# USB

USB (Universal Serial Bus) is a connectivity technology for computers and peripherals, with specifications including USB4, USB 3.2, and USB 2.0.

This is one page of public article previews, not the complete archive. Follow Next page to continue. Summaries are not the original full articles.

## Old FireWire Audio Interface Gets USB C Upgrade

DevFeed: [Old FireWire Audio Interface Gets USB C Upgrade](<https://devfeed.tech/articles/old-firewire-audio-interface-gets-usb-c-upgrade-146710.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/20/old-firewire-audio-interface-gets-usb-c-upgrade/>)

Author: Zoe Skyforest

Published: 2026-11-20T21:00:28Z

Content type: news

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [upgrade](<https://devfeed.tech/topics/upgrade.md>), [interface](<https://devfeed.tech/topics/interface.md>)

Tags: [audio](<https://devfeed.tech/tags/audio.md>), [firewire](<https://devfeed.tech/tags/firewire.md>), [fuegocable](<https://devfeed.tech/tags/fuegocable.md>), [interface](<https://devfeed.tech/tags/interface.md>), [misc-hacks](<https://devfeed.tech/tags/misc-hacks.md>), [project](<https://devfeed.tech/tags/project.md>), [upgrade](<https://devfeed.tech/tags/upgrade.md>), [usb](<https://devfeed.tech/tags/usb.md>), [usb-audio](<https://devfeed.tech/tags/usb-audio.md>), [usb-c](<https://devfeed.tech/tags/usb-c.md>)

### AI overview

A PreSonus Firestudio Project was converted from FireWire to USB-C by removing its original FireWire controller, adding an XMOS-based USB audio board, and reusing the interface's existing audio circuitry. The audio signals were wired between boards with equal-length conductors and interleaved grounds to limit interference and jitter. With suitable drivers, the modified unit provides access to all eight inputs and outputs over USB-C. The project's stated goal is to adapt the approach to other older FireWire interfaces, with the PreSonus FP10 and Focusrite Saffire named as next targets.

### Source excerpt

[bonsembiante] had a PreSonus Firestudio Project on hand. It's a very capable audio interface with 8 inputs and 8 outputs, along with MIDI to boot. However, it's got one problem--it ...read more

## Waveshare ESP32-S31-Touch-LCD-4.3C - An ESP32-S31 4.3-inch display devkit with optional DIN rail case

DevFeed: [Waveshare ESP32-S31-Touch-LCD-4.3C - An ESP32-S31 4.3-inch display devkit with optional DIN rail case](<https://devfeed.tech/articles/waveshare-esp32-s31-touch-lcd-4-3c-an-esp32-s31-4-3-inch-display-devkit-with-optional-din-rail-case-143845.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/19/waveshare-esp32-s31-touch-lcd-4-3c-an-esp32-s31-4-3-inch-display-devkit-with-optional-din-rail-case/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-19T14:19:12Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [802.15.4](<https://devfeed.tech/topics/802-15-4.md>), [USB](<https://devfeed.tech/topics/usb.md>), [waveshare](<https://devfeed.tech/topics/waveshare.md>)

Tags: [320-mhz](<https://devfeed.tech/tags/320-mhz.md>), [802-15-4](<https://devfeed.tech/tags/802-15-4.md>), [audio](<https://devfeed.tech/tags/audio.md>), [battery](<https://devfeed.tech/tags/battery.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-5-4](<https://devfeed.tech/tags/bluetooth-5-4.md>), [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [can-bus](<https://devfeed.tech/tags/can-bus.md>), [colors](<https://devfeed.tech/tags/colors.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [development](<https://devfeed.tech/tags/development.md>), [development-kit](<https://devfeed.tech/tags/development-kit.md>), [devkit](<https://devfeed.tech/tags/devkit.md>), [din-rail](<https://devfeed.tech/tags/din-rail.md>), [display](<https://devfeed.tech/tags/display.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-s31](<https://devfeed.tech/tags/esp32-s31.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [flash](<https://devfeed.tech/tags/flash.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [matter](<https://devfeed.tech/tags/matter.md>), [optional](<https://devfeed.tech/tags/optional.md>), [rs485](<https://devfeed.tech/tags/rs485.md>), [thread](<https://devfeed.tech/tags/thread.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The Waveshare ESP32-S31-Touch-LCD-4.3C combines an ESP32-S31 with a 4.3-inch, 800x480 five-point touchscreen, RS485, CAN FD, Wi-Fi 6, Bluetooth 5.4 and 802.15.4. It has 16MB flash and PSRAM, stereo audio, microphones, a microSD slot, and expansion GPIO. Power options are 7-36V through a terminal block, 5V USB-C, or a 3.7V battery; case and battery availability varies by SKU. Compared with the similar VIEWE model, Waveshare supports 65K rather than 16.7M display colors, but adds the wider input range, optional DIN-rail case, and battery support. Waveshare provides ESP-IDF 6.1 code samples, firmware, schematics and mechanical files.

### Source excerpt

Last month we wrote about VIEWE's ESP32-S31 4.3-inch touch display, but there's now another option, namely the Waveshare ESP32-S31-Touch-LCD-4.3C development kit. Both models are similar, with an ESP32-S31 module equipped with 16MB flash and 16MB PSRAM, a 4.3-inch 800x480 touchscreen display, RS485 and CAN Bus interfaces, and more. The EVIEW model supports 16.7M colors, while the Waveshare devkit is limited to 65K colors, but it offers a wider 7V-36V voltage input, an optional DIN rail enclosure, and 3.7V Lithium battery support. Waveshare ESP32-S31-Touch-LCD-4.3C specifications: Wireless module - ESP32-S31-WROOM-3-N16R16V SoC - ESP32-S31NRV16 CPU RISC-V HP (High-performance) RV32IMAFCP CPU @ 320 MHz with FPU, SIMD, etc. RISC-V LP (Low-power) MCU core Memory - 512 KB SRAM, 32 KB low-power SRAM, 16MB PSRAM Wireless - 2.4 GHz WiFi 6 (802.11ax) Bluetooth 5.4 with support for LE Audio, direction finding, Bluetooth Mesh 1.1, and Classic (BR/EDR) 802.15.4 radio for Zigbee, Thread, and Matter Storage [...] The post Waveshare ESP32-S31-Touch-LCD-4.3C - An ESP32-S31 4.3-inch display devkit with optional DIN rail case appeared first on CNX Software - Embedded Systems News.

## Serial: The Port That Won't Die

DevFeed: [Serial: The Port That Won't Die](<https://devfeed.tech/articles/serial-the-port-that-won-t-die-141127.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/18/serial-the-port-that-wont-die/>)

Author: Al Williams

Published: 2026-11-18T18:00:31Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [communications](<https://devfeed.tech/topics/communications.md>), [Electrical engineering and computer science (EECS)](<https://devfeed.tech/topics/electrical-engineering-and-computer-science-eecs.md>), [USB](<https://devfeed.tech/topics/usb.md>), [io interface](<https://devfeed.tech/topics/io-interface.md>)

Tags: [1-5](<https://devfeed.tech/tags/1-5.md>), [17](<https://devfeed.tech/tags/17.md>), [2](<https://devfeed.tech/tags/2.md>), [22](<https://devfeed.tech/tags/22.md>), [3](<https://devfeed.tech/tags/3.md>), [adapters](<https://devfeed.tech/tags/adapters.md>), [after](<https://devfeed.tech/tags/after.md>), [all](<https://devfeed.tech/tags/all.md>), [also](<https://devfeed.tech/tags/also.md>), [analyzer](<https://devfeed.tech/tags/analyzer.md>), [classic-hacks](<https://devfeed.tech/tags/classic-hacks.md>), [computer](<https://devfeed.tech/tags/computer.md>), [computer-hacks](<https://devfeed.tech/tags/computer-hacks.md>), [computers](<https://devfeed.tech/tags/computers.md>), [featured](<https://devfeed.tech/tags/featured.md>), [good](<https://devfeed.tech/tags/good.md>), [interest](<https://devfeed.tech/tags/interest.md>), [modern](<https://devfeed.tech/tags/modern.md>), [more](<https://devfeed.tech/tags/more.md>), [over](<https://devfeed.tech/tags/over.md>), [parallel](<https://devfeed.tech/tags/parallel.md>), [port](<https://devfeed.tech/tags/port.md>), [printer](<https://devfeed.tech/tags/printer.md>), [rs232](<https://devfeed.tech/tags/rs232.md>), [serial](<https://devfeed.tech/tags/serial.md>), [serial-port](<https://devfeed.tech/tags/serial-port.md>)

### AI overview

Serial communication persists because it is simple, inexpensive, and easy to debug, despite most PCs now using USB-to-serial adapters. The article traces the path from teleprinter current loops to RS-232, whose voltage and signal conventions define the electrical link but not the data's meaning. Reliable communication requires both ends to agree on asynchronous framing and settings such as baud rate, data bits, parity, and stop bits; flow control and null-modem wiring vary across devices. USB adapters can expose virtual COM, ttyUSB, or ttyACM ports, while microcontrollers may use logic-level serial. Check voltage and signal compatibility: RS-232 levels can damage a microcontroller input, and a 5 V cable may be unsuitable for a 3.3 V system. The article also notes that serial links can be inspected with an oscilloscope, logic analyzer, or software.

