# seeed studio

Seeed Studio, also known as Seeed Technology, is an open-source hardware provider focused on edge AI, robotics, and smart sensor systems.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Review of Seeed Studio 4.26″ Mono and 7.3″ Color e-paper Kit with OpenDisplay and Home Assistant

DevFeed: [Review of Seeed Studio 4.26″ Mono and 7.3″ Color e-paper Kit with OpenDisplay and Home Assistant](<https://devfeed.tech/articles/review-of-seeed-studio-4-26-mono-and-7-3-color-e-paper-kit-with-opendisplay-and-home-assistant-137173.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/17/review-seeed-studio-4-26-mono-and-7-3-color-e-paper-kit-with-opendisplay-and-home-assistant/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-17T11:05:39Z

Content type: article

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [Image](<https://devfeed.tech/topics/image.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [button](<https://devfeed.tech/tags/button.md>), [color](<https://devfeed.tech/tags/color.md>), [dashboards](<https://devfeed.tech/tags/dashboards.md>), [display](<https://devfeed.tech/tags/display.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [epaper](<https://devfeed.tech/tags/epaper.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hmi](<https://devfeed.tech/tags/hmi.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [images](<https://devfeed.tech/tags/images.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [mcu](<https://devfeed.tech/tags/mcu.md>), [mono](<https://devfeed.tech/tags/mono.md>), [nordic-semi](<https://devfeed.tech/tags/nordic-semi.md>), [nrf52840](<https://devfeed.tech/tags/nrf52840.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [opendisplay](<https://devfeed.tech/tags/opendisplay.md>), [review](<https://devfeed.tech/tags/review.md>), [reviews](<https://devfeed.tech/tags/reviews.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [testing](<https://devfeed.tech/tags/testing.md>)

### AI overview

The kits provide a ready-to-use local e-paper display path to Home Assistant through OpenDisplay firmware and BLE. Images can be sent from a browser using Web Bluetooth; OpenDisplay Toolbox configures devices over Bluetooth and can flash or restore firmware over USB-C with Chrome or Edge. In Home Assistant, the built-in OpenDisplay integration (Core 2026.4+) can use an ESPHome BLE proxy when the server's Bluetooth range is insufficient. Automations render sensor data as 800x480 PNGs in Python and upload them on a schedule; the review reports refreshes of about 6 seconds for the 4.26-inch monochrome model and 35 seconds for the six-color 7.3-inch model. The mono screen supports partial refresh and is presented as better for frequently changing readings; the larger color screen shares the same resolution and suits less frequent updates, but refreshes more slowly. Button events arrive immediately, though page changes take long enough that the review suggests buttons may be more useful as automation triggers than for quickly switching views. Claimed battery life is two years for mono at 15-minute updates and one year for color at two-hour updates.

### Source excerpt

Seeed Studio sent us two e-paper kits preloaded with OpenDisplay open-source firmware for review: the OpenDisplay 4.26″ Mono Kit and OpenDisplay 7.3″ Color Kit, both powered by a Nordic nRF52840 low-power Bluetooth LE microcontroller. This review focuses on practical use of the preinstalled OpenDisplay firmware: sending images from a browser, configuring the devices with OpenDisplay Toolbox, and connecting them to Home Assistant to create dashboards that update automatically with data from around the home. Unboxing Seeed Studio OpenDisplay e-paper kits and hardware overview Both models arrive fully assembled, with a display, a driver board, a XIAO nRF52840 Plus board, a battery, and a white 3D-printed enclosure. The only difference between the two kits is the display; the MCU, 2,000 mAh battery, and number of buttons are the same. Both models have a power switch, a reset button, three push buttons, a USB-C port, and one mounting hole. The 3D enclosure [...] The post Review of Seeed Studio 4.26″ Mono and 7.3″ Color e-paper Kit with OpenDisplay and Home Assistant appeared first on CNX Software - Embedded Systems News.

## Monthly Wrap-Up for October 2026:Global Community, Open-Source Hardware & Physical AI in Action

DevFeed: [Monthly Wrap-Up for October 2026:Global Community, Open-Source Hardware & Physical AI in Action](<https://devfeed.tech/articles/monthly-wrap-up-for-october-2026-global-community-open-source-hardware-physical-ai-in-action-129675.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/11/monthly-wrap-up-for-october-2026global-community-open-source-hardware-physical-ai-in-action/>)

Author: amiie

Published: 2026-11-11T09:19:39Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Physical AI](<https://devfeed.tech/topics/physical-ai.md>), [llama.cpp](<https://devfeed.tech/topics/llama-cpp.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [ai](<https://devfeed.tech/tags/ai.md>), [community](<https://devfeed.tech/tags/community.md>), [feature](<https://devfeed.tech/tags/feature.md>), [global](<https://devfeed.tech/tags/global.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [monthly](<https://devfeed.tech/tags/monthly.md>), [news](<https://devfeed.tech/tags/news.md>), [october](<https://devfeed.tech/tags/october.md>), [october-2026](<https://devfeed.tech/tags/october-2026.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-hardware](<https://devfeed.tech/tags/open-source-hardware.md>), [physical-ai](<https://devfeed.tech/tags/physical-ai.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [sensecap](<https://devfeed.tech/tags/sensecap.md>), [wrap](<https://devfeed.tech/tags/wrap.md>)

### AI overview

Seeed's October 2026 roundup reports global workshops and events alongside new open-hardware and Physical AI resources. Technical releases include a LoRa approach for distributing RTK corrections to drone fleets, ROS 2 sensor-fusion material for mobile robot localization, Physical AI and SO-ARM courses, and wiki guides for reCamera Pro, Jetson, XIAO STM32C5, and edge-vision designs. Product and field highlights include the All-in-One XIAO Development Hub, SenseCAP weather-station deployments across infrastructure and agriculture, and a Ningxia greenhouse case study using sensor data to guide decisions and reduce tomato cracking. The text lists activities and resource releases but provides limited performance evidence or detailed comparisons.

### Source excerpt

Hey community, Welcome to our October 2026 Monthly Wrap-up! This month we were on the road The post Monthly Wrap-Up for October 2026:Global Community, Open-Source Hardware & Physical AI in Action appeared first on Latest News from Seeed Studio.

## 🚀Meet the Upgraded Seeed Fusion PCB Ordering Page

DevFeed: [🚀Meet the Upgraded Seeed Fusion PCB Ordering Page](<https://devfeed.tech/articles/meet-the-upgraded-seeed-fusion-pcb-ordering-page-129673.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/11/%f0%9f%9a%80meet-the-upgraded-seeed-fusion-pcb-ordering-page/>)

Author: Ginny Zhang

Published: 2026-11-11T07:51:14Z

Content type: release

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [advanced](<https://devfeed.tech/tags/advanced.md>), [built-in](<https://devfeed.tech/tags/built-in.md>), [design](<https://devfeed.tech/tags/design.md>), [fusion](<https://devfeed.tech/tags/fusion.md>), [layer](<https://devfeed.tech/tags/layer.md>), [news](<https://devfeed.tech/tags/news.md>), [options](<https://devfeed.tech/tags/options.md>), [ordering](<https://devfeed.tech/tags/ordering.md>), [orders](<https://devfeed.tech/tags/orders.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [pcb-manufacture-and-assembly](<https://devfeed.tech/tags/pcb-manufacture-and-assembly.md>), [pcba](<https://devfeed.tech/tags/pcba.md>), [preview](<https://devfeed.tech/tags/preview.md>), [pricing](<https://devfeed.tech/tags/pricing.md>), [processes](<https://devfeed.tech/tags/processes.md>), [quality-control](<https://devfeed.tech/tags/quality-control.md>), [requirements](<https://devfeed.tech/tags/requirements.md>), [review](<https://devfeed.tech/tags/review.md>), [seeed-fusion](<https://devfeed.tech/tags/seeed-fusion.md>), [seeed-studio-fusion](<https://devfeed.tech/tags/seeed-studio-fusion.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [standard](<https://devfeed.tech/tags/standard.md>)

### AI overview

Seeed Fusion's upgraded PCB ordering page groups orders into Standard PCB and Advanced PCB based on board material and layer count, and presents manufacturing options in one place for comparison. Options are organized into Basic Information, PCB Parameters, Special Processes, and Quality Control, with an expanded range of manufacturing choices. A visible pricing summary tracks price changes as specifications are adjusted. After Gerber files are uploaded, a built-in preview lets users review the design alongside their manufacturing selections without opening a separate viewer.

### Source excerpt

We've upgraded the Seeed Fusion PCB ordering page to make ordering your PCBs easier and The post 🚀Meet the Upgraded Seeed Fusion PCB Ordering Page appeared first on Latest News from Seeed Studio.

## Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating

DevFeed: [Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating](<https://devfeed.tech/articles/seeed-studio-xiao-stm32c5-development-board-features-dual-can-fd-and-a-6-axis-imu-with-programmable-heating-123536.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/09/seeed-studio-xiao-stm32c5-development-board-features-dual-can-fd-and-a-6-axis-imu-with-programmable-heating/>)

Author: Debashis Das

Published: 2026-11-09T12:00:41Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Arm](<https://devfeed.tech/topics/arm.md>), [Robotics](<https://devfeed.tech/topics/robotics.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [automation](<https://devfeed.tech/tags/automation.md>), [battery](<https://devfeed.tech/tags/battery.md>), [can](<https://devfeed.tech/tags/can.md>), [can-bus](<https://devfeed.tech/tags/can-bus.md>), [cortex-m33](<https://devfeed.tech/tags/cortex-m33.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [flash](<https://devfeed.tech/tags/flash.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [imu](<https://devfeed.tech/tags/imu.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [motion-sensing](<https://devfeed.tech/tags/motion-sensing.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [rtos](<https://devfeed.tech/tags/rtos.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [stm32](<https://devfeed.tech/tags/stm32.md>), [stmicro-stm32](<https://devfeed.tech/tags/stmicro-stm32.md>), [stmicroelectronics](<https://devfeed.tech/tags/stmicroelectronics.md>), [usb-c](<https://devfeed.tech/tags/usb-c.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

The XIAO STM32C5 pairs a 144 MHz STM32C5A3CG Arm Cortex-M33 with two CAN FD controllers and a 6-axis LSM6DS3TR-C IMU whose temperature can be regulated by PWM-controlled heating resistors to help reduce temperature-related motion-measurement drift. FDCAN2 connects to an onboard CAN FD transceiver and CANH/CANL pads; FDCAN1 exposes TX/RX for an external transceiver. The onboard 120 Ω termination is enabled by default and can be disconnected. The board also has 256 KB SRAM, 1 MB internal and 16 MB external flash, USB-C, battery charging, and XIAO-format expansion headers. Documentation and examples are listed for STM32CubeIDE, PlatformIO with Zephyr, and MicroPython. The text lists prices of $18.85 on AliExpress and $9.90 at Seeed Studio, or $10.90 for the pre-soldered version, before taxes and shipping.

### Source excerpt

Seeed Studio XIAO STM32C5 is the company's first XIAO development board based on an STMicroelectronics MCU, namely a 144 MHz STM32C5A3CG Arm Cortex-M33 microcontroller. It features two CAN FD controllers and a 6-axis IMU with programmable heating for robotics, industrial control, and motion-sensing applications. The board also includes 16MB of external flash, a 48 MHz external crystal, a USB-C port, and battery charging circuitry. One CAN FD channel is connected to an onboard transceiver, while the second requires an external transceiver. The integrated IMU heater allows firmware to control sensor temperature and reduce measurement drift from temperature changes. XIAO STM32C5 specifications: MCU - STMicroelectronics STM32C5A3CG CPU - 144 MHz Arm Cortex-M33 with FPU and DSP instructions Memory - 256KB SRAM Storage - 1MB internal flash Storage - 16MB external flash USB - USB Type-C port with USB 2.0 Full-Speed support (12 Mbps) CAN Bus 2x CAN FD controllers (FDCAN1 and [...] The post Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating appeared first on CNX Software - Embedded Systems News.

## SeeedStudio at Cameroon International Tech Summit 2026 #CITS2026

DevFeed: [SeeedStudio at Cameroon International Tech Summit 2026 #CITS2026](<https://devfeed.tech/articles/seeedstudio-at-cameroon-international-tech-summit-2026-cits2026-121497.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/06/seeedstudio-at-cameroon-international-tech-summit/>)

Author: Dessap Loic

Published: 2026-11-06T13:52:47Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [meshtastic](<https://devfeed.tech/topics/meshtastic.md>)

Tags: [17](<https://devfeed.tech/tags/17.md>), [about](<https://devfeed.tech/tags/about.md>), [academia](<https://devfeed.tech/tags/academia.md>), [accelerate](<https://devfeed.tech/tags/accelerate.md>), [accessible](<https://devfeed.tech/tags/accessible.md>), [africa](<https://devfeed.tech/tags/africa.md>), [agriculture](<https://devfeed.tech/tags/agriculture.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-applications](<https://devfeed.tech/tags/ai-applications.md>), [ai-hardware](<https://devfeed.tech/tags/ai-hardware.md>), [ai-robotics](<https://devfeed.tech/tags/ai-robotics.md>), [ai-sandbox](<https://devfeed.tech/tags/ai-sandbox.md>), [all](<https://devfeed.tech/tags/all.md>), [community](<https://devfeed.tech/tags/community.md>), [international](<https://devfeed.tech/tags/international.md>), [news](<https://devfeed.tech/tags/news.md>), [october](<https://devfeed.tech/tags/october.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [studio](<https://devfeed.tech/tags/studio.md>), [summit](<https://devfeed.tech/tags/summit.md>), [tech](<https://devfeed.tech/tags/tech.md>)

### AI overview

At the Cameroon International Tech Summit 2026 in Yaoundé, Seeed Studio showcased open-source hardware as an AI Sandbox Partner and discussed locally adapted technology with developers and public-sector representatives. Demos included the Seeed Weather Station and environmental sensors for microclimate monitoring; LoRaWAN trackers and Meshtastic solar nodes for low-power, long-range or off-grid connectivity; and reComputer devices, reBot Arm, and Mission Packs for local edge AI and robotics without high-latency cloud reliance. Discussions with Cameroon's Ministry of Posts and Telecommunications focused on using accessible sensors, hardware, and edge AI to support digital transformation and national infrastructure goals. The excerpt also includes favorable participant testimonials about education, decentralized connectivity, and applications in agriculture and logistics.

### Source excerpt

From October 15 to 17, the vibrant tech community of Cameroon gathered at the iconic The post SeeedStudio at Cameroon International Tech Summit 2026 #CITS2026 appeared first on Latest News from Seeed Studio.

## Introducing reGoggles: Building Open Smart Goggles Together

DevFeed: [Introducing reGoggles: Building Open Smart Goggles Together](<https://devfeed.tech/articles/introducing-regoggles-building-open-smart-goggles-together-121124.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/06/introducing-regoggles-building-open-smart-goggles-together/>)

Author: Elena Tang

Published: 2026-11-06T09:17:07Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [smartdevices](<https://devfeed.tech/topics/smartdevices.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ai-applications](<https://devfeed.tech/tags/ai-applications.md>), [ai-assistance](<https://devfeed.tech/tags/ai-assistance.md>), [ai-glasses](<https://devfeed.tech/tags/ai-glasses.md>), [ai-wearable](<https://devfeed.tech/tags/ai-wearable.md>), [applications](<https://devfeed.tech/tags/applications.md>), [audio](<https://devfeed.tech/tags/audio.md>), [audio-video](<https://devfeed.tech/tags/audio-video.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [build](<https://devfeed.tech/tags/build.md>), [camera](<https://devfeed.tech/tags/camera.md>), [capture](<https://devfeed.tech/tags/capture.md>), [chip](<https://devfeed.tech/tags/chip.md>), [data-transmission](<https://devfeed.tech/tags/data-transmission.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [feature](<https://devfeed.tech/tags/feature.md>), [goggles](<https://devfeed.tech/tags/goggles.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [industrial-ai](<https://devfeed.tech/tags/industrial-ai.md>), [news](<https://devfeed.tech/tags/news.md>), [open](<https://devfeed.tech/tags/open.md>), [platform](<https://devfeed.tech/tags/platform.md>), [regoggles](<https://devfeed.tech/tags/regoggles.md>), [smart-glasses](<https://devfeed.tech/tags/smart-glasses.md>), [smart-goggles](<https://devfeed.tech/tags/smart-goggles.md>), [tech](<https://devfeed.tech/tags/tech.md>), [wearabel-ai](<https://devfeed.tech/tags/wearabel-ai.md>)

### AI overview

reGoggles is a working but unfinished open smart-goggles platform that captures, records, and streams a worker's first-person view to edge AI, cloud AI, or remote experts. Its core path is operational, with multimodal recording, synchronized streams, and expansion interfaces; final specifications and features may still change. The main-chip firmware is fully open source, while the secondary chip's audio and Bluetooth firmware is closed but exposes integration interfaces. The SDK supports audio and video streaming, though Wi-Fi sessions should be limited in duration and resolution because of power use and heat. AR is not supported currently and remains under evaluation. Seeed targets an official launch in Q1 2027, with first test units expected in early 2027, and plans an Early Builder Program for project builders, beta testers, and reviewers to contribute real-world feedback.

