# Matter Matter is an IP-based connectivity protocol and smart home standard for connecting compatible devices and systems. This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles. ## ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna DevFeed: [ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna]() Original publisher: [Read original article]() Author: Jean-Luc Aufranc (CNXSoft) Published: 2026-09-09T07:00:50Z Content type: news Language: en Sources: [CNX Software - Embedded Systems News]() Topics: [ESP32-C5](), [Raspberry Pi](), [Espressif](), [cpu](), [RISC-V](), [SOC](), [Bluetooth](), [wifi 6](), [zigbee](), [Matter](), [Embedded Systems](), [ESP-IDF]() Tags: [802-15-4](), [arduino](), [battery](), [ble](), [bluetooth](), [bluetooth-le](), [boot](), [c-c-plus-plus](), [development-board](), [embedded-systems](), [esp-idf](), [esp32](), [esp32-c5](), [espressif](), [gpio](), [hardware](), [iot](), [matter](), [news](), [port](), [raspberry-pi](), [risc-v](), [thread](), [usb](), [waveshare](), [wifi-6](), [zigbee]() ### AI overview The Waveshare ESP32-C5 Pico is a development board in the Raspberry Pi Pico form factor. It uses an ESP32-C5-MINI-1 series module with a RISC-V processor, dual-band WiFi 6, Bluetooth LE, and 802.15.4 support for Zigbee, Thread, and Matter. The board includes GPIO headers, USB-C, buttons, LEDs, and Li-Ion battery support, with variants offering PCB or external antennas. ### Source excerpt Waveshare ESP32-C5 Pico board brings the ESP32-C5 dual-band WiFi 6, Bluetooth LE, and 802.15.4 (Zigbee/Thread) SoC to the Raspberry Pi Pico form factor. The board features an ESP32-C5-MINI-1 Series module with PCB or external antenna, two 20-pin GPIO headers, a USB-C port for power and programming, Reset and Boot buttons, and a few LEDs. It also supports Li-Ion battery charging and discharging. Waveshare ESP32-C5 Pico specifications: Wireless module - ESP32-C5-MINI-1 or ESP32-C5-MINI-1U Wireless MCU - Espressif Systems ESP32-C5HF4 CPU Single-core 32-bit RISC-V processor @ up to 240 MHz Low-power RISC-V core @ 48 MHz acting as the main processor for power-sensitive applications Memory - 384 KB SRAM on-chip Storage - 320 KB ROM, 4MB SPI flash Wireless Dual-band (2.4/5 GHz) 802.11ax WiFi 6, 802.11b/g/n WiFi 4 backward compatibility WiFi modes: Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode Bluetooth 5.0 Low Energy (LE) with Mesh support, up [...] The post ESP32-C5 Pico board follows Raspberry Pi Pico form factor, ships with on-board or external antenna appeared first on CNX Software - Embedded Systems News. ## Home Assistant 2026.9 adds Modbus device integrations, Cloud voice processing, and Matter network mapping DevFeed: [Home Assistant 2026.9 adds Modbus device integrations, Cloud voice processing, and Matter network mapping]() Original publisher: [Read original article]() Author: Franck Nijhof Published: 2026-09-02T00:00:00Z Content type: release Language: en Sources: [Home Assistant]() Topics: [Home Assistant](), [Release notes](), [Modbus](), [Cloud](), [Matter](), [asr]() Tags: [cloud](), [core](), [home-assistant](), [matter](), [modbus](), [release](), [release-notes](), [security](), [speech](), [ui]() ### AI overview Home Assistant 2026.9 introduces Modbus integrations that can share a connection, new Cloud voice processing focused on speech-to-text, Security dashboard alerts and favorites, shared sources for History and Activity, a Matter network map, keyboard and sound navigation for charts, and 13 new integrations. ### Source excerpt Home Assistant 2026.9! 🎉 I'll be honest: Modbus has never been the flashiest part of Home Assistant. It quietly powers solar inverters, heat pumps, and energy meters, but only if you're comfortable hand-writing your own register map in YAML, a real wall that's kept a huge category of devices out of reach. This release finally makes room on the bus: integrations that already know how a device talks over Modbus, sharing a single connection instead of fighting over it, so you simply pick your device in the UI like anything else in Home Assistant. It won't show up in a screenshot, but modernizing Modbus is hands-down my favorite change this release. 🔧 I'm also really looking forward to jumping on the new Cloud voice processing myself and putting it through its paces. We're a household with a non-English main language, and if you've ever run a private voice assistant in one, you know exactly how fast accents and background noise trip things up. This new speech-to-text engine specifically targets those pain points, so I'm very curious to see how it holds up against my own accent. 