### Source excerpt

Computers have changed quite a bit over the last 60 years. Good luck plugging in an old MFM disk into your modern computer. Plugging in a parallel printer is difficult, ...read more

## Rockchip RK3668 switches to Cortex-A725 and Cortex-A520 cores, engineering samples planned for Q1 2027

DevFeed: [Rockchip RK3668 switches to Cortex-A725 and Cortex-A520 cores, engineering samples planned for Q1 2027](<https://devfeed.tech/articles/rockchip-rk3668-switches-to-cortex-a725-and-cortex-a520-cores-engineering-samples-planned-for-q1-2027-136389.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/17/rockchip-rk3668-switches-to-cortex-a725-and-cortex-a520-cores-engineering-samples-planned-for-q1-2027/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-17T00:00:50Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [armv9](<https://devfeed.tech/topics/armv9.md>), [Arm](<https://devfeed.tech/topics/arm.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [10gbe](<https://devfeed.tech/tags/10gbe.md>), [android](<https://devfeed.tech/tags/android.md>), [armsom](<https://devfeed.tech/tags/armsom.md>), [armv9](<https://devfeed.tech/tags/armv9.md>), [artificial-intelligence-ai](<https://devfeed.tech/tags/artificial-intelligence-ai.md>), [benchmarks](<https://devfeed.tech/tags/benchmarks.md>), [board](<https://devfeed.tech/tags/board.md>), [computers](<https://devfeed.tech/tags/computers.md>), [core](<https://devfeed.tech/tags/core.md>), [cortex](<https://devfeed.tech/tags/cortex.md>), [cortex-a520](<https://devfeed.tech/tags/cortex-a520.md>), [cortex-a725](<https://devfeed.tech/tags/cortex-a725.md>), [cortex-m52](<https://devfeed.tech/tags/cortex-m52.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [embedded-systems](<https://devfeed.tech/tags/embedded-systems.md>), [engineering](<https://devfeed.tech/tags/engineering.md>), [geekbench](<https://devfeed.tech/tags/geekbench.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [nvr](<https://devfeed.tech/tags/nvr.md>), [pcie](<https://devfeed.tech/tags/pcie.md>), [processor](<https://devfeed.tech/tags/processor.md>), [prototypes](<https://devfeed.tech/tags/prototypes.md>), [q1](<https://devfeed.tech/tags/q1.md>), [radxa](<https://devfeed.tech/tags/radxa.md>), [roadmap](<https://devfeed.tech/tags/roadmap.md>), [rockchip](<https://devfeed.tech/tags/rockchip.md>), [rockchip-rk36xx](<https://devfeed.tech/tags/rockchip-rk36xx.md>), [sata](<https://devfeed.tech/tags/sata.md>), [scheduled](<https://devfeed.tech/tags/scheduled.md>), [single-board-computers](<https://devfeed.tech/tags/single-board-computers.md>), [soc](<https://devfeed.tech/tags/soc.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [switches](<https://devfeed.tech/tags/switches.md>)

### AI overview

The preliminary RK3668 specifications describe an 8-core Armv9 processor with six Cortex-A725 cores and two Cortex-A520 cores, replacing the 10-core configuration announced in 2025. Rockchip estimates clock speeds up to 2.5 GHz and 2.2 GHz, respectively. The excerpt reports up to 44 TOPS for its sparse NPU, LPDDR6 support with up to 90 GB/s usable bandwidth, UFS 4.0 storage, and support for up to two 8Kp60 displays. Rockchip's cited comparisons claim roughly twice the RK3588's multicore CPU performance and GPU frame rate, plus a 49% single-core gain; the article cautions that NPU TOPS figures are not workload benchmarks. Some interface and bandwidth details remain unclear, and no block diagram was available for cross-checking. Engineering samples are scheduled for Q1 2027, with early single-board-computer prototypes expected in the first half of 2027.

### Source excerpt

More details have surfaced about the Rockchip RK3668 processor. The biggest change is that the Armv9 SoC will feature eight cores (6x Cortex-A725 and 2x Cortex-A520), rather than ten cores in a 4x Cortex-A730 + 6x Cortex-A530 configuration announced at its initial unveiling in July 2025. Mostly because the A730 and A530 cores have never been launched... We also have more detailed specifications thanks to posts from Radxa and ArmSoM, who shared the "RK3668 Application" document. That document also includes a roadmap showing that the 6nm Rockchip RK3668 processor is now scheduled for Q1 2027 (engineering samples), and the flagship RK3688 processor should probably be available at the end of 2027 or in 2028, although the time scale in the roadmap may be deceiving... Early prototypes of RK3668 single board computers should come in H1 2027. Rockchip RK3668 specifications: Octa-core CPU - 6x Cortex-A725 cores @ up to 2.5 [...] The post Rockchip RK3668 switches to Cortex-A725 and Cortex-A520 cores, engineering samples planned for Q1 2027 appeared first on CNX Software - Embedded Systems News.

## A USB worm's second life: Retadup spreading CoffeeLoader

DevFeed: [A USB worm's second life: Retadup spreading CoffeeLoader](<https://devfeed.tech/articles/a-usb-worm-s-second-life-retadup-spreading-coffeeloader-135368.md>)

Original publisher: [Read original article](<https://securelist.com/retadup-delivers-coffeeloader/121908/>)

Author: Oleg Kupreev

Published: 2026-11-16T07:00:37Z

Content type: news

Language: en

Sources: [Securelist](<https://devfeed.tech/sources/securelist.md>)

Topics: [Remote Access Trojan](<https://devfeed.tech/topics/remote-access-trojan.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [2017](<https://devfeed.tech/tags/2017.md>), [2019](<https://devfeed.tech/tags/2019.md>), [2025](<https://devfeed.tech/tags/2025.md>), [2026](<https://devfeed.tech/tags/2026.md>), [2d](<https://devfeed.tech/tags/2d.md>), [32-bit](<https://devfeed.tech/tags/32-bit.md>), [3d](<https://devfeed.tech/tags/3d.md>), [3d-graphics](<https://devfeed.tech/tags/3d-graphics.md>), [7-zip](<https://devfeed.tech/tags/7-zip.md>), [coffeeloader](<https://devfeed.tech/tags/coffeeloader.md>), [full](<https://devfeed.tech/tags/full.md>), [infrastructure](<https://devfeed.tech/tags/infrastructure.md>), [large](<https://devfeed.tech/tags/large.md>), [law](<https://devfeed.tech/tags/law.md>), [law-enforcement](<https://devfeed.tech/tags/law-enforcement.md>), [life](<https://devfeed.tech/tags/life.md>), [malware](<https://devfeed.tech/tags/malware.md>), [malware-descriptions](<https://devfeed.tech/tags/malware-descriptions.md>), [malware-technologies](<https://devfeed.tech/tags/malware-technologies.md>), [medium](<https://devfeed.tech/tags/medium.md>), [retadup](<https://devfeed.tech/tags/retadup.md>), [seized](<https://devfeed.tech/tags/seized.md>), [thumbnail](<https://devfeed.tech/tags/thumbnail.md>), [trojan](<https://devfeed.tech/tags/trojan.md>), [usb](<https://devfeed.tech/tags/usb.md>), [version](<https://devfeed.tech/tags/version.md>), [was](<https://devfeed.tech/tags/was.md>), [windows-malware](<https://devfeed.tech/tags/windows-malware.md>), [worm](<https://devfeed.tech/tags/worm.md>)

### AI overview

In August 2026, researchers found CoffeeLoader spreading through Retadup, a USB worm whose command servers were revived after its 2019 takedown. The new Armoury packer uses OpenGL instead of OpenCL and delivers a CoffeeLoader downloader that establishes persistence, injects into Windows processes, and retrieves the main payload over HTTPS. The downloader checks a response signature and decrypted-payload MD5 before execution; the main module's functionality is otherwise unchanged, though its protocol markers and cryptographic details differ. Retadup copies itself to connected drives as hidden files and shortcuts, spreading when users open those shortcuts. The campaign was smaller than the original botnet: reported detections blocked infection attempts on about 15,000 systems in the first three quarters of the year, concentrated in Peru, Angola, Russia, and Bolivia. The researchers do not know whether Retadup's original author or someone else revived its servers.

### Source excerpt

A new version of CoffeeLoader is spreading through Retadup, an old USB worm whose infrastructure was seized by law enforcement back in 2019.

## Reverse Engineer that USB Device in Style

DevFeed: [Reverse Engineer that USB Device in Style](<https://devfeed.tech/articles/reverse-engineer-that-usb-device-in-style-134308.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/15/reverse-engineer-that-usb-device-in-style/>)

Author: Elliot Williams

Published: 2026-11-15T09:00:44Z

Content type: tutorial

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [Reverse Engineering](<https://devfeed.tech/topics/reverse-engineering.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [computer-hacks](<https://devfeed.tech/tags/computer-hacks.md>), [drivers](<https://devfeed.tech/tags/drivers.md>), [reverse](<https://devfeed.tech/tags/reverse.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [tools](<https://devfeed.tech/tags/tools.md>), [usb](<https://devfeed.tech/tags/usb.md>)

### AI overview

usb-rea helps document USB protocols by capturing device traffic while you annotate actions in the vendor app. It timestamps traffic against those actions, then generates a report, a driver scaffold, and a Wireshark dissector. The `lookup` command checks whether a device's VID:PID is already in its dataset. The tool does not eliminate the need for proprietary software: the vendor driver or app must still run during recording. The text notes that the dataset mainly covers computer cooling and lighting peripherals, and that the author's mouse was not listed.