### Source excerpt

reGoggles is an open smart goggles platform designed for industrial AI assistance, with a focus The post Introducing reGoggles: Building Open Smart Goggles Together appeared first on Latest News from Seeed Studio.

## Open Source AI Voice Recorder: Why Firmware Freedom Matters

DevFeed: [Open Source AI Voice Recorder: Why Firmware Freedom Matters](<https://devfeed.tech/articles/open-source-ai-voice-recorder-why-firmware-freedom-matters-119858.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/06/open-source-ai-voice-recorder-firmware-sdk/>)

Author: Elena Tang

Published: 2026-11-06T03:20:02Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [Open Source](<https://devfeed.tech/topics/open-source.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [open source maintenance](<https://devfeed.tech/topics/open-source-maintenance.md>)

Tags: [2](<https://devfeed.tech/tags/2.md>), [3](<https://devfeed.tech/tags/3.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-pendant](<https://devfeed.tech/tags/ai-pendant.md>), [ai-recorder](<https://devfeed.tech/tags/ai-recorder.md>), [ai-voice-recorder](<https://devfeed.tech/tags/ai-voice-recorder.md>), [audio](<https://devfeed.tech/tags/audio.md>), [build](<https://devfeed.tech/tags/build.md>), [can](<https://devfeed.tech/tags/can.md>), [capture](<https://devfeed.tech/tags/capture.md>), [conversations](<https://devfeed.tech/tags/conversations.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [feature](<https://devfeed.tech/tags/feature.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [matters](<https://devfeed.tech/tags/matters.md>), [more](<https://devfeed.tech/tags/more.md>), [news](<https://devfeed.tech/tags/news.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [open-source-ai](<https://devfeed.tech/tags/open-source-ai.md>), [recorder](<https://devfeed.tech/tags/recorder.md>), [respeaker](<https://devfeed.tech/tags/respeaker.md>), [respeaker-clip](<https://devfeed.tech/tags/respeaker-clip.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [source](<https://devfeed.tech/tags/source.md>), [studio](<https://devfeed.tech/tags/studio.md>), [tech](<https://devfeed.tech/tags/tech.md>), [voice](<https://devfeed.tech/tags/voice.md>), [voice-a](<https://devfeed.tech/tags/voice-a.md>), [voice-recorder](<https://devfeed.tech/tags/voice-recorder.md>), [wearable-ai](<https://devfeed.tech/tags/wearable-ai.md>), [wearable-ai-recorder](<https://devfeed.tech/tags/wearable-ai-recorder.md>)

### AI overview

Open firmware, SDKs, local recording, and documented recovery paths give the Seeed Studio reSpeaker Clip more room for custom development and long-term adaptation than a workflow tied only to a manufacturer's app and cloud. It runs nRF Connect SDK v3.3.0 on Zephyr RTOS, with device-side controls for audio capture, connectivity, storage, display, and power management. Standalone recording and local storage allow audio capture without a continuous cloud connection; developers can route recordings to cloud or local AI services through supported interfaces. Firmware updates use Bluetooth OTA or USB serial recovery via MCUboot and mcumgr SMP. These options support customization and troubleshooting but do not guarantee privacy, uninterrupted cloud features, or protection from device failure. The excerpt presents integrated recorders as more convenient for users seeking a ready-to-use experience, while openness is especially useful for developers, privacy-conscious users, and teams with custom workflows.

### Source excerpt

An AI voice recorder can do much more than capture audio. It can transcribe conversations, The post Open Source AI Voice Recorder: Why Firmware Freedom Matters appeared first on Latest News from Seeed Studio.

## BLE noise on a specific ADC with an nRF54L15

DevFeed: [BLE noise on a specific ADC with an nRF54L15](<https://devfeed.tech/articles/ble-noise-on-a-specific-adc-with-an-nrf54l15-119467.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/05/ble-noise-on-a-specific-adc-with-an-nrf54l15/>)

Author: Anne Barela

Published: 2026-11-05T19:58:58Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Bluetooth LE](<https://devfeed.tech/topics/bluetooth-le.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [adc](<https://devfeed.tech/tags/adc.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [noise](<https://devfeed.tech/tags/noise.md>), [nrf54l15](<https://devfeed.tech/tags/nrf54l15.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [xiao](<https://devfeed.tech/tags/xiao.md>)

### AI overview

On the XIAO nRF54L15, AIN2 readings reportedly spike by up to 10 LSB at 14-bit resolution, 128x oversampling, and 2x gain when BLE is active; the noise disappears with BLE off and is worse during a connection than advertising. Forum members reproduced the issue on other boards, while Nordic development kits did not show it. Testing other analog inputs found the noise drops or disappears away from AIN2. Its trace runs beneath the main power inductor, which may contribute, but does not account for differences between boards. Lowering ADC gain also reduces the noise. A Seeed engineer and R&D team are investigating; the text does not report a confirmed cause or fix.

### Source excerpt

Sašo Domadenik has been tracking down an odd analog problem on the Seeed Studio forum: the ADC on the XIAO nRF54L15 picks up spikes whenever Bluetooth Low Energy is active. Sampling at 14-bit resolution with 128x oversampling, the readings jump by up to 10 LSB with the gain set to 2x. With BLE off, the [...]

## Seeed Studio launches 4.26" Mono and 7.3" Color e-Paper kits preloaded with OpenDisplay firmware

DevFeed: [Seeed Studio launches 4.26" Mono and 7.3" Color e-Paper kits preloaded with OpenDisplay firmware](<https://devfeed.tech/articles/seeed-studio-launches-4-26-mono-and-7-3-color-e-paper-kits-preloaded-with-opendisplay-firmware-119315.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/05/seeed-studio-launches-4-26-mono-and-7-3-color-e-paper-kits-preloaded-with-opendisplay-firmware/>)

Author: Anne Barela

Published: 2026-11-05T17:02:12Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [color](<https://devfeed.tech/topics/color.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>)

Tags: [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [board](<https://devfeed.tech/tags/board.md>), [browser](<https://devfeed.tech/tags/browser.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [calendar](<https://devfeed.tech/tags/calendar.md>), [color](<https://devfeed.tech/tags/color.md>), [displays](<https://devfeed.tech/tags/displays.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [kits](<https://devfeed.tech/tags/kits.md>), [mono](<https://devfeed.tech/tags/mono.md>), [nrf52840](<https://devfeed.tech/tags/nrf52840.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [opendisplay](<https://devfeed.tech/tags/opendisplay.md>), [operating-system](<https://devfeed.tech/tags/operating-system.md>), [panel](<https://devfeed.tech/tags/panel.md>), [python](<https://devfeed.tech/tags/python.md>), [refresh](<https://devfeed.tech/tags/refresh.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [software](<https://devfeed.tech/tags/software.md>)

### AI overview

Seeed Studio's two nRF52840 Bluetooth LE e-paper kits ship with OpenDisplay firmware: a 4.26-inch 800x480 monochrome/grayscale panel with partial refresh, and a 7.3-inch 800x480 Spectra 6 color panel. Both include a 2,000 mAh battery, XIAO nRF52840 Plus driver board, and control/reset buttons. OpenDisplay supports local image delivery without a cloud service: firmware can be flashed in a browser, and images sent over BLE or WiFi through the Toolbox in Chrome or Edge. Home Assistant can generate and push images for weather, temperature, energy use, and calendar events; a Python SDK is available for other integrations. Listed prices are $39.90 for mono and $75.90 for color.

### Source excerpt

Jean-Luc Aufranc writes at CNX Software that Seeed Studio has released two Bluetooth LE e-paper kits built around the Nordic nRF52840, both shipping with the open-source OpenDisplay firmware already installed. The OpenDisplay 4.26″ Mono Kit uses a 4.26-inch monochrome and grayscale panel at 800x480 with partial refresh. The 7.3″ Color Kit uses a 7.3-inch Spectra [...]