😉 And there's plenty more: active alerts and favorites for the Security dashboard, a shared Sources panel for History and Activity, Activity that finally explains why something changed, a brand new network map for Matter, charts you can now navigate by keyboard and sound, and 13 new integrations! 🚀 One more thing before you dive in: we're at IFA Berlin this weekend! It's one of the largest consumer electronics expos out there, running September 4 to 8, 2026, and the Open Home Foundation has its own booth in the Smart Home hall: Hall 1.2, stand 1.2-153. If you're around, come find us and say hi. 👋 Enjoy the release! ../Frenck Home Assistant Cloud Seeing through the Cloud Test the new voice processing Float in to be a Cloud subscriber Active alerts and favorites for the Security dashboard A new Sources pane for History and Activity From what changed to why it changed Insights into your Matter world ## Build connected lighting systems with the ESP DALI component DevFeed: [Build connected lighting systems with the ESP DALI component]() Original publisher: [Read original article]() Author: John Lee Published: 2026-08-28T00:00:00Z Content type: tutorial Language: en Sources: [Blog on Developer Portal]() Topics: [ESP-IDF](), [Espressif](), [Embedded Software Dev](), [Internet of things](), [Protocol (disambiguation)](), [API](), [Matter](), [Home Assistant]() Tags: [api](), [architecture](), [blog](), [bridge](), [caching](), [dali](), [esp-idf](), [esp-iot-solution](), [espressif](), [firmware](), [lighting](), [matter](), [mqtt](), [ota](), [security]() ### AI overview This tutorial introduces the ESP DALI component, which implements an IEC 62386 master on Espressif SoCs using the RMT peripheral. It covers DALI control, commissioning, sensors, DT8 color gear, and a Matter-to-DALI bridge. ### Source excerpt The ESP DALI component implements an IEC 62386 master on the RMT peripheral, with support for commissioning, dimming, color control, sensors, and Matter-to-DALI bridges. ## One Java API for HomeKit, Matter, and Google Home DevFeed: [One Java API for HomeKit, Matter, and Google Home]() Original publisher: [Read original article]() Author: Shai Almog Published: 2026-08-24T00:00:00Z Content type: release Language: en Sources: [CodeName One]() Topics: [Matter](), [API](), [Homekit](), [Java](), [Google](), [Android]() Tags: [android](), [api](), [google](), [google-home](), [homekit](), [java](), [matter](), [release]() ### AI overview Codename One introduces a capability-driven Java API for smart-home accessories across HomeKit and Matter, with support for traits, scenes, change subscriptions, Matter commissioning, native backends, and simulation. The release documents platform-specific conversions, availability states, and setup requirements for Google Home APIs. ### Source excerpt Codename One now exposes smart-home accessories, traits, scenes, change subscriptions, and Matter commissioning through one capability-driven API with native and simulated backends. ## Announcing Espressif's Aliro SDK DevFeed: [Announcing Espressif's Aliro SDK]() Original publisher: [Read original article]() Author: John Lee Published: 2026-07-16T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [SDKs](), [Matter]() Tags: [aliro](), [blog](), [bluetooth-le](), [espressif](), [matter](), [mobile](), [nfc](), [protocol](), [sdk]() ### AI overview Espressif announces esp-aliro, an SDK for supporting the Aliro standardized mobile access-credentials protocol on Espressif SoCs. Initial support covers Aliro over NFC, while Bluetooth LE and UWB support are planned. ### Source excerpt Aliro brings mobile access credentials to Espressif devices and is compatible with Matter. We are excited to announce esp-aliro, an SDK that enables support for the Aliro standardized protocol on Espressif SoCs. ## The Matter upgrade you've been waiting for DevFeed: [The Matter upgrade you've been waiting for]() Original publisher: [Read original article]() Author: Ingo Fischer Published: 2026-06-23T00:00:00Z Content type: article Language: en Sources: [Home Assistant]() Topics: [Matter](), [Home Assistant](), [TypeScript](), [Open Source](), [Network](), [Homebridge]() Tags: [2026](), [announcements](), [border-router](), [bugs](), [hardware](), [homebridge](), [matter](), [open-source](), [recovery](), [speed](), [standards](), [thread](), [typescript](), [upgrade](), [visualization]() ### AI overview Home Assistant introduces a new Matter implementation built on matter.js, an open source TypeScript implementation of the Matter standard. After beta testing and community contributions, the update aims to improve stability, reduce bugs, and accelerate startup and recovery. It also adds network visualization, upgrades to Matter 1.5.1, and updates the OpenThread Border Router app for Thread 1.4 support. ### Source excerpt It started as a passion project. Yet in a few years matter.js has grown beyond my wildest expectations, becoming the backbone of the open source Matter ecosystem, and powering everything from Homebridge to openHAB, and even some commercial products. Ten months ago, I joined forces with the Open Home Foundation to work full time as Lead Developer of Matter. Shortly after, I donated matter.js to the foundation - giving it a new home where it would be safeguarded for the future. Together we announced our plans to take Matter support in Home Assistant in a completely new direction: we set out to rebuild the Open Home Foundation Matter Server - the engine that powers Matter in Home Assistant - on matter.js. After four months of beta testing, with our community fixing bugs and contributing new features along the way, today we're thrilled to present the newest version of Matter for Home Assistant! 🎉 The Open Home Foundation invests in important technology to make open alternatives possible, and our work is funded in part by everyone who subscribes to Home Assistant Cloud and buys official hardware from our commercial partners. The launch of a new Matter experience in Home Assistant shows what's possible with your support. 💪 Presenting the matter.js plans at the Connectivity Standards Alliance (CSA) Member Meeting in November 2025 (right), and returning in March 2026 as an Outstanding Contributor Award recipient (left). Serving up more with matter.js For those new to matter.js, it's an open source TypeScript implementation of the Matter standard. I built it to give developers and power users more speed and flexibility, and to make Matter better suited for open source development across the millions of homes that use Home Assistant. By running Matter in Home Assistant on matter.js, all of those benefits now flow directly into the platform. This major update brings greater stability for Matter in Home Assistant, fewer bugs, and faster start-up and recovery. It also comes with ## Sensereo joins Works with Home Assistant DevFeed: [Sensereo joins Works with Home Assistant]() Original publisher: [Read original article]() Author: Miranda Bishop Published: 2026-05-28T00:00:01Z Content type: news Language: en Sources: [Home Assistant]() Topics: [Home Assistant](), [Matter](), [Network]() Tags: [2026](), [battery](), [ecosystem](), [matter](), [products](), [safety](), [sensors](), [smart-home](), [thread](), [wireless](), [works-with-home-assistant]() ### AI overview Sensereo has joined the Works with Home Assistant program with Matter-based MS-1 smoke alarms and MSC-1 smoke and carbon monoxide alarms. The article explains how Matter and Thread support open, interoperable, energy-efficient smart-home devices while the alarms continue operating as regular alarms if the Thread network fails. Sensereo also plans to develop air quality sensors and other environmental sensing devices. ### Source excerpt We're sensing a change in the air this month as we welcome Sensereo to the Works with Home Assistant program 🎉. Specialists in environmental sensing, Sensereo brings Matter smoke and carbon monoxide (CO) alarms into the Home Assistant ecosystem - meaning more ways to keep your home open, safe, and sound. Built from a burning question... What happens if your smoke alarm goes off, but you're not there to hear it? It's an unsettling question, and one that led Roy Chen to found Sensereo in 2024. Driven to create safety devices that were equal parts reliable and resilient, Sensereo built the Matter-based MS-1 Smoke Alarm and MSC-1 Smoke and Carbon Monoxide Alarm, because as they put it: "every home deserves a system that will not fall silent when it matters most." It's just good sense For anyone unfamiliar, Matter is an open standard that lets smart home devices from different brands work together, regardless of who made them - no lock-in, no closed