### Source excerpt

Proprietary device drivers, dedicated applications, and their ilk are the bane of the open-source hacker. If only we could snoop on every device out there, recording the "secret" USB transactions ...read more

## DOOM on a USB flash drive

DevFeed: [DOOM on a USB flash drive](<https://devfeed.tech/articles/doom-on-a-usb-flash-drive-132517.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/13/doom-on-a-usb-flash-drive/>)

Author: Anne Barela

Published: 2026-11-13T17:06:47Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [doom](<https://devfeed.tech/tags/doom.md>), [drive](<https://devfeed.tech/tags/drive.md>), [flash](<https://devfeed.tech/tags/flash.md>), [game](<https://devfeed.tech/tags/game.md>), [gaming](<https://devfeed.tech/tags/gaming.md>), [github](<https://devfeed.tech/tags/github.md>), [lcd](<https://devfeed.tech/tags/lcd.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [processing](<https://devfeed.tech/tags/processing.md>), [python](<https://devfeed.tech/tags/python.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [usb](<https://devfeed.tech/tags/usb.md>), [video](<https://devfeed.tech/tags/video.md>), [vintage-computing](<https://devfeed.tech/tags/vintage-computing.md>), [youtube](<https://devfeed.tech/tags/youtube.md>)

### AI overview

Aaron Christophel ported DOOM to a MOVESPEED MSSU10 USB flash drive, which has enough processing power to run the game. Its built-in LCD normally displays connection speed, read and write activity, and temperature; the video shows the game running on the drive.

### Source excerpt

Aaron Christophel has ported DOOM to a USB flash drive, and he shows it running in a video on his YouTube channel. The drive is a MOVESPEED MSSU10, which has a small LCD built-in. Out of the box that screen shows the connection speed, read and write activity, and the drive's temperature. There's enough processing [...]

## KDE Frameworks 6.32 Released With That Fix For USB File Transfer Notifications

DevFeed: [KDE Frameworks 6.32 Released With That Fix For USB File Transfer Notifications](<https://devfeed.tech/articles/kde-frameworks-6-32-released-with-that-fix-for-usb-file-transfer-notifications-132529.md>)

Original publisher: [Read original article](<https://www.phoronix.com/news/KDE-Frameworks-6.32>)

Author: Michael Larabel

Published: 2026-11-13T17:02:33Z

Content type: release

Language: en

Sources: [Phoronix](<https://devfeed.tech/sources/phoronix.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [notifications](<https://devfeed.tech/topics/notifications.md>)

Tags: [bug](<https://devfeed.tech/tags/bug.md>), [desktop-linux](<https://devfeed.tech/tags/desktop-linux.md>), [file-transfer](<https://devfeed.tech/tags/file-transfer.md>), [frameworks](<https://devfeed.tech/tags/frameworks.md>), [kde](<https://devfeed.tech/tags/kde.md>), [linux-benchmarking](<https://devfeed.tech/tags/linux-benchmarking.md>), [linux-hardware-benchmarks](<https://devfeed.tech/tags/linux-hardware-benchmarks.md>), [linux-hardware-reviews](<https://devfeed.tech/tags/linux-hardware-reviews.md>), [linux-how-to](<https://devfeed.tech/tags/linux-how-to.md>), [linux-performance](<https://devfeed.tech/tags/linux-performance.md>), [linux-server-benchmarks](<https://devfeed.tech/tags/linux-server-benchmarks.md>), [notifications](<https://devfeed.tech/tags/notifications.md>), [open-source-graphics](<https://devfeed.tech/tags/open-source-graphics.md>), [phoronix](<https://devfeed.tech/tags/phoronix.md>), [phoronix-test-suite](<https://devfeed.tech/tags/phoronix-test-suite.md>), [ubuntu-benchmarks](<https://devfeed.tech/tags/ubuntu-benchmarks.md>), [ubuntu-hardware](<https://devfeed.tech/tags/ubuntu-hardware.md>), [usb](<https://devfeed.tech/tags/usb.md>)

### AI overview

KDE Frameworks 6.32 fixes inaccurate completion notifications for file copies to removable USB drives. Previously, the notification could appear once data reached the local cache, before it was actually written to the device. The update uses the sync_file_range system call to address this. The excerpt also notes fixes and updates to Baloo, KArchive, Kirigami, and syntax highlighting, but provides no further detail on those changes.

### Source excerpt

KDE Frameworks 6.32 shipped today as the newest monthly update to this set of KDE components. Notable this month is a fix for the previously-reported 15 year old bug around inaccurate notifications for USB file transfers...

## USBnet: Internet via USB (and HID!)

DevFeed: [USBnet: Internet via USB (and HID!)](<https://devfeed.tech/articles/usbnet-internet-via-usb-and-hid-130701.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/12/usbnet-internet-via-usb-and-hid/>)

Author: Anne Barela

Published: 2026-11-12T18:00:58Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [TCP/IP](<https://devfeed.tech/topics/tcp-ip.md>), [Internet](<https://devfeed.tech/topics/internet.md>), [proxy](<https://devfeed.tech/topics/proxy.md>)

Tags: [allowed](<https://devfeed.tech/tags/allowed.md>), [block](<https://devfeed.tech/tags/block.md>), [board](<https://devfeed.tech/tags/board.md>), [button](<https://devfeed.tech/tags/button.md>), [ch32v467](<https://devfeed.tech/tags/ch32v467.md>), [classes](<https://devfeed.tech/tags/classes.md>), [client](<https://devfeed.tech/tags/client.md>), [computers](<https://devfeed.tech/tags/computers.md>), [configuration](<https://devfeed.tech/tags/configuration.md>), [github](<https://devfeed.tech/tags/github.md>), [hid](<https://devfeed.tech/tags/hid.md>), [http](<https://devfeed.tech/tags/http.md>), [http-proxy](<https://devfeed.tech/tags/http-proxy.md>), [internet](<https://devfeed.tech/tags/internet.md>), [local](<https://devfeed.tech/tags/local.md>), [microcontrollers](<https://devfeed.tech/tags/microcontrollers.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [proxy](<https://devfeed.tech/tags/proxy.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [server](<https://devfeed.tech/tags/server.md>), [tcp](<https://devfeed.tech/tags/tcp.md>), [upstream](<https://devfeed.tech/tags/upstream.md>), [usb](<https://devfeed.tech/tags/usb.md>), [usbnet](<https://devfeed.tech/tags/usbnet.md>)

### AI overview

USBnet tunnels TCP connections between two computers through a CH32V467WEU6 board connected to both over USB. Its client exposes an HTTP proxy at 127.0.0.1:8080, and its server opens upstream connections. To work around computers that restrict USB device classes, it can carry packets over HID and present as a mouse. Holding USER while resetting enters configuration mode, where the board appears as USBnet Configuration (1a86:fe53) and its flash-stored profile can be edited; port modes are relay and custom. Performance figures have different conditions: relay measurements were over a local link and mainly reflect the tunnel, while emulated figures used speedtest.net over the internet and include the connection. Firmware uses WCH's RISC-V toolchain from MounRiver.

### Source excerpt

Ismael has published USBnet on GitHub, a project that tunnels TCP connections between two computers over a single CH32V467WEU6 board. The board plugs into both machines over USB. On one side the client offers a local HTTP proxy at 127.0.0.1:8080, and on the other side the server opens the upstream TCP connections to the internet. [...]

## USB-C Hub or Nintendo Switch 2 Dock? Relax, It's Both!

DevFeed: [USB-C Hub or Nintendo Switch 2 Dock? Relax, It's Both!](<https://devfeed.tech/articles/usb-c-hub-or-nintendo-switch-2-dock-relax-it-s-both-130495.md>)

Original publisher: [Read original article](<https://hackaday.com/2026/11/12/usb-c-hub-or-nintendo-switch-2-dock-relax-its-both/>)

Author: Al Williams

Published: 2026-11-12T16:30:58Z

Content type: article

Language: en

Sources: [Hackaday](<https://devfeed.tech/sources/hackaday.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [monitor](<https://devfeed.tech/topics/monitor.md>)

Tags: [color](<https://devfeed.tech/tags/color.md>), [dock](<https://devfeed.tech/tags/dock.md>), [hdr](<https://devfeed.tech/tags/hdr.md>), [hub](<https://devfeed.tech/tags/hub.md>), [nintendo-hacks](<https://devfeed.tech/tags/nintendo-hacks.md>), [nintendo-switch-2](<https://devfeed.tech/tags/nintendo-switch-2.md>), [nintendo-switch-dock](<https://devfeed.tech/tags/nintendo-switch-dock.md>), [power-delivery](<https://devfeed.tech/tags/power-delivery.md>), [proprietary-protocol](<https://devfeed.tech/tags/proprietary-protocol.md>), [refresh-rate](<https://devfeed.tech/tags/refresh-rate.md>), [reverse-engineering](<https://devfeed.tech/tags/reverse-engineering.md>), [travel](<https://devfeed.tech/tags/travel.md>), [usb-c](<https://devfeed.tech/tags/usb-c.md>)

### AI overview

A USB-C hub can be made to enable Nintendo Switch 2 TV mode with firmware changes: the hub already charged the console and began DisplayPort initialization, but needed a patch to complete the Switch's proprietary protocol. HDR initially appeared washed out; a separate chip patch corrected the HDR TV color tag. HDR over DisplayPort still lacks a patch, and variable refresh rate does not work. The excerpt does not provide the patch code.