## Open Source Robotic Arm Recommendation for Developers, Researchers, Educators, and Startups in 2026

DevFeed: [Open Source Robotic Arm Recommendation for Developers, Researchers, Educators, and Startups in 2026](<https://devfeed.tech/articles/open-source-robotic-arm-recommendation-for-developers-researchers-educators-and-startups-in-2026-119438.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/11/05/best-open-source-robotic-arm/>)

Author: Liyan Gong

Published: 2026-11-05T09:56:45Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [lerobot](<https://devfeed.tech/topics/lerobot.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Learning](<https://devfeed.tech/topics/learning.md>)

Tags: [1-5](<https://devfeed.tech/tags/1-5.md>), [2](<https://devfeed.tech/tags/2.md>), [2026](<https://devfeed.tech/tags/2026.md>), [3](<https://devfeed.tech/tags/3.md>), [3d](<https://devfeed.tech/tags/3d.md>), [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [about](<https://devfeed.tech/tags/about.md>), [arm](<https://devfeed.tech/tags/arm.md>), [developers](<https://devfeed.tech/tags/developers.md>), [educators](<https://devfeed.tech/tags/educators.md>), [latest](<https://devfeed.tech/tags/latest.md>), [more](<https://devfeed.tech/tags/more.md>), [open](<https://devfeed.tech/tags/open.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [robotic](<https://devfeed.tech/tags/robotic.md>), [robotic-arm](<https://devfeed.tech/tags/robotic-arm.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [source](<https://devfeed.tech/tags/source.md>), [startups](<https://devfeed.tech/tags/startups.md>), [studio](<https://devfeed.tech/tags/studio.md>), [tech](<https://devfeed.tech/tags/tech.md>)

### AI overview

The excerpt presents the SO-ARM101 Pro as a pre-assembled, 6-DoF entry option for LeRobot teleoperation and imitation learning, with setup claimed to take about 30 minutes. The reBot B601-DM is the 24V mid-range option: 1.5 kg rated payload, ±0.2 mm repeatability, 767 mm reach, and an assembled-kit price of $1,499. The B601-RS costs $1,699 and uses 48V motors, with a 2.5 kg rated payload, ±0.1 mm repeatability, and 754 mm reach; it also adds MotorBridge tools such as graphical control and one-click calibration. Both reBot models are described as supporting ROS1/ROS2, LeRobot, Isaac Sim, Pinocchio, and a Python SDK, with hardware and software design materials available. The excerpt recommends choosing based on payload, budget, robustness, and preference for an assembled kit or building from scratch; it gives no comparable SO-ARM101 payload, reach, or price figures.

### Source excerpt

Choosing an open-source desktop robotic arm is about more than price and basic specs. The The post Open Source Robotic Arm Recommendation for Developers, Researchers, Educators, and Startups in 2026 appeared first on Latest News from Seeed Studio.

## Seeed Studio launches 4.26" Mono and 7.3" Color e-Paper kits preloaded with OpenDisplay firmware

DevFeed: [Seeed Studio launches 4.26" Mono and 7.3" Color e-Paper kits preloaded with OpenDisplay firmware](<https://devfeed.tech/articles/seeed-studio-launches-4-26-mono-and-7-3-color-e-paper-kits-preloaded-with-opendisplay-firmware-113664.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/03/seeed-studio-4-26-mono-and-7-3-color-e-paper-kits-opendisplay-firmware/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-03T09:00:45Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>), [color](<https://devfeed.tech/topics/color.md>)

Tags: [battery](<https://devfeed.tech/tags/battery.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-le](<https://devfeed.tech/tags/bluetooth-le.md>), [buttons](<https://devfeed.tech/tags/buttons.md>), [color](<https://devfeed.tech/tags/color.md>), [controller](<https://devfeed.tech/tags/controller.md>), [display](<https://devfeed.tech/tags/display.md>), [displays](<https://devfeed.tech/tags/displays.md>), [driver](<https://devfeed.tech/tags/driver.md>), [e-paper](<https://devfeed.tech/tags/e-paper.md>), [epaper](<https://devfeed.tech/tags/epaper.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [home-assistant](<https://devfeed.tech/tags/home-assistant.md>), [integration](<https://devfeed.tech/tags/integration.md>), [kits](<https://devfeed.tech/tags/kits.md>), [launches](<https://devfeed.tech/tags/launches.md>), [low-power](<https://devfeed.tech/tags/low-power.md>), [mcu](<https://devfeed.tech/tags/mcu.md>), [microcontroller](<https://devfeed.tech/tags/microcontroller.md>), [mono](<https://devfeed.tech/tags/mono.md>), [nfc](<https://devfeed.tech/tags/nfc.md>), [nordic-semi](<https://devfeed.tech/tags/nordic-semi.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [opendisplay](<https://devfeed.tech/tags/opendisplay.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [smart-home](<https://devfeed.tech/tags/smart-home.md>)

### AI overview

Seeed Studio's two OpenDisplay kits pair nRF52840 Bluetooth LE e-paper displays with preinstalled firmware for sending images locally, including optional Home Assistant updates. Both are 800x480 and use a 2,000 mAh battery. The 4.26-inch Mono supports partial refresh in black-and-white mode and an optional four-gray mode; the 7.3-inch Spectra 6 Color uses a fixed six-color palette and does not support partial refresh in color mode. Images can be sent through OpenDisplay Toolbox in Chrome or Edge, or through a compatible sender such as Home Assistant; Firefox is not supported. Home Assistant needs Bluetooth or Wi-Fi within range, with an ESPHome Bluetooth Proxy offered to extend Bluetooth coverage. The text estimates up to two years' battery life for the mono kit with 15-minute updates and one year for the color kit with two-hour updates.

### Source excerpt

Seeed Studio has launched two Nordic nRF52840-based Bluetooth LE e-paper kits preloaded with the OpenDisplay open-source firmware for e-paper displays and supporting Home Assistant integration. The OpenDisplay 4.26″ Mono features a 4.26-inch monochrome/grayscale display with 800x480 resolution and partial refresh support, while the OpenDisplay 7.3″ Color Kit is equipped with a 7.3-inch Spectra 6 color e-paper with the same resolution. Both are powered by a 2,000 mAh battery and feature a few buttons for control and reset. Seeed Studio OpenDisplay kits specifications: MCU - Nordic Semi nRF52840 CPU - Arm Cortex-M4F microcontroller @ up to 64 MHz Memory - 256 KB SRAM Storage - 1 MB flash Wireless - Bluetooth LE 5.0, NFC, 802.15.4 connectivity Display OpenDisplay 4.26″ Mono Kit 4.26-inch monochrome ePaper Black and white (default); optional 4-gray mode Partial Refresh - Supported in black-and-white mode only Resolution - 800 x 480 Controller - Seeed XIAO EN05 driver board [...] The post Seeed Studio launches 4.26" Mono and 7.3" Color e-Paper kits preloaded with OpenDisplay firmware appeared first on CNX Software - Embedded Systems News.

## STM32 programming for beginners

DevFeed: [STM32 programming for beginners](<https://devfeed.tech/articles/stm32-programming-for-beginners-112651.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/02/stm32-programming-for-beginners/>)

Author: Anne Barela

Published: 2026-11-02T20:51:53Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Programming](<https://devfeed.tech/topics/programming.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [adc](<https://devfeed.tech/tags/adc.md>), [bare-metal](<https://devfeed.tech/tags/bare-metal.md>), [beginners](<https://devfeed.tech/tags/beginners.md>), [clock](<https://devfeed.tech/tags/clock.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [programming](<https://devfeed.tech/tags/programming.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [software](<https://devfeed.tech/tags/software.md>), [stm32](<https://devfeed.tech/tags/stm32.md>), [uart](<https://devfeed.tech/tags/uart.md>)

### AI overview

The beginner's guide introduces STM32 bare-metal programming by writing directly to hardware registers instead of using vendor libraries such as HAL or CubeMX. It proceeds through GPIO, ADC voltage readings, clock setup, timers, and UART serial communication. The excerpt says this register-by-register approach requires more reference-manual reading, while making the role of each bit in the code explicit. The available text is an excerpt, so it does not establish the guide's full coverage or provide implementation details.

### Source excerpt

cgwaltney Christopher has posted a beginner's guide to STM32 programming on the Seeed Studio Forum. It covers bare-metal work, which means writing directly to the chip's hardware registers instead of calling a vendor library like HAL or CubeMX. The walkthrough starts with GPIO (the general purpose input and output pins), then moves to the ADC [...]