ecosystems. It's exactly the kind of open, interoperable technology the Open Home Foundation exists to champion. Thread operates on the same principle: it's an energy-efficient, wireless mesh network that connects devices directly to one another and can automatically reroute around disruptions. And for battery-powered alarms like Sensereo's, Thread's low-power design means fewer battery changes for devices that are always on duty. While we're talking about safety, it's important to note that if your Thread network did for any reason drop out, Sensereo's smoke and CO alarms will keep working as a "regular" alarm would - no smart home required. That peace of mind is central to how Sensereo thinks about their products, and having caught up with the team at CES 2026 earlier this year, we can tell you it's just the beginning. Air quality sensors and more are on the horizon, all building toward the same vision: to build an environmental intelligence system for the home that helps users understand and respond to their surroundings. "J ## Reciprocal knowledge elicitation: when the interview goes both ways DevFeed: [Reciprocal knowledge elicitation: when the interview goes both ways]() Original publisher: [Read original article]() Author: fidelitas.io Published: 2026-05-18T21:30:00Z Content type: opinion Language: en Sources: [fidelitas.io]() Topics: [Artificial Intelligence](), [Matter]() Tags: [agent](), [ai](), [human-ai-collaboration](), [interview](), [interviews](), [knowledge-management](), [tacit-knowledge]() ### AI overview The article explains reciprocal knowledge elicitation, an approach in which humans and AI jointly extract, refine, and validate expert knowledge. It argues that targeted follow-ups, summaries, contradiction detection, and gap-finding can better capture tacit knowledge than one-way interviews or forms. ### Source excerpt Traditional knowledge elicitation is a one-way street: an expert talks, a system listens. A new wave of human-agent research is rewriting that contract. Here's what reciprocal knowledge elicitation actually means, why it matters for capturing tacit knowledge, and how to design one without losing the plot. ## Quick update: May 2026 DevFeed: [Quick update: May 2026]() Original publisher: [Read original article]() Author: LoRa Left-handed operational Radio authority; Obviously Published: 2026-05-18T00:00:00Z Content type: news Language: en Sources: [Community blog on PINE64]() Topics: [Home Assistant](), [lora](), [Matter](), [Pinephone](), [zigbee](), [Kernel](), [Pinephone-Pro](), [USB](), [Crystal](), [Dongle]() Tags: [2026](), [community](), [crystal](), [dongle](), [eol](), [home-assistant](), [kernel](), [lcd](), [pinedio](), [pinephone](), [pinephone-pro](), [pinetime](), [pinevoice](), [protocol](), [table](), [update](), [usb](), [zigbee]() ### AI overview Pine64's May 2026 update covers the PineVoice Home Assistant speaker, PineTime and PineTime Pro hardware, PineDio USB LoRa development, and recent PineTab2, PinePhone, PinePhone Pro, and PineTab-V software updates. It also reports instability in the PineDio adapter caused by an overheating crystal oscillator. ### Source excerpt Table of contents Whats been going on recently? PineVoice PineTime/PineTime Pro LoRa? (Left-handed operational Radio authority, obviously) Important recent community updates: Do you have something to share? Contact Community PineStore Whats been going on recently? Hello everyone, we wanted to do a quick update on what's been happening recently. Life has been pretty busy but there's lots of nice things happening in the background that we'd like to share. PineVoice The PineVoice Home Assistant speaker (formally PineVox) is in its final stages. Production begins. Further on this, there will be limited bundle with this device which will include a PineVoice, Zigbee dongle, power supply and two matter modules. Pair it with a SBC of choice and run your Home Assistant instance locally! PineTime/PineTime Pro The current PineTime LCD is EOL and a new one is replacing it, though it is essentially the same display. These will be shipping in the next PineTime batch. New PineTime Pro samples have been received by developers. Shiny! LoRa? (Left-handed operational Radio authority, obviously) The PineDio USB LoRa Adapter is at the focus of a new effort to begin progress on potential new LoRa devices. MeshCore is the current protocol target for the USB LoRa Adapter along with help from