### Source excerpt

[Nozomi] travels with a Nintendo Switch 2, but the official dock is bulky and doesn't seem to be made for travel. USB-C hubs with displays are common, but they won't ...read more

## WeAct Logic Analyzer V2 - a $10 USB 3.0 CH32H417 logic analyzer board

DevFeed: [WeAct Logic Analyzer V2 - a $10 USB 3.0 CH32H417 logic analyzer board](<https://devfeed.tech/articles/weact-logic-analyzer-v2-a-10-usb-3-0-ch32h417-logic-analyzer-board-130474.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/11/12/weact-logic-analyzer-v2-a-10-usb-3-0-ch32h417-logic-analyzer-board/>)

Author: Anne Barela

Published: 2026-11-12T14:44:23Z

Content type: article

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [3](<https://devfeed.tech/tags/3.md>), [about](<https://devfeed.tech/tags/about.md>), [analyzer](<https://devfeed.tech/tags/analyzer.md>), [apps](<https://devfeed.tech/tags/apps.md>), [bandwidth](<https://devfeed.tech/tags/bandwidth.md>), [board](<https://devfeed.tech/tags/board.md>), [channel](<https://devfeed.tech/tags/channel.md>), [components-parts](<https://devfeed.tech/tags/components-parts.md>), [dap](<https://devfeed.tech/tags/dap.md>), [debug](<https://devfeed.tech/tags/debug.md>), [ee](<https://devfeed.tech/tags/ee.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [flash](<https://devfeed.tech/tags/flash.md>), [github](<https://devfeed.tech/tags/github.md>), [logic](<https://devfeed.tech/tags/logic.md>), [logic-analyzer](<https://devfeed.tech/tags/logic-analyzer.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [plus](<https://devfeed.tech/tags/plus.md>), [separate](<https://devfeed.tech/tags/separate.md>), [serial](<https://devfeed.tech/tags/serial.md>), [sigrok](<https://devfeed.tech/tags/sigrok.md>), [small](<https://devfeed.tech/tags/small.md>), [software](<https://devfeed.tech/tags/software.md>), [usb](<https://devfeed.tech/tags/usb.md>), [v2](<https://devfeed.tech/tags/v2.md>), [wch-ch32h417](<https://devfeed.tech/tags/wch-ch32h417.md>), [weact](<https://devfeed.tech/tags/weact.md>)

### AI overview

The WeAct Studio Logic Analyzer V2 is a roughly $10 board built around the WCH CH32H417, offering 16-channel USB 3.0 logic analysis with up to 200 MHz bandwidth. A board button selects among three flash-resident apps: the logic analyzer, a USB-serial/CMSIS-DAP debug probe, or a slot for user firmware. Captures use U3LogicAnalyzer, a Sigrok/PulseView fork for Windows and Linux; V2 support is not reported in the main Sigrok project, which the excerpt describes as apparently dormant. The repository links open-source tools for capture, firmware updates, and flashing Arm Cortex-M targets, plus documentation and sample user-app source. However, the logic-analyzer and DAP firmware are closed-source binaries. The board is sold through AliExpress for about $10, with shipping and taxes extra.

### Source excerpt

Jean-Luc Aufranc writes at CNX Software about the WeAct Studio Logic Analyzer V2, a small board built around the WCH CH32H417 that works as a 16-channel USB 3.0 logic analyzer with up to 200 MHz bandwidth. The board holds three separate apps at different addresses in flash: the logic analyzer, a USB-serial plus CMSIS-DAP debug [...]

## VZMORE iX9 Max (U9-185H) mini PC review - Part 1: Specs, unboxing, teardown, and first boot

DevFeed: [VZMORE iX9 Max (U9-185H) mini PC review - Part 1: Specs, unboxing, teardown, and first boot](<https://devfeed.tech/articles/vzmore-ix9-max-u9-185h-mini-pc-review-part-1-specs-unboxing-teardown-and-first-boot-130426.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/12/vzmore-ix9-max-u9-185h-mini-pc-review-part-1-specs-unboxing-teardown-and-first-boot/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-12T09:34:02Z

Content type: article

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [pc](<https://devfeed.tech/topics/pc.md>), [USB](<https://devfeed.tech/topics/usb.md>), [NVMe](<https://devfeed.tech/topics/nvme.md>), [Intel Core](<https://devfeed.tech/topics/intel-core.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [boot](<https://devfeed.tech/topics/boot.md>), [Ubuntu](<https://devfeed.tech/topics/ubuntu.md>)

Tags: [2-5gbe](<https://devfeed.tech/tags/2-5gbe.md>), [artificial-intelligence-ai](<https://devfeed.tech/tags/artificial-intelligence-ai.md>), [boot](<https://devfeed.tech/tags/boot.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hdmi](<https://devfeed.tech/tags/hdmi.md>), [intel](<https://devfeed.tech/tags/intel.md>), [intel-core](<https://devfeed.tech/tags/intel-core.md>), [lpddr5](<https://devfeed.tech/tags/lpddr5.md>), [memory](<https://devfeed.tech/tags/memory.md>), [meteor-lake](<https://devfeed.tech/tags/meteor-lake.md>), [mini-pc](<https://devfeed.tech/tags/mini-pc.md>), [nvme](<https://devfeed.tech/tags/nvme.md>), [nvme-ssd](<https://devfeed.tech/tags/nvme-ssd.md>), [processor](<https://devfeed.tech/tags/processor.md>), [review](<https://devfeed.tech/tags/review.md>), [reviews](<https://devfeed.tech/tags/reviews.md>), [soc](<https://devfeed.tech/tags/soc.md>), [specifications](<https://devfeed.tech/tags/specifications.md>), [ssd](<https://devfeed.tech/tags/ssd.md>), [teardown](<https://devfeed.tech/tags/teardown.md>), [testing](<https://devfeed.tech/tags/testing.md>), [thread](<https://devfeed.tech/tags/thread.md>), [thunderbolt](<https://devfeed.tech/tags/thunderbolt.md>), [vzmore](<https://devfeed.tech/tags/vzmore.md>), [wifi-7](<https://devfeed.tech/tags/wifi-7.md>), [windows-11](<https://devfeed.tech/tags/windows-11.md>)

### AI overview

The VZMORE iX9 Max is a compact mini PC with an Intel Core Ultra 9 185H, 24 GB soldered, non-upgradeable LPDDR5 memory, and a 1 TB NVMe SSD; a second M.2 slot allows storage expansion. It supports four displays, dual 2.5 GbE, Wi-Fi 7, Bluetooth 5.4, and two 40 Gbps USB4 ports. Teardown found a Lexar PCIe 4.0 SSD, an unused M.2 2242 slot, and a MediaTek wireless module; the motherboard appears identical to the GEEKOM IT13 Max, while cooling, enclosure, SSD, and wireless module differ. The system booted into activated Windows 11 Pro. The article says testing and benchmarks on Windows and Ubuntu are planned for a later installment, so it does not establish performance or Linux compatibility.

### Source excerpt

VZMORE sent us a review sample of the iX9 Max mini PC powered by an Intel Core Ultra 9 185H 16-core/22-thread Meteor Lake processor clocked at up to 5.1 GHz, paired with 24 GB of LPDDR5-5600 memory and a 1 TB NVMe SSD. It supports up to four simultaneous displays via HDMI 2.0 and USB4 ports, offers six USB Type-A ports, two 40 Gbps USB4 ports, and two 2.5 GbE ports, as well as Wi-Fi 7 and Bluetooth 5.4 wireless connectivity. In this article, we will list the specifications, go through an unboxing and a teardown to check out the hardware, and boot the system to the pre-installed Windows 11 Pro operating system. A more detailed review with feature testing and benchmarks on both Windows 11 and Ubuntu 26.04 will be published in a few weeks. VZMORE iX9 Max mini PC specifications SoC - Intel Core Ultra 9 185H CPU [...] The post VZMORE iX9 Max (U9-185H) mini PC review - Part 1: Specs, unboxing, teardown, and first boot appeared first on CNX Software - Embedded Systems News.

## WeAct Logic Analyzer V2 - A $10 USB 3.0 logic analyzer board compatible with Sigrok/Pulseview (fork)

DevFeed: [WeAct Logic Analyzer V2 - A $10 USB 3.0 logic analyzer board compatible with Sigrok/Pulseview (fork)](<https://devfeed.tech/articles/weact-logic-analyzer-v2-a-10-usb-3-0-logic-analyzer-board-compatible-with-sigrok-pulseview-fork-129940.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/12/weact-logic-analyzer-v2-a-10-usb-3-0-logic-analyzer-board-compatible-with-sigrok-pulseview/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-12T04:34:45Z

Content type: article

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Embedded Software Dev](<https://devfeed.tech/topics/embedded-software-dev.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>)

Tags: [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [debugging](<https://devfeed.tech/tags/debugging.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [electronics](<https://devfeed.tech/tags/electronics.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [logic-analyzer](<https://devfeed.tech/tags/logic-analyzer.md>), [risc-v](<https://devfeed.tech/tags/risc-v.md>), [sigrok](<https://devfeed.tech/tags/sigrok.md>), [tools](<https://devfeed.tech/tags/tools.md>), [usb](<https://devfeed.tech/tags/usb.md>), [wch](<https://devfeed.tech/tags/wch.md>), [weact](<https://devfeed.tech/tags/weact.md>)

### AI overview

The WeAct Logic Analyzer V2 is a roughly $10 CH32H417 board offering up to 16 logic-analyzer channels and 200 MHz sampling over USB 3.0; over USB 2.0, the listed rates are lower and depend on channel count (4-20 MHz at 16 channels, 4-40 MHz at 8). Captures are limited by PC memory, with the excerpt estimating about 45 seconds at 200 MHz/16 channels or 90 seconds at 8 channels. A button switches among logic analyzer, USB-serial plus CMSIS-DAP, and a user-firmware slot. The analyzer requires WeAct's U3LogicAnalyzer software for Windows or Linux, described as Sigrok/PulseView-based; upstream Sigrok support is not indicated. WeAct provides upgrade and DAP-flashing tools, but the analyzer and DAP firmware are closed-source binaries. The board also has 132 protocol decoders and a 304 KB user-app flash slot.