## Seeed in Action: Community & Sustainability Highlights -- October 2026

DevFeed: [Seeed in Action: Community & Sustainability Highlights -- October 2026](<https://devfeed.tech/articles/seeed-in-action-community-sustainability-highlights-october-2026-107199.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/30/seeed-in-action-community-sustainability-highlights-october-2026/>)

Author: amiie

Published: 2026-10-30T02:28:07Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Developer Events](<https://devfeed.tech/topics/developer-events.md>), [Learning](<https://devfeed.tech/topics/learning.md>), [tinyml](<https://devfeed.tech/topics/tinyml.md>), [human centric design](<https://devfeed.tech/topics/human-centric-design.md>), [Sustainable Computing](<https://devfeed.tech/topics/sustainable-computing.md>), [reliability-engineering](<https://devfeed.tech/topics/reliability-engineering.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [accessible](<https://devfeed.tech/tags/accessible.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-assisted](<https://devfeed.tech/tags/ai-assisted.md>), [ai-assisted-coding](<https://devfeed.tech/tags/ai-assisted-coding.md>), [ai-development](<https://devfeed.tech/tags/ai-development.md>), [art](<https://devfeed.tech/tags/art.md>), [audio](<https://devfeed.tech/tags/audio.md>), [build](<https://devfeed.tech/tags/build.md>), [camera](<https://devfeed.tech/tags/camera.md>), [community](<https://devfeed.tech/tags/community.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [educators](<https://devfeed.tech/tags/educators.md>), [environmental-monitoring](<https://devfeed.tech/tags/environmental-monitoring.md>), [feature](<https://devfeed.tech/tags/feature.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [highlights](<https://devfeed.tech/tags/highlights.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lorawan](<https://devfeed.tech/tags/lorawan.md>), [news](<https://devfeed.tech/tags/news.md>), [october](<https://devfeed.tech/tags/october.md>), [october-2026](<https://devfeed.tech/tags/october-2026.md>), [open](<https://devfeed.tech/tags/open.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [recamera-poe](<https://devfeed.tech/tags/recamera-poe.md>), [recomputer](<https://devfeed.tech/tags/recomputer.md>), [sdg-award](<https://devfeed.tech/tags/sdg-award.md>), [sdg-cases](<https://devfeed.tech/tags/sdg-cases.md>), [sdg-contest](<https://devfeed.tech/tags/sdg-contest.md>), [sdg-workshop](<https://devfeed.tech/tags/sdg-workshop.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [seeed-studio-xiao](<https://devfeed.tech/tags/seeed-studio-xiao.md>), [sustainability](<https://devfeed.tech/tags/sustainability.md>)

### AI overview

Seeed Studio's October 2026 partnerships supplied hardware, manufacturing resources, sponsorship, and technical support for community projects using open hardware. Activities included GOSH workshops on open science tools and hackTurin prototype mentoring; the GIG Fund offers eligible innovators grants as Seeed product and Fusion coupons. Research efforts remain in development: the Interspecies Open Datalogger is undergoing field validation in Panama, RiKhaNET is preparing a 25-camera wildlife-monitoring system in Bhutan, and a TinyML project is investigating malaria test-strip image classification on a microcontroller. Other initiatives supported STEAM workshops for about 70 Seattle students, explored repairing electronic artworks with reSpeaker and XIAO hardware, and contributed voice and computing hardware to an offline floating data-centre research prototype. The report describes intended applications and ongoing work, not demonstrated outcomes.

### Source excerpt

This October, Seeed Studio supported researchers, educators, artists, and community innovators using open hardware to The post Seeed in Action: Community & Sustainability Highlights -- October 2026 appeared first on Latest News from Seeed Studio.

## From Experience to Evidence: How Growers in Ningxia Use SenseCAP Sensors to Help Prevent Cherry Tomato Cracking

DevFeed: [From Experience to Evidence: How Growers in Ningxia Use SenseCAP Sensors to Help Prevent Cherry Tomato Cracking](<https://devfeed.tech/articles/from-experience-to-evidence-how-growers-in-ningxia-use-sensecap-sensors-to-help-prevent-cherry-tomato-cracking-104474.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/27/from-experience-to-evidence-how-growers-in-ningxia-use-sensecap-sensors-to-help-prevent-cherry-tomato-cracking/>)

Author: violet

Published: 2026-10-27T22:49:33Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [IoT predictive analytics](<https://devfeed.tech/topics/iot-predictive-analytics.md>), [Physical AI](<https://devfeed.tech/topics/physical-ai.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [2](<https://devfeed.tech/tags/2.md>), [2026](<https://devfeed.tech/tags/2026.md>), [3](<https://devfeed.tech/tags/3.md>), [4g](<https://devfeed.tech/tags/4g.md>), [about](<https://devfeed.tech/tags/about.md>), [ai](<https://devfeed.tech/tags/ai.md>), [climate](<https://devfeed.tech/tags/climate.md>), [cracking](<https://devfeed.tech/tags/cracking.md>), [daily](<https://devfeed.tech/tags/daily.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [experience](<https://devfeed.tech/tags/experience.md>), [feature](<https://devfeed.tech/tags/feature.md>), [first](<https://devfeed.tech/tags/first.md>), [greenhouse](<https://devfeed.tech/tags/greenhouse.md>), [help](<https://devfeed.tech/tags/help.md>), [iiot](<https://devfeed.tech/tags/iiot.md>), [know-how](<https://devfeed.tech/tags/know-how.md>), [microclimate](<https://devfeed.tech/tags/microclimate.md>), [news](<https://devfeed.tech/tags/news.md>), [practical](<https://devfeed.tech/tags/practical.md>), [precision-farming](<https://devfeed.tech/tags/precision-farming.md>), [reports](<https://devfeed.tech/tags/reports.md>), [resilient-communities](<https://devfeed.tech/tags/resilient-communities.md>), [risks](<https://devfeed.tech/tags/risks.md>), [sdg-cases](<https://devfeed.tech/tags/sdg-cases.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensecap](<https://devfeed.tech/tags/sensecap.md>), [sensor](<https://devfeed.tech/tags/sensor.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [smart-agriculture](<https://devfeed.tech/tags/smart-agriculture.md>), [studio](<https://devfeed.tech/tags/studio.md>), [teams](<https://devfeed.tech/tags/teams.md>), [tech](<https://devfeed.tech/tags/tech.md>), [tomato-growing](<https://devfeed.tech/tags/tomato-growing.md>), [weather-sensor](<https://devfeed.tech/tags/weather-sensor.md>), [weather-station](<https://devfeed.tech/tags/weather-station.md>)

### AI overview

Across two growing areas in Ningxia, 18 SenseCAP devices collected 25,152 environmental records over 40 days. OpenClaw analyzed readings from greenhouses and outdoor weather, including air and soil conditions, light, rainfall, and wind, then sent daily risk reports to the team's WeChat group. The reports helped growers compare cracking rates, flag prolonged high humidity before picking, and reassess irrigation and ventilation using soil readings alongside atmospheric conditions. The team adjusted picking and sorting plans and revised irrigation and ventilation strategies; recommendations included opening vents before 10 a.m. and checking fruit shoulders. The excerpt reports a 0.3% cracking rate in a greenhouse with upper vents versus 6.3% in one without, and links extended high humidity to increased cracking the following day. These are findings from one 40-day project; the account does not establish broader causal effects.

### Source excerpt

From a real-world deployment in Ningxia, see how 18 SenseCAP sensors and daily AI reports helped growing teams monitor greenhouse conditions, identify cherry tomato cracking risks earlier, and turn environmental observations into practical growing decisions. The post From Experience to Evidence: How Growers in Ningxia Use SenseCAP Sensors to Help Prevent Cherry Tomato Cracking appeared first on Latest News from Seeed Studio.

## Seeed Studio x Kids Engine: Bringing Hands-on Hardware Learning to Underserved Communities

DevFeed: [Seeed Studio x Kids Engine: Bringing Hands-on Hardware Learning to Underserved Communities](<https://devfeed.tech/articles/seeed-studio-kids-engine-bringing-hands-on-hardware-learning-to-underserved-communities-101189.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/27/seeed-studio-x-kids-engine-bringing-hands-on-hardware-learning-to-underserved-communities/>)

Author: amiie

Published: 2026-10-27T03:31:47Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [Learning](<https://devfeed.tech/topics/learning.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [accessible](<https://devfeed.tech/tags/accessible.md>), [build](<https://devfeed.tech/tags/build.md>), [children](<https://devfeed.tech/tags/children.md>), [code](<https://devfeed.tech/tags/code.md>), [coding](<https://devfeed.tech/tags/coding.md>), [communities](<https://devfeed.tech/tags/communities.md>), [community](<https://devfeed.tech/tags/community.md>), [components](<https://devfeed.tech/tags/components.md>), [design](<https://devfeed.tech/tags/design.md>), [donation](<https://devfeed.tech/tags/donation.md>), [education](<https://devfeed.tech/tags/education.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [empathy](<https://devfeed.tech/tags/empathy.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hardware-learning](<https://devfeed.tech/tags/hardware-learning.md>), [kids](<https://devfeed.tech/tags/kids.md>), [learning](<https://devfeed.tech/tags/learning.md>), [news](<https://devfeed.tech/tags/news.md>), [nonprofit](<https://devfeed.tech/tags/nonprofit.md>), [sdg-cases](<https://devfeed.tech/tags/sdg-cases.md>), [sdg-workshop](<https://devfeed.tech/tags/sdg-workshop.md>), [seattle](<https://devfeed.tech/tags/seattle.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [steam](<https://devfeed.tech/tags/steam.md>), [tech4good](<https://devfeed.tech/tags/tech4good.md>), [workshops](<https://devfeed.tech/tags/workshops.md>)

### AI overview

In three Seattle workshops, around 70 students used visual programming, micro:bit boards, and Grove sensors to prototype responses to everyday community needs. Kids Engine's process starts with identifying who a device should help, then moves through brainstorming, building, testing, and refining; example challenges included garden care, classroom accessibility, and resource conservation. Seeed Studio contributed Grove Shields for micro:bit in kind. Kids Engine's wider program partners with the Seattle Housing Authority and Refugee Women's Alliance to reach children from lower-income, refugee, and immigrant families.

