaner runtime](<https://devfeed.tech/articles/esphome-2026-2-0-faster-builds-leaner-runtime-16706.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/02/18/esphome-2026-2/>)

Author: Jesse Hills

Published: 2026-02-18T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [Arduino](<https://devfeed.tech/topics/arduino.md>), [MQTT](<https://devfeed.tech/topics/mqtt.md>), [Optimization](<https://devfeed.tech/topics/optimization.md>), [zigbee](<https://devfeed.tech/topics/zigbee.md>), [Security](<https://devfeed.tech/topics/security.md>)

Tags: [2026-2](<https://devfeed.tech/tags/2026-2.md>), [arduino](<https://devfeed.tech/tags/arduino.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [mqtt](<https://devfeed.tech/tags/mqtt.md>), [optimization](<https://devfeed.tech/tags/optimization.md>), [performance](<https://devfeed.tech/tags/performance.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [security](<https://devfeed.tech/tags/security.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

ESPHome 2026.2.0 is a performance and stability release that improves ESP32 build times, reduces firmware size and CPU usage, adds new components and display models, expands the Zigbee platform, and strengthens authentication and cryptographic randomness.

### Source excerpt

ESPHome 2026.2.0 is a performance and stability release: faster ESP32 builds, smaller firmware, lower CPU usage, three new components, and security hardening.

## ESPHome 2026.1.0: Automatic WiFi roaming and ESP-IDF by default

DevFeed: [ESPHome 2026.1.0: Automatic WiFi roaming and ESP-IDF by default](<https://devfeed.tech/articles/esphome-2026-1-0-automatic-wifi-roaming-and-esp-idf-by-default-16705.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2026/01/21/esphome-2026-1/>)

Author: Jesse Hills

Published: 2026-01-21T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP-IDF](<https://devfeed.tech/topics/esp-idf.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [Encryption](<https://devfeed.tech/topics/encryption.md>)

Tags: [encryption](<https://devfeed.tech/tags/encryption.md>), [esp](<https://devfeed.tech/tags/esp.md>), [esp-idf](<https://devfeed.tech/tags/esp-idf.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [optimization](<https://devfeed.tech/tags/optimization.md>), [ota](<https://devfeed.tech/tags/ota.md>), [performance](<https://devfeed.tech/tags/performance.md>), [releases](<https://devfeed.tech/tags/releases.md>), [security](<https://devfeed.tech/tags/security.md>), [sha256](<https://devfeed.tech/tags/sha256.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

ESPHome 2026.1.0 adds automatic WiFi roaming, makes ESP-IDF the default framework for supported ESP32 targets, requires API encryption and SHA256 authentication for OTA updates, and introduces performance, platform, hardware, and parsing improvements.

### Source excerpt

ESPHome 2026.1.0 adds automatic WiFi roaming, makes ESP-IDF the default on ESP32, requires API encryption and SHA256 OTA, and lands broad performance work.

## ESPHome 2025.12.0: API action responses and HUB75 matrix displays

DevFeed: [ESPHome 2025.12.0: API action responses and HUB75 matrix displays](<https://devfeed.tech/articles/esphome-2025-12-0-api-action-responses-and-hub75-matrix-displays-16704.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/12/17/esphome-2025-12/>)

Author: Jesse Hills

Published: 2025-12-17T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [API](<https://devfeed.tech/topics/api.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [configuration](<https://devfeed.tech/topics/configuration.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [Lvgl](<https://devfeed.tech/topics/lvgl.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [2025](<https://devfeed.tech/tags/2025.md>), [api](<https://devfeed.tech/tags/api.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [display](<https://devfeed.tech/tags/display.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [inclusion](<https://devfeed.tech/tags/inclusion.md>), [led](<https://devfeed.tech/tags/led.md>), [lvgl](<https://devfeed.tech/tags/lvgl.md>), [releases](<https://devfeed.tech/tags/releases.md>), [usability](<https://devfeed.tech/tags/usability.md>), [usb](<https://devfeed.tech/tags/usb.md>)

### AI overview

ESPHome 2025.12.0 adds API action responses for bidirectional communication with Home Assistant, conditional package inclusion, HUB75 LED matrix display support, memory optimizations, and eight new components.

### Source excerpt

ESPHome 2025.12.0 introduces API action responses, conditional package inclusion, and HUB75 LED matrix display support, along with memory optimizations and eight new components.

## ESPHome 2025.11.0: WiFi overhaul and ultra-low latency events

DevFeed: [ESPHome 2025.11.0: WiFi overhaul and ultra-low latency events](<https://devfeed.tech/articles/esphome-2025-11-0-wifi-overhaul-and-ultra-low-latency-events-16703.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/11/19/esphome-2025-11/>)

Author: Jesse Hills

Published: 2025-11-19T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Latency](<https://devfeed.tech/topics/latency.md>), [Network](<https://devfeed.tech/topics/network.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [MQTT](<https://devfeed.tech/topics/mqtt.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [improvements](<https://devfeed.tech/tags/improvements.md>), [latency](<https://devfeed.tech/tags/latency.md>), [low-latency](<https://devfeed.tech/tags/low-latency.md>), [mqtt](<https://devfeed.tech/tags/mqtt.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [usb](<https://devfeed.tech/tags/usb.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

ESPHome 2025.11.0 is a performance and reliability-focused release that overhauls WiFi connection handling, reduces event-processing latency across several integrations, optimizes memory use, and adds seven hardware components.