### Source excerpt

WeAct Studio Logic Analyzer V2 is a low-cost, small WCH CH32H417 board designed to be used as a 16-channel USB 3.0 logic analyzer with up to 200 MHz bandwidth. The company says the board runs three different "apps": logic analyzer, USB-serial + DAP, or custom firmware developed by the user, all located at different addresses on the flash and selected by simply pressing the button on the board. WeAct Logic Analyzer V2 board specifications: MCU - WCH CH32H417 CPU cores QingKe RISC-V5F up to 400 MHz QingKe RISC-V3F up to 144 MHz GPU - Graphics Processing Hardware Accelerator GPHA Memory - 896KB SRAM Storage - 960KB flash; 304 KB slot for "user app"/custom firmware (slot 2 @ 0x0809E000 in flash) USB - 1x USB 3.0 Type-C port for power, data, and programming Expansion header - 20-pin GPIO header with 16x GPIO, 4x GND pins Logic analyzer features (slot 0 @ [...] The post WeAct Logic Analyzer V2 - A $10 USB 3.0 logic analyzer board compatible with Sigrok/Pulseview (fork) appeared first on CNX Software - Embedded Systems News.

## Iomega Zip Drive: Elite Floppy Disks Before USB Sticks

DevFeed: [Iomega Zip Drive: Elite Floppy Disks Before USB Sticks](<https://devfeed.tech/articles/iomega-zip-drive-elite-floppy-disks-before-usb-sticks-125692.md>)

Original publisher: [Read original article](<https://www.techspot.com/article/3177-legends-iomega-zip/>)

Author: Amir Shoam

Published: 2026-11-10T10:17:00Z

Content type: article

Language: en

Sources: [TechSpot](<https://devfeed.tech/sources/techspot.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [Internet](<https://devfeed.tech/topics/internet.md>)

Tags: [aol](<https://devfeed.tech/tags/aol.md>), [apple](<https://devfeed.tech/tags/apple.md>), [backing-up](<https://devfeed.tech/tags/backing-up.md>), [bankruptcy](<https://devfeed.tech/tags/bankruptcy.md>), [bernoulli](<https://devfeed.tech/tags/bernoulli.md>), [broadband](<https://devfeed.tech/tags/broadband.md>), [files](<https://devfeed.tech/tags/files.md>), [floppy](<https://devfeed.tech/tags/floppy.md>), [iomega](<https://devfeed.tech/tags/iomega.md>), [usb](<https://devfeed.tech/tags/usb.md>), [zip-drive](<https://devfeed.tech/tags/zip-drive.md>)

### AI overview

Iomega's Zip drive made portable storage practical for larger files in the 1990s by packing 100MB into a sturdy pocket-sized disk that spun faster than standard floppies. Its $199 launch, simple consumer-focused design, retail marketing, and early lead helped drive rapid adoption; it complemented rather than replaced 1.44MB disks, which remained cheaper to give away. The article traces Iomega's growth and stock hype, then describes reliability complaints known as the "click of death," costly support, and a class-action settlement. Later super-floppy formats failed to dislodge Zip, but USB flash drives offered disk-free storage and quickly gained capacity as prices fell. Zip sales declined, and Iomega discontinued the format in 2004 after selling 50 million drives and 310 million disks.

### Source excerpt

With 100MB in a disk that fit in your pocket, the Zip drive was the coolest way to carry files in the 1990s. It made Iomega a Wall Street darling, until thumb drives and the click of death caught up. Read Entire Article

## Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating

DevFeed: [Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating](<https://devfeed.tech/articles/seeed-studio-xiao-stm32c5-development-board-features-dual-can-fd-and-a-6-axis-imu-with-programmable-heating-123536.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/09/seeed-studio-xiao-stm32c5-development-board-features-dual-can-fd-and-a-6-axis-imu-with-programmable-heating/>)

Author: Debashis Das

Published: 2026-11-09T12:00:41Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [seeed studio](<https://devfeed.tech/topics/seeed-studio.md>), [Arm](<https://devfeed.tech/topics/arm.md>), [Robotics](<https://devfeed.tech/topics/robotics.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [automation](<https://devfeed.tech/tags/automation.md>), [battery](<https://devfeed.tech/tags/battery.md>), [can](<https://devfeed.tech/tags/can.md>), [can-bus](<https://devfeed.tech/tags/can-bus.md>), [cortex-m33](<https://devfeed.tech/tags/cortex-m33.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [firmware](<https://devfeed.tech/tags/firmware.md>), [flash](<https://devfeed.tech/tags/flash.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [imu](<https://devfeed.tech/tags/imu.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [micropython](<https://devfeed.tech/tags/micropython.md>), [motion-sensing](<https://devfeed.tech/tags/motion-sensing.md>), [robotics](<https://devfeed.tech/tags/robotics.md>), [rtos](<https://devfeed.tech/tags/rtos.md>), [seeed-studio](<https://devfeed.tech/tags/seeed-studio.md>), [sensors](<https://devfeed.tech/tags/sensors.md>), [stm32](<https://devfeed.tech/tags/stm32.md>), [stmicro-stm32](<https://devfeed.tech/tags/stmicro-stm32.md>), [stmicroelectronics](<https://devfeed.tech/tags/stmicroelectronics.md>), [usb-c](<https://devfeed.tech/tags/usb-c.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

The XIAO STM32C5 pairs a 144 MHz STM32C5A3CG Arm Cortex-M33 with two CAN FD controllers and a 6-axis LSM6DS3TR-C IMU whose temperature can be regulated by PWM-controlled heating resistors to help reduce temperature-related motion-measurement drift. FDCAN2 connects to an onboard CAN FD transceiver and CANH/CANL pads; FDCAN1 exposes TX/RX for an external transceiver. The onboard 120 Ω termination is enabled by default and can be disconnected. The board also has 256 KB SRAM, 1 MB internal and 16 MB external flash, USB-C, battery charging, and XIAO-format expansion headers. Documentation and examples are listed for STM32CubeIDE, PlatformIO with Zephyr, and MicroPython. The text lists prices of $18.85 on AliExpress and $9.90 at Seeed Studio, or $10.90 for the pre-soldered version, before taxes and shipping.

### Source excerpt

Seeed Studio XIAO STM32C5 is the company's first XIAO development board based on an STMicroelectronics MCU, namely a 144 MHz STM32C5A3CG Arm Cortex-M33 microcontroller. It features two CAN FD controllers and a 6-axis IMU with programmable heating for robotics, industrial control, and motion-sensing applications. The board also includes 16MB of external flash, a 48 MHz external crystal, a USB-C port, and battery charging circuitry. One CAN FD channel is connected to an onboard transceiver, while the second requires an external transceiver. The integrated IMU heater allows firmware to control sensor temperature and reduce measurement drift from temperature changes. XIAO STM32C5 specifications: MCU - STMicroelectronics STM32C5A3CG CPU - 144 MHz Arm Cortex-M33 with FPU and DSP instructions Memory - 256KB SRAM Storage - 1MB internal flash Storage - 16MB external flash USB - USB Type-C port with USB 2.0 Full-Speed support (12 Mbps) CAN Bus 2x CAN FD controllers (FDCAN1 and [...] The post Seeed Studio XIAO STM32C5 development board features dual CAN FD and a 6-axis IMU with programmable heating appeared first on CNX Software - Embedded Systems News.

## Waveshare ESP32-S31-Zero - A tiny ESP32-S31 board with up to 32MB PSRAM, 32MB SPI flash

DevFeed: [Waveshare ESP32-S31-Zero - A tiny ESP32-S31 board with up to 32MB PSRAM, 32MB SPI flash](<https://devfeed.tech/articles/waveshare-esp32-s31-zero-a-tiny-esp32-s31-board-with-up-to-32mb-psram-32mb-spi-flash-121899.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/07/waveshare-esp32-s31-zero-a-tiny-esp32-s31-board-with-up-to-32mb-psram-32mb-spi-flash/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-07T03:00:18Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32](<https://devfeed.tech/topics/esp32.md>), [waveshare](<https://devfeed.tech/topics/waveshare.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [802.15.4](<https://devfeed.tech/topics/802-15-4.md>), [Bluetooth](<https://devfeed.tech/topics/bluetooth.md>), [USB](<https://devfeed.tech/topics/usb.md>), [ESP32-C6](<https://devfeed.tech/topics/esp32-c6.md>), [ESP32-S3](<https://devfeed.tech/topics/esp32-s3.md>)

Tags: [320-mhz](<https://devfeed.tech/tags/320-mhz.md>), [802-15-4](<https://devfeed.tech/tags/802-15-4.md>), [ble](<https://devfeed.tech/tags/ble.md>), [bluetooth](<https://devfeed.tech/tags/bluetooth.md>), [bluetooth-5-3](<https://devfeed.tech/tags/bluetooth-5-3.md>), [board](<https://devfeed.tech/tags/board.md>), [c-c-plus-plus](<https://devfeed.tech/tags/c-c-plus-plus.md>), [development](<https://devfeed.tech/tags/development.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-c6](<https://devfeed.tech/tags/esp32-c6.md>), [esp32-s3](<https://devfeed.tech/tags/esp32-s3.md>), [esp32-s31](<https://devfeed.tech/tags/esp32-s31.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [flash](<https://devfeed.tech/tags/flash.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [iot](<https://devfeed.tech/tags/iot.md>), [matter](<https://devfeed.tech/tags/matter.md>), [psram](<https://devfeed.tech/tags/psram.md>), [spi](<https://devfeed.tech/tags/spi.md>), [spi-flash](<https://devfeed.tech/tags/spi-flash.md>), [thread](<https://devfeed.tech/tags/thread.md>), [tiny](<https://devfeed.tech/tags/tiny.md>), [waveshare](<https://devfeed.tech/tags/waveshare.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>), [zero](<https://devfeed.tech/tags/zero.md>), [zigbee](<https://devfeed.tech/tags/zigbee.md>)

### AI overview

The Waveshare ESP32-S31-Zero combines a compact 28 x 18 mm board with an ESP32-S31 dual-core RISC-V MCU, USB-C, Wi-Fi 6, Bluetooth, 802.15.4, and up to 32 MB PSRAM and SPI flash. Its 40-pin connector exposes options for an LCD, touchscreen, SD card, USB 2.0, and GPIO; the article notes that Ethernet MAC pins may also be reachable there, enabling a possible expansion-board design, though this is not built into the board. Initial Linux support exists, but software maturity is still developing. Eight memory/header combinations are described in theory; the excerpt says only the N32R16 model (32 MB PSRAM, 16 MB flash, unsoldered headers) was then available.