### Source excerpt

Seeed Studio supported a series of Seattle workshops run by Kids Engine, a nonprofit focused The post Seeed Studio x Kids Engine: Bringing Hands-on Hardware Learning to Underserved Communities appeared first on Latest News from Seeed Studio.

## Seeed Studio at GOSH 2026 in Nepal: Making Open Science More Accessible:

DevFeed: [Seeed Studio at GOSH 2026 in Nepal: Making Open Science More Accessible:](<https://devfeed.tech/articles/seeed-studio-at-gosh-2026-in-nepal-making-open-science-more-accessible-100569.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/26/seeed-studio-at-gosh-2026-in-nepal-making-open-science-more-accessible/>)

Author: amiie

Published: 2026-10-26T08:53:14Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [meetings](<https://devfeed.tech/topics/meetings.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Learning](<https://devfeed.tech/topics/learning.md>), [software-development](<https://devfeed.tech/topics/software-development.md>), [Artificial Intelligence](<https://devfeed.tech/topics/ai.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [accessible](<https://devfeed.tech/tags/accessible.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-assisted](<https://devfeed.tech/tags/ai-assisted.md>), [ai-assisted-coding](<https://devfeed.tech/tags/ai-assisted-coding.md>), [build](<https://devfeed.tech/tags/build.md>), [code](<https://devfeed.tech/tags/code.md>), [community](<https://devfeed.tech/tags/community.md>), [educators](<https://devfeed.tech/tags/educators.md>), [events](<https://devfeed.tech/tags/events.md>), [events-2026](<https://devfeed.tech/tags/events-2026.md>), [global](<https://devfeed.tech/tags/global.md>), [gosh](<https://devfeed.tech/tags/gosh.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [learning](<https://devfeed.tech/tags/learning.md>), [makers](<https://devfeed.tech/tags/makers.md>), [making](<https://devfeed.tech/tags/making.md>), [nepal](<https://devfeed.tech/tags/nepal.md>), [news](<https://devfeed.tech/tags/news.md>), [open](<https://devfeed.tech/tags/open.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [science](<https://devfeed.tech/tags/science.md>), [sdg-webinar](<https://devfeed.tech/tags/sdg-webinar.md>), [sdg-workshop](<https://devfeed.tech/tags/sdg-workshop.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>)

### AI overview

At GOSH 2026 in Lalitpur, participants explored how open hardware can make scientific tools easier to build, adapt, repair, and share. Sessions covered topics including water testing, soil monitoring, solar cells, disaster shelters, and accessible hardware. A Wio Terminal workshop used AI-assisted coding to help participants experiment with software and physical devices, while a paper-hat exercise demonstrated a reproducible production workflow: prototype, document, gain approval, and verify quality. Seeed also presented its Open Datalogger, an open-hardware tool for interspecies research and ecological monitoring that was being field-tested with partners. The excerpt describes sponsorship and hands-on learning, but gives no measured outcomes for the event or tool.

### Source excerpt

Supporting a global community of makers, researchers, and educators through open hardware, hands-on learning, and The post Seeed Studio at GOSH 2026 in Nepal: Making Open Science More Accessible: appeared first on Latest News from Seeed Studio.

## Important Update: Upgraded Memory and Storage for Seeed Studio's Raspberry Pi-Based Products

DevFeed: [Important Update: Upgraded Memory and Storage for Seeed Studio's Raspberry Pi-Based Products](<https://devfeed.tech/articles/important-update-upgraded-memory-and-storage-for-seeed-studio-s-raspberry-pi-based-products-97450.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/23/upgraded-memory-and-storage-for-seeed-raspberry-pi-based-products/>)

Author: Elena Tang

Published: 2026-10-23T08:56:57Z

Content type: release

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Raspberry Pi](<https://devfeed.tech/topics/raspberry-pi.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ai-inference](<https://devfeed.tech/tags/ai-inference.md>), [ai-workloads](<https://devfeed.tech/tags/ai-workloads.md>), [application](<https://devfeed.tech/tags/application.md>), [applications](<https://devfeed.tech/tags/applications.md>), [automation](<https://devfeed.tech/tags/automation.md>), [build](<https://devfeed.tech/tags/build.md>), [capacity](<https://devfeed.tech/tags/capacity.md>), [changes](<https://devfeed.tech/tags/changes.md>), [cm5](<https://devfeed.tech/tags/cm5.md>), [compute-module](<https://devfeed.tech/tags/compute-module.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [feature](<https://devfeed.tech/tags/feature.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [important](<https://devfeed.tech/tags/important.md>), [memory](<https://devfeed.tech/tags/memory.md>), [news](<https://devfeed.tech/tags/news.md>), [pi](<https://devfeed.tech/tags/pi.md>), [raspberry](<https://devfeed.tech/tags/raspberry.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [storage](<https://devfeed.tech/tags/storage.md>), [tech](<https://devfeed.tech/tags/tech.md>), [update](<https://devfeed.tech/tags/update.md>), [updating](<https://devfeed.tech/tags/updating.md>)

### AI overview

Seeed Studio says supply changes prompted hardware updates to selected CM4- and CM5-based products, with listed configurations reaching 16GB RAM and 64GB eMMC. CM5-based reComputer Industrial R models offer 8GB or 16GB RAM with 64GB eMMC; the AI Industrial R2136-12 and R2146-12 are described as having 8GB and 16GB RAM, respectively, with 64GB eMMC. Selected CM4 reComputer R models have 64GB eMMC, with RAM varying by model. The listed reTerminal and reTerminal DM configurations pair 64GB eMMC with 4GB or 8GB RAM; DM options include camera and PoE connectivity. reRouter CM4 models include expanded eMMC options, including 64GB. Seeed Fusion is offered for customized memory, storage, I/O, or connectivity.

### Source excerpt

Due to changes in the official supply, Seeed Studio is updating the hardware configurations of The post Important Update: Upgraded Memory and Storage for Seeed Studio's Raspberry Pi-Based Products appeared first on Latest News from Seeed Studio.

## Why Choose Fanless Cooling for Industrial Edge Deployment?

DevFeed: [Why Choose Fanless Cooling for Industrial Edge Deployment?](<https://devfeed.tech/articles/why-choose-fanless-cooling-for-industrial-edge-deployment-92712.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/21/why-choose-fanless-cooling-for-industrial-edge-deployment/>)

Author: Elena Tang

Published: 2026-10-21T10:45:07Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ai-deployment](<https://devfeed.tech/tags/ai-deployment.md>), [build](<https://devfeed.tech/tags/build.md>), [cooling](<https://devfeed.tech/tags/cooling.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [deployment](<https://devfeed.tech/tags/deployment.md>), [edge](<https://devfeed.tech/tags/edge.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [edge-ai-deployment](<https://devfeed.tech/tags/edge-ai-deployment.md>), [fanless-cooling](<https://devfeed.tech/tags/fanless-cooling.md>), [feature](<https://devfeed.tech/tags/feature.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [industrial-application](<https://devfeed.tech/tags/industrial-application.md>), [iot](<https://devfeed.tech/tags/iot.md>), [know-how](<https://devfeed.tech/tags/know-how.md>), [news](<https://devfeed.tech/tags/news.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [pcb](<https://devfeed.tech/tags/pcb.md>), [rk3576](<https://devfeed.tech/tags/rk3576.md>), [rk3588](<https://devfeed.tech/tags/rk3588.md>), [rockchip](<https://devfeed.tech/tags/rockchip.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [tech](<https://devfeed.tech/tags/tech.md>)

### AI overview

The article presents fanless passive cooling as the default for industrial edge devices expected to run unattended in dusty, wet, salty, vibrating, or wide-temperature environments: sealed enclosures avoid fan-related failure paths and routine filter or fan maintenance. It says forced-air cooling generally removes more heat, so passive designs trade peak heat capacity for reliability and protection; sustained high-power workloads in very compact enclosures can require larger devices or reduced SoC performance. Seeed's reComputer Industrial RK3576 is cited as an example: the text reports full-load operation without throttling through 55°C, with brief occasional throttling limited to background little cores at 60°C. It recommends fanless devices for harsh or unattended sites and lighter inference workloads, while describing the actively cooled reComputer RK3576 as aimed at general commercial use.