### Source excerpt

ESPHome 2025.11.0 overhauls WiFi connection handling, cuts event processing latency across BLE, USB, MQTT and ESP-NOW, frees several KB of RAM and flash, and adds seven new components.

## ESPHome 2025.9.0: MIPI RGB displays and a camera JPEG encoder

DevFeed: [ESPHome 2025.9.0: MIPI RGB displays and a camera JPEG encoder](<https://devfeed.tech/articles/esphome-2025-9-0-mipi-rgb-displays-and-a-camera-jpeg-encoder-16701.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/09/17/esphome-2025-9/>)

Author: Jesse Hills

Published: 2025-09-17T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [Compression](<https://devfeed.tech/topics/compression.md>), [Developer Tools](<https://devfeed.tech/topics/developer-tools.md>), [Streaming](<https://devfeed.tech/topics/streaming.md>)

Tags: [2025](<https://devfeed.tech/tags/2025.md>), [camera](<https://devfeed.tech/tags/camera.md>), [compatibility](<https://devfeed.tech/tags/compatibility.md>), [compression](<https://devfeed.tech/tags/compression.md>), [developer-tools](<https://devfeed.tech/tags/developer-tools.md>), [dfu](<https://devfeed.tech/tags/dfu.md>), [display](<https://devfeed.tech/tags/display.md>), [firmware-update](<https://devfeed.tech/tags/firmware-update.md>), [improvements](<https://devfeed.tech/tags/improvements.md>), [jpeg](<https://devfeed.tech/tags/jpeg.md>), [memory](<https://devfeed.tech/tags/memory.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [releases](<https://devfeed.tech/tags/releases.md>), [rgb](<https://devfeed.tech/tags/rgb.md>)

### AI overview

ESPHome 2025.9.0 adds MIPI RGB display support, a camera JPEG encoder, nRF52 DFU support, ESPHome Builder improvements, memory optimizations, and enhanced sensor and component support.

### Source excerpt

ESPHome 2025.9.0 adds MIPI RGB display support, a camera JPEG encoder, DFU support for nRF52, and ESPHome Builder improvements, along with extensive memory optimizations.

## ESPHome 2025.8.0: nRF52 support and ESP-NOW mesh communication

DevFeed: [ESPHome 2025.8.0: nRF52 support and ESP-NOW mesh communication](<https://devfeed.tech/articles/esphome-2025-8-0-nrf52-support-and-esp-now-mesh-communication-16700.md>)

Original publisher: [Read original article](<https://esphome.io/blog/2025/08/20/esphome-2025-8/>)

Author: Jesse Hills

Published: 2025-08-20T00:00:00Z

Content type: release

Language: en

Sources: [ESPHome](<https://devfeed.tech/sources/esphome-smart-home-made-simple-blog.md>)

Topics: [esphome](<https://devfeed.tech/topics/esphome.md>), [ESP-NOW](<https://devfeed.tech/topics/esp-now.md>), [Microcontroller](<https://devfeed.tech/topics/microcontroller.md>), [Zephyr RTOS](<https://devfeed.tech/topics/zephyr-rtos.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>)

Tags: [2025](<https://devfeed.tech/tags/2025.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [esp-now](<https://devfeed.tech/tags/esp-now.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [esphome](<https://devfeed.tech/tags/esphome.md>), [introduction](<https://devfeed.tech/tags/introduction.md>), [latency](<https://devfeed.tech/tags/latency.md>), [low-latency](<https://devfeed.tech/tags/low-latency.md>), [memory-optimization](<https://devfeed.tech/tags/memory-optimization.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [optimization](<https://devfeed.tech/tags/optimization.md>), [release](<https://devfeed.tech/tags/release.md>), [releases](<https://devfeed.tech/tags/releases.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

ESPHome 2025.8.0 adds basic Nordic nRF52 support built on Zephyr, ESP-NOW device-to-device communication for ESP32 platforms, and MIPI DSI display support for ESP32-P4. It also introduces memory optimizations and requires Python 3.11 or newer.

### Source excerpt

ESPHome 2025.8.0 introduces the Nordic nRF52 platform built on Zephyr, ESP-NOW device-to-device communication, and MIPI DSI display support, and now requires Python 3.11 or newer.

[Next page](<https://devfeed.tech/topics/esphome.md?cursor=WyIyMDI1LTA4LTIwVDAwOjAwOjAwKzAwOjAwIiwgIjVlNDcxYTBlLTZhZTAtNGVkYS1hN2I1LTdiN2E2MjVlMGJkNiJd>)