the pyMC_core library project. The current problem with the device is that the crystal oscillator is heating up too much and can cause clock frequency drifting instability. In a nutshell that means your messages come out garbled. This may eventually be fixed with a TXCO (Temperature-Compensated Crystal Oscillator) to maintain a stable clock frequency. Important recent community updates: DanctNIX PineTab2 updates (including factory image) Adam Piggz: PinePhone, PinePhone Pro, PineTab2 all updated to kernel 7.0, and improved USB config. Zypper ref and dup to update. machaddr@mastodon.sdf.org: with their new Gentoo PineTab-V image Do you have something to share? Do you have news to share with the communit ## Espressif - Introducing Matter Cameras DevFeed: [Espressif - Introducing Matter Cameras]() Original publisher: [Read original article]() Author: John Lee Published: 2026-01-21T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [Matter](), [ESP32](), [SDK](), [Streaming](), [WebRTC](), [Security]() Tags: [announcement](), [blog](), [camera](), [cameras](), [encryption](), [esp32](), [esp32-p4](), [espressif](), [iot](), [matter](), [sdk](), [security](), [streaming](), [webrtc]() ### AI overview Espressif announces Matter-based camera support for its SoCs, including the ESP32 series, using Matter 1.5 and the Espressif Matter SDK. The implementation uses WebRTC and supports interoperable camera devices, encrypted live streaming, recorded media upload, privacy masking, motion detection, and digital pan-tilt-zoom. ### Source excerpt This article describes the Matter camera features introduced in Matter 1.5 and discusses camera support for the ESP32 series of SoCs using Espressif Matter SDK ## Thread Network Credentials Sharing DevFeed: [Thread Network Credentials Sharing]() Original publisher: [Read original article]() Author: John Lee Published: 2026-01-06T00:00:00Z Content type: tutorial Language: en Sources: [Blog on Developer Portal]() Topics: [Protocol (disambiguation)](), [interoperability](), [Matter](), [migration](), [User Experience](), [m5stack]() Tags: [blog](), [border-router](), [connectivity](), [demo](), [fragmentation](), [interoperability](), [m5stack](), [matter](), [migration](), [network](), [onboarding](), [thread](), [user-experience]() ### AI overview This article introduces Thread Credentials Sharing, a Thread 1.4 feature for securely sharing administrative access and network credentials with new Thread Border Routers and devices. It explains Operational Dataset credentials, deployment benefits, usage scenarios, and a demonstration using an M5Stack Thread Border Router and the SmartThings app. ### Source excerpt This article introduces the Thread Credentials Sharing feature, explains why it is important, how it works, and provides a demo using M5Stack Thread Border Router and SmartThings app. ## ESP-ZeroCode adds RED-DA documentation support for Matter device firmware DevFeed: [ESP-ZeroCode adds RED-DA documentation support for Matter device firmware]() Original publisher: [Read original article]() Author: John Lee Published: 2025-12-08T00:00:00Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [Matter](), [EN 18031](), [Red](), [Development](), [Framework](), [Security]() Tags: [blog](), [compliance](), [cryptography](), [en-18031](), [espressif](), [firmware](), [matter](), [ota](), [product-development](), [redda](), [zerocode]() ### AI overview Espressif describes an ESP-ZeroCode integration that generates Matter device firmware alongside a RED-DA-oriented documentation starter package. The package includes pre-filled templates covering platform security, network and secure-update mechanisms, and EN 18031 mappings; manufacturers must add device-specific information to complete the technical file. ### Source excerpt In this blog we will introduce how combining the Espressif RED-DA compliance framework along with the ESP ZeroCode platform can help accelerate your product development ## Building Hardware-Enforced Trust into Matter Devices with ESP-TEE DevFeed: [Building Hardware-Enforced Trust into Matter Devices with ESP-TEE]() Original publisher: [Read original article]() Author: John Lee Published: 2025-09-12T00:00:00Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [trusted-execution-environment](), [ESP32-C6](), [RISC-V](), [Internet of things](), [Security]() Tags: [attestation](), [blog](), [esp-tee](), [esp32-c6](), [iot](), [matter](), [risc-v](), [security](), [verification]() ### AI