### Source excerpt

In edge AI deployment, the choice of cooling solution is often simplified into a single The post Why Choose Fanless Cooling for Industrial Edge Deployment? appeared first on Latest News from Seeed Studio.

## How Wind and Rain Monitoring Supports Smart Urban Drainage?

DevFeed: [How Wind and Rain Monitoring Supports Smart Urban Drainage?](<https://devfeed.tech/articles/how-wind-and-rain-monitoring-supports-smart-urban-drainage-92571.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/21/urban-wind-rain-monitoring/>)

Author: Geralt Zhai

Published: 2026-10-21T09:28:18Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [Monitoring](<https://devfeed.tech/topics/monitoring.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [2022](<https://devfeed.tech/tags/2022.md>), [about](<https://devfeed.tech/tags/about.md>), [air](<https://devfeed.tech/tags/air.md>), [air-quality](<https://devfeed.tech/tags/air-quality.md>), [airline](<https://devfeed.tech/tags/airline.md>), [airport](<https://devfeed.tech/tags/airport.md>), [also](<https://devfeed.tech/tags/also.md>), [analysis](<https://devfeed.tech/tags/analysis.md>), [away](<https://devfeed.tech/tags/away.md>), [based](<https://devfeed.tech/tags/based.md>), [benefit](<https://devfeed.tech/tags/benefit.md>), [first](<https://devfeed.tech/tags/first.md>), [green](<https://devfeed.tech/tags/green.md>), [iot](<https://devfeed.tech/tags/iot.md>), [monitoring](<https://devfeed.tech/tags/monitoring.md>), [news](<https://devfeed.tech/tags/news.md>), [rain](<https://devfeed.tech/tags/rain.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensecap](<https://devfeed.tech/tags/sensecap.md>), [smart](<https://devfeed.tech/tags/smart.md>), [spaces](<https://devfeed.tech/tags/spaces.md>), [studio](<https://devfeed.tech/tags/studio.md>), [thermal](<https://devfeed.tech/tags/thermal.md>)

### AI overview

Local rainfall intensity and wind speed and direction measurements can help city teams assess changing drainage and road risks. Wind may shift where rain falls, while road elevation and drainage capacity largely determine where water collects; coastal winds can also raise sea levels and slow drainage. The text recommends combining timely on-site weather readings with water-level and drainage-system data. SenseCAP S700-A and S700-C use non-contact radar to estimate rain intensity, avoiding collection funnels and moving rain-gauge parts, and ultrasound to measure wind speed and direction without rotating components. These designs reduce risks of blockage, wear and maintenance; ultrasonic sensing can detect lighter winds and respond quickly to changes. Seeed Studio says each wind sensor is calibrated in its wind tunnel before delivery. The overview draws on the supplied text, which includes excerpts and does not establish coverage beyond them.

### Source excerpt

Rain nourishes urban green spaces, while gentle winds improve ventilation and thermal comfort. Understanding these The post How Wind and Rain Monitoring Supports Smart Urban Drainage? appeared first on Latest News from Seeed Studio.

## The Kitchen That Reads Your Hands: Gesture AI Meets ePaper in a Touch-Free Restaurant System

DevFeed: [The Kitchen That Reads Your Hands: Gesture AI Meets ePaper in a Touch-Free Restaurant System](<https://devfeed.tech/articles/the-kitchen-that-reads-your-hands-gesture-ai-meets-epaper-in-a-touch-free-restaurant-system-91861.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/21/the-kitchen-that-reads-your-hands-gesture-ai-meets-epaper-in-a-touch-free-restaurant-system/>)

Author: zitong.jiang@seeed.cc

Published: 2026-10-21T07:45:54Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [ESP32-C3](<https://devfeed.tech/topics/esp32-c3.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>)

Tags: [2026](<https://devfeed.tech/tags/2026.md>), [3d](<https://devfeed.tech/tags/3d.md>), [3d-printed](<https://devfeed.tech/tags/3d-printed.md>), [accessible](<https://devfeed.tech/tags/accessible.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-accelerator](<https://devfeed.tech/tags/ai-accelerator.md>), [ai-applications](<https://devfeed.tech/tags/ai-applications.md>), [ai-inference](<https://devfeed.tech/tags/ai-inference.md>), [ai-model](<https://devfeed.tech/tags/ai-model.md>), [air](<https://devfeed.tech/tags/air.md>), [blog](<https://devfeed.tech/tags/blog.md>), [draft](<https://devfeed.tech/tags/draft.md>), [epaper](<https://devfeed.tech/tags/epaper.md>), [kitchen](<https://devfeed.tech/tags/kitchen.md>), [news](<https://devfeed.tech/tags/news.md>), [october](<https://devfeed.tech/tags/october.md>), [october-2026](<https://devfeed.tech/tags/october-2026.md>), [project](<https://devfeed.tech/tags/project.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [studio](<https://devfeed.tech/tags/studio.md>), [system](<https://devfeed.tech/tags/system.md>)

### AI overview

PaperDine is a working restaurant prototype that pairs gesture-controlled kitchen order displays with customer ePaper menus and QR ordering. ChefAssist runs gesture recognition locally on a XIAO Vision AI Camera; a recognized rock, paper, or scissors gesture updates an order in Firebase, and customer displays refresh in roughly two seconds. The system also uses partial ePaper updates to avoid flashing the whole screen when an order is removed. TableSpot's TRMNL display receives wireless content updates through SenseCraft Seeedash, while customers place orders through a web page; Firebase sorts them by preparation speed into a prioritized kitchen queue. The article describes the setup as a prototype with a small gesture command set and relatively static displays. More gestures and inventory or equipment-status uses are possibilities, not implemented features.

### Source excerpt

By Ameya Angadi's PaperDine Project | Seeed Studio Blog Draft | October 2026 In a The post The Kitchen That Reads Your Hands: Gesture AI Meets ePaper in a Touch-Free Restaurant System appeared first on Latest News from Seeed Studio.

## Yocto on Jetson: Build and Flash on Seeed Carrier Boards

DevFeed: [Yocto on Jetson: Build and Flash on Seeed Carrier Boards](<https://devfeed.tech/articles/yocto-on-jetson-build-and-flash-on-seeed-carrier-boards-91862.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/21/yocto-on-jetson-build-and-flash-on-seeed-carrier-boards/>)

Author: Frank

Published: 2026-10-21T07:17:26Z

Content type: tutorial

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Jetson Orin](<https://devfeed.tech/topics/jetson-orin.md>), [Build tool](<https://devfeed.tech/topics/build-tool.md>), [Test automation](<https://devfeed.tech/topics/test-automation.md>), [software bill of materials](<https://devfeed.tech/topics/software-bill-of-materials.md>)

Tags: [acceptance](<https://devfeed.tech/tags/acceptance.md>), [application](<https://devfeed.tech/tags/application.md>), [archive](<https://devfeed.tech/tags/archive.md>), [board](<https://devfeed.tech/tags/board.md>), [boot](<https://devfeed.tech/tags/boot.md>), [bsp](<https://devfeed.tech/tags/bsp.md>), [build](<https://devfeed.tech/tags/build.md>), [build-tools](<https://devfeed.tech/tags/build-tools.md>), [building](<https://devfeed.tech/tags/building.md>), [but](<https://devfeed.tech/tags/but.md>), [camera](<https://devfeed.tech/tags/camera.md>), [carrier](<https://devfeed.tech/tags/carrier.md>), [carrier-board](<https://devfeed.tech/tags/carrier-board.md>), [clone](<https://devfeed.tech/tags/clone.md>), [command](<https://devfeed.tech/tags/command.md>), [embedded-linux](<https://devfeed.tech/tags/embedded-linux.md>), [flash](<https://devfeed.tech/tags/flash.md>), [image](<https://devfeed.tech/tags/image.md>), [jetpack](<https://devfeed.tech/tags/jetpack.md>), [jetson](<https://devfeed.tech/tags/jetson.md>), [news](<https://devfeed.tech/tags/news.md>), [nvidia-jetson](<https://devfeed.tech/tags/nvidia-jetson.md>), [package](<https://devfeed.tech/tags/package.md>), [recomputer](<https://devfeed.tech/tags/recomputer.md>), [tech](<https://devfeed.tech/tags/tech.md>), [yocto](<https://devfeed.tech/tags/yocto.md>)

### AI overview

For reproducible Yocto builds on Jetson, keep the carrier, module SKU, source revision, image recipe, flash artifact, and target results tied together. The example uses Seeed's reComputer Super J401 with OE4T wrynose and meta-tegra for Jetson Linux R39.2.0 / JetPack 7.2; verify the current Wiki for other releases. The development image includes target-side nvcc and build tools, while the x86_64 cross-development SDK is a separate output. The workflow records inputs, builds and checksums a tegraflash archive, prepares flashing with the same recipe, then tests the interfaces the application uses. The support matrix's physical validation is limited, so treat untested interfaces as project work. The article reports no build, flash, or hardware test results.

### Source excerpt

A completed image build leaves several questions open: does the flash package match the installed The post Yocto on Jetson: Build and Flash on Seeed Carrier Boards appeared first on Latest News from Seeed Studio.

## Uniting for Climate Action: Seeed Studio Joins HMEI to Drive Accessible, Intelligent Environmental Monitoring

DevFeed: [Uniting for Climate Action: Seeed Studio Joins HMEI to Drive Accessible, Intelligent Environmental Monitoring](<https://devfeed.tech/articles/uniting-for-climate-action-seeed-studio-joins-hmei-to-drive-accessible-intelligent-environmental-monitoring-85924.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/13/uniting-for-climate-action-seeed-studio-joins-hmei-to-drive-accessible-intelligent-environmental-monitoring/>)

Author: Asti

Published: 2026-10-13T08:52:30Z

Content type: news

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Sustainable Computing](<https://devfeed.tech/topics/sustainable-computing.md>), [AIOps for Kubernetes](<https://devfeed.tech/topics/aiops-for-kubernetes.md>), [NVIDIA DRIVE](<https://devfeed.tech/topics/nvidia-drive.md>)

Tags: [architectures](<https://devfeed.tech/tags/architectures.md>), [climate](<https://devfeed.tech/tags/climate.md>), [hmei](<https://devfeed.tech/tags/hmei.md>), [hydrometeorological](<https://devfeed.tech/tags/hydrometeorological.md>), [hydrometeorological-weather-station](<https://devfeed.tech/tags/hydrometeorological-weather-station.md>), [iot](<https://devfeed.tech/tags/iot.md>), [news](<https://devfeed.tech/tags/news.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensecap](<https://devfeed.tech/tags/sensecap.md>), [weather-station](<https://devfeed.tech/tags/weather-station.md>)

### AI overview

Seeed Studio announces that it has joined HMEI, an association for the hydrometeorological and environmental industry. The post describes Seeed's sensing, connected data acquisition and edge computing portfolio, and says the company aims to contribute technical and deployment experience to shared work on environmental monitoring.

### Source excerpt

Seeed Studio Joins the Global Hydrometeorological Community We are thrilled to share a major milestone The post Uniting for Climate Action: Seeed Studio Joins HMEI to Drive Accessible, Intelligent Environmental Monitoring appeared first on Latest News from Seeed Studio.

## Monthly Wrap-Up for September 2026: Open Hardware, Physical AI & Community Innovation in Action

DevFeed: [Monthly Wrap-Up for September 2026: Open Hardware, Physical AI & Community Innovation in Action](<https://devfeed.tech/articles/monthly-wrap-up-for-september-2026-open-hardware-physical-ai-community-innovation-in-action-84011.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/10/09/monthly-wrap-up-for-september-2026-open-hardware-physical-ai-community-innovation-in-action/>)

Author: amiie

Published: 2026-10-09T09:03:15Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Physical AI](<https://devfeed.tech/topics/physical-ai.md>), [creative technology](<https://devfeed.tech/topics/creative-technology.md>), [Hacktoberfest](<https://devfeed.tech/topics/hacktoberfest.md>), [Home Assistant](<https://devfeed.tech/topics/home-assistant.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [community](<https://devfeed.tech/tags/community.md>), [feature](<https://devfeed.tech/tags/feature.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [lorawan](<https://devfeed.tech/tags/lorawan.md>), [news](<https://devfeed.tech/tags/news.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [pcb-manufacture-and-assembly](<https://devfeed.tech/tags/pcb-manufacture-and-assembly.md>), [physical-ai](<https://devfeed.tech/tags/physical-ai.md>), [sensecap](<https://devfeed.tech/tags/sensecap.md>)

### AI overview

Seeed Studio's September 2026 roundup covers community events, learning resources, hardware and software projects, product updates, and maker initiatives. Highlights include robotics and TinyML courses, Matter and Zigbee support for the XIAO MG24, experimental Debian 13 for reCamera Pro, and cloud-based robotics model training.

### Source excerpt

Hey community, Welcome to our September 2026 Monthly Wrap-up! September brought another month of hands-on building The post Monthly Wrap-Up for September 2026: Open Hardware, Physical AI & Community Innovation in Action appeared first on Latest News from Seeed Studio.

## PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO

DevFeed: [PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO](<https://devfeed.tech/articles/pmsgtm-build-your-own-modular-smart-glasses-with-seeed-studio-xiao-59841.md>)

Original publisher: [Read original article](<https://www.seeedstudio.com/blog/2026/09/25/pmsg-modular-smart-glasses-xiao/>)

Author: Kezang Loday

Published: 2026-09-25T09:59:38Z

Content type: article

Language: en

Sources: [Seeed Studio](<https://devfeed.tech/sources/latest-news-from-seeed-studio.md>)

Topics: [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Hardware](<https://devfeed.tech/topics/hardware.md>), [ESP32](<https://devfeed.tech/topics/esp32.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>), [USB](<https://devfeed.tech/topics/usb.md>), [mesh networking](<https://devfeed.tech/topics/mesh-networking.md>)

Tags: [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [board](<https://devfeed.tech/tags/board.md>), [build](<https://devfeed.tech/tags/build.md>), [camera](<https://devfeed.tech/tags/camera.md>), [cameras](<https://devfeed.tech/tags/cameras.md>), [charging](<https://devfeed.tech/tags/charging.md>), [deploy](<https://devfeed.tech/tags/deploy.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [feature](<https://devfeed.tech/tags/feature.md>), [glasses](<https://devfeed.tech/tags/glasses.md>), [grove](<https://devfeed.tech/tags/grove.md>), [lora](<https://devfeed.tech/tags/lora.md>), [mesh-networking](<https://devfeed.tech/tags/mesh-networking.md>), [modular](<https://devfeed.tech/tags/modular.md>), [open-hardware](<https://devfeed.tech/tags/open-hardware.md>), [pmsg](<https://devfeed.tech/tags/pmsg.md>), [privacy](<https://devfeed.tech/tags/privacy.md>), [project-spotlight](<https://devfeed.tech/tags/project-spotlight.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [seeed-studio-xiao](<https://devfeed.tech/tags/seeed-studio-xiao.md>), [smart-glasses](<https://devfeed.tech/tags/smart-glasses.md>), [wearables](<https://devfeed.tech/tags/wearables.md>), [xiao](<https://devfeed.tech/tags/xiao.md>), [xiao-esp32-c6](<https://devfeed.tech/tags/xiao-esp32-c6.md>), [xiao-esp32-s3](<https://devfeed.tech/tags/xiao-esp32-s3.md>), [xiao-nrf52840-sense](<https://devfeed.tech/tags/xiao-nrf52840-sense.md>)

### AI overview

PMSG is an open, modular smart-glasses platform built around interchangeable Seeed Studio XIAO boards. The design includes a custom PCBA, Grove connectors, sensors, LEDs, haptic feedback, battery and USB-C charging, with the base version omitting a camera for privacy.

### Source excerpt

Commercial smart glasses tend to share three traits: they're expensive, they're closed, and they're full The post PMSG™: Build Your Own Modular Smart Glasses with Seeed Studio XIAO appeared first on Latest News from Seeed Studio.

[Next page](<https://devfeed.tech/topics/seeed-studio.md?cursor=WyIyMDI2LTA5LTI1VDA5OjU5OjM4KzAwOjAwIiwgImMyZWExYTc1LWUyYWEtNDU2ZC05YjI3LTkzMjdmYmEyZmQyNiJd>)