### Source excerpt

Waveshare ESP32-S31-Zero is a small ESP32-S31 development board that follows the form factor of the earlier Waveshare "Zero" boards, such as the ESP32-C6-Zero-B, RA4M1-Zero, and ESP32-S3-Zero, among others. The new tiny board still features a USB-C port for power and programming, as well as eighteen through and castellated holes for GPIO and power signals, but it boasts a more powerful ESP32-S31 dual-core RISC-V MCU clocked at up to 320 MHz, featuring 2.4 GHz WiFi 6, Bluetooth 5.3, and 802.15.4 connectivity, as well as up to 32MB on-chip PSRAM and a 16MB or 32MB SPI flash chip. Since the ESP32-S31 has quite a few extra I/Os, Waveshare also added a 40-pin high-density connector for LCD, touchscreen, SD card, USB 2.0, and extra GPIOs. Waveshare ESP32-S31-Zero specifications: SoC - Espressif Systems ESP32-S31 CPU RISC-V HP (High-performance) RV32IMAFCP CPU @ 320 MHz with FPU, SIMD, etc. RISC-V LP (Low-power) MCU core Memory - [...] The post Waveshare ESP32-S31-Zero - A tiny ESP32-S31 board with up to 32MB PSRAM, 32MB SPI flash appeared first on CNX Software - Embedded Systems News.

## AAEON PICO-PTH4 Pico-ITX board is powered by an Intel Panther Lake SoC up to the Core Ultra X7 358H

DevFeed: [AAEON PICO-PTH4 Pico-ITX board is powered by an Intel Panther Lake SoC up to the Core Ultra X7 358H](<https://devfeed.tech/articles/aaeon-pico-pth4-pico-itx-board-is-powered-by-an-intel-panther-lake-soc-up-to-the-core-ultra-x7-358h-120334.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/06/aaeon-pico-pth4-pico-itx-board-is-powered-by-an-intel-panther-lake-soc-up-to-the-core-ultra-x7-358h/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-06T03:59:30Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [Single Board Computer](<https://devfeed.tech/topics/single-board-computer.md>), [intel](<https://devfeed.tech/topics/intel.md>), [dual 2.5GbE](<https://devfeed.tech/topics/dual-2-5gbe.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [2-5gbe](<https://devfeed.tech/tags/2-5gbe.md>), [4k](<https://devfeed.tech/tags/4k.md>), [aaeon](<https://devfeed.tech/tags/aaeon.md>), [ai](<https://devfeed.tech/tags/ai.md>), [ai-accelerator](<https://devfeed.tech/tags/ai-accelerator.md>), [ai-boost](<https://devfeed.tech/tags/ai-boost.md>), [ai-performance](<https://devfeed.tech/tags/ai-performance.md>), [artificial-intelligence-ai](<https://devfeed.tech/tags/artificial-intelligence-ai.md>), [board](<https://devfeed.tech/tags/board.md>), [cpu](<https://devfeed.tech/tags/cpu.md>), [dual-2-5gbe](<https://devfeed.tech/tags/dual-2-5gbe.md>), [edge-ai](<https://devfeed.tech/tags/edge-ai.md>), [gpio](<https://devfeed.tech/tags/gpio.md>), [gpu](<https://devfeed.tech/tags/gpu.md>), [graphics](<https://devfeed.tech/tags/graphics.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hdmi](<https://devfeed.tech/tags/hdmi.md>), [i2c](<https://devfeed.tech/tags/i2c.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [intel](<https://devfeed.tech/tags/intel.md>), [intel-core](<https://devfeed.tech/tags/intel-core.md>), [linux](<https://devfeed.tech/tags/linux.md>), [panther-lake](<https://devfeed.tech/tags/panther-lake.md>), [pico](<https://devfeed.tech/tags/pico.md>), [pico-itx](<https://devfeed.tech/tags/pico-itx.md>), [rs485](<https://devfeed.tech/tags/rs485.md>), [single-board-computer](<https://devfeed.tech/tags/single-board-computer.md>), [soc](<https://devfeed.tech/tags/soc.md>), [ubuntu](<https://devfeed.tech/tags/ubuntu.md>), [windows-11](<https://devfeed.tech/tags/windows-11.md>)

### AI overview

AAEON's PICO-PTH4 is a 100 x 72 mm Pico-ITX board offered with one of three Panther Lake processors: Core Ultra 5 325, Core Ultra 7 355, or Core Ultra X7 358H. All are listed at 25 W PBP; the X7 configuration combines CPU, GPU, and NPU for up to 180 TOPS. The board supports up to 32 GB LPDDR5X-7467, an M.2 NVMe socket, an M.2 E-Key slot, and PCIe 3.0 x4 FPC expansion. Connections include dual 2.5GbE, HDMI 2.1 up to 4K at 60 Hz, two USB 3.2 Gen 2 ports, serial headers, and GPIO. It accepts 12 V DC and operates from -20 to 70°C. AAEON lists Windows 11 64-bit and Ubuntu 26.04 support, says the board is in mass production, and recommends an optional $33 CPU cooler. Listed prices range from $1,288 for the Core Ultra 5 model to $3,065 for the X7 model.

### Source excerpt

AAEON claims the PICO-PTH4 is the world's first 2.5-inch Pico-ITX board powered by an Intel Panther Lake processor, such as the Core Ultra 5 325, Core Ultra 7 355, and Core Ultra X7 358H, delivering up to 180 TOPS of AI performance in a 100mm x 72mm form factor. The single board computer ships with up to 32GB of LPDDR5X, supports M.2 M-Key/E-Key and PCIe x4 FPC expansion, and offers dual 2.5GbE, HDMI 2.1 video output, two USB 3.2 Gen 2 ports, and internal connectors for USB 2.0, front panel, RS-232/422/485, GPIO, and SMBus/I2C. AAEON PICO-PTH4 specifications: Panther Lake SoC (one or the other) Intel Core Ultra 5 325 CPU - Octa-core (4P+4LPE) CPU up to 4.5 GHz with 12MB Smart Cache GPU - 4-core Intel Graphics @ 2.45 GHz (40 TOPS) AI accelerator - 47 TOPS Intel AI Boost NPU PBP: 25 Watts Core Ultra 7 355 CPU - [...] The post AAEON PICO-PTH4 Pico-ITX board is powered by an Intel Panther Lake SoC up to the Core Ultra X7 358H appeared first on CNX Software - Embedded Systems News.

## $21 ESP32-P4X and ESP32-C61 full-featured board offers Ethernet, WiFi 6, RS485 CAN Bus, MIPI CSI/DSI, and more

DevFeed: [$21 ESP32-P4X and ESP32-C61 full-featured board offers Ethernet, WiFi 6, RS485 CAN Bus, MIPI CSI/DSI, and more](<https://devfeed.tech/articles/21-esp32-p4x-and-esp32-c61-full-featured-board-offers-ethernet-wifi-6-rs485-can-bus-mipi-csi-dsi-and-more-116382.md>)

Original publisher: [Read original article](<https://www.cnx-software.com/2026/11/04/21-esp32-p4x-and-esp32-c61-full-featured-board-offers-ethernet-wifi-6-rs485-can-bus-mipi-csi-dsi-and-more/>)

Author: Jean-Luc Aufranc (CNXSoft)

Published: 2026-11-04T10:05:31Z

Content type: news

Language: en

Sources: [CNX Software - Embedded Systems News](<https://devfeed.tech/sources/cnx-software-embedded-systems-news.md>)

Topics: [ESP32-P4](<https://devfeed.tech/topics/esp32-p4.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [RISC-V](<https://devfeed.tech/topics/riscv.md>), [Ethernet](<https://devfeed.tech/topics/ethernet.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [ai](<https://devfeed.tech/tags/ai.md>), [ble](<https://devfeed.tech/tags/ble.md>), [board](<https://devfeed.tech/tags/board.md>), [bus](<https://devfeed.tech/tags/bus.md>), [can-bus](<https://devfeed.tech/tags/can-bus.md>), [csi](<https://devfeed.tech/tags/csi.md>), [development-board](<https://devfeed.tech/tags/development-board.md>), [display](<https://devfeed.tech/tags/display.md>), [esp32](<https://devfeed.tech/tags/esp32.md>), [esp32-p4](<https://devfeed.tech/tags/esp32-p4.md>), [espressif](<https://devfeed.tech/tags/espressif.md>), [ethernet](<https://devfeed.tech/tags/ethernet.md>), [fast](<https://devfeed.tech/tags/fast.md>), [gateways](<https://devfeed.tech/tags/gateways.md>), [h-264](<https://devfeed.tech/tags/h-264.md>), [hardware](<https://devfeed.tech/tags/hardware.md>), [hp](<https://devfeed.tech/tags/hp.md>), [industrial](<https://devfeed.tech/tags/industrial.md>), [jpeg](<https://devfeed.tech/tags/jpeg.md>), [mipi](<https://devfeed.tech/tags/mipi.md>), [mipi-csi](<https://devfeed.tech/tags/mipi-csi.md>), [rs485](<https://devfeed.tech/tags/rs485.md>), [smart-speaker](<https://devfeed.tech/tags/smart-speaker.md>), [touchscreen](<https://devfeed.tech/tags/touchscreen.md>), [video](<https://devfeed.tech/tags/video.md>), [wifi](<https://devfeed.tech/tags/wifi.md>), [wifi-6](<https://devfeed.tech/tags/wifi-6.md>), [wireless](<https://devfeed.tech/tags/wireless.md>)

### AI overview

The Wireless Tag WT99P461-S1 is a $21 development board built around the WT01P461-S1 module, with ESP32-P4X (confirmed by Wireless Tag as ESP32-P4 v3.2) and ESP32-C61. Compared with the ESP32P4C61-TINY, it adds 10/100 Mbps Ethernet, RS-485, CAN, an onboard microphone and speaker connector; it also has Wi-Fi 6/Bluetooth, microSD, MIPI DSI and CSI, and USB Type-A and Type-C ports. It has 32 MB PSRAM and supports a 7-inch touchscreen. Preloaded ESP-Brookesia firmware includes AI vision demos, MP3 and MJPEG playback, camera support, and network connectivity; H.264 playback is not yet supported. The board costs $21, or $42.50 with a 7-inch display kit, before shipping and taxes. The product page is unclear about the processor version, and the article reports that useful project resources were difficult to find.

### Source excerpt

Wireless Tag WT99P461-S1 is an ESP32-P4X and ESP32-C61 board based on the same WT01P461-S1 module as found on the ESP32P4C61-TINY board introduced last June. The main differences are that the WT99P461-S1 is a full-featured development board, adding features such as Fast Ethernet, RS-485, CAN bus, an on-board microphone, and a speaker connector. It still comes with a microSD card slot, MIPI DSI/CSI connectors, and other features, making it suitable for industrial HMIs, gateways, and control applications. WT99P461-S1 specifications: Wireless Module - Wireless-Tag WT01P461-S1 (25 x 25mm) Microcontroller - ESP32-P4X (ESP32-P4 v3.2) MCU Dual-core RISC-V microcontroller @ 360/400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU - 2D Pixel Processing Accelerator (PPA) VPU - H.264 and JPEG codec support Memory - 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM Storage - 128 KB HP ROM, 16 [...] The post $21 ESP32-P4X and ESP32-C61 full-featured board offers Ethernet, WiFi 6, RS485 CAN Bus, MIPI CSI/DSI, and more appeared first on CNX Software - Embedded Systems News.

## Development of USB support in Zephyr RTOS with the implementation of HID Boot device support

DevFeed: [Development of USB support in Zephyr RTOS with the implementation of HID Boot device support](<https://devfeed.tech/articles/development-of-usb-support-in-zephyr-rtos-with-the-implementation-of-hid-boot-device-support-106370.md>)

Original publisher: [Read original article](<https://www.zephyrproject.org/development-of-usb-support-in-zephyr-rtos-with-the-implementation-of-hid-boot-device-support/>)

Author: Zephyr Project

Published: 2026-10-29T05:00:41Z

Content type: article

Language: en

Sources: [Zephyr Project](<https://devfeed.tech/sources/zephyr-project.md>)

Topics: [Zephyr RTOS](<https://devfeed.tech/topics/zephyr-rtos.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [boot](<https://devfeed.tech/tags/boot.md>), [hid](<https://devfeed.tech/tags/hid.md>), [member-blog](<https://devfeed.tech/tags/member-blog.md>), [open-source](<https://devfeed.tech/tags/open-source.md>), [rtos](<https://devfeed.tech/tags/rtos.md>), [usb](<https://devfeed.tech/tags/usb.md>), [usb-host](<https://devfeed.tech/tags/usb-host.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

Zephyr's USB Host support gained HID Boot support through several prerequisites: multi-packet transfers let Low Speed devices send configuration descriptors larger than their 8-byte packet limit, while scheduled and rescheduled interrupt transfers provide periodic polling and prioritize time-sensitive reports. A generic HID Boot class driver sends SET_IDLE on connection, polls devices, parses reports, and exposes events through Zephyr's input subsystem. The article's example builds a mouse-and-display sample for an STM32H747I Discovery board with a MAX3421E shield; it recommends the SparkFun shield, while noting the demonstration used an Adafruit shield and that display shield choice may depend on board revision.

### Source excerpt

The open source Zephyr RTOS continues to gain popularity, and many contributors are committed to further extending Zephyr's reach by helping improve it and add additional features. An example of a feature that is being actively worked on by the community is adding USB Host support. Within this issue, work is underway for developing support for a number of USB classes, such as MSC (Mass Storage Class), CDC ECM (Communication Device Class Ethernet Control Model), or HUB.

## Development of USB support in Zephyr RTOS with the implementation of HID Boot device support

DevFeed: [Development of USB support in Zephyr RTOS with the implementation of HID Boot device support](<https://devfeed.tech/articles/development-of-usb-support-in-zephyr-rtos-with-the-implementation-of-hid-boot-device-support-106033.md>)

Original publisher: [Read original article](<https://zephyrproject.org/development-of-usb-support-in-zephyr-rtos-with-the-implementation-of-hid-boot-device-support/>)

Author: Zephyr Project

Published: 2026-10-29T05:00:41Z

Content type: tutorial

Language: en

Sources: [Zephyr Project](<https://devfeed.tech/sources/zephyr-project-2.md>)

Topics: [Zephyr RTOS](<https://devfeed.tech/topics/zephyr-rtos.md>), [USB](<https://devfeed.tech/topics/usb.md>), [Open Source](<https://devfeed.tech/topics/open-source.md>)

Tags: [blog](<https://devfeed.tech/tags/blog.md>), [boot](<https://devfeed.tech/tags/boot.md>), [class](<https://devfeed.tech/tags/class.md>), [development](<https://devfeed.tech/tags/development.md>), [hid](<https://devfeed.tech/tags/hid.md>), [implementation](<https://devfeed.tech/tags/implementation.md>), [member-blog](<https://devfeed.tech/tags/member-blog.md>), [rtos](<https://devfeed.tech/tags/rtos.md>), [usb](<https://devfeed.tech/tags/usb.md>), [usb-host](<https://devfeed.tech/tags/usb-host.md>), [zephyr](<https://devfeed.tech/tags/zephyr.md>)

### AI overview

Zephyr's USB Host subsystem gained HID Boot support through prerequisites that address the devices' transfer needs. Multi-packet transfers let Low Speed devices send configuration descriptors larger than their 8-byte maximum packet size. New interrupt-transfer scheduling, rescheduling, and prioritization support the regular, time-sensitive polling used by HID devices. A generic HID Boot driver sends SET_IDLE, polls for reports, parses key and mouse events, and exposes them through Zephyr's input subsystem. The article's test instructions use an STM32H747I Discovery board and MAX3421E shield; it recommends the SparkFun shield, notes the demo used an Adafruit version, and says display shield choice may depend on board revision.

### Source excerpt

The open source Zephyr RTOS continues to gain popularity, and many contributors are committed to further extending Zephyr's reach by helping improve it and add additional features. An example of a feature that is being actively worked on by the community is adding USB Host support. Within this issue, work is underway for developing support for a number of USB classes, such as MSC (Mass Storage Class), CDC ECM (Communication Device Class Ethernet Control Model), or HUB.

## Samsung Portable SSD P9 Review: 4,000MB/s USB4 Reads in a Metal Shell That Peaks at 40C

DevFeed: [Samsung Portable SSD P9 Review: 4,000MB/s USB4 Reads in a Metal Shell That Peaks at 40C](<https://devfeed.tech/articles/samsung-portable-ssd-p9-review-4-000mb-s-usb4-reads-in-a-metal-shell-that-peaks-at-40c-105447.md>)

Original publisher: [Read original article](<https://www.storagereview.com/review/samsung-portable-ssd-p9-review>)

Author: Brian Beeler

Published: 2026-10-28T18:23:54Z

Content type: article

Language: en

Sources: [StorageReview.com](<https://devfeed.tech/sources/storagereview-com.md>)

Topics: [USB](<https://devfeed.tech/topics/usb.md>), [samsung](<https://devfeed.tech/topics/samsung.md>)

Tags: [end-user](<https://devfeed.tech/tags/end-user.md>), [metal](<https://devfeed.tech/tags/metal.md>), [portable](<https://devfeed.tech/tags/portable.md>), [portable-ssd](<https://devfeed.tech/tags/portable-ssd.md>), [portable-storage](<https://devfeed.tech/tags/portable-storage.md>), [review](<https://devfeed.tech/tags/review.md>), [samsung](<https://devfeed.tech/tags/samsung.md>), [shell](<https://devfeed.tech/tags/shell.md>), [ssd](<https://devfeed.tech/tags/ssd.md>)

### AI overview

The Samsung Portable SSD P9 meets its rated USB4 sequential speeds, reads camera-card and large-file copies quickly, and peaked at 40°C in testing--cooler than the SanDisk, LaCie, and Lexar drives compared. Its metal shell helps dissipate heat but carries a lower 2-meter drop rating than the T9's 3 meters. The main trade-off is sustained writing: performance fell after about 149GB, reached a 540MB/s plateau, then averaged 366MB/s late in the 30-minute test; it also failed the 1,000MB/s capture step, though all tested drives passed 500MB/s. The LaCie sustained roughly 1,740-1,820MB/s and is better suited to long writes; the SanDisk led low-depth reads but ran hotter. P9 write speed also fell as the drive filled, and a heavily written, untrimmed exFAT volume showed very low random-write results; the review says formatting was the reliable remedy. Test conditions differed for the T9, and its comparisons carry that caveat.

### Source excerpt

The Samsung Portable SSD P9 is the company's first USB4 portable drive, rated at 4,000MB/s read and 3,800MB/s write. That's double the T9 it sits above. It ships in 1TB, 2TB, 4TB, and 8TB capacities; the 8TB is Samsung's first USB4 portable SSD at that size, and the 2TB unit we tested sells for $649.99 The post Samsung Portable SSD P9 Review: 4,000MB/s USB4 Reads in a Metal Shell That Peaks at 40C appeared first on StorageReview.com.

## BirriaSDR turns a USB WiFi dongle into an experimental SDR receiver

DevFeed: [BirriaSDR turns a USB WiFi dongle into an experimental SDR receiver](<https://devfeed.tech/articles/birriasdr-turns-a-usb-wifi-dongle-into-an-experimental-sdr-receiver-102409.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/27/birriasdr-turns-a-usb-wifi-dongle-into-an-experimental-sdr-receiver/>)

Author: Anne Barela

Published: 2026-10-27T17:47:16Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Dongle](<https://devfeed.tech/topics/dongle.md>), [USB](<https://devfeed.tech/topics/usb.md>), [Embedded Systems](<https://devfeed.tech/topics/embedded-systems.md>), [Library](<https://devfeed.tech/topics/library.md>)

Tags: [dongle](<https://devfeed.tech/tags/dongle.md>), [experimental](<https://devfeed.tech/tags/experimental.md>), [radio](<https://devfeed.tech/tags/radio.md>), [receiver](<https://devfeed.tech/tags/receiver.md>), [sdr](<https://devfeed.tech/tags/sdr.md>), [software](<https://devfeed.tech/tags/software.md>), [software-defined-radio](<https://devfeed.tech/tags/software-defined-radio.md>), [usb](<https://devfeed.tech/tags/usb.md>), [wifi](<https://devfeed.tech/tags/wifi.md>)

### AI overview

BirriaSDR repurposes a COMFAST MT7961/MT7921AU WiFi dongle's internal I/Q capture path to act as an experimental SDR receiver, producing 14-bit I/Q at 40 million complex samples per second. The host configures the receiver and capture engine through registers; a 1,632-byte program loaded via the chip's boot ROM streams samples over USB. It downloads no vendor firmware and writes nothing to flash or eFuse, so configuration is lost when power is removed. The project provides a C11 library with a librtlsdr-modeled API, a command-line recorder, and a rough CyberEther flowgraph. It tunes 2156-2610 MHz and 4500-6200 MHz, including during streaming. Sensitivity, frequency accuracy, and gain are not calibrated.

### Source excerpt

Luigi Cruz has published BirriaSDR on GitHub, a project that turns a USB WiFi dongle into an experimental SDR receiver with 14-bit I/Q at 40 million complex samples per second. The tested hardware is a COMFAST MT7961/MT7921AU dongle, pairing an MT7961 digital die with an MT7972 analog die. WiFi chips already contain a wideband receiver, [...]

## KDE Fixes 15 Year Old Bug Over Inaccurate Notifications When Copying Files To USB Drives

DevFeed: [KDE Fixes 15 Year Old Bug Over Inaccurate Notifications When Copying Files To USB Drives](<https://devfeed.tech/articles/kde-fixes-15-year-old-bug-over-inaccurate-notifications-when-copying-files-to-usb-drives-102398.md>)

Original publisher: [Read original article](<https://www.phoronix.com/news/KDE-Fixes-15-Year-Old-Bugs>)

Author: Michael Larabel

Published: 2026-10-27T16:50:22Z

Content type: news

Language: en

Sources: [Phoronix](<https://devfeed.tech/sources/phoronix.md>)

Topics: [bugfixes](<https://devfeed.tech/topics/bugfixes.md>), [notifications](<https://devfeed.tech/topics/notifications.md>), [USB](<https://devfeed.tech/topics/usb.md>)

Tags: [bug](<https://devfeed.tech/tags/bug.md>), [bug-reports](<https://devfeed.tech/tags/bug-reports.md>), [cache](<https://devfeed.tech/tags/cache.md>), [completion](<https://devfeed.tech/tags/completion.md>), [copy](<https://devfeed.tech/tags/copy.md>), [data](<https://devfeed.tech/tags/data.md>), [desktop](<https://devfeed.tech/tags/desktop.md>), [desktop-linux](<https://devfeed.tech/tags/desktop-linux.md>), [device](<https://devfeed.tech/tags/device.md>), [dialog](<https://devfeed.tech/tags/dialog.md>), [dolphin](<https://devfeed.tech/tags/dolphin.md>), [drive](<https://devfeed.tech/tags/drive.md>), [file](<https://devfeed.tech/tags/file.md>), [files](<https://devfeed.tech/tags/files.md>), [flash](<https://devfeed.tech/tags/flash.md>), [frameworks](<https://devfeed.tech/tags/frameworks.md>), [kde](<https://devfeed.tech/tags/kde.md>), [kde-plasma](<https://devfeed.tech/tags/kde-plasma.md>), [linux](<https://devfeed.tech/tags/linux.md>), [linux-benchmarking](<https://devfeed.tech/tags/linux-benchmarking.md>), [linux-hardware-benchmarks](<https://devfeed.tech/tags/linux-hardware-benchmarks.md>), [linux-hardware-reviews](<https://devfeed.tech/tags/linux-hardware-reviews.md>), [linux-how-to](<https://devfeed.tech/tags/linux-how-to.md>), [linux-performance](<https://devfeed.tech/tags/linux-performance.md>), [linux-server-benchmarks](<https://devfeed.tech/tags/linux-server-benchmarks.md>), [notifications](<https://devfeed.tech/tags/notifications.md>), [open-source-graphics](<https://devfeed.tech/tags/open-source-graphics.md>), [phoronix](<https://devfeed.tech/tags/phoronix.md>), [phoronix-test-suite](<https://devfeed.tech/tags/phoronix-test-suite.md>), [ubuntu-benchmarks](<https://devfeed.tech/tags/ubuntu-benchmarks.md>), [ubuntu-hardware](<https://devfeed.tech/tags/ubuntu-hardware.md>), [usb](<https://devfeed.tech/tags/usb.md>)

### AI overview

KDE Frameworks 6.32 is reported to fix inaccurate copy-completion notifications for removable storage. Previously, progress could appear complete once data reached the local cache, before it had been written to the USB drive. KIO now uses Linux's sync_file_range() call to wait for writeback; the article says the working approach waits for the window before the one just written, because waiting for the newly written chunk could miss writeback that had not started. Earlier attempts and an alternative proposal to disable caching did not resolve the issue. The text says the Disks & Devices applet had already been changed to explain when a device is still writing during ejection.

### Source excerpt

A long-standing KDE bug is set to be resolved with next month's KDE Frameworks 6.32 release...

## Quake II for RP2350: HDMI, 8 MB PSRAM, USB keyboard and mouse, I2S audio

DevFeed: [Quake II for RP2350: HDMI, 8 MB PSRAM, USB keyboard and mouse, I2S audio](<https://devfeed.tech/articles/quake-ii-for-rp2350-hdmi-8-mb-psram-usb-keyboard-and-mouse-i2s-audio-100711.md>)

Original publisher: [Read original article](<https://blog.adafruit.com/2026/10/26/quake-ii-for-rp2350-hdmi-8-mb-psram-usb-keyboard-and-mouse-i2s-audio/>)

Author: Anne Barela

Published: 2026-10-26T18:52:03Z

Content type: news

Language: en

Sources: [Adafruit Industries](<https://devfeed.tech/sources/adafruit-industries-makers-hackers-artists-designers-and-engineers.md>)

Topics: [Raspberry Pi RP2350](<https://devfeed.tech/topics/raspberry-pi-rp2350.md>), [hdmi](<https://devfeed.tech/topics/hdmi.md>), [PSRAM](<https://devfeed.tech/topics/psram.md>), [USB](<https://devfeed.tech/topics/usb.md>), [IO](<https://devfeed.tech/topics/io.md>)

Tags: [audio](<https://devfeed.tech/tags/audio.md>), [gaming](<https://devfeed.tech/tags/gaming.md>), [hdmi](<https://devfeed.tech/tags/hdmi.md>), [keyboard](<https://devfeed.tech/tags/keyboard.md>), [mouse](<https://devfeed.tech/tags/mouse.md>), [psram](<https://devfeed.tech/tags/psram.md>), [quake-ii](<https://devfeed.tech/tags/quake-ii.md>), [raspberry-pi](<https://devfeed.tech/tags/raspberry-pi.md>), [rp2350](<https://devfeed.tech/tags/rp2350.md>)

### AI overview

The work-in-progress frank-quake2 port runs Quake II on RP2350 boards, with HDMI output on FRANK and Murmulator M2 via HSTX and on Waveshare RP2350-PiZero via PIO. Input uses a USB keyboard and mouse; audio is available over HDMI or through an I2S DAC. It is based on the ESP32-S3 Quake II port, with the software renderer and baseq2, and uses frank-castle's platform layer. Since 8 MB of PSRAM cannot hold the maps, models and skins are read from flash. First boot builds an approximately 14 MB image from pak files, takes about 90 seconds, and restarts; boards with 8 MB flash receive a smaller image that omits the largest assets. The repository does not include game data; a retail copy patched to version 3.20 is required.

### Source excerpt

Developer rh1tech has posted frank-quake2 on GitHub, a port of Quake II that runs on the RP2350. It targets the FRANK and Murmulator M2 boards, which output HDMI over HSTX, and the Waveshare RP2350-PiZero, which does HDMI through PIO. Sound comes out over HDMI or from an I2S DAC. A USB keyboard and mouse handle [...]

[Next page](<https://devfeed.tech/topics/usb.md?cursor=WyIyMDI2LTEwLTI2VDE4OjUyOjAzKzAwOjAwIiwgImVkNjg2NmJmLTY2NGItNGMyZC04YTgxLWYwYTA3ZjI5NDdhNiJd>)