overview This article explains how Espressif's ESP-TEE framework integrates with Matter on ESP32-C6 RISC-V SoCs. It describes hardware-isolated protection for device credentials, cryptographic operations, secure storage, OTA updates, attestation, and Matter DAC and NOC keys. ### Source excerpt As security expectations rise globally - driven by region-specific cybersecurity regulations - safeguarding device credentials has become critical for IoT manufacturers. This article explains how the ESP-TEE framework integrates with Matter and demonstrates building secure products using the Espressif RISC-V SoCs, showcasing hardware-enforced security that can resist scalable remote software attacks. ## openHAB 5.0 Release DevFeed: [openHAB 5.0 Release]() Original publisher: [Read original article]() Published: 2025-07-21T19:00:00Z Content type: release Language: en Sources: [openHAB]() Topics: [releases](), [Matter](), [Scripting](), [GitHub](), [pull-requests](), [Code](), [Java]() Tags: [code](), [features](), [github](), [improvements](), [java](), [new-features](), [pull-requests](), [release](), [release-notes](), [scripting](), [tooling]() ### AI overview openHAB 5.0 is a major release with Matter support, a new Python Scripting add-on, upgraded dependencies, Java 21, virtual threads, and 64-bit-only support. The release includes breaking changes and contributions across the project's repositories. ### Source excerpt As this is a major release, we have a number of breaking changes that are required for the new features and improvements. So, please have a look at our official release notes to learn about all breaking changes, new add-ons, enhancements and fixes. ## ESP-Knob: A multifunctional smart controller with the ESP32-H2 DevFeed: [ESP-Knob: A multifunctional smart controller with the ESP32-H2]() Original publisher: [Read original article]() Author: John Lee Published: 2025-03-27T10:37:17Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [ESP32](), [Hardware](), [Embedded Software Dev](), [interoperability](), [Home Assistant](), [Matter](), [Espressif]() Tags: [battery](), [ble](), [ble-adv](), [ble-hid](), [ble-mesh](), [blog](), [debugging](), [esp32](), [esp32-h2](), [espressif](), [firmware](), [hardware](), [home-assistant](), [matter](), [re](), [usb](), [zigbee]() ### AI overview The article introduces Espressif's ESP-Knob, a multifunctional smart controller powered by the ESP32-H2. It describes support for Home Assistant and wireless protocols including BLE-HID, Thread, Matter, ESP-BLE-MESH, and Zigbee, along with its push-rotary control, magnetic base, and battery or USB power options. ### Source excerpt This article provides an overview of the ESP-Knob, its features, and functionality. It also details the hardware design and outlines the firmware framework that supports its operation. ## Introducing ESP LowCode Matter: Simplified Device Development DevFeed: [Introducing ESP LowCode Matter: Simplified Device Development]() Original publisher: [Read original article]() Author: John Lee Published: 2025-02-27T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [Espressif](), [Development](), [SDKs]() Tags: [announce](), [blog](), [development](), [esp](), [esp32](), [espressif](), [firmware](), [flashing](), [low-code](), [matter](), [qr-code](), [sdk]() ### AI overview Espressif introduces ESP LowCode Matter, a solution that separates system firmware from application firmware. Espressif maintains the system firmware, including Matter protocol, OTA upgrade, and security complexity, while device makers customize hardware interfacing and application logic. ### Source excerpt At Espressif Systems, we are continuously striving to make device development easier for device makers. For Matter devices, we launched the ESP ZeroCode solution, simplifying the device development by removing the software development efforts. Allowing product customizations to a limited extent, ESP ZeroCode is well-suited for those who want to launch connected products without having to build them from scratch using the ESP Matter or the Connectedhomeip (CHIP) SDK. ## FOSDEM 2025 Recap DevFeed: [FOSDEM 2025 Recap]() Original publisher: [Read original article]() Published: 2025-02-05T15:00:00Z Content type: news Language: en Sources: [openHAB]() Topics: [FOSDEM](), [Open Source](), [Matter](), [Automation]() Tags: [2025](), [alternatives](), [community](), [fosdem](), [home-automation](), [matter](), [open-source](), [recap]() ### AI overview A recap of FOSDEM 2025, where the openHAB Foundation hosted a booth and discussed open-source home automation, Matter, energy management, monitoring, and technical topics with developers and users. ### Source excerpt Many conversations have shown, that the attendees of the booth recognize the benefits and importance of open-source solutions at the heart of their home, no matter which open-source platform is actually used. In the open-source community, it is important to understand that openHAB and other platforms are no competitors, but rather alternatives with their unique strengths. ## Matter: Improvements to Espressif DAC Provisioning Service DevFeed: [Matter: Improvements to Espressif DAC Provisioning Service]() Original publisher: [Read original article]() Author: John Lee Published: 2024-10-01T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [Espressif](), [Provisioning](), [Cloud]() Tags: [attestation](), [blog](), [certificates](), [cloud](), [devices](), [esp32](), [espressif](), [firmware](), [iot](), [matter](), [private-key](), [provisioning](), [security](), [signing](), [trust](), [update]() ### AI overview Espressif describes updates to its Matter DAC provisioning service, including support for customer-factory manufacturing and secure delivery of Device Attestation Certificates for in-field devices upgrading to Matter. ### Source excerpt Espressif's Secure Manufacturing Service, which was launched last year, has assisted many customers in simplifying their manufacturing. Since a year from launch, we worked with hundreds of customers and served millions of modules that were manufactured with this service. ## What's New with ESP ZeroCode DevFeed: [What's New with ESP ZeroCode]() Original publisher: [Read original article]() Author: John Lee Published: 2024-04-28T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [ESP32](), [Internet of things](), [MQTT]() Tags: [blog](), [esp32](), [esp32-c2](), [esp32-h2](), [espressif](), [firmware](), [interest](), [iot](), [launch](), [mqtt](), [ota](), [works-with-home-assistant](), [zero-code](), [zerocode]() ### AI overview Espressif reviews updates to ESP ZeroCode after eight months, reporting user activity, Matter-certified devices, expanded automated quality testing, new single-chip and two-chip solution types, and broader ecosystem partnerships. ### Source excerpt The Fastest Way to Launch Matter-enabled Products It's been about 8 months since we launched ESP ZeroCode. For all these months, continuous interest and customer activity has kept us busy. Let's look at some of the highlights of what's new with ESP ZeroCode. Customer Interest# Over 11,000 users across 125 countries have visited ESP ZeroCode, building various kinds of Matter-enabled products. Every week we get numerous queries and requests for samples or product-related queries. ## Announcing ESP ZeroCode ExL Module DevFeed: [Announcing ESP ZeroCode ExL Module]() Original publisher: [Read original article]() Author: John Lee Published: 2023-11-12T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [Matter](), [AWS IoT Core](), [ESP32-C6](), [Microcontroller](), [Hardware]() Tags: [aws](), [aws-iot-core](), [blog](), [bluetooth](), [esp32](), [esp32-c6](), [espressif](), [hardware](), [iot](), [matter](), [ota](), [security](), [wi-fi-6]() ### AI overview Espressif announced the ESP ZeroCode ExL connectivity module, developed with AWS and powered by AWS IoT ExpressLink. Based on the ESP32-C6, it provides Wi-Fi 6, Bluetooth 5 LE, and 802.15.4 connectivity, with built-in Matter and cloud connectivity software exposed through an AT-command serial interface. ### Source excerpt Announcing ESP ZeroCode ExL powered by AWS IoT ExpressLink -- Simplifying Matter-compatible Cloud-connected Devices As a part of our efforts to make the development of Matter protocol-enabled devices easy, Espressif announced ESP ZeroCode modules and ESP ZeroCode Console earlier this year. These ESP ZeroCode modules are well-suited for Matter connectivity for simple devices such as lighting fixtures, switches, sockets, blind controllers, and sensors. ## Matter and Certificate Revocation DevFeed: [Matter and Certificate Revocation]() Original publisher: [Read original article]() Author: John Lee Published: 2023-10-23T00:00:00Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [Security]() Tags: [blog](), [certificates](), [devices](), [esp32](), [exploit](), [iot](), [matter](), [security](), [trust]() ### AI overview This article explains certificate revocation in Matter, where devices use Device Attestation Certificates within a PKI-based security model. It describes Certificate Revocation Lists, how revocation affects PAI and DAC certificates, checks during commissioning, user notification, and vendor replacement of a device's DAC. ### Source excerpt In the previous blogs, we discussed various aspects of Matter. One of which was the Matter Security Model. Matter's Security Model is based on PKI infrastructure, a widely used security model for securing communications and establishing trust and identity in the digital world. (To know more about Matter's Security Model you can read this blog). ## Announcing ESP ZeroCode DevFeed: [Announcing ESP ZeroCode]() Original publisher: [Read original article]() Author: John Lee Published: 2023-08-20T00:00:00Z Content type: release Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [Matter](), [web applications](), [Embedded Software Dev]() Tags: [blog](), [esp](), [esp32](), [firmware](), [hardware](), [iot](), [matter](), [product](), [security](), [web](), [zerocode]() ### AI overview Espressif announces ESP ZeroCode, a web application for preparing Matter-certifiable firmware from product requirements, desired features, and hardware configuration. Users can test generated firmware on physical hardware and order pre-flashed ESP ZeroCode modules. ### Source excerpt Today Espressif is launching the ESP ZeroCode. This is a web application that lets you quickly prepare Matter-certifiable firmware, as per your requirements, in just a few clicks. You describe the kind of product you wish to create, the features you want to have, and its hardware configuration, that's it. You can instantly try out the generated firmware on the physical hardware. If you don't like something, you go back and tweak it all you want. ## Espressif Thread Border Router DevFeed: [Espressif Thread Border Router]() Original publisher: [Read original article]() Author: John Lee Published: 2023-06-14T00:00:00Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [Espressif](), [networking](), [ESP-IDF](), [Matter]() Tags: [announce](), [blog](), [border-router](), [development-kit](), [discovery](), [esp-idf](), [esp32](), [espressif](), [ethernet](), [iot](), [ipv4](), [matter](), [multicast](), [open-thread](), [thread](), [wi-fi]() ### AI overview Espressif's Thread Border Router solution received Thread Group certification, and its accompanying development kit was officially released. The article describes its ESP-IDF-based architecture, networking components, and features including IPv6 connectivity, service discovery, multicast forwarding, and NAT64. ### Source excerpt We are glad to announce that the Espressif Thread Border Router (ESP Thread BR) solution has received certification from the Thread Group, and the accompanying development kit has now been officially released. This blog post will delve into the technical aspects of the solution and explore the benefits it offers, facilitating faster time-to-market for our customers' products. ## Accelerating Matter Device Manufacturing DevFeed: [Accelerating Matter Device Manufacturing]() Original publisher: [Read original article]() Author: John Lee Published: 2023-02-19T00:00:00Z Content type: article Language: en Sources: [Blog on Developer Portal]() Topics: [Matter](), [Espressif](), [Internet of things](), [Security](), [Provisioning]() Tags: [blog](), [certificates](), [esp32](), [espressif](), [iot](), [matter](), [private-key](), [provisioning](), [security]() ### AI overview This article explains Espressif's Matter Pre-Provisioning Service, which provides modules securely pre-programmed with the certificates and other unique details required by Matter devices. It describes Device Attestation, Device Attestation Certificates, certificate authorities, and protection of the DAC private key during manufacturing. ### Source excerpt Given the latest developments in the IoT industry, there is a strong rush towards building Matter enabled smart devices. (If you are new to Matter, please read up about Matter in our series of blog posts here). We have been actively working on creating solutions that help accelerate our customers to build and launch Matter-enabled devices faster and that too in a cost-effective way